Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
XDM(1)									XDM(1)

NAME
       xdm - X Display Manager with support for	XDMCP, host chooser

SYNOPSIS
       xdm [ -config configuration_file	] [ -nodaemon ]	[ -debug debug_level ]
       [ -error	error_log_file	]  [  -resources  resource_file	 ]  [  -server
       server_entry ] [	-session session_program ]

DESCRIPTION
       Xdm  manages a collection of X displays,	which may be on	the local host
       or remote servers.  The design of xdm was guided	by the needs of	X ter-
       minals  as well as The Open Group standard XDMCP, the X Display Manager
       Control Protocol.  Xdm provides services	similar	to those  provided  by
       init,  getty and	login on character terminals: prompting	for login name
       and password, authenticating the	user, and running a ``session.''

       A ``session'' is	defined	by the lifetime	of a  particular  process;  in
       the  traditional	character-based	terminal world,	it is the user's login
       shell.  In the xdm context, it is an arbitrary session  manager.	  This
       is  because  in	a  windowing environment, a user's login shell process
       does not	necessarily have any terminal-like  interface  with  which  to
       connect.	  When	a real session manager is not available, a window man-
       ager or terminal	emulator is typically used as the ``session manager,''
       meaning that termination	of this	process	terminates the user's session.

       When the	session	is terminated, xdm resets the X	 server	 and  (option-
       ally) restarts the whole	process.

       When  xdm  receives  an	Indirect query via XDMCP, it can run a chooser
       process to perform an XDMCP BroadcastQuery (or an XDMCP Query to	speci-
       fied hosts) on behalf of	the display and	offer a	menu of	possible hosts
       that offer XDMCP	display	management.  This feature  is  useful  with  X
       terminals that do not offer a host menu themselves.

       Xdm  can	 be configured to ignore BroadcastQuery	messages from selected
       hosts.  This is useful when you don't want the host to appear in	 menus
       produced	by chooser or X	terminals themselves.

       Because	xdm  provides  the  first interface that users will see, it is
       designed	to be simple to	use and	easy to	customize to the  needs	 of  a
       particular  site.   Xdm has many	options, most of which have reasonable
       defaults.  Browse through the various sections of this manual,  picking
       and  choosing  the things you want to change.  Pay particular attention
       to the Session Program section, which will describe how to set  up  the
       style of	session	desired.

OVERVIEW
       xdm  is highly configurable, and	most of	its behavior can be controlled
       by resource files and shell scripts.  The names of  these  files	 them-
       selves are resources read from the file xdm-config or the file named by
       the -config option.

       xdm offers display management two different  ways.   It	can  manage  X
       servers	running	on the local machine and specified in Xservers,	and it
       can manage remote X servers (typically X	terminals)  using  XDMCP  (the
       XDM Control Protocol) as	specified in the Xaccess file.

       The  resources  of the X	clients	run by xdm outside the user's session,
       including xdm's own login window, can be	affected by setting  resources
       in the Xresources file.

       For  X  terminals that do not offer a menu of hosts to get display man-
       agement from, xdm can collect willing hosts and run the chooser program
       to offer	the user a menu.  For X	displays attached to a host, this step
       is typically not	used, as the local host	does the display management.

       After resetting the X server, xdm runs the Xsetup script	to  assist  in
       setting up the screen the user sees along with the xlogin widget.

       The  xlogin  widget,  which xdm presents, offers	the familiar login and
       password	prompts.

       After the user logs in, xdm runs	the Xstartup script as root.

       Then xdm	runs the Xsession script as the	 user.	 This  system  session
       file  may  do  some additional startup and typically runs the .xsession
       script in the user's home directory.  When the Xsession	script	exits,
       the session is over.

       At  the end of the session, the Xreset script is	run to clean up, the X
       server is reset,	and the	cycle starts over.

       The file	 /usr/X11R6/lib/X11/xdm/xdm-errors will	contain	error messages
       from xdm	and anything output to stderr by Xsetup, Xstartup, Xsession or
       Xreset.	When you have trouble getting xdm working, check this file  to
       see if xdm has any clues	to the trouble.

OPTIONS
       All  of	these  options,	except -config itself, specify values that can
       also be specified in the	configuration file as resources.

       -config configuration_file
	      Names the	configuration file, which specifies resources to  con-
	      trol  the	behavior of xdm.  /usr/X11R6/lib/X11/xdm/xdm-config is
	      the default.  See	the section Configuration File.

       -nodaemon
	      Specifies	``false'' as the value for the	DisplayManager.daemon-
	      Mode  resource.	This  suppresses  the  normal daemon behavior,
	      which is for xdm to close	 all  file  descriptors,  disassociate
	      itself  from  the	 controlling  terminal,	 and put itself	in the
	      background when it first starts up.

       -debug debug_level
	      Specifies	the numeric value  for	the  DisplayManager.debugLevel
	      resource.	  A  non-zero value causes xdm to print	lots of	debug-
	      ging statements to the terminal; it also disables	 the  Display-
	      Manager.daemonMode  resource,  forcing xdm to run	synchronously.
	      To interpret these debugging messages, a copy of the source code
	      for  xdm	is  almost  a  necessity.  No attempt has been made to
	      rationalize or standardize the output.

       -error error_log_file
	      Specifies	 the   value   for   the   DisplayManager.errorLogFile
	      resource.	  This	file  contains errors from xdm as well as any-
	      thing written to stderr by the various scripts and programs  run
	      during the progress of the session.

       -resources resource_file
	      Specifies	 the  value for	the DisplayManager*resources resource.
	      This file	is loaded using	xrdb to	specify	configuration  parame-
	      ters for the authentication widget.

       -server server_entry
	      Specifies	 the  value  for  the DisplayManager.servers resource.
	      See the section Local Server Specification for a description  of
	      this resource.

       -udpPort	port_number
	      Specifies	the value for the DisplayManager.requestPort resource.
	      This sets	the port-number	 which	xdm  will  monitor  for	 XDMCP
	      requests.	 As XDMCP uses the registered well-known UDP port 177,
	      this resource should not be changed except for debugging.	If set
	      to 0 xdm will not	listen for XDMCP or Chooser requests.

       -session	session_program
	      Specifies	 the  value  for  the DisplayManager*session resource.
	      This indicates the program to run	as the session after the  user
	      has logged in.

       -xrm resource_specification
	      Allows an	arbitrary resource to be specified, as in most X Tool-
	      kit applications.

RESOURCES
       At many stages the actions of xdm can be	controlled through the use  of
       its  configuration  file,  which	 is  in	 the  X	resource format.  Some
       resources modify	the behavior of	xdm on all displays, while others mod-
       ify  its	 behavior on a single display.	Where actions relate to	a spe-
       cific display, the display name is  inserted  into  the	resource  name
       between ``DisplayManager'' and the final	resource name segment.

       For  local  displays,  the resource name	and class are as read from the
       Xservers	file.

       For remote displays, the	resource name is what the network  address  of
       the display resolves to.	 See the removeDomain resource.	 The name must
       match exactly; xdm is not aware of all the network aliases  that	 might
       reach a given display.  If the name resolve fails, the address is used.
       The resource class is as	sent  by  the  display	in  the	 XDMCP	Manage
       request.

       Because	the  resource  manager uses colons to separate the name	of the
       resource	from its value and dots	to separate resource name  parts,  xdm
       substitutes  underscores	 for  both dots	and colons when	generating the
       resource	name.  For example, DisplayManager.expo_x_org_0.startup	is the
       name  of	 the  resource	which  defines	the startup shell file for the
       ``expo.x.org:0''	display.

       DisplayManager.servers
	      This resource either  specifies  a  file	name  full  of	server
	      entries,	one  per line (if the value starts with	a slash), or a
	      single server entry.  See	the section Local Server Specification
	      for the details.

       DisplayManager.requestPort
	      This  indicates the UDP port number which	xdm uses to listen for
	      incoming XDMCP requests.	Unless you need	to debug  the  system,
	      leave this with its default value	of 177.

       DisplayManager.errorLogFile
	      Error output is normally directed	at the system console.	To re-
	      direct it, set this resource to a	file name.  A method  to  send
	      these  messages  to syslog should	be developed for systems which
	      support it; however, the wide variety  of	 interfaces  precludes
	      any  system-independent implementation.  This file also contains
	      any output directed to stderr by the Xsetup, Xstartup,  Xsession
	      and Xreset files,	so it will contain descriptions	of problems in
	      those scripts as well.

       DisplayManager.debugLevel
	      If the integer value of this  resource  is  greater  than	 zero,
	      reams  of	 debugging  information	will be	printed.  It also dis-
	      ables daemon mode, which would redirect the information into the
	      bit-bucket,  and	allows	non-root users to run xdm, which would
	      normally not be useful.

       DisplayManager.daemonMode
	      Normally,	xdm attempts to	make  itself  into  a  daemon  process
	      unassociated with	any terminal.  This is accomplished by forking
	      and leaving the  parent  process	to  exit,  then	 closing  file
	      descriptors  and	releasing  the	controlling terminal.  In some
	      environments this	is not desired	(in  particular,  when	debug-
	      ging).   Setting	this  resource	to ``false'' will disable this
	      feature.

       DisplayManager.pidFile
	      The filename specified will be created to	contain	an ASCII  rep-
	      resentation of the process-id of the main	xdm process.  Xdm also
	      uses file	locking	on this	file to	attempt	to eliminate  multiple
	      daemons  running	on the same machine, which would cause quite a
	      bit of havoc.

       DisplayManager.lockPidFile
	      This is the resource which controls whether xdm uses file	 lock-
	      ing  to  keep  multiple  display managers	from running amok.  On
	      System V,	this uses the lockf library call, while	on BSD it uses
	      flock.

       DisplayManager.authDir
	      This  names  a  directory	 under	which xdm stores authorization
	      files while initializing the  session.   The  default  value  is
	      /usr/X11R6/lib/X11/xdm.  Can be overridden for specific displays
	      by DisplayManager.DISPLAY.authFile.

       DisplayManager.autoRescan
	      This boolean controls whether  xdm  rescans  the	configuration,
	      servers,	access	control	 and authentication keys files after a
	      session terminates and the files have changed.  By default it is
	      ``true.''	  You can force	xdm to reread these files by sending a
	      SIGHUP to	the main process.

       DisplayManager.removeDomainname
	      When computing the display name  for  XDMCP  clients,  the  name
	      resolver	will  typically	create a fully qualified host name for
	      the terminal.  As	this is	sometimes confusing, xdm  will	remove
	      the  domain  name	 portion of the	host name if it	is the same as
	      the domain name of the local host	when this variable is set.  By
	      default the value	is ``true.''

       DisplayManager.keyFile
	      XDM-AUTHENTICATION-1  style XDMCP	authentication requires	that a
	      private key be  shared  between  xdm  and	 the  terminal.	  This
	      resource specifies the file containing those values.  Each entry
	      in the file consists of a	display	name and the shared  key.   By
	      default,	xdm does not include support for XDM-AUTHENTICATION-1,
	      as it requires DES which is not generally	distributable  because
	      of United	States export restrictions.

       DisplayManager.accessFile
	      To prevent unauthorized XDMCP service and	to allow forwarding of
	      XDMCP IndirectQuery requests, this file contains a  database  of
	      hostnames	 which	are  either  allowed  direct  access  to  this
	      machine, or have a list of hosts to which	queries	should be for-
	      warded  to.  The format of this file is described	in the section
	      XDMCP Access Control.

       DisplayManager.exportList
	      A	list of	additional environment variables, separated  by	 white
	      space,  to pass on to the	Xsetup,	Xstartup, Xsession, and	Xreset
	      programs.

       DisplayManager.randomFile
	      A	file to	checksum to generate the seed of  authorization	 keys.
	      This  should  be a file that changes frequently.	The default is
	      /dev/mem.

       DisplayManager.prngdSocket

       DisplayManager.prngPort
	      A	UNIX domain socket name	or a TCP socket	port number  on	 local
	      host  on which a Pseudo-Random Number Generator Daemon, like EGD
	      (http://egd.sourceforge.net) is listening, in order to  generate
	      the  autorization	keys. Either a non null	port or	a valid	socket
	      name must	be specified. The default is to	 use  the  Unix-domain
	      socket /tmp/entropy.

       On systems that don't have such a daemon, a fall-back entropy gathering
       system, based on	various	log file contents hashed by the	MD5  algorithm
       is used instead.

       DisplayManager.greeterLib
	      On  systems that support a dynamically-loadable greeter library,
	      the name of the library.	The default is
	       /usr/X11R6/lib/X11/xdm/libXdmGreet.so.

       DisplayManager.choiceTimeout
	      Number of	seconds	to wait	for display to respond after user  has
	      selected a host from the chooser.	 If the	display	sends an XDMCP
	      IndirectQuery within this	time, the request is forwarded to  the
	      chosen  host.  Otherwise,	it is assumed to be from a new session
	      and the chooser is offered again.	 Default is 15.

       DisplayManager.sourceAddress
	      Use the numeric IP address of the	incoming connection on	multi-
	      homed hosts instead of the host name. This is to avoid trying to
	      connect on the wrong interface which might be down at this time.

       DisplayManager.willing
	      This specifies a program which is	run (as) root when an an XDMCP
	      BroadcastQuery is	received and this host is configured to	 offer
	      XDMCP display management.	The output of this program may be dis-
	      played on	a chooser window.  If no  program  is  specified,  the
	      string Willing to	manage is sent.

       DisplayManager.DISPLAY.resources
	      This  resource  specifies	 the  name of the file to be loaded by
	      xrdb as the resource database onto the root window of  screen  0
	      of  the  display.	  The  Xsetup  program,	 the Login widget, and
	      chooser will use the resources set in this file.	This  resource
	      data  base is loaded just	before the authentication procedure is
	      started, so it can control the appearance	of the	login  window.
	      See the section Authentication Widget, which describes the vari-
	      ous resources that are appropriate to place in this file.	 There
	      is no default value for this resource, but
	       /usr/X11R6/lib/X11/xdm/Xresources is the	conventional name.

       DisplayManager.DISPLAY.chooser
	      Specifies	 the  program  run  to	offer a	host menu for Indirect
	      queries redirected to the	special	host name CHOOSER.
	       /usr/X11R6/lib/X11/xdm/chooser  is the default.	See  the  sec-
	      tions XDMCP Access Control and Chooser.

       DisplayManager.DISPLAY.xrdb
	      Specifies	 the  program used to load the resources.  By default,
	      xdm uses	/usr/X11R6/bin/xrdb.

       DisplayManager.DISPLAY.cpp
	      This specifies the name of the C preprocessor which is  used  by
	      xrdb.

       DisplayManager.DISPLAY.setup
	      This  specifies a	program	which is run (as root) before offering
	      the Login	window.	 This may be used to change the	appearance  of
	      the  screen  around  the Login window or to put up other windows
	      (e.g., you may want to run xconsole here).  By default, no  pro-
	      gram  is	run.   The  conventional  name for a file used here is
	      Xsetup.  See the section Setup Program.

       DisplayManager.DISPLAY.startup
	      This specifies a program	which  is  run	(as  root)  after  the
	      authentication process succeeds.	By default, no program is run.
	      The conventional name for	a file used here is Xstartup.  See the
	      section Startup Program.

       DisplayManager.DISPLAY.session
	      This specifies the session to be executed	(not running as	root).
	      By default,  /usr/X11R6/bin/xterm	is run.	 The conventional name
	      is Xsession.  See	the section Session Program.

       DisplayManager.DISPLAY.reset
	      This  specifies  a program which is run (as root)	after the ses-
	      sion terminates.	By default, no program is  run.	  The  conven-
	      tional name is Xreset.  See the section Reset Program.

       DisplayManager.DISPLAY.openDelay

       DisplayManager.DISPLAY.openRepeat

       DisplayManager.DISPLAY.openTimeout

       DisplayManager.DISPLAY.startAttempts
	      These  numeric  resources	 control  the  behavior	 of  xdm  when
	      attempting to  open  intransigent	 servers.   openDelay  is  the
	      length  of  the  pause (in seconds) between successive attempts,
	      openRepeat is the	number of attempts to make, openTimeout	is the
	      amount of	time to	wait while actually attempting the open	(i.e.,
	      the maximum time spent in	the connect(2) system call) and	 star-
	      tAttempts	 is  the  number  of times this	entire process is done
	      before giving up on the server.  After openRepeat	attempts  have
	      been  made,  or  if openTimeout seconds elapse in	any particular
	      attempt, xdm terminates and restarts the server,	attempting  to
	      connect again.  This process is repeated startAttempts times, at
	      which point the display is declared dead and disabled.  Although
	      this behavior may	seem arbitrary,	it has been empirically	devel-
	      oped and works quite well	on most	systems.  The  default	values
	      are  5 for openDelay, 5 for openRepeat, 30 for openTimeout and 4
	      for startAttempts.

       DisplayManager.DISPLAY.pingInterval

       DisplayManager.DISPLAY.pingTimeout
	      To discover when remote  displays	 disappear,  xdm  occasionally
	      pings them, using	an X connection	and XSync calls.  pingInterval
	      specifies	the time (in minutes) between each ping	attempt, ping-
	      Timeout  specifies  the  maximum	amount of time (in minutes) to
	      wait for the terminal to respond to the request.	If the	termi-
	      nal  does	 not  respond, the session is declared dead and	termi-
	      nated.  By default, both are set to  5  minutes.	 If  you  fre-
	      quently  use X terminals which can become	isolated from the man-
	      aging host, you may wish to increase this	value.	The only worry
	      is  that	sessions will continue to exist	after the terminal has
	      been accidentally	disabled.  xdm will not	ping  local  displays.
	      Although it would	seem harmless, it is unpleasant	when the work-
	      station session is terminated as a result	of the server  hanging
	      for NFS service and not responding to the	ping.

       DisplayManager.DISPLAY.terminateServer
	      This  boolean  resource specifies	whether	the X server should be
	      terminated when a	session	terminates (instead of resetting  it).
	      This  option  can	 be used when the server tends to grow without
	      bound over time, in order	to limit the amount of time the	server
	      is run.  The default value is ``false.''

       DisplayManager.DISPLAY.userPath
	      Xdm  sets	 the PATH environment variable for the session to this
	      value.  It should	be a colon separated list of directories;  see
	      sh(1)	     for	  a	     full	  description.
	      ``:/bin:/usr/bin:/usr/X11R6/bin:/usr/ucb'' is a common  setting.
	      The default value	can be specified at build time in the X	system
	      configuration file with DefaultUserPath.

       DisplayManager.DISPLAY.systemPath
	      Xdm sets the PATH	environment variable for the startup and reset
	      scripts  to  the	value  of this resource.  The default for this
	      resource is specified at build  time  by	the  DefaultSystemPath
	      entry	 in	 the	  system      configuration	 file;
	      ``/etc:/bin:/usr/bin:/usr/X11R6/bin:/usr/ucb''   is   a	common
	      choice.	Note  the absence of ``.'' from	this entry.  This is a
	      good practice to follow for root;	it avoids many	common	Trojan
	      Horse system penetration schemes.

       DisplayManager.DISPLAY.systemShell
	      Xdm  sets	 the  SHELL  environment  variable for the startup and
	      reset scripts to the value of this resource.  It is  /bin/sh  by
	      default.

       DisplayManager.DISPLAY.failsafeClient
	      If  the  default session fails to	execute, xdm will fall back to
	      this program.  This program is executed with no  arguments,  but
	      executes	using  the  same  environment variables	as the session
	      would have had (see the section Session Program).	  By  default,
	      /usr/X11R6/bin/xterm is used.

       DisplayManager.DISPLAY.grabServer

       DisplayManager.DISPLAY.grabTimeout
	      To  improve  security,  xdm  grabs the server and	keyboard while
	      reading the login	name and password.   The  grabServer  resource
	      specifies	 if  the server	should be held for the duration	of the
	      name/password reading.  When ``false,'' the server is  ungrabbed
	      after  the  keyboard  grab  succeeds,  otherwise	the  server is
	      grabbed until just before	the session begins.   The  default  is
	      ``false.''   The grabTimeout resource specifies the maximum time
	      xdm will wait for	the grab to succeed.  The  grab	 may  fail  if
	      some  other  client  has	the server grabbed, or possibly	if the
	      network latencies	are very high.	This resource  has  a  default
	      value of 3 seconds; you should be	cautious when raising it, as a
	      user can be spoofed by a look-alike window on the	 display.   If
	      the  grab	fails, xdm kills and restarts the server (if possible)
	      and the session.

       DisplayManager.DISPLAY.authorize

       DisplayManager.DISPLAY.authName
	      authorize	is a boolean resource which controls whether xdm  gen-
	      erates  and uses authorization for the local server connections.
	      If authorization is used,	authName is a  list  of	 authorization
	      mechanisms  to use, separated by white space.  XDMCP connections
	      dynamically specify  which  authorization	 mechanisms  are  sup-
	      ported,  so authName is ignored in this case.  When authorize is
	      set for a	display	and authorization is not available,  the  user
	      is informed by having a different	message	displayed in the login
	      widget.  By default, authorize is	``true.''  authName is	``MIT-
	      MAGIC-COOKIE-1,''	  or,  if  XDM-AUTHORIZATION-1	is  available,
	      ``XDM-AUTHORIZATION-1 MIT-MAGIC-COOKIE-1.''

       DisplayManager.DISPLAY.authFile
	      This file	is used	to communicate the authorization data from xdm
	      to  the  server, using the -auth server command line option.  It
	      should be	kept in	a directory which is not world-writable	as  it
	      could  easily  be	removed, disabling the authorization mechanism
	      in the server.  If not specified,	a name is generated from  Dis-
	      playManager.authDir and the name of the display.

       DisplayManager.DISPLAY.authComplain
	      If set to	``false,'' disables the	use of the unsecureGreeting in
	      the login	window.	 See the section Authentication	 Widget.   The
	      default is ``true.''

       DisplayManager.DISPLAY.resetSignal
	      The number of the	signal xdm sends to reset the server.  See the
	      section Controlling the Server.  The default is 1	(SIGHUP).

       DisplayManager.DISPLAY.termSignal
	      The number of the	signal xdm sends to terminate the server.  See
	      the   section   Controlling  the	Server.	  The  default	is  15
	      (SIGTERM).

       DisplayManager.DISPLAY.resetForAuth
	      The original  implementation  of	authorization  in  the	sample
	      server  reread  the  authorization  file	at  server reset time,
	      instead of when checking the initial connection.	As xdm	gener-
	      ates the authorization information just before connecting	to the
	      display, an old server would not	get  up-to-date	 authorization
	      information.   This  resource  causes  xdm to send SIGHUP	to the
	      server after setting up the file,	causing	an  additional	server
	      reset to occur, during which time	the new	authorization informa-
	      tion will	be read.  The default is ``false,''  which  will  work
	      for all MIT servers.

       DisplayManager.DISPLAY.userAuthDir
	      When xdm is unable to write to the usual user authorization file
	      ($HOME/.Xauthority), it creates  a  unique  file	name  in  this
	      directory	 and points the	environment variable XAUTHORITY	at the
	      created file.  It	uses /tmp by default.

CONFIGURATION FILE
       First, the xdm configuration file should	be set up.  Make  a  directory
       (usually	 /usr/X11R6/lib/X11/xdm) to contain all	of the relevant	files.

       Here is a reasonable configuration file,	which could be named  xdm-con-
       fig:

	    DisplayManager.servers:	       /usr/X11R6/lib/X11/xdm/Xservers
	    DisplayManager.errorLogFile:       /usr/X11R6/lib/X11/xdm/xdm-errors
	    DisplayManager*resources:	       /usr/X11R6/lib/X11/xdm/Xresources
	    DisplayManager*startup:	       /usr/X11R6/lib/X11/xdm/Xstartup
	    DisplayManager*session:	       /usr/X11R6/lib/X11/xdm/Xsession
	    DisplayManager.pidFile:	       /usr/X11R6/lib/X11/xdm/xdm-pid
	    DisplayManager._0.authorize:       true
	    DisplayManager*authorize:	       false

       Note  that  this	 file mostly contains references to other files.  Note
       also that some of the resources are specified with ``*''	separating the
       components.  These resources can	be made	unique for each	different dis-
       play, by	replacing the ``*'' with the display-name, but	normally  this
       is  not	very useful.  See the Resources	section	for a complete discus-
       sion.

XDMCP ACCESS CONTROL
       The database file specified by the  DisplayManager.accessFile  provides
       information  which  xdm uses to control access from displays requesting
       XDMCP service.  This file contains three	 types	of  entries:   entries
       which  control  the  response  to Direct	and Broadcast queries, entries
       which control the response to Indirect queries, and macro  definitions.

       The  format  of	the  Direct entries is simple, either a	host name or a
       pattern,	which is distinguished from a host name	by  the	 inclusion  of
       one  or	more  meta  characters	(`*' matches any sequence of 0 or more
       characters, and `?' matches any single character)  which	 are  compared
       against	the  host  name	of the display device.	If the entry is	a host
       name, all comparisons are done using network  addresses,	 so  any  name
       which  converts	to  the	correct	network	address	may be used.  For pat-
       terns, only canonical host names	are used in the	comparison, so	ensure
       that you	do not attempt to match	aliases.  Preceding either a host name
       or a pattern with a `!' character causes	hosts which match  that	 entry
       to be excluded.

       To only respond to Direct queries for a host or pattern,	it can be fol-
       lowed by	the optional ``NOBROADCAST'' keyword.  This  can  be  used  to
       prevent	an  xdm	 server	 from  appearing  on  menus based on Broadcast
       queries.

       An Indirect entry also contains a host name or pattern, but follows  it
       with a list of host names or macros to which indirect queries should be
       sent.

       A macro definition contains a macro name	and a list of host  names  and
       other  macros  that  the	 macro expands to.  To distinguish macros from
       hostnames, macro	names start with  a  `%'  character.   Macros  may  be
       nested.

       Indirect	 entries  may  also specify to have xdm	run chooser to offer a
       menu of hosts to	connect	to.  See the section Chooser.

       When checking access for	a  particular  display	host,  each  entry  is
       scanned	in  turn and the first matching	entry determines the response.
       Direct and Broadcast entries are	ignored	when scanning for an  Indirect
       entry and vice-versa.

       Blank  lines are	ignored, `#' is	treated	as a comment delimiter causing
       the rest	of that	line to	be ignored, and	`\newline' causes the  newline
       to be ignored, allowing indirect	host lists to span multiple lines.

       Here is an example Xaccess file:

       #
       # Xaccess - XDMCP access	control	file
       #

       #
       # Direct/Broadcast query	entries
       #

       !xtra.lcs.mit.edu   # disallow direct/broadcast service for xtra
       bambi.ogi.edu	   # allow access from this particular display
       *.lcs.mit.edu	   # allow access from any display in LCS

       *.deshaw.com	   NOBROADCAST	       # allow only direct access
       *.gw.com				       # allow direct and broadcast

       #
       # Indirect query	entries
       #

       %HOSTS		   expo.lcs.mit.edu xenon.lcs.mit.edu \
			   excess.lcs.mit.edu kanga.lcs.mit.edu

       extract.lcs.mit.edu xenon.lcs.mit.edu   #force extract to contact xenon
       !xtra.lcs.mit.edu   dummy	       #disallow indirect access
       *.lcs.mit.edu	   %HOSTS	       #all others get to choose

       If  compiled  with  IPv6	 support, multicast address groups may also be
       included	in the list of addresses indirect queries are set to.	Multi-
       cast  addresses	may  be	 followed  by  an optional / character and hop
       count. If no hop	count is specified, the	multicast hop  count  defaults
       to  1,  keeping the packet on the local network.	For IPv4 multicasting,
       the hop count is	used as	the TTL.

       Examples:

       rincewind.sample.net ff02::1		    #IPv6 Multicast to ff02::1
						    #with a hop	count of 1
       ponder.sample.net    CHOOSER 239.192.1.1/16  #Offer a menu of hosts
						    #who respond to IPv4 Multicast
						    # to 239.192.1.1 with a TTL	of 16

CHOOSER
       For X terminals that do not offer a host	menu for use with Broadcast or
       Indirect	 queries,  the	chooser	 program can do	this for them.	In the
       Xaccess file, specify ``CHOOSER'' as the	first entry  in	 the  Indirect
       host  list.  Chooser will send a	Query request to each of the remaining
       host names in the list and offer	a menu of all the hosts	that  respond.

       The  list  may consist of the word ``BROADCAST,'' in which case chooser
       will send a Broadcast instead, again offering a menu of all hosts  that
       respond.	  Note	that  on some operating	systems, UDP packets cannot be
       broadcast, so this feature will not work.

       Example Xaccess file using chooser:

       extract.lcs.mit.edu  CHOOSER %HOSTS	    #offer a menu of these hosts
       xtra.lcs.mit.edu	    CHOOSER BROADCAST	    #offer a menu of all hosts

       The program to use for chooser is specified by the  DisplayManager.DIS-
       PLAY.chooser  resource.	For more flexibility at	this step, the chooser
       could be	a shell	script.	 Chooser is the	session	manager	 here;	it  is
       run instead of a	child xdm to manage the	display.

       Resources  for  this program can	be put into the	file named by Display-
       Manager.DISPLAY.resources.

       When the	user selects a host, chooser prints the	host chosen, which  is
       read  by	the parent xdm,	and exits.  xdm	closes its connection to the X
       server, and the server resets and sends another Indirect	XDMCP request.
       xdm  remembers the user's choice	(for DisplayManager.choiceTimeout sec-
       onds) and forwards the request to the chosen host, which	starts a  ses-
       sion on that display.

LISTEN
       The  following  configuration directive is also defined for the Xaccess
       configuration file:

       LISTEN interface	[list of multicast group addresses]
	      interface	may be a hostname or IP	addresss representing  a  net-
	      work  interface  on this machine,	or the wildcard	* to represent
	      all available network interfaces.

       If one or more LISTEN lines are specified, xdm only listens  for	 XDMCP
       connections  on	the specified interfaces. If multicast group addresses
       are listed on a listen line, xdm	joins  the  multicast  groups  on  the
       given interface.

       If no LISTEN lines are given, the original behavior of listening	on all
       interfaces is preserved for backwards compatibility.  Additionally,  if
       no  LISTEN  is  specified,  xdm	joins the default XDMCP	IPv6 multicast
       group, when compiled with IPv6 support.

       To disable listening for	XDMCP connections altogther, a line of	LISTEN
       with  no	addresses may be specified, or the previously supported	method
       of setting DisplayManager.requestPort to	0 may be used.

       Examples:
       LISTEN *	ff02::1	   # Listen on all interfaces and to the
			   # ff02::1 IPv6 multicast group.
       LISTEN 10.11.12.13  # Listen only on this interface, as long
			   # as	no other listen	directives appear in
			   # file.

IPv6 MULTICAST ADDRESS SPECIFICATION
       The   Internet	Assigned   Numbers   Authority	 has   has    assigned
       ff0X:0:0:0:0:0:0:12b  as	 the  permanently  assigned range of multicast
       addresses for XDMCP. The	X in the prefix	may be replaced	by  any	 valid
       scope  identifier,  such	 as  1 for Node-Local, 2 for Link-Local, 5 for
       Site-Local, and so on.  (See IETF RFC 2373 or its replacement for  fur-
       ther  details and scope definitions.)  xdm defaults to listening	on the
       Link-Local scope	address	ff02:0:0:0:0:0:0:12b to	most closely match the
       old IPv4	subnet broadcast behavior.

LOCAL SERVER SPECIFICATION
       The resource DisplayManager.servers gives a server specification	or, if
       the values starts with a	slash (/),  the	 name  of  a  file  containing
       server specifications, one per line.

       Each  specification indicates a display which should constantly be man-
       aged and	which is not using XDMCP.  This	method is used	typically  for
       local  servers only.  If	the resource or	the file named by the resource
       is empty, xdm will offer	XDMCP service only.

       Each specification consists of at least three parts:  a display name, a
       display	class,	a display type,	and (for local servers)	a command line
       to start	the server.  A typical entry for local display number 0	 would
       be:

	 :0 Digital-QV local /usr/X11R6/bin/X :0

       The display types are:

       local	 local display:	xdm must run the server
       foreign	 remote	display: xdm opens an X	connection to a	running	server

       The  display  name must be something that can be	passed in the -display
       option to an X program.	This string is used to generate	 the  display-
       specific	 resource  names,  so be careful to match the names (e.g., use
       ``:0 Sun-CG3 local /usr/X11R6/bin/X :0''	instead	of ``localhost:0  Sun-
       CG3  local  /usr/X11R6/bin/X :0'' if your other resources are specified
       as ``DisplayManager._0.session'').  The display class portion  is  also
       used  in	 the display-specific resources, as the	class of the resource.
       This is useful if you have a large collection of	similar	displays (such
       as  a corral of X terminals) and	would like to set resources for	groups
       of them.	 When using XDMCP, the display is required to specify the dis-
       play  class,  so	the manual for your particular X terminal should docu-
       ment the	display	class string for your device.  If it doesn't, you  can
       run  xdm	in debug mode and look at the resource strings which it	gener-
       ates for	that device, which will	include	the class string.

       When xdm	starts a session,  it  sets  up	 authorization	data  for  the
       server.	 For  local  servers,  xdm  passes  ``-auth  filename''	on the
       server's	command	line to	point it at its	authorization data.  For XDMCP
       servers,	xdm passes the authorization data to the server	via the	Accept
       XDMCP request.

RESOURCES FILE
       The Xresources file is loaded onto the display as a  resource  database
       using  xrdb.   As  the authentication widget reads this database	before
       starting	up, it usually contains	parameters for that widget:

	    xlogin*login.translations: #override\
		 Ctrl<Key>R: abort-display()\n\
		 <Key>F1: set-session-argument(failsafe) finish-field()\n\
		 <Key>Return: set-session-argument() finish-field()
	    xlogin*borderWidth:	3
	    xlogin*greeting: CLIENTHOST
	    #ifdef COLOR
	    xlogin*greetColor: CadetBlue
	    xlogin*failColor: red
	    #endif

       Please note the translations entry; it specifies	a few new translations
       for  the	 widget	 which	allow users to escape from the default session
       (and avoid troubles that	may occur in it).  Note	that if	 #override  is
       not specified, the default translations are removed and replaced	by the
       new value, not a	very useful result as some of the default translations
       are  quite  useful (such	as ``<Key>: insert-char	()'' which responds to
       normal typing).

       This file may also contain resources for	the setup program and chooser.

SETUP PROGRAM
       The  Xsetup file	is run after the server	is reset, but before the Login
       window is offered.  The file is typically a shell script.  It is	run as
       root, so	should be careful about	security.  This	is the place to	change
       the root	background or bring up other windows that should appear	on the
       screen along with the Login widget.

       In  addition to any specified by	DisplayManager.exportList, the follow-
       ing environment variables are passed:

	    DISPLAY	   the associated display name
	    PATH	   the value of	DisplayManager.DISPLAY.systemPath
	    SHELL	   the value of	DisplayManager.DISPLAY.systemShell
	    XAUTHORITY	   may be set to an authority file

       Note that since xdm grabs the keyboard, any other windows will  not  be
       able to receive keyboard	input.	They will be able to interact with the
       mouse, however; beware of potential security holes here.	  If  Display-
       Manager.DISPLAY.grabServer  is  set, Xsetup will	not be able to connect
       to the display at all.  Resources for this program can be put into  the
       file named by DisplayManager.DISPLAY.resources.

       Here is a sample	Xsetup script:

	    #!/bin/sh
	    # Xsetup_0 - setup script for one workstation
	    xcmsdb < /usr/X11R6/lib/monitors/alex.0
	    xconsole -geometry 480x130-0-0 -notify -verbose -exitOnFail	&

AUTHENTICATION WIDGET
       The authentication widget reads a name/password pair from the keyboard.
       Nearly every imaginable parameter can be	controlled  with  a  resource.
       Resources for this widget should	be put into the	file named by Display-
       Manager.DISPLAY.resources.  All of these	have reasonable	 default  val-
       ues, so it is not necessary to specify any of them.

       xlogin.Login.width, xlogin.Login.height,	xlogin.Login.x,	xlogin.Login.y
	      The  geometry of the Login widget	is normally computed automati-
	      cally.  If you wish to position it elsewhere,  specify  each  of
	      these resources.

       xlogin.Login.foreground
	      The color	used to	display	the typed-in user name.

       xlogin.Login.font
	      The font used to display the typed-in user name.

       xlogin.Login.greeting
	      A	 string	which identifies this window.  The default is ``X Win-
	      dow System.''

       xlogin.Login.unsecureGreeting
	      When X authorization is requested	in the configuration file  for
	      this  display  and  none	is  in use, this greeting replaces the
	      standard greeting.  The default is ``This	is  an	unsecure  ses-
	      sion''

       xlogin.Login.greetFont
	      The font used to display the greeting.

       xlogin.Login.greetColor
	      The color	used to	display	the greeting.

       xlogin.Login.namePrompt
	      The  string  displayed  to  prompt for a user name.  Xrdb	strips
	      trailing white space from	resource values, so to add  spaces  at
	      the end of the prompt (usually a nice thing), add	spaces escaped
	      with backslashes.	 The default is	``Login:  ''

       xlogin.Login.passwdPrompt
	      The string displayed to prompt for a password.  The  default  is
	      ``Password:  ''

       xlogin.Login.promptFont
	      The font used to display both prompts.

       xlogin.Login.promptColor
	      The color	used to	display	both prompts.

       xlogin.Login.fail
	      A	message	which is displayed when	the authentication fails.  The
	      default is ``Login incorrect''

       xlogin.Login.failFont
	      The font used to display the failure message.

       xlogin.Login.failColor
	      The color	used to	display	the failure message.

       xlogin.Login.failTimeout
	      The number of seconds that the  failure  message	is  displayed.
	      The default is 30.

       xlogin.Login.allowRootLogin
	      If  set  to ``false'', don't allow root (and any other user with
	      uid = 0) to log in directly.  The	default	is ``true''.

       xlogin.Login.allowNullPasswd
	      If set to	``true'', allow	an otherwise failing password match to
	      succeed  if the account does not require a password at all.  The
	      default is ``false'', so only users that have passwords assigned
	      can log in.

       xlogin.Login.translations
	      This  specifies  the  translations  used	for  the login widget.
	      Refer to the X Toolkit documentation for a  complete  discussion
	      on translations.	The default translation	table is:

		   Ctrl<Key>H:	  delete-previous-character() \n\
		   Ctrl<Key>D:	  delete-character() \n\
		   Ctrl<Key>B:	  move-backward-character() \n\
		   Ctrl<Key>F:	  move-forward-character() \n\
		   Ctrl<Key>A:	  move-to-begining() \n\
		   Ctrl<Key>E:	  move-to-end()	\n\
		   Ctrl<Key>K:	  erase-to-end-of-line() \n\
		   Ctrl<Key>U:	  erase-line() \n\
		   Ctrl<Key>X:	  erase-line() \n\
		   Ctrl<Key>C:	  restart-session() \n\
		   Ctrl<Key>\\:	  abort-session() \n\
		   <Key>BackSpace:delete-previous-character() \n\
		   <Key>Delete:	  delete-previous-character() \n\
		   <Key>Return:	  finish-field() \n\
		   <Key>:	  insert-char()	\

       The actions which are supported by the widget are:

       delete-previous-character
	      Erases the character before the cursor.

       delete-character
	      Erases the character after the cursor.

       move-backward-character
	      Moves the	cursor backward.

       move-forward-character
	      Moves the	cursor forward.

       move-to-begining
	      (Apologies  about	 the spelling error.)  Moves the cursor	to the
	      beginning	of the editable	text.

       move-to-end
	      Moves the	cursor to the end of the editable text.

       erase-to-end-of-line
	      Erases all text after the	cursor.

       erase-line
	      Erases the entire	text.

       finish-field
	      If the cursor is in the name field,  proceeds  to	 the  password
	      field;  if  the cursor is	in the password	field, checks the cur-
	      rent name/password pair.	If the name/password  pair  is	valid,
	      xdm  starts  the session.	 Otherwise the failure message is dis-
	      played and the user is prompted again.

       abort-session
	      Terminates and restarts the server.

       abort-display
	      Terminates the server, disabling it.  This action	is not	acces-
	      sible  in	 the default configuration.  There are various reasons
	      to stop xdm on a system console, such as when shutting the  sys-
	      tem  down, when using xdmshell, to start another type of server,
	      or to generally access the console.  Sending xdm a  SIGHUP  will
	      restart the display.  See	the section Controlling	XDM.

       restart-session
	      Resets  the X server and starts a	new session.  This can be used
	      when the resources have been changed and you want	to  test  them
	      or when the screen has been overwritten with system messages.

       insert-char
	      Inserts the character typed.

       set-session-argument
	      Specifies	 a single word argument	which is passed	to the session
	      at startup.  See the section Session Program.

       allow-all-access
	      Disables access control in the server.  This can	be  used  when
	      the  .Xauthority file cannot be created by xdm.  Be very careful
	      using this; it might be better to	disconnect  the	 machine  from
	      the network before doing this.

       On   some  systems  (OpenBSD)  the  user's  shell  must	be  listed  in
       /etc/shells to allow login through xdm. The normal password and account
       expiration dates	are enforced too.

STARTUP	PROGRAM
       The Xstartup program is run as root when	the user logs in.  It is typi-
       cally a shell script.  Since it is run as root, Xstartup	should be very
       careful	about  security.   This	is the place to	put commands which add
       entries to /etc/utmp (the sessreg program may be	 useful	 here),	 mount
       users'  home  directories  from	file  servers, or abort	the session if
       logins are not allowed.

       In addition to any specified by DisplayManager.exportList, the  follow-
       ing environment variables are passed:

	    DISPLAY	   the associated display name
	    HOME	   the initial working directory of the	user
	    LOGNAME	   the user name
	    USER	   the user name
	    PATH	   the value of	DisplayManager.DISPLAY.systemPath
	    SHELL	   the value of	DisplayManager.DISPLAY.systemShell
	    XAUTHORITY	   may be set to an authority file

       No  arguments  are  passed  to the script.  Xdm waits until this	script
       exits before starting the user session.	If  the	 exit  value  of  this
       script  is  non-zero,  xdm  discontinues	the session and	starts another
       authentication cycle.

       The sample Xstartup file	shown  here  prevents  login  while  the  file
       /etc/nologin exists.  Thus this is not a	complete example, but simply a
       demonstration of	the available functionality.

       Here is a sample	Xstartup script:

	    #!/bin/sh
	    #
	    # Xstartup
	    #
	    # This program is run as root after	the user is verified
	    #
	    if [ -f /etc/nologin ]; then
		 xmessage -file	/etc/nologin -timeout 30 -center
		 exit 1
	    fi
	    sessreg -a -l $DISPLAY -x /usr/X11R6/lib/xdm/Xservers $LOGNAME
	    /usr/X11R6/lib/xdm/GiveConsole
	    exit 0

SESSION	PROGRAM
       The Xsession program is the command which is run	as the user's session.
       It is run with the permissions of the authorized	user.

       In  addition to any specified by	DisplayManager.exportList, the follow-
       ing environment variables are passed:

	    DISPLAY	   the associated display name
	    HOME	   the initial working directory of the	user
	    LOGNAME	   the user name
	    USER	   the user name
	    PATH	   the value of	DisplayManager.DISPLAY.userPath
	    SHELL	   the user's default shell (from getpwnam)
	    XAUTHORITY	   may be set to a non-standard	authority file
	    KRB5CCNAME	   may be set to a Kerberos credentials	cache name

       At most installations, Xsession should look in $HOME for	a file	.xses-
       sion,  which  contains  commands	 that each user	would like to use as a
       session.	 Xsession should also implement	a system default session if no
       user-specified session exists.  See the section Typical Usage.

       An  argument may	be passed to this program from the authentication wid-
       get using the `set-session-argument'  action.   This  can  be  used  to
       select different	styles of session.  One	good use of this feature is to
       allow the user to escape	from the ordinary session when it fails.  This
       allows users to repair their own	.xsession if it	fails, without requir-
       ing administrative intervention.	 The  example  following  demonstrates
       this feature.

       This example recognizes the special ``failsafe''	mode, specified	in the
       translations in the Xresources file, to	provide	 an  escape  from  the
       ordinary	 session.   It	also  requires that the	.xsession file be exe-
       cutable so we don't have	to guess what shell it wants to	use.

	    #!/bin/sh
	    #
	    # Xsession
	    #
	    # This is the program that is run as the client
	    # for the display manager.

	    case $# in
	    1)
		 case $1 in
		 failsafe)
		      exec xterm -geometry 80x24-0-0
		      ;;
		 esac
	    esac

	    startup=$HOME/.xsession
	    resources=$HOME/.Xresources

	    if [ -f "$startup" ]; then
		 exec "$startup"
	    else
		 if [ -f "$resources" ]; then
		      xrdb -load "$resources"
		 fi
		 twm &
		 xman -geometry	+10-10 &
		 exec xterm -geometry 80x24+10+10 -ls
	    fi

       The user's .xsession file  might	 look  something  like	this  example.
       Don't forget that the file must have execute permission.
	    #! /bin/csh
	    # no -f in the previous line so .cshrc gets	run to set $PATH
	    twm	&
	    xrdb -merge	"$HOME/.Xresources"
	    emacs -geometry +0+50 &
	    xbiff -geometry -430+5 &
	    xterm -geometry -0+50 -ls

RESET PROGRAM
       Symmetrical with	Xstartup, the Xreset script is run after the user ses-
       sion has	terminated.  Run as root, it should contain commands that undo
       the effects of commands in Xstartup, removing entries from /etc/utmp or
       unmounting directories from file	servers.   The	environment  variables
       that were passed	to Xstartup are	also passed to Xreset.

       A sample	Xreset script:
	    #!/bin/sh
	    #
	    # Xreset
	    #
	    # This program is run as root after	the session ends
	    #
	    sessreg -d -l $DISPLAY -x /usr/X11R6/lib/xdm/Xservers $LOGNAME
	    /usr/X11R6/lib/xdm/TakeConsole
	    exit 0

CONTROLLING THE	SERVER
       Xdm  controls local servers using POSIX signals.	 SIGHUP	is expected to
       reset the server, closing all client connections	and  performing	 other
       cleanup duties.	SIGTERM	is expected to terminate the server.  If these
       signals do not perform the expected actions, the	resources  DisplayMan-
       ager.DISPLAY.resetSignal	  and	DisplayManager.DISPLAY.termSignal  can
       specify alternate signals.

       To control remote terminals not using XDMCP, xdm	 searches  the	window
       hierarchy on the	display	and uses the protocol request KillClient in an
       attempt to clean	up the terminal	for the	next session.	This  may  not
       actually	kill all of the	clients, as only those which have created win-
       dows will be noticed.  XDMCP provides a more sure mechanism;  when  xdm
       closes  its initial connection, the session is over and the terminal is
       required	to close all other connections.

CONTROLLING XDM
       Xdm responds to two signals: SIGHUP and SIGTERM.	 When sent  a  SIGHUP,
       xdm  rereads  the  configuration	file, the access control file, and the
       servers file.  For the servers file, it notices if  entries  have  been
       added  or removed.  If a	new entry has been added, xdm starts a session
       on the associated display.  Entries which have been  removed  are  dis-
       abled  immediately, meaning that	any session in progress	will be	termi-
       nated without notice and	no new session will be started.

       When sent a SIGTERM, xdm	terminates all sessions	in progress and	exits.
       This can	be used	when shutting down the system.

       Xdm attempts to mark its	various	sub-processes for ps(1)	by editing the
       command line argument list in place.  Because xdm can't allocate	 addi-
       tional space for	this task, it is useful	to start xdm with a reasonably
       long command line (using	the full path name should  be  enough).	  Each
       process which is	servicing a display is marked -display.

ADDITIONAL LOCAL DISPLAYS
       To  add	an additional local display, add a line	for it to the Xservers
       file.  (See the section Local Server Specification.)

       Examine the display-specific resources in xdm-config (e.g., DisplayMan-
       ager._0.authorize)  and consider	which of them should be	copied for the
       new display.  The default xdm-config has	all the	appropriate lines  for
       displays	:0 and :1.

OTHER POSSIBILITIES
       You  can	 use xdm to run	a single session at a time, using the 4.3 init
       options or other	suitable daemon	by specifying the server on  the  com-
       mand line:

	    xdm	-server	":0 SUN-3/60CG4	local /usr/X11R6/bin/X :0"

       Or,  you	might have a file server and a collection of X terminals.  The
       configuration for this is identical to the  sample  above,  except  the
       Xservers	file would look	like

	    extol:0 VISUAL-19 foreign
	    exalt:0 NCD-19 foreign
	    explode:0 NCR-TOWERVIEW3000	foreign

       This  directs  xdm  to manage sessions on all three of these terminals.
       See the section Controlling Xdm for a description of using  signals  to
       enable  and disable these terminals in a	manner reminiscent of init(8).

LIMITATIONS
       One thing that xdm isn't	very good at doing is  coexisting  with	 other
       window  systems.	  To use multiple window systems on the	same hardware,
       you'll probably be more interested in xinit.

FILES
       /usr/X11R6/lib/X11/xdm/xdm-config
			   the default configuration file

       $HOME/.Xauthority   user	authorization file where xdm stores  keys  for
			   clients to read

       /usr/X11R6/lib/X11/xdm/chooser
			   the default chooser

       /usr/X11R6/bin/xrdb the default resource	database loader

       /usr/X11R6/bin/X	   the default server

       /usr/X11R6/bin/xterm
			   the default session program and failsafe client

       /usr/X11R6/lib/X11/xdm/A_display_-_suffix_
			   the default place for authorization files

       /tmp/K5C_display_   Kerberos credentials	cache

SEE ALSO
       X(7), xinit(1), xauth(1), Xsecurity(7), sessreg(1), Xserver(1),
       X Display Manager Control Protocol

AUTHOR
       Keith Packard, MIT X Consortium

X Version 11			  Release 6.6				XDM(1)

NAME | SYNOPSIS | DESCRIPTION | OVERVIEW | OPTIONS | RESOURCES | CONFIGURATION FILE | XDMCP ACCESS CONTROL | CHOOSER | LISTEN | IPv6 MULTICAST ADDRESS SPECIFICATION | LOCAL SERVER SPECIFICATION | RESOURCES FILE | SETUP PROGRAM | AUTHENTICATION WIDGET | STARTUP PROGRAM | SESSION PROGRAM | RESET PROGRAM | CONTROLLING THE SERVER | CONTROLLING XDM | ADDITIONAL LOCAL DISPLAYS | OTHER POSSIBILITIES | LIMITATIONS | FILES | SEE ALSO | AUTHOR

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=xdm&sektion=1&manpath=XFree86+4.4.0>

home | help