3.5. Introducing sysinstall(8)

The FreeBSD 8.X installer, sysinstall(8), is console based and is divided into a number of menus and screens that can be used to configure and control the installation process.

This menu system is controlled by the arrow keys, Enter, Tab, Space, and other keys. To view a detailed description of these keys and what they do, ensure that the Usage entry is highlighted and that the [Select] button is selected, as shown in Figure 3.5, “Selecting Usage from Sysinstall Main Menu”, then press Enter.

The instructions for using the menu system will be displayed. After reviewing them, press Enter to return to the Main Menu.

Figure 3.5. Selecting Usage from Sysinstall Main Menu
Selecting Usage from Sysinstall Main Menu

3.5.1. Selecting the Documentation Menu

From the Main Menu, select Doc with the arrow keys and press Enter.

Figure 3.6. Selecting Documentation Menu
Selecting Documentation Menu

This will display the Documentation Menu.

Figure 3.7. Sysinstall Documentation Menu
Sysinstall Documentation Menu

It is important to read the documents provided. To view a document, select it with the arrow keys and press Enter. When finished reading a document, press Enter to return to the Documentation Menu.

To return to the Main Installation Menu, select Exit with the arrow keys and press Enter.

3.5.2. Selecting the Keymap Menu

To change the keyboard mapping, use the arrow keys to select Keymap from the menu and press Enter. This is only required when using a non-standard or non-US keyboard.

Figure 3.8. Sysinstall Main Menu
Sysinstall Main Menu

A different keyboard mapping may be chosen by selecting the menu item using the up and down arrow keys and pressing Space. Pressing Space again will unselect the item. When finished, choose the [ OK ] using the arrow keys and press Enter.

Only a partial list is shown in this screen representation. Selecting [ Cancel ] by pressing Tab will use the default keymap and return to the Main Install Menu.

Figure 3.9. Sysinstall Keymap Menu
Sysinstall Keymap Menu

3.5.3. Installation Options Screen

Select Options and press Enter.

Figure 3.10. Sysinstall Main Menu
Sysinstall Main Menu

Figure 3.11. Sysinstall Options
Sysinstall Options

The default values are usually fine for most users and do not need to be changed. The release name will vary according to the version being installed.

The description of the selected item will appear at the bottom of the screen highlighted in blue. Notice that one of the options is Use Defaults to reset all values to startup defaults.

Press F1 to read the help screen about the various options.

Press Q to return to the Main Install menu.

3.5.4. Begin a Standard Installation

The Standard installation is the option recommended for those new to UNIX® or FreeBSD. Use the arrow keys to select Standard and then press Enter to start the installation.

Figure 3.12. Begin Standard Installation
Begin Standard Installation

All FreeBSD documents are available for download at http://ftp.FreeBSD.org/pub/FreeBSD/doc/

Questions that are not answered by the documentation may be sent to <freebsd-questions@FreeBSD.org>.
Send questions about this document to <freebsd-doc@FreeBSD.org>.