3.9. Committing to the Installation

3.9. Committing to the Installation
Prev	Chapter 3. Installing FreeBSD 8.`X`	Next

The installation can now proceed if desired. This is also the last chance for aborting the installation to prevent changes to the hard drive.

User Confirmation Requested Last Chance! Are you SURE you want to continue the installation? If you're running this on a disk with data you wish to save then WE STRONGLY ENCOURAGE YOU TO MAKE PROPER BACKUPS before proceeding! We can take no responsibility for lost disk contents! [ Yes ] No

Select [ Yes ] and press Enter to proceed.

The installation time will vary according to the distribution chosen, installation media, and the speed of the computer. There will be a series of messages displayed, indicating the status.

The installation is complete when the following message is displayed:

Message Congratulations! You now have FreeBSD installed on your system. We will now move on to the final configuration questions. For any option you do not wish to configure, simply select No. If you wish to re-enter this utility after the system is up, you may do so by typing: /usr/sbin/sysinstall. [ OK ] [ Press enter or space ]

Press Enter to proceed with post-installation configurations.

Selecting [ No ] and pressing Enter will abort the installation so no changes will be made to the system. The following message will appear:

Message Installation complete with some errors. You may wish to scroll through the debugging messages on VTY1 with the scroll-lock feature. You can also choose "No" at the next prompt and go back into the installation menus to retry whichever operations have failed. [ OK ]

This message is generated because nothing was installed. Pressing Enter will return to the Main Installation Menu to exit the installation.

Prev	Up	Next
3.8. Choosing the Installation Media	Home	3.10. Post-installation