Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
SLAPD-CONFIG(5)		      File Formats Manual	       SLAPD-CONFIG(5)

NAME
       slapd-config - configuration backend to slapd

SYNOPSIS
       /usr/local/etc/openldap/slapd.d

DESCRIPTION
       The config backend manages all of the configuration information for the
       slapd(8)	daemon.	 This configuration information	is also	 used  by  the
       SLAPD tools slapacl(8), slapadd(8), slapauth(8),	slapcat(8), slapdn(8),
       slapindex(8), slapmodify(8), and	slaptest(8).

       The config backend is backward compatible with the older	 slapd.conf(5)
       file  but  provides the ability to change the configuration dynamically
       at runtime. If slapd is run with	only a slapd.conf file dynamic changes
       will  be	allowed	but they will not persist across a server restart. Dy-
       namic changes are only saved when slapd is running from a slapd.d  con-
       figuration directory.

       Unlike  other  backends,	 there	can only be one	instance of the	config
       backend,	and most of its	structure is predefined. The root of the data-
       base is hardcoded to cn=config and this root entry contains global set-
       tings for slapd.	Multiple child entries underneath the root  entry  are
       used to carry various other settings:

	      cn=Module
		     dynamically loaded	modules

	      cn=Schema
		     schema definitions

	      olcBackend=xxx
		     backend-specific settings

	      olcDatabase=xxx
		     database-specific settings

       The  cn=Module  entries	will only appear in configurations where slapd
       was built with support for dynamically loaded  modules.	There  can  be
       multiple	 entries, one for each configured module path. Within each en-
       try there will be values	recorded for each module  loaded  on  a	 given
       path. These entries have	no children.

       The cn=Schema entry contains all	of the hardcoded schema	elements.  The
       children	of this	entry contain all user-defined	schema	elements.   In
       schema  that  were  loaded  from	include	files, the child entry will be
       named after the include file from which the schema was  loaded.	 Typi-
       cally the first child in	this subtree will be cn=core,cn=schema,cn=con-
       fig.

       olcBackend entries are for storing settings specific to a single	 back-
       end  type (and thus global to all database instances of that type).  At
       present,	only back-mdb implements any options of	 this  type,  so  this
       setting is not needed for any other backends.

       olcDatabase  entries  store  settings specific to a single database in-
       stance. These entries may have olcOverlay child	entries	 corresponding
       to  any overlays	configured on the database. The	olcDatabase and	olcOv-
       erlay entries may also have miscellaneous child entries for other  set-
       tings as	needed.	There are two special database entries that are	prede-
       fined - one is an entry for the config database itself, and  the	 other
       is  for	the "frontend" database. Settings in the frontend database are
       inherited by the	other databases, unless	they are explicitly overridden
       in a specific database.

       The specific configuration options available are	discussed below	in the
       Global Configuration Options,  General  Backend	Options,  and  General
       Database	Options. Options are set by defining LDAP attributes with spe-
       cific values.  In general the names of the LDAP attributes are the same
       as the corresponding slapd.conf keyword,	with an	"olc" prefix added on.

       The parser for many of these attributes is the same as used for parsing
       the slapd.conf keywords.	As such, slapd.conf keywords that allow	multi-
       ple  items  to  be specified on one line, separated by whitespace, will
       allow multiple items to be specified in one attribute  value.  However,
       when  reading the attribute via LDAP, the items will be returned	as in-
       dividual	attribute values.

       Backend-specific	options	are discussed in the slapd-<backend>(5)	manual
       pages.	Refer to the "OpenLDAP Administrator's Guide" for more details
       on configuring slapd.

GLOBAL CONFIGURATION OPTIONS
       Options described in this section apply to the server as	a whole.   Ar-
       guments	that  should  be replaced by actual text are shown in brackets
       <>.

       These options may only be specified in the cn=config entry. This	 entry
       must have an objectClass	of olcGlobal.

       olcAllows: <features>
	      Specify  a set of	features to allow (default none).  bind_v2 al-
	      lows acceptance of LDAPv2	bind  requests.	  Note	that  slapd(8)
	      does  not	 truly	implement LDAPv2 (RFC 1777), now Historic (RFC
	      3494).  bind_anon_cred allows anonymous  bind  when  credentials
	      are  not	empty  (e.g.   when DN is empty).  bind_anon_dn	allows
	      unauthenticated (anonymous) bind when  DN	 is  not  empty.   up-
	      date_anon	 allows	 unauthenticated (anonymous) update operations
	      to be processed (subject to access controls and  other  adminis-
	      trative	limits).    proxy_authz_anon   allows  unauthenticated
	      (anonymous) proxy	authorization control to be processed (subject
	      to  access controls, authorization and other administrative lim-
	      its).

       olcArgsFile: <filename>
	      The (absolute) name of a file that will hold the slapd  server's
	      command line (program name and options).

       olcAttributeOptions: <option-name>...
	      Define  tagging  attribute options or option tag/range prefixes.
	      Options must not end with	`-', prefixes must end with `-'.   The
	      `lang-'  prefix  is  predefined.	If you use the olcAttributeOp-
	      tions directive, `lang-' will no longer be defined and you  must
	      specify it explicitly if you want	it defined.

	      An  attribute  description with a	tagging	option is a subtype of
	      that attribute description without the option.  Except for that,
	      options  defined	this  way have no special semantics.  Prefixes
	      defined this way work like the `lang-' options:  They  define  a
	      prefix  for  tagging options starting with the prefix.  That is,
	      if you define the	 prefix	 `x-foo-',  you	 can  use  the	option
	      `x-foo-bar'.   Furthermore,  in a	search or compare, a prefix or
	      range name (with a trailing `-') matches	all  options  starting
	      with  that  name,	as well	as the option with the range name sans
	      the trailing `-'.	 That is, `x-foo-bar-' matches `x-foo-bar' and
	      `x-foo-bar-baz'.

	      RFC 4520 reserves	options	beginning with `x-' for	private	exper-
	      iments.  Other options should be registered with IANA,  see  RFC
	      4520  section  3.5.  OpenLDAP also has the `binary' option built
	      in, but this is a	transfer option, not a tagging option.

       olcAuthIDRewrite: <rewrite-rule>
	      Used by the authentication  framework  to	 convert  simple  user
	      names  to	 an LDAP DN used for authorization purposes.  Its pur-
	      pose is analogous	to that	of olcAuthzRegexp  (see	 below).   The
	      rewrite-rule  is	a set of rules analogous to those described in
	      slapo-rwm(5) for data rewriting (after stripping the  rwm-  pre-
	      fix).   olcAuthIDRewrite and olcAuthzRegexp should not be	inter-
	      mixed.

       olcAuthzPolicy: <policy>
	      Used to specify which rules  to  use  for	 Proxy	Authorization.
	      Proxy  authorization  allows  a  client  to  authenticate	to the
	      server using one user's credentials,  but	 specify  a  different
	      identity	to  use	for authorization and access control purposes.
	      It essentially allows user A to login as user B, using user  A's
	      password.	  The  none flag disables proxy	authorization. This is
	      the default setting.  The	from flag will use rules  in  the  au-
	      thzFrom attribute	of the authorization DN.  The to flag will use
	      rules in the authzTo attribute of	the  authentication  DN.   The
	      any  flag, an alias for the deprecated value of both, will allow
	      any of the above,	whatever succeeds first	(checked in  to,  from
	      sequence.	 The all flag requires both authorizations to succeed.

	      The rules	are mechanisms to specify which	identities are allowed
	      to perform proxy authorization.  The authzFrom attribute	in  an
	      entry  specifies which other users are allowed to	proxy login to
	      this entry. The authzTo attribute	in an  entry  specifies	 which
	      other  users  this  user can authorize as.  Use of authzTo rules
	      can be easily abused if users are	 allowed  to  write  arbitrary
	      values to	this attribute.	 In general the	authzTo	attribute must
	      be protected with	ACLs such that only privileged users can  mod-
	      ify  it.	 The value of authzFrom	and authzTo describes an iden-
	      tity or a	set of identities; it can take five forms:

		     ldap:///<base>??[<scope>]?<filter>
		     dn[.<dnstyle>]:<pattern>
		     u[.<mech>[<realm>]]:<pattern>
		     group[/objectClass[/attributeType]]:<pattern>
		     <pattern>

		     <dnstyle>:={exact|onelevel|children|subtree|regex}

	      The first	form is	a valid	LDAP URI where the _host_:_port_,  the
	      _attrs_  and  the	 _extensions_ portions must be absent, so that
	      the search occurs	locally	on either authzFrom or authzTo.

	      The second form is a DN, with the	optional style	modifiers  ex-
	      act,  onelevel, children,	and subtree for	exact, onelevel, chil-
	      dren and subtree matches,	which cause _pattern_ to be normalized
	      according	 to  the  DN normalization rules, or the special regex
	      style, which causes the _pattern_	 to  be	 treated  as  a	 POSIX
	      (''extended'')  regular  expression,  as	discussed  in regex(7)
	      and/or re_format(7).  A pattern of * means any non-anonymous DN.

	      The third	form is	a SASL id, with	the optional fields _mech_ and
	      _realm_ that allow to specify a SASL mechanism, and eventually a
	      SASL realm, for those mechanisms that support one.  The need  to
	      allow  the  specification	 of  a mechanism is still debated, and
	      users are	strongly discouraged to	rely on	this possibility.

	      The fourth form is a group specification.	 It  consists  of  the
	      keyword  group,  optionally followed by the specification	of the
	      group objectClass	and attributeType.  The	 objectClass  defaults
	      to  groupOfNames.	  The  attributeType  defaults to member.  The
	      group with DN <pattern> is searched with base scope, filtered on
	      the  specified  objectClass.   The  values  of the resulting at-
	      tributeType are searched for the asserted	DN.

	      The fifth	form is	provided for backwards compatibility.	If  no
	      identity	type  is  provided, i.e. only <pattern>	is present, an
	      exact DN is assumed; as a	consequence, <pattern> is subjected to
	      DN normalization.

	      Since the	interpretation of authzFrom and	authzTo	can impact se-
	      curity, users are	strongly encouraged to explicitly set the type
	      of identity specification	that is	being used.  A subset of these
	      rules can	be used	as third arg in	the  olcAuthzRegexp  statement
	      (see  below); significantly, the URI, provided it	results	in ex-
	      actly one	entry, and the dn.exact:_dn_ forms.

       olcAuthzRegexp: <match> <replace>
	      Used by the authentication  framework  to	 convert  simple  user
	      names,  such  as	provided  by SASL subsystem, or	extracted from
	      certificates in case of cert-based SASL  EXTERNAL,  or  provided
	      within  the RFC 4370 "proxied authorization" control, to an LDAP
	      DN used for authorization	purposes.  Note	that the resulting  DN
	      need  not	 refer	to  an	existing entry to be considered	valid.
	      When an authorization request is received	from the SASL  subsys-
	      tem,  the	 SASL  USERNAME,  REALM, and MECHANISM are taken, when
	      available, and combined into a name of the form

		     UID=<username>[[,CN=<realm>],CN=<mechanism>],CN=auth

	      This name	is  then  compared  against  the  match	 POSIX	(''ex-
	      tended'')	 regular  expression,  and if the match	is successful,
	      the name is replaced with	the  replace  string.	If  there  are
	      wildcard	strings	 in  the match regular expression that are en-
	      closed in	parenthesis, e.g.

		     UID=([^,]*),CN=.*

	      then the portion of the name that	matched	the wildcard  will  be
	      stored  in  the  numbered	 placeholder variable $1. If there are
	      other wildcard strings in	parenthesis, the matching strings will
	      be  in  $2, $3, etc. up to $9. The placeholders can then be used
	      in the replace string, e.g.

		     UID=$1,OU=Accounts,DC=example,DC=com

	      The replaced name	can be either a	DN, i.e. a string prefixed  by
	      "dn:",  or  an LDAP URI.	If the latter, the server will use the
	      URI to search its	own database(s)	and, if	the search returns ex-
	      actly  one  entry, the name is replaced by the DN	of that	entry.
	      The LDAP URI must	have no	hostport, attrs, or extensions	compo-
	      nents, but the filter is mandatory, e.g.

		     ldap:///OU=Accounts,DC=example,DC=com??one?(UID=$1)

	      The  protocol  portion  of  the URI must be strictly ldap.  Note
	      that this	search is subject to access  controls.	 Specifically,
	      the  authentication identity must	have "auth" access in the sub-
	      ject.

	      Multiple olcAuthzRegexp values can be  specified	to  allow  for
	      multiple	matching  and  replacement patterns. The matching pat-
	      terns are	checked	in the order they  appear  in  the  attribute,
	      stopping at the first successful match.

       olcConcurrency: <integer>
	      Specify  a desired level of concurrency.	Provided to the	under-
	      lying thread system as a hint.  The default is  not  to  provide
	      any  hint.  This	setting	 is  only meaningful on	some platforms
	      where there is not a one	to  one	 correspondence	 between  user
	      threads and kernel threads.

       olcConnMaxPending: <integer>
	      Specify  the maximum number of pending requests for an anonymous
	      session.	If requests are	submitted faster than the  server  can
	      process them, they will be queued	up to this limit. If the limit
	      is exceeded, the session is closed. The default is 100.

       olcConnMaxPendingAuth: <integer>
	      Specify the maximum number of pending requests for an  authenti-
	      cated session.  The default is 1000.

       olcDisallows: <features>
	      Specify a	set of features	to disallow (default none).  bind_anon
	      disables acceptance of anonymous bind requests.  Note that  this
	      setting  does  not prohibit anonymous directory access (See "re-
	      quire authc").  bind_simple disables simple  (bind)  authentica-
	      tion.   tls_2_anon  disables forcing session to anonymous	status
	      (see also	tls_authc) upon	StartTLS operation receipt.  tls_authc
	      disallows	 the  StartTLS	operation  if  authenticated (see also
	      tls_2_anon).  proxy_authz_non_critical  disables	acceptance  of
	      the proxied authorization	control	(RFC4370) with criticality set
	      to FALSE.	 dontusecopy_non_critical disables acceptance  of  the
	      dontUseCopy control (a work in progress) with criticality	set to
	      FALSE.

       olcGentleHUP: { TRUE | FALSE }
	      A	SIGHUP signal will only	 cause	a  'gentle'  shutdown-attempt:
	      Slapd  will  stop	 listening  for	 new connections, but will not
	      close the	connections to the current clients.  Future write  op-
	      erations	return unwilling-to-perform, though.  Slapd terminates
	      when all clients have closed their  connections  (if  they  ever
	      do), or -	as before - if it receives a SIGTERM signal.  This can
	      be useful	if you wish to terminate the server and	 start	a  new
	      slapd  server with another database, without disrupting the cur-
	      rently active clients.  The default is FALSE.  You may  wish  to
	      use olcIdleTimeout along with this option.

       olcIdleTimeout: <integer>
	      Specify the number of seconds to wait before forcibly closing an
	      idle client connection.  A setting of 0 disables	this  feature.
	      The  default  is 0. You may also want to set the olcWriteTimeout
	      option.

       olcIndexHash64: { on | off }
	      Use a 64 bit hash	for indexing. The default is  to  use  32  bit
	      hashes.  These hashes are	used for equality and substring	index-
	      ing. The 64 bit version may be needed to avoid index  collisions
	      when  the	 number	 of  indexed values exceeds ~64	million. (Note
	      that substring indexing generates	multiple index values per  ac-
	      tual attribute value.)  Indices generated	with 32	bit hashes are
	      incompatible with	the 64 bit version, and	vice versa. Any	exist-
	      ing databases must be fully reloaded when	changing this setting.
	      This directive is	only supported on 64 bit CPUs.

       olcIndexIntLen: <integer>
	      Specify the key length for ordered  integer  indices.  The  most
	      significant  bytes  of the binary	integer	will be	used for index
	      keys. The	default	value is 4, which provides exact indexing  for
	      31 bit values.  A	floating point representation is used to index
	      too large	values.

       olcIndexSubstrIfMaxlen: <integer>
	      Specify the maximum length for subinitial	and subfinal  indices.
	      Only  this  many	characters  of an attribute value will be pro-
	      cessed by	the indexing functions;	any excess characters are  ig-
	      nored. The default is 4.

       olcIndexSubstrIfMinlen: <integer>
	      Specify  the minimum length for subinitial and subfinal indices.
	      An attribute value must have at least this  many	characters  in
	      order  to	be processed by	the indexing functions.	The default is
	      2.

       olcIndexSubstrAnyLen: <integer>
	      Specify the length used for subany indices. An  attribute	 value
	      must  have  at  least  this  many	characters in order to be pro-
	      cessed. Attribute	values longer than this	length	will  be  pro-
	      cessed  in segments of this length. The default is 4. The	subany
	      index will also be used in subinitial and	subfinal index lookups
	      when the filter string is	longer than the	olcIndexSubstrIfMaxlen
	      value.

       olcIndexSubstrAnyStep: <integer>
	      Specify the steps	used in	subany index lookups. This value  sets
	      the  offset  for	the  segments of a filter string that are pro-
	      cessed for a subany index	lookup.	The default is 2. For example,
	      with  the	default	values,	a search using this filter "cn=*abcde-
	      fgh*" would generate  index  lookups  for	 "abcd",  "cdef",  and
	      "efgh".

       Note:  Indexing support depends on the particular backend in use. Also,
       changing	these settings will generally  require	deleting  any  indices
       that depend on these parameters and recreating them with	slapindex(8).

       olcListenerThreads: <integer>
	      Specify the number of threads to use for the connection manager.
	      The default is 1 and this	is typically adequate for up to	16 CPU
	      cores.  The value	should be set to a power of 2.

       olcLocalSSF: <SSF>
	      Specifies	 the  Security Strength	Factor (SSF) to	be given local
	      LDAP sessions, such as those to the ldapi://  listener.	For  a
	      description  of  SSF values, see olcSaslSecProps's minssf	option
	      description.  The	default	is 71.

       olcLogFile: <filename>
	      Specify a	file for recording slapd debug	messages.  By  default
	      these  messages  only  go	 to  stderr, are not recorded anywhere
	      else, and	are unrelated to messages exposed by  the  olcLogLevel
	      configuration parameter. Specifying a logfile copies messages to
	      both stderr and the logfile.

       olcLogFileFormat: debug | syslog-utc | syslog-localtime
	      Specify the prefix format	for messages written to	 the  logfile.
	      The  debug format	is the normal format used for slapd debug mes-
	      sages, with a timestamp in hexadecimal, followed by a thread ID.
	      The  other  options  are	to  use	syslog(3) style	prefixes, with
	      timestamps either	in UTC or in the local timezone.  The  default
	      is debug format.

       olcLogFileOnly: TRUE | FALSE
	      Specify  that  debug  messages  should only go to	the configured
	      logfile, and not to stderr.

       olcLogFileRotate: <max> <Mbytes>	<hours>
	      Specify automatic	rotation for the  configured  logfile  as  the
	      maximum  number  of  old	logfiles  to retain, a maximum size in
	      megabytes	to allow a logfile to grow before rotation, and	a max-
	      imum  age	in hours for a logfile to be used before rotation. The
	      maximum number must be in	the range  1-99.   Setting  Mbytes  or
	      hours  to	zero disables the size or age check, respectively.  At
	      least one	of Mbytes or hours must	be non-zero. By	default	no au-
	      tomatic rotation will be performed.

       olcLogLevel: <integer> [...]
	      Specify  the  level  at which debugging statements and operation
	      statistics should	be syslogged (currently	 logged	 to  the  sys-
	      logd(8)  LOG_LOCAL4  facility).  They must be considered subsys-
	      tems rather than increasingly verbose log	levels.	 Some messages
	      with  higher  priority  are  logged regardless of	the configured
	      loglevel as soon as any logging is configured.  Log  levels  are
	      additive,	and available levels are:
		     1	    (0x1 trace)	trace function calls
		     2	    (0x2 packets) debug	packet handling
		     4	    (0x4 args) heavy trace debugging (function args)
		     8	    (0x8 conns)	connection management
		     16	    (0x10 BER) print out packets sent and received
		     32	    (0x20 filter) search filter	processing
		     64	    (0x40 config) configuration	file processing
		     128    (0x80 ACL) access control list processing
		     256    (0x100  stats)  connections,  LDAP operations, re-
			    sults (recommended)
		     512    (0x200 stats2) stats2 log entries sent
		     1024   (0x400 shell) print	communication with shell back-
			    ends
		     2048   (0x800 parse) entry	parsing

		     16384  (0x4000 sync) LDAPSync replication
		     32768  (0x8000  none) only	messages that get logged what-
			    ever log level is set
	      The desired log level can	be input as a single integer that com-
	      bines the	(ORed) desired levels, both in decimal or in hexadeci-
	      mal notation, as a list of integers (that	are ORed  internally),
	      or  as  a	 list of the names that	are shown between parenthesis,
	      such that

		  olcLogLevel: 129
		  olcLogLevel: 0x81
		  olcLogLevel: 128 1
		  olcLogLevel: 0x80 0x1
		  olcLogLevel: acl trace

	      are equivalent.  The keyword any can be used as  a  shortcut  to
	      enable  logging  at  all levels (equivalent to -1).  The keyword
	      none, or the equivalent  integer	representation,	 causes	 those
	      messages	that  are  logged  regardless  of  the	configured ol-
	      cLogLevel	to be logged.  In fact,	if  no	olcLogLevel  (or  a  0
	      level) is	defined, no logging occurs, so at least	the none level
	      is required to have high priority	messages logged.

	      Note that	the packets, BER, and parse levels are only  available
	      as debug output on stderr, and are not sent to syslog.

	      This  setting defaults to	stats.	This level should usually also
	      be included when using other  loglevels,	to  help  analyze  the
	      logs.

       olcMaxFilterDepth: <integer>
	      Specify  the maximum depth of nested filters in search requests.
	      The default is 1000.

       olcPasswordCryptSaltFormat: <format>
	      Specify the format of the	salt passed to crypt(3)	when  generat-
	      ing {CRYPT} passwords (see olcPasswordHash) during processing of
	      LDAP Password Modify Extended Operations (RFC 3062).

	      This string needs	to be in sprintf(3) format and may include one
	      (and  only  one) %s conversion.  This conversion will be substi-
	      tuted with a string of  random  characters  from	[A-Za-z0-9./].
	      For  example, "%.2s" provides a two character salt and "$1$%.8s"
	      tells some versions of crypt(3) to use an	MD5 algorithm and pro-
	      vides  8	random characters of salt.  The	default	is "%s", which
	      provides 31 characters of	salt.

       olcPidFile: <filename>
	      The (absolute) name of a file that will hold the slapd  server's
	      process ID (see getpid(2)).

       olcPluginLogFile: <filename>
	      The  (  absolute ) name of a file	that will contain log messages
	      from SLAPI plugins. See slapd.plugin(5) for details.

       olcReferral: <url>
	      Specify the referral to pass back	when slapd(8)  cannot  find  a
	      local  database  to  handle  a  request.	If multiple values are
	      specified, each url is provided.

       olcReverseLookup: TRUE |	FALSE
	      Enable/disable client name unverified reverse lookup (default is
	      FALSE if compiled	with --enable-rlookups).

       olcRootDSE: <file>
	      Specify  the name	of an LDIF(5) file containing user defined at-
	      tributes for the root DSE.  These	attributes are returned	in ad-
	      dition to	the attributes normally	produced by slapd.

	      The  root	 DSE is	an entry with information about	the server and
	      its capabilities,	in operational attributes.  It has  the	 empty
	      DN, and can be read with e.g.:
		  ldapsearch -x	-b "" -s base "+"
	      See RFC 4512 section 5.1 for details.

       olcSaslAuxprops:	<plugin> [...]
	      Specify which auxprop plugins to use for authentication lookups.
	      The default is empty, which just uses slapd's internal  support.
	      Usually no other auxprop plugins are needed.

       olcSaslAuxpropsDontUseCopy: <attr> [...]
	      Specify  which  attribute(s)  should be subject to the don't use
	      copy control. This is necessary for some SASL mechanisms such as
	      OTP   to	 work  in  a  replicated  environment.	The  attribute
	      "cmusaslsecretOTP" is the	default	value.

       olcSaslAuxpropsDontUseCopyIgnore	TRUE | FALSE
	      Used to disable replication of the attribute(s) defined by  olc-
	      SaslAuxpropsDontUseCopy  and  instead  use a local value for the
	      attribute. This allows the SASL mechanism	to continue to work if
	      the  provider  is	 offline. This can cause replication inconsis-
	      tency. Defaults to FALSE.

       olcSaslHost: <fqdn>
	      Used to specify the fully	qualified domain name  used  for  SASL
	      processing.

       olcSaslRealm: <realm>
	      Specify SASL realm.  Default is empty.

       olcSaslCbinding:	none | tls-unique | tls-endpoint
	      Specify	   the	    channel-binding	type,	  see	  also
	      LDAP_OPT_X_SASL_CBINDING.	 Default is none.

       olcSaslSecProps:	<properties>
	      Used to specify Cyrus SASL security properties.  The  none  flag
	      (without	any  other  properties)	causes the flag	properties de-
	      fault, "noanonymous,noplain", to be cleared.  The	 noplain  flag
	      disables	mechanisms susceptible to simple passive attacks.  The
	      noactive flag disables mechanisms	susceptible to active attacks.
	      The  nodict flag disables	mechanisms susceptible to passive dic-
	      tionary attacks.	The noanonymous	flag disables mechanisms which
	      support  anonymous  login.   The forwardsec flag require forward
	      secrecy between sessions.	 The passcred require mechanisms which
	      pass  client  credentials	 (and  allow mechanisms	which can pass
	      credentials to do	so).  The minssf=<factor>  property  specifies
	      the  minimum  acceptable	security strength factor as an integer
	      approximate to effective key  length  used  for  encryption.   0
	      (zero)  implies  no  protection,	1 implies integrity protection
	      only, 128	allows RC4, Blowfish and other	similar	 ciphers,  256
	      will   require   modern	ciphers.    The	 default  is  0.   The
	      maxssf=<factor> property specifies the maximum acceptable	 secu-
	      rity  strength  factor  as  an integer (see minssf description).
	      The default is INT_MAX.  The maxbufsize=<size>  property	speci-
	      fies  the	maximum	security layer receive buffer size allowed.  0
	      disables security	layers.	 The default is	65536.

       olcServerID: <integer> [<URL>]
	      Specify an integer ID from 0 to 4095 for this server. The	ID may
	      also  be	specified  as  a hexadecimal ID	by prefixing the value
	      with "0x".  Non-zero IDs are required when using	multi-provider
	      replication  and	each  provider must have a unique non-zero ID.
	      Note that	this requirement also applies  to  separate  providers
	      contributing  to	a  glued set of	databases.  If the URL is pro-
	      vided, this directive may	be specified multiple times, providing
	      a	 complete  list	 of  participating  servers and	their IDs. The
	      fully qualified hostname of each server should be	 used  in  the
	      supplied URLs. The IDs are used in the "replica id" field	of all
	      CSNs generated by	the specified server.  The  default  value  is
	      zero,  which is only valid for single provider replication.  Ex-
	      ample:

	    olcServerID: 1 ldap://ldap1.example.com
	    olcServerID: 2 ldap://ldap2.example.com

       olcSockbufMaxIncoming: <integer>
	      Specify the maximum incoming LDAP	PDU size  for  anonymous  ses-
	      sions.  The default is 262143.

       olcSockbufMaxIncomingAuth: <integer>
	      Specify  the  maximum  incoming  LDAP PDU	size for authenticated
	      sessions.	 The default is	4194303.

       olcTCPBuffer [listener=<URL>] [{read|write}=]<size>
	      Specify the size of the TCP buffer.  A  global  value  for  both
	      read  and	 write TCP buffers related to any listener is defined,
	      unless the listener is explicitly	specified, or either the  read
	      or  write	 qualifiers  are  used.	 See tcp(7) for	details.  Note
	      that some	OS-es implement	automatic TCP buffer tuning.

       olcThreads: <integer>
	      Specify the maximum size of the primary thread  pool.   The  de-
	      fault is 16; the minimum value is	2.

       olcThreadQueues:	<integer>
	      Specify  the number of work queues to use	for the	primary	thread
	      pool.  The default is 1 and this is typically adequate for up to
	      8	 CPU cores.  The value should not exceed the number of CPUs in
	      the system.

       olcToolThreads: <integer>
	      Specify the maximum number of threads to use in tool mode.  This
	      should  not  be  greater	than the number	of CPUs	in the system.
	      The default is 1.

       olcWriteTimeout:	<integer>
	      Specify the number of seconds to wait before forcibly closing  a
	      connection with an outstanding write.  This allows recovery from
	      various network hang conditions.	A setting of 0	disables  this
	      feature.	The default is 0.

TLS OPTIONS
       If  slapd is built with support for Transport Layer Security, there are
       more options you	can specify.

       olcTLSCipherSuite: <cipher-suite-spec>
	      Permits configuring what ciphers will be accepted	and the	 pref-
	      erence order.  <cipher-suite-spec> should	be a cipher specifica-
	      tion for the TLS library in use (OpenSSL or GnuTLS).  Example:

		     OpenSSL:
			    olcTLSCipherSuite: HIGH:MEDIUM:+SSLv2

		     GnuTLS:
			    olcTLSCiphersuite: SECURE256:!AES-128-CBC

	      To check what ciphers a given spec selects in OpenSSL, use:

		   openssl ciphers -v <cipher-suite-spec>

	      With GnuTLS the available	specs can be found in the manual  page
	      of gnutls-cli(1) (see the	description of the option --priority).

	      In  older	 versions of GnuTLS, where gnutls-cli does not support
	      the option --priority, you can obtain the	 --  more  limited  --
	      list of ciphers by calling:

		   gnutls-cli -l

       olcTLSCACertificateFile:	<filename>
	      Specifies	 the  file  that  contains certificates	for all	of the
	      Certificate Authorities that slapd will recognize.  The certifi-
	      cate  for	 the CA	that signed the	server certificate must	be in-
	      cluded among these certificates. If the signing  CA  was	not  a
	      top-level	 (root)	 CA,  certificates  for	the entire sequence of
	      CA's from	the signing CA to the top-level	CA should be  present.
	      Multiple certificates are	simply appended	to the file; the order
	      is not significant.

       olcTLSCACertificatePath:	<path>
	      Specifies	the path of directories	that contain  Certificate  Au-
	      thority  certificates in separate	individual files. Usually only
	      one of this or the olcTLSCACertificateFile is defined.  If  both
	      are specified, both locations will be used. Multiple directories
	      may be specified,	separated by a semi-colon.

       olcTLSCertificateFile: <filename>
	      Specifies	the file that contains the slapd server	certificate.

	      When using OpenSSL that file may also contain any	number of  in-
	      termediate certificates after the	server certificate.

       olcTLSCertificateKeyFile: <filename>
	      Specifies	 the  file  that contains the slapd server private key
	      that matches the certificate stored in the olcTLSCertificateFile
	      file. If the private key is protected with a password, the pass-
	      word must	be manually typed in when slapd	starts.	  Usually  the
	      private  key is not protected with a password, to	allow slapd to
	      start without manual intervention, so it is of  critical	impor-
	      tance that the file is protected carefully.

       olcTLSDHParamFile: <filename>
	      This  directive  specifies the file that contains	parameters for
	      Diffie-Hellman ephemeral key exchange.  This is required in  or-
	      der  to  use a DSA certificate on	the server, or an RSA certifi-
	      cate missing the "key encipherment" key usage.  Note  that  set-
	      ting  this  option  may also enable Anonymous Diffie-Hellman key
	      exchanges	in certain non-default cipher suites.	Anonymous  key
	      exchanges	 should	generally be avoided since they	provide	no ac-
	      tual client or server authentication and provide	no  protection
	      against  man-in-the-middle attacks.  You should append "!ADH" to
	      your cipher suites to ensure that	these suites are not used.

       olcTLSECName: <name>
	      Specify the name of the  curve(s)	 to  use  for  Elliptic	 curve
	      Diffie-Hellman ephemeral key exchange.  This option is only used
	      for OpenSSL.  This option	is not used with  GnuTLS;  the	curves
	      may be chosen in the GnuTLS ciphersuite specification.

       olcTLSProtocolMin: <major>[.<minor>]
	      Specifies	 minimum SSL/TLS protocol version that will be negoti-
	      ated.  If	the server doesn't support at least that version,  the
	      SSL handshake will fail.	To require TLS 1.x or higher, set this
	      option to	3.(x+1), e.g.,

		   olcTLSProtocolMin: 3.2

	      would require TLS	1.1.  Specifying a minimum that	is higher than
	      that  supported by the OpenLDAP implementation will result in it
	      requiring	the highest level that it does support.	  This	direc-
	      tive is ignored with GnuTLS.

       olcTLSRandFile: <filename>
	      Specifies	 the file to obtain random bits	from when /dev/[u]ran-
	      dom is  not  available.	Generally  set	to  the	 name  of  the
	      EGD/PRNGD	socket.	 The environment variable RANDFILE can also be
	      used to specify the filename.  This directive  is	 ignored  with
	      GnuTLS.

       olcTLSVerifyClient: <level>
	      Specifies	 what  checks  to perform on client certificates in an
	      incoming TLS session, if any.  The <level> can be	 specified  as
	      one of the following keywords:

	      never  This is the default.  slapd will not ask the client for a
		     certificate.

	      allow  The client	certificate is requested.  If  no  certificate
		     is	 provided,  the	 session  proceeds normally.  If a bad
		     certificate is provided, it will be ignored and the  ses-
		     sion proceeds normally.

	      try    The  client  certificate is requested.  If	no certificate
		     is	provided, the session proceeds	normally.   If	a  bad
		     certificate  is provided, the session is immediately ter-
		     minated.

	      demand | hard | true
		     These keywords are	all equivalent,	for compatibility rea-
		     sons.   The  client certificate is	requested.  If no cer-
		     tificate is provided, or a	bad certificate	 is  provided,
		     the session is immediately	terminated.

		     Note that a valid client certificate is required in order
		     to	use the	SASL EXTERNAL authentication mechanism with  a
		     TLS  session.   As	such, a	non-default olcTLSVerifyClient
		     setting must be chosen to enable SASL EXTERNAL  authenti-
		     cation.

       olcTLSCRLCheck: <level>
	      Specifies	 if  the  Certificate  Revocation List (CRL) of	the CA
	      should be	used to	verify if the  client  certificates  have  not
	      been revoked. This requires olcTLSCACertificatePath parameter to
	      be set. This parameter is	ignored	with GnuTLS.  <level>  can  be
	      specified	as one of the following	keywords:

	      none   No	CRL checks are performed

	      peer   Check the CRL of the peer certificate

	      all    Check the CRL for a whole certificate chain

       olcTLSCRLFile: <filename>
	      Specifies	 a file	containing a Certificate Revocation List to be
	      used for verifying that certificates have	not been revoked. This
	      parameter	is only	valid when using GnuTLS.

DYNAMIC	MODULE OPTIONS
       If  slapd is compiled with --enable-modules then	the module-related en-
       tries will be available.	These entries are named	cn=module{x},cn=config
       and  must  have the olcModuleList objectClass. One entry	should be cre-
       ated per	olcModulePath.	Normally the config engine generates the "{x}"
       index  in  the  RDN  automatically, so it can be	omitted	when initially
       loading these entries.

       olcModuleLoad: <filename> [<arguments>...]
	      Specify the name of a dynamically	loadable module	 to  load  and
	      any  additional  arguments if supported by the module. The file-
	      name may be an absolute path name	or a simple filename.  Non-ab-
	      solute  names  are  searched for in the directories specified by
	      the olcModulePath	option.

       olcModulePath: <pathspec>
	      Specify a	list of	directories to search  for  loadable  modules.
	      Typically	 the  path  is colon-separated but this	depends	on the
	      operating	system.	 The default  is  /usr/local/libexec/openldap,
	      which is where the standard OpenLDAP install will	place its mod-
	      ules.

SCHEMA OPTIONS
       Schema definitions are created as entries  in  the  cn=schema,cn=config
       subtree.	 These	entries	must have the olcSchemaConfig objectClass.  As
       noted above, the	actual cn=schema,cn=config entry is predefined and any
       values specified	for it are ignored.

       olcAttributetypes:     (	<oid>	 [NAME <name>]	  [DESC	<description>]
	      [OBSOLETE]   [SUP	<oid>]	  [EQUALITY <oid>]    [ORDERING	<oid>]
	      [SUBSTR <oid>]   [SYNTAX <oidlen>]  [SINGLE-VALUE]  [COLLECTIVE]
	      [NO-USER-MODIFICATION] [USAGE <attributeUsage>] )
	      Specify an attribute type	using the LDAPv3 syntax	defined	in RFC
	      4512.   The  slapd  parser  extends  the	RFC 4512 definition by
	      allowing string forms as well as numeric OIDs to be used for the
	      attribute	   OID	 and   attribute   syntax   OID.    (See   the
	      olcObjectIdentifier description.)

       olcDitContentRules:    (	<oid>	 [NAME <name>]	  [DESC	<description>]
	      [OBSOLETE]      [AUX <oids>]	[MUST <oids>]	  [MAY <oids>]
	      [NOT <oids>] )
	      Specify an DIT Content Rule using	the LDAPv3 syntax  defined  in
	      RFC  4512.   The slapd parser extends the	RFC 4512 definition by
	      allowing string forms as well as numeric OIDs to be used for the
	      attribute	   OID	 and   attribute   syntax   OID.    (See   the
	      olcObjectIdentifier description.)

       olcLdapSyntaxes	( <oid>	 [DESC <description>]  [X-SUBST	  <substitute-
	      syntax>] )
	      Specify  an  LDAP	 syntax	using the LDAPv3 syntax	defined	in RFC
	      4512.  The slapd parser  extends	the  RFC  4512	definition  by
	      allowing string forms as well as numeric OIDs to be used for the
	      syntax OID.  (See	the objectidentifier description.)  The	 slapd
	      parser  also  honors the X-SUBST extension (an OpenLDAP-specific
	      extension),  which  allows  one  to  use	 the   olcLdapSyntaxes
	      attribute	 to define a non-implemented syntax along with another
	      syntax, the extension value substitute-syntax, as	its  temporary
	      replacement.   The  substitute-syntax  must  be  defined.	  This
	      allows one to define attribute  types  that  make	 use  of  non-
	      implemented  syntaxes  using  the	 correct  syntax  OID.	Unless
	      X-SUBST is used, this configuration statement would result in an
	      error,  since  no	 handlers would	be associated to the resulting
	      syntax structure.

       olcObjectClasses: ( <oid> [NAME <name>] [DESC <description>] [OBSOLETE]
	      [SUP <oids>]   [{	  ABSTRACT   |	 STRUCTURAL   |	 AUXILIARY  }]
	      [MUST <oids>] [MAY <oids>] )
	      Specify an objectclass using the LDAPv3 syntax  defined  in  RFC
	      4512.   The  slapd  parser  extends  the	RFC 4512 definition by
	      allowing string forms as well as numeric OIDs to be used for the
	      object  class  OID.   (See the olcObjectIdentifier description.)
	      Object classes are "STRUCTURAL" by default.

       olcObjectIdentifier: <name> { <oid> | <name>[:<suffix>] }
	      Define a string name that	equates	to the given OID.  The	string
	      can  be  used  in	 place	of  the	numeric	OID in objectclass and
	      attribute	definitions. The name can also be used with  a	suffix
	      of the form ":xx"	in which case the value	"oid.xx" will be used.

GENERAL	BACKEND	OPTIONS
       Options	in  these  entries only	apply to the configuration of a	single
       type of backend.	All backends may support this class  of	 options,  but
       currently    only   back-mdb   does.    The   entry   must   be	 named
       olcBackend=<databasetype>,cn=config and must have the  olcBackendConfig
       objectClass.   <databasetype>  should  be  one  of  asyncmeta,  config,
       dnssrv, ldap, ldif, mdb,	meta,  monitor,	 null,	passwd,	 perl,	relay,
       sock,  sql, or wt.  At present, only back-mdb implements	any options of
       this type, so this entry	should not be used for any other backends.

DATABASE OPTIONS
       Database	     options	  are	   set	    in	    entries	 named
       olcDatabase={x}<databasetype>,cn=config	   and	   must	   have	   the
       olcDatabaseConfig objectClass. Normally the config engine generates the
       "{x}"  index  in	 the  RDN  automatically,  so  it  can be omitted when
       initially loading these entries.

       The special frontend database is	always numbered	"{-1}" and the	config
       database	is always numbered "{0}".

GLOBAL DATABASE	OPTIONS
       Options	in  this section may be	set in the special "frontend" database
       and inherited in	all the	other databases. These options may be  altered
       by  further settings in each specific database. The frontend entry must
       be   named   olcDatabase=frontend,cn=config   and   must	   have	   the
       olcFrontendConfig objectClass.

       olcAccess: to <what> [ by <who> <access>	<control> ]+
	      Grant  access (specified by <access>) to a set of	entries	and/or
	      attributes (specified by	<what>)	 by  one  or  more  requestors
	      (specified  by  <who>).	If no access controls are present, the
	      default policy allows anyone and everyone	to read	 anything  but
	      restricts	 updates  to  rootdn.	(e.g.,	"olcAccess:  to	* by *
	      read").  See slapd.access(5) and the  "OpenLDAP  Administrator's
	      Guide" for details.

	      Access  controls	set in the frontend are	appended to any	access
	      controls set  on	the  specific  databases.   The	 rootdn	 of  a
	      database can always read and write EVERYTHING in that database.

	      Extra special care must be taken with the	access controls	on the
	      config database. Unlike other databases, the default policy  for
	      the  config  database  is	 to  only  allow access	to the rootdn.
	      Regular users should not have  read  access,  and	 write	access
	      should be	granted	very carefully to privileged administrators.

       olcDefaultSearchBase: <dn>
	      Specify  a default search	base to	use when client	submits	a non-
	      base search request with an empty	base DN.  Base	scoped	search
	      requests	with  an empty base DN are not affected.  This setting
	      is only allowed in the frontend entry.

       olcExtraAttrs: <attr>
	      Lists what attributes need  to  be  added	 to  search  requests.
	      Local  storage backends return the entire	entry to the frontend.
	      The  frontend  takes  care  of  only  returning  the   requested
	      attributes  that	are  allowed  by ACLs.	However, features like
	      access checking and so may need specific attributes that are not
	      automatically  returned  by  remote storage backends, like proxy
	      backends and so on.  <attr> is an	attribute that is  needed  for
	      internal	purposes  and  thus always needs to be collected, even
	      when not explicitly requested by	clients.   This	 attribute  is
	      multi-valued.

       olcPasswordHash:	<hash> [<hash>...]
	      This  option  configures	one  or	 more  hashes  to  be  used in
	      generation  of  user  passwords  stored  in   the	  userPassword
	      attribute	 during	 processing  of	 LDAP Password Modify Extended
	      Operations (RFC 3062).  The <hash> must be one of	{SSHA},	{SHA},
	      {SMD5}, {MD5}, {CRYPT}, and {CLEARTEXT}.	The default is {SSHA}.

	      {SHA}  and  {SSHA}  use  the  SHA-1  algorithm (FIPS 160-1), the
	      latter with a seed.

	      {MD5} and	{SMD5} use the MD5 algorithm (RFC  1321),  the	latter
	      with a seed.

	      {CRYPT} uses the crypt(3).

	      {CLEARTEXT}  indicates  that the new password should be added to
	      userPassword as clear text.

	      Note  that  this	option	does  not  alter   the	 normal	  user
	      applications  handling  of userPassword during LDAP Add, Modify,
	      or other LDAP operations.	 This setting is only allowed  in  the
	      frontend entry.

       olcReadOnly: TRUE | FALSE
	      This  option  puts  the  database	 into  "read-only"  mode.  Any
	      attempts to modify the database will  return  an	"unwilling  to
	      perform"	error.	 By  default,  olcReadOnly is FALSE. Note that
	      when this	option is set TRUE on the frontend, it cannot be reset
	      without  restarting  the	server,	 since	further	 writes	to the
	      config database will be rejected.

       olcRequires: <conditions>
	      Specify a	set of conditions  to  require	(default  none).   The
	      directive	  may	be  specified  globally	 and/or	 per-database;
	      databases	  inherit   global   conditions,    so	  per-database
	      specifications are additive.  bind requires bind operation prior
	      to directory operations.	LDAPv3 requires	session	 to  be	 using
	      LDAP   version   3.   authc  requires  authentication  prior  to
	      directory	operations.  SASL requires SASL	 authentication	 prior
	      to  directory operations.	 strong	requires strong	authentication
	      prior  to	 directory  operations.	  The  strong  keyword	allows
	      protected	   "simple"    authentication	 as   well   as	  SASL
	      authentication.  none may	 be  used  to  require	no  conditions
	      (useful to clear out globally set	conditions within a particular
	      database); it must occur first in	the list of conditions.

       olcRestrict: <oplist>
	      Specify a	list of	operations that	are restricted.	  Restrictions
	      on   a   specific	  database   override  any  frontend  setting.
	      Operations  can  be  any	of   add,   bind,   compare,   delete,
	      extended[=<OID>],	modify,	rename,	search,	or the special pseudo-
	      operations read and write, which respectively summarize read and
	      write  operations.   The	use of restrict	write is equivalent to
	      olcReadOnly: TRUE	(see above).  The extended keyword allows  one
	      to indicate the OID of the specific operation to be restricted.

       olcSchemaDN: <dn>
	      Specify  the  distinguished name for the subschema subentry that
	      controls	the  entries  on  this	 server.    The	  default   is
	      "cn=Subschema".

       olcSecurity: <factors>
	      Specify  a  set of security strength factors (separated by white
	      space) to	require	(see olcSaslSecprops's	minssf	option	for  a
	      description of security strength factors).  The directive	may be
	      specified	globally and/or	per-database.  ssf=<n>	specifies  the
	      overall  security	 strength factor.  transport=<n> specifies the
	      transport	security strength factor.  tls=<n> specifies  the  TLS
	      security	strength factor.  sasl=<n> specifies the SASL security
	      strength factor.	update_ssf=<n> specifies the overall  security
	      strength	  factor    to	  require   for	  directory   updates.
	      update_transport=<n> specifies the transport  security  strength
	      factor   to   require  for  directory  updates.	update_tls=<n>
	      specifies	the  TLS  security  strength  factor  to  require  for
	      directory	 updates.  update_sasl=<n> specifies the SASL security
	      strength	 factor	  to   require	  for	 directory    updates.
	      simple_bind=<n>  specifies the security strength factor required
	      for simple  username/password  authentication.   Note  that  the
	      transport	  factor  is  measure  of  security  provided  by  the
	      underlying transport, e.g. ldapi:// (and eventually IPSEC).   It
	      is not normally used.

       olcSizeLimit: {<integer>|unlimited}

       olcSizeLimit: size[.{soft|hard}]=<integer> [...]
	      Specify  the  maximum  number of entries to return from a	search
	      operation.  The default size limit is  500.   Use	 unlimited  to
	      specify  no  limits.   The  second  format  allows  a fine grain
	      setting of the  size  limits.   If  no  special  qualifiers  are
	      specified, both soft and hard limits are set.  Extra args	can be
	      added in the same	value.	Additional qualifiers  are  available;
	      see olcLimits for	an explanation of all of the different flags.

       olcSortVals: <attr> [...]
	      Specify  a  list	of  multi-valued  attributes whose values will
	      always be	maintained in sorted order.  Using  this  option  will
	      allow   Modify,	Compare,   and	filter	evaluations  on	 these
	      attributes to be performed more efficiently. The resulting  sort
	      order  depends  on the attributes' syntax	and matching rules and
	      may not correspond to lexical order or  any  other  recognizable
	      order.  This setting is only allowed in the frontend entry.

       olcTimeLimit: {<integer>|unlimited}

       olcTimeLimit: time[.{soft|hard}]=<integer> [...]
	      Specify  the maximum number of seconds (in real time) slapd will
	      spend answering a	search request.	 The  default  time  limit  is
	      3600.   Use  unlimited  to specify no limits.  The second	format
	      allows a fine grain setting of the time limits.  Extra args  can
	      be  added	in the same value. See olcLimits for an	explanation of
	      the different flags.

GENERAL	DATABASE OPTIONS
       Options in this section only apply to the specific database  for	 which
       they  are defined.  They	are supported by every type of backend.	All of
       the Global Database Options may also be used here.

       olcAddContentAcl: TRUE |	FALSE
	      Controls whether Add operations will perform ACL checks  on  the
	      content  of the entry being added. This check is off by default.
	      See the slapd.access(5) manual page  for	more  details  on  ACL
	      requirements for Add operations.

       olcHidden: TRUE | FALSE
	      Controls	whether	the database will be used to answer queries. A
	      database that is hidden will never be  selected  to  answer  any
	      queries,	and  any  suffix  configured  on  the database will be
	      ignored  in  checks  for	conflicts  with	 other	databases.  By
	      default, olcHidden is FALSE.

       olcLastMod: TRUE	| FALSE
	      Controls	 whether   slapd   will	  automatically	 maintain  the
	      modifiersName,	  modifyTimestamp,	creatorsName,	   and
	      createTimestamp  attributes  for	entries.  It also controls the
	      entryCSN and entryUUID  attributes,  which  are  needed  by  the
	      syncrepl provider. By default, olcLastMod	is TRUE.

       olcLastBind: TRUE | FALSE
	      Controls	 whether   slapd   will	  automatically	 maintain  the
	      pwdLastSuccess attribute for entries. By default,	olcLastBind is
	      FALSE.

       olcLastBindPrecision: <integer>
	      If    olcLastBind	  is   enabled,	  specifies   how   frequently
	      pwdLastSuccess will be updated. More than	integer	 seconds  must
	      have  passed  since  the	last  successful bind. In a replicated
	      environment with frequent	bind activity it may be	useful to  set
	      this to a	large value.

       olcLimits: <selector> <limit> [<limit> [...]]
	      Specify  time and	size limits based on the operation's initiator
	      or base DN.  The argument	<selector> can be any of

		     anonymous	  |    users	|    [<dnspec>=]<pattern>    |
		     group[/oc[/at]]=<pattern>

	      with

		     <dnspec> ::= dn[.<type>][.<style>]

		     <type>  ::= self |	this

		     <style>  ::= exact	| base | onelevel | subtree | children
		     | regex | anonymous

	      DN type self is the default and means the	bound user, while this
	      means  the base DN of the	operation.  The	term anonymous matches
	      all  unauthenticated  clients.   The  term  users	 matches   all
	      authenticated  clients; otherwise	an exact dn pattern is assumed
	      unless otherwise specified  by  qualifying  the  (optional)  key
	      string dn	with exact or base (which are synonyms), to require an
	      exact match; with	onelevel, to  require  exactly	one  level  of
	      depth  match;  with  subtree, to allow any level of depth	match,
	      including	the exact match; with children,	to allow any level  of
	      depth  match,  not  including  the exact match; regex explicitly
	      requires the  (default)  match  based  on	 POSIX	(''extended'')
	      regular  expression pattern.  Finally, anonymous matches unbound
	      operations; the pattern field is ignored.	 The same behavior  is
	      obtained	by  using the anonymous	form of	the <selector> clause.
	      The  term	 group,	 with  the   optional	objectClass   oc   and
	      attributeType  at	 fields,  followed by pattern, sets the	limits
	      for any DN listed	in the values of  the  at  attribute  (default
	      member) of the oc	group objectClass (default groupOfNames) whose
	      DN exactly matches pattern.

	      The currently supported limits are size and time.

	      The syntax  for  time  limits  is	 time[.{soft|hard}]=<integer>,
	      where  integer  is  the  number  of  seconds  slapd  will	 spend
	      answering	a search request.  If  no  time	 limit	is  explicitly
	      requested	 by  the  client,  the	soft  limit  is	 used;	if the
	      requested	time limit exceeds the hard limit, the	value  of  the
	      limit  is	used instead.  If the hard limit is set	to the keyword
	      soft, the	soft limit is used in either case; if it is set	to the
	      keyword unlimited, no hard limit is enforced.  Explicit requests
	      for time limits smaller or equal to the hard limit are  honored.
	      If  no limit specifier is	set, the value is assigned to the soft
	      limit, and the hard limit	 is  set  to  soft,  to	 preserve  the
	      original behavior.

	      The	 syntax	       for	  size	      limits	    is
	      size[.{soft|hard|unchecked}]=<integer>,  where  integer  is  the
	      maximum  number  of entries slapd	will return answering a	search
	      request.	If no  size  limit  is	explicitly  requested  by  the
	      client,  the  soft  limit	 is  used; if the requested size limit
	      exceeds the hard limit, the value	of the limit is	used  instead.
	      If  the hard limit is set	to the keyword soft, the soft limit is
	      used in either case; if it is set	to the keyword	unlimited,  no
	      hard  limit  is  enforced.   Explicit  requests  for size	limits
	      smaller or equal to the hard limit are honored.	The  unchecked
	      specifier	 sets  a  limit	 on  the number	of candidates a	search
	      request is allowed to examine.  The rationale behind it is  that
	      searches for non-properly	indexed	attributes may result in large
	      sets of candidates,  which  must	be  examined  by  slapd(8)  to
	      determine	 whether  they	match  the  search filter or not.  The
	      unchecked	limit provides a means to drop such operations	before
	      they  are	 even  started.	 If the	selected candidates exceed the
	      unchecked	 limit,	 the  search  will  abort  with	 Unwilling  to
	      perform.	 If  it	 is  set to the	keyword	unlimited, no limit is
	      applied (the default).  If it is set to disabled,	the search  is
	      not  even	performed; this	can be used to disallow	searches for a
	      specific set of users.  If no limit specifier is set, the	 value
	      is  assigned  to	the  soft  limit, and the hard limit is	set to
	      soft, to preserve	the original behavior.

	      In case of no match, the global limits are  used.	  The  default
	      values  are  the	same  as for olcSizeLimit and olcTimeLimit; no
	      limit is set on unchecked.

	      If pagedResults control is requested, the	 hard  size  limit  is
	      used  by default,	because	the request of a specific page size is
	      considered an explicit request for a limitation on the number of
	      entries  to be returned.	However, the size limit	applies	to the
	      total count of entries returned within the search, and not to  a
	      single page.  Additional size limits may be enforced; the	syntax
	      is size.pr={<integer>|noEstimate|unlimited},  where  integer  is
	      the  max	page  size  if	no  explicit limit is set; the keyword
	      noEstimate inhibits the server from returning an estimate	of the
	      total  number  of	 entries  that	might  be  returned (note: the
	      current implementation  does  not	 return	 any  estimate).   The
	      keyword  unlimited  indicates  that  no  limit is	applied	to the
	      pagedResults     control	   page	    size.      The	syntax
	      size.prtotal={<integer>|hard|unlimited|disabled}	allows	one to
	      set a limit on the total number of entries that the pagedResults
	      control  will  return.   By  default it is set to	the hard limit
	      which will use the size.hard value.  When	set,  integer  is  the
	      max  number  of  entries that the	whole search with pagedResults
	      control can return.  Use unlimited to allow unlimited number  of
	      entries	to   be	 returned,  e.g.  to  allow  the  use  of  the
	      pagedResults control as a	means to circumvent  size  limitations
	      on  regular searches; the	keyword	disabled disables the control,
	      i.e. no paged results can	be  returned.	Note  that  the	 total
	      number  of  entries  returned  when  the pagedResults control is
	      requested	cannot exceed the hard size limit of regular  searches
	      unless extended by the prtotal switch.

	      The  olcLimits  statement	 is typically used to let an unlimited
	      number of	entries	be returned by	searches  performed  with  the
	      identity	used  by  the consumer for synchronization purposes by
	      means of the RFC 4533 LDAP Content Synchronization protocol (see
	      olcSyncrepl for details).

	      When using subordinate databases,	it is necessary	for any	limits
	      that are to be applied across the	parent and its subordinates to
	      be  defined  in  both the	parent and its subordinates. Otherwise
	      the settings on the subordinate databases	are not	honored.

       olcMaxDerefDepth: <depth>
	      Specifies	the maximum number  of	aliases	 to  dereference  when
	      trying  to resolve an entry, used	to avoid infinite alias	loops.
	      The default is 15.

       olcMultiProvider: TRUE |	FALSE
	      This option puts a consumer database into	 Multi-Provider	 mode.
	      Update  operations  will be accepted from	any user, not just the
	      updatedn.	 The database must already be configured as a syncrepl
	      consumer before this keyword may be set. This mode also requires
	      a	olcServerID (see above)	to be configured.   By	default,  this
	      setting is FALSE.

       olcMonitoring: TRUE | FALSE
	      This  option  enables  database-specific monitoring in the entry
	      related to the current database in the "cn=Databases,cn=Monitor"
	      subtree  of  the	monitor	 database,  if the monitor database is
	      enabled.	Currently, only	the MDB	 database  provides  database-
	      specific	monitoring.  If	monitoring is supported	by the backend
	      it defaults to TRUE, otherwise FALSE.

       olcPlugin: <plugin_type>	<lib_path> <init_function> [<arguments>]
	      Configure	a SLAPI	plugin.	See the	 slapd.plugin(5)  manpage  for
	      more details.

       olcRootDN: <dn>
	      Specify  the  distinguished  name	 that is not subject to	access
	      control or administrative	limit restrictions for	operations  on
	      this  database.	This  DN  may or may not be associated with an
	      entry.  An empty root DN (the default) specifies no root	access
	      is  to  be  granted.   It	is recommended that the	rootdn only be
	      specified	when needed  (such  as	when  initially	 populating  a
	      database).   If the rootdn is within a namingContext (suffix) of
	      the database, a simple bind password may also be provided	 using
	      the  olcRootPW  directive.  Many	optional  features,  including
	      syncrepl,	require	the rootdn to be  defined  for	the  database.
	      The  olcRootDN  of  the cn=config	database defaults to cn=config
	      itself.

       olcRootPW: <password>
	      Specify a	password (or hash of the  password)  for  the  rootdn.
	      The  password  can  only	be  set	 if  the  rootdn is within the
	      namingContext (suffix) of	the database.  This option accepts all
	      RFC   2307   userPassword	 formats  known	 to  the  server  (see
	      olcPasswordHash	description)	as    well    as    cleartext.
	      slappasswd(8)  may  be  used  to	generate a hash	of a password.
	      Cleartext	and {CRYPT} passwords are not recommended.   If	 empty
	      (the  default),  authentication of the root DN is	by other means
	      (e.g. SASL).  Use	of SASL	is encouraged.

       olcSubordinate: [TRUE | FALSE | advertise]
	      Specify that the current backend database	is  a  subordinate  of
	      another  backend database. A subordinate	database may have only
	      one suffix. This option may be used to glue  multiple  databases
	      into  a  single  namingContext.	If  the	 suffix	of the current
	      database is within the namingContext  of	a  superior  database,
	      searches against the superior database will be propagated	to the
	      subordinate as well. All of  the	databases  associated  with  a
	      single namingContext should have identical rootdns.  Behavior of
	      other  LDAP  operations  is  unaffected  by  this	 setting.   In
	      particular,  it  is  not	possible to use	moddn to move an entry
	      from  one	 subordinate  to  another   subordinate	  within   the
	      namingContext.

	      If  the  optional	advertise flag is supplied, the	naming context
	      of this database is advertised in	the root DSE. The  default  is
	      to hide this database context, so	that only the superior context
	      is visible.

	      If the slap  tools  slapcat(8),  slapadd(8),  slapmodify(8),  or
	      slapindex(8)  are	 used  on  the	superior  database,  any glued
	      subordinates that	support	these tools are	opened as well.

	      Databases	that are glued together	should usually	be  configured
	      with the same indices (assuming they support indexing), even for
	      attributes that only  exist  in  some  of	 these	databases.  In
	      general,	all  of	 the  glued  databases should be configured as
	      similarly	as possible,  since  the  intent  is  to  provide  the
	      appearance of a single directory.

	      Note   that   the	  subordinate	functionality  is  implemented
	      internally by the	glue overlay and as  such  its	behavior  will
	      interact	with  other  overlays  in  use.	 By  default, the glue
	      overlay is automatically configured as the last overlay  on  the
	      superior	 database.   Its  position  on	the  database  can  be
	      explicitly configured by setting an overlay  glue	 directive  at
	      the  desired  position. This explicit configuration is necessary
	      e.g.  when using the syncprov overlay,  which  needs  to	follow
	      glue in order to work over all of	the glued databases. E.g.
		   dn: olcDatabase={1}mdb,cn=config
		   olcSuffix: dc=example,dc=com
		   ...

		   dn: olcOverlay={0}glue,olcDatabase={1}mdb,cn=config
		   ...

		   dn: olcOverlay={1}syncprov,olcDatabase={1}mdb,cn=config
		   ...
       See the Overlays	section	below for more details.

       olcSuffix: <dn suffix>
	      Specify  the  DN	suffix	of queries that	will be	passed to this
	      backend database.	 Multiple suffix lines can  be	given  and  at
	      least one	is required for	each database definition.

	      If  the  suffix of one database is "inside" that of another, the
	      database	with  the  inner  suffix  must	come  first   in   the
	      configuration  file.   You  may also want	to glue	such databases
	      together with the	olcSubordinate attribute.

       olcSyncUseSubentry: TRUE	| FALSE
	      Store the	syncrepl contextCSN  in	 a  subentry  instead  of  the
	      context  entry  of  the  database.  The  subentry's  RDN will be
	      "cn=ldapsync". The default is FALSE, meaning the	contextCSN  is
	      stored in	the context entry.

       olcSyncrepl:   rid=<replica   ID>  provider=ldap[s]://<hostname>[:port]
	      searchbase=<base	  DN>	  [type=refreshOnly|refreshAndPersist]
	      [interval=dd:hh:mm:ss]	[retry=[<retry	  interval>    <#   of
	      retries>]+]  [filter=<filter  str>]  [scope=sub|one|base|subord]
	      [attrs=<attr    list>]	[exattrs=<attr	  list>]   [attrsonly]
	      [sizelimit=<limit>] [timelimit=<limit>]  [schemachecking=on|off]
	      [network-timeout=<seconds>]		   [timeout=<seconds>]
	      [tcp-user-timeout=<milliseconds>]	      [bindmethod=simple|sasl]
	      [binddn=<dn>]	  [saslmech=<mech>]	  [authcid=<identity>]
	      [authzid=<identity>]   [credentials=<passwd>]    [realm=<realm>]
	      [secprops=<properties>]	[keepalive=<idle>:<probes>:<interval>]
	      [starttls=yes|critical]	 [tls_cert=<file>]    [tls_key=<file>]
	      [tls_cacert=<file>]			[tls_cacertdir=<path>]
	      [tls_reqcert=never|allow|try|demand]
	      [tls_reqsan=never|allow|try|demand] [tls_cipher_suite=<ciphers>]
	      [tls_ecname=<names>]		  [tls_crlcheck=none|peer|all]
	      [tls_protocol_min=<major>[.<minor>]]  [suffixmassage=<real  DN>]
	      [logbase=<base	   DN>]	       [logfilter=<filter	 str>]
	      [syncdata=default|accesslog|changelog] [lazycommit]
	      Specify  the current database as a consumer which	is kept	up-to-
	      date with	the  provider  content	by  establishing  the  current
	      slapd(8)	as  a  replication  consumer  site  running a syncrepl
	      replication engine.  The consumer	content	is  kept  synchronized
	      to  the  provider	content	using the LDAP Content Synchronization
	      protocol.	Refer to  the  "OpenLDAP  Administrator's  Guide"  for
	      detailed	information on setting up a replicated slapd directory
	      service using the	syncrepl replication engine.

	      rid  identifies  the  current  syncrepl  directive  within   the
	      replication  consumer  site.   It	 is a non-negative integer not
	      greater than 999 (limited	to three decimal digits).

	      provider specifies the replication provider site containing  the
	      provider	content	 as  an	 LDAP URI. If <port> is	not given, the
	      standard LDAP port number	(389 or	636) is	used.

	      The content of the syncrepl consumer is defined using  a	search
	      specification  as	 its  result set. The consumer slapd will send
	      search requests to the provider slapd according  to  the	search
	      specification.  The  search  specification  includes searchbase,
	      scope,  filter,  attrs,  attrsonly,  sizelimit,  and   timelimit
	      parameters  as  in  the normal search specification. The exattrs
	      option may also be used to specify  attributes  that  should  be
	      omitted  from  incoming entries.	The scope defaults to sub, the
	      filter defaults to (objectclass=*),  and	there  is  no  default
	      searchbase.  The attrs list defaults to "*,+" to return all user
	      and operational attributes, and attrsonly	and exattrs are	 unset
	      by default.  The sizelimit and timelimit only accept "unlimited"
	      and positive integers, and both  default	to  "unlimited".   The
	      sizelimit	 and  timelimit	parameters define a consumer requested
	      limitation on the	number of entries that can be returned by  the
	      LDAP  Content Synchronization operation; as such,	it is intended
	      to implement partial  replication	 based	on  the	 size  of  the
	      replicated   database   and   on	 the   time  required  by  the
	      synchronization.	Note, however, that any	 provider-side	limits
	      for  the	replication  identity will be enforced by the provider
	      regardless  of  the  limits  requested  by  the	LDAP   Content
	      Synchronization  operation,  much	 like  for  any	 other	search
	      operation.

	      The LDAP Content	Synchronization	 protocol  has	two  operation
	      types.   In  the refreshOnly operation, the next synchronization
	      search operation is periodically rescheduled at an interval time
	      (specified  by  interval parameter; 1 day	by default) after each
	      synchronization operation	finishes.   In	the  refreshAndPersist
	      operation,  a  synchronization  search remains persistent	in the
	      provider slapd.  Further updates to the provider	will  generate
	      searchResultEntry	 to the	consumer slapd as the search responses
	      to the persistent	synchronization	search.	If the initial	search
	      fails due	to an error, the next synchronization search operation
	      is periodically rescheduled at an	interval  time	(specified  by
	      interval parameter; 1 day	by default)

	      If an error occurs during	replication, the consumer will attempt
	      to reconnect according to	the retry parameter which is a list of
	      the  <retry  interval>  and  <# of retries> pairs.  For example,
	      retry="60	10 300 3" lets the consumer retry every	60 seconds for
	      the first	10 times and then retry	every 300 seconds for the next
	      3	times before stop retrying. The	`+' in <#  of  retries>	 means
	      indefinite  number  of  retries  until  success.	If no retry is
	      specified, by default syncrepl retries every hour	forever.

	      The schema checking can be enforced at the  LDAP	Sync  consumer
	      site  by turning on the schemachecking parameter.	The default is
	      off.  Schema checking on means that replicated entries must have
	      a	 structural objectClass, must obey to objectClass requirements
	      in  terms	 of  required/allowed  attributes,  and	 that	naming
	      attributes  and  distinguished  values  must  be	present.  As a
	      consequence,  schema  checking  should  be  off	when   partial
	      replication is used.

	      The  network-timeout  parameter  sets how	long the consumer will
	      wait to establish	a network connection to	the provider.  Once  a
	      connection  is established, the timeout parameter	determines how
	      long the consumer	will wait for  the  initial  Bind  request  to
	      complete.	  The	defaults   for	 these	parameters  come  from
	      ldap.conf(5).   The  tcp-user-timeout  parameter,	 if  non-zero,
	      corresponds   to	 the   TCP_USER_TIMEOUT	  set  on  the	target
	      connections, overriding the operating system setting.  Only some
	      systems  support	the  customization  of	this  parameter, it is
	      ignored otherwise	and system-wide	settings are used.

	      A	 bindmethod  of	 simple	 requires  the	options	  binddn   and
	      credentials  and	should	only  be  used	when adequate security
	      services (e.g. TLS or IPSEC) are	in  place.   REMEMBER:	simple
	      bind  credentials	 must  be  in cleartext!  A bindmethod of sasl
	      requires the option saslmech.  Depending on  the	mechanism,  an
	      authentication  identity	and/or	credentials  can  be specified
	      using authcid and	credentials.  The  authzid  parameter  may  be
	      used  to	specify	 an authorization identity.  Specific security
	      properties (as with the sasl-secprops keyword above) for a  SASL
	      bind  can	 be  set  with the secprops option. A non default SASL
	      realm can	be set with the	realm option.  The identity  used  for
	      synchronization  by the consumer should be allowed to receive an
	      unlimited	number of entries in response  to  a  search  request.
	      The provider, other than allowing	authentication of the syncrepl
	      identity,	 should	 grant	that   identity	  appropriate	access
	      privileges   to  the  data  that	is  being  replicated  (access
	      directive), and appropriate time and size	limits.	 This  can  be
	      accomplished   by	  either   allowing  unlimited	sizelimit  and
	      timelimit, or by setting an appropriate limits statement in  the
	      consumer's configuration (see sizelimit and limits for details).

	      The  keepalive  parameter	 sets  the values of idle, probes, and
	      interval used to check whether a socket is alive;	 idle  is  the
	      number  of  seconds a connection needs to	remain idle before TCP
	      starts sending keepalive probes; probes is the maximum number of
	      keepalive	probes TCP should send before dropping the connection;
	      interval is interval in  seconds	between	 individual  keepalive
	      probes.	Only  some  systems support the	customization of these
	      values;  the  keepalive  parameter  is  ignored  otherwise,  and
	      system-wide settings are used.

	      The  starttls  parameter	specifies use of the StartTLS extended
	      operation	to establish a	TLS  session  before  Binding  to  the
	      provider.	If the critical	argument is supplied, the session will
	      be aborted if the	StartTLS request fails.	Otherwise the syncrepl
	      session  continues without TLS. The tls_reqcert setting defaults
	      to "demand", the tls_reqsan setting defaults to "allow", and the
	      other  TLS  settings  default  to	the same as the	main slapd TLS
	      settings.

	      The suffixmassage	parameter allows the consumer to pull  entries
	      from  a  remote directory	whose DN suffix	differs	from the local
	      directory. The portion of	the remote entries' DNs	 that  matches
	      the searchbase will be replaced with the suffixmassage DN.

	      Rather  than  replicating	 whole entries,	the consumer can query
	      logs of data modifications. This mode of operation  is  referred
	      to  as  delta syncrepl. In addition to the above parameters, the
	      logbase and logfilter parameters must be set  appropriately  for
	      the log that will	be used. The syncdata parameter	must be	set to
	      either "accesslog" if the	log conforms to	the slapo-accesslog(5)
	      log  format,  or "changelog" if the log conforms to the obsolete
	      changelog	format.	If the syncdata	parameter is omitted or	set to
	      "default"	then the log parameters	are ignored.

	      The  lazycommit  parameter tells the underlying database that it
	      can store	changes	without	performing a  full  flush  after  each
	      change.  This  may  improve  performance for the consumer, while
	      sacrificing safety or durability.

       olcUpdateDN: <dn>
	      This option is  only  applicable	in  a  replica	database.   It
	      specifies	  the  DN  permitted  to  update  (subject  to	access
	      controls)	the replica.  It is only needed	in  certain  push-mode
	      replication  scenarios.	Generally,  this  DN should not	be the
	      same as the rootdn used at the provider.

       olcUpdateRef: <url>
	      Specify the referral to pass back	 when  slapd(8)	 is  asked  to
	      modify  a	 replicated  local  database.	If multiple values are
	      specified, each url is provided.

DATABASE-SPECIFIC OPTIONS
       Each database  may  allow  specific  configuration  options;  they  are
       documented   separately	 in   the  backends'  manual  pages.  See  the
       slapd.backends(5) manual	page for an overview of	available backends.

OVERLAYS
       An overlay is a piece of	code that intercepts  database	operations  in
       order  to  extend or change them. Overlays are pushed onto a stack over
       the database, and so they will execute in the reverse of	the  order  in
       which they were configured and the database itself will receive control
       last of all.

       Overlays	must be	configured as child entries of	a  specific  database.
       The entry's RDN must be of the form olcOverlay={x}<overlaytype> and the
       entry must have the olcOverlayConfig objectClass. Normally  the	config
       engine generates	the "{x}" index	in the RDN automatically, so it	can be
       omitted when initially loading these entries.

       See the slapd.overlays(5) manual	page  for  an  overview	 of  available
       overlays.

EXAMPLES
       Here  is	 a  short  example of a	configuration in LDIF suitable for use
       with slapadd(8) :

	      dn: cn=config
	      objectClass: olcGlobal
	      cn: config
	      olcPidFile: /var/db/run/slapd.pid
	      olcAttributeOptions: x-hidden lang-

	      dn: cn=schema,cn=config
	      objectClass: olcSchemaConfig
	      cn: schema

	      include: file:///usr/local/etc/openldap/schema/core.ldif

	      dn: olcDatabase=frontend,cn=config
	      objectClass: olcDatabaseConfig
	      objectClass: olcFrontendConfig
	      olcDatabase: frontend
	      #	Subtypes of "name" (e.g. "cn" and "ou")	with the
	      #	option ";x-hidden" can be searched for/compared,
	      #	but are	not shown.  See	slapd.access(5).
	      olcAccess: to attrs=name;x-hidden	by * =cs
	      #	Protect	passwords.  See	slapd.access(5).
	      olcAccess: to attrs=userPassword	by * auth
	      #	Read access to other attributes	and entries.
	      olcAccess: to * by * read

	      #	set a rootpw for the config database so	we can bind.
	      #	deny access to everyone	else.
	      dn: olcDatabase=config,cn=config
	      objectClass: olcDatabaseConfig
	      olcDatabase: config
	      olcRootPW: {SSHA}XKYnrjvGT3wZFQrDD5040US592LxsdLy
	      olcAccess: to * by * none

	      dn: olcDatabase=mdb,cn=config
	      objectClass: olcDatabaseConfig
	      objectClass: olcMdbConfig
	      olcDatabase: mdb
	      olcSuffix: "dc=our-domain,dc=com"
	      #	The database directory MUST exist prior	to
	      #	running	slapd AND should only be accessible
	      #	by the slapd/tools. Mode 0700 recommended.
	      olcDbDirectory: /var/db/openldap-data
	      #	Indices	to maintain
	      olcDbIndex:     objectClass  eq
	      olcDbIndex:     cn,sn,mail   pres,eq,approx,sub

	      #	We serve small clients that do not handle referrals,
	      #	so handle remote lookups on their behalf.
	      dn: olcDatabase=ldap,cn=config
	      objectClass: olcDatabaseConfig
	      objectClass: olcLdapConfig
	      olcDatabase: ldap
	      olcSuffix: ""
	      olcDbUri:	ldap://ldap.some-server.com/

       Assuming	the above data was saved in a file named "config.ldif" and the
       /usr/local/etc/openldap/slapd.d	 directory   has  been	created,  this
       command will initialize the configuration:
	      slapadd -F /usr/local/etc/openldap/slapd.d -n 0 -l config.ldif

       "OpenLDAP Administrator's Guide"	contains a longer annotated example of
       a slapd configuration.

       Alternatively,  an existing slapd.conf file can be converted to the new
       format using slapd or any of the	slap tools:
	      slaptest -f /usr/local/etc/openldap/slapd.conf -F	/usr/local/etc/openldap/slapd.d

FILES
       /usr/local/etc/openldap/slapd.conf
	      default slapd configuration file

       /usr/local/etc/openldap/slapd.d
	      default slapd configuration directory

SEE ALSO
       ldap(3),	ldif(5),  gnutls-cli(1),  slapd.access(5),  slapd.backends(5),
       slapd.conf(5),	  slapd.overlays(5),	 slapd.plugin(5),    slapd(8),
       slapacl(8),    slapadd(8),    slapauth(8),    slapcat(8),    slapdn(8),
       slapindex(8), slapmodify(8), slappasswd(8), slaptest(8).

       "OpenLDAP Administrator's Guide"	(http://www.OpenLDAP.org/doc/admin/)

ACKNOWLEDGEMENTS
       OpenLDAP	 Software  is developed	and maintained by The OpenLDAP Project
       <http://www.openldap.org/>.  OpenLDAP  Software	is  derived  from  the
       University of Michigan LDAP 3.3 Release.

OpenLDAP 2.6.1			  2022/01/20		       SLAPD-CONFIG(5)

NAME | SYNOPSIS | DESCRIPTION | GLOBAL CONFIGURATION OPTIONS | TLS OPTIONS | DYNAMIC MODULE OPTIONS | SCHEMA OPTIONS | GENERAL BACKEND OPTIONS | DATABASE OPTIONS | GLOBAL DATABASE OPTIONS | GENERAL DATABASE OPTIONS | DATABASE-SPECIFIC OPTIONS | OVERLAYS | EXAMPLES | FILES | SEE ALSO | ACKNOWLEDGEMENTS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=slapd-config&sektion=5&manpath=FreeBSD+13.1-RELEASE+and+Ports>

home | help