Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
WPI(4)		       FreeBSD Kernel Interfaces Manual			WPI(4)

NAME
     wpi -- Intel 3945ABG Wireless LAN IEEE 802.11 driver

SYNOPSIS
     To	compile	this driver into the kernel, place the following lines in your
     kernel configuration file:

	   device wpi
	   device wpifw
	   device pci
	   device wlan
	   device wlan_amrr
	   device firmware

     Alternatively, to load the	driver as a module at boot time, place the
     following line in loader.conf(5):

	   if_wpi_load="YES"

DESCRIPTION
     The wpi driver provides support for the Intel 3945ABG Wireless network
     adapter.  wpi supports station, adhoc, and	monitor	mode operation.	 Only
     one virtual interface may be configured at	any time.  For more informa-
     tion on configuring this device, see ifconfig(8).

     This driver requires the firmware built with the wpifw module to work.

FILES
     /usr/share/doc/legal/intel_wpi/LICENSE  wpi firmware license

EXAMPLES
     Join an existing BSS network (i.e., connect to an access point):

	   ifconfig wlan0 create wlandev wpi0 inet 192.168.0.20	\
	       netmask 0xffffff00

     Join a specific BSS network with network name ``my_net'':

	   ifconfig wlan0 create wlandev wpi0 ssid my_net up

     Join a specific BSS network with 64-bit WEP encryption:

	   ifconfig wlan0 create wlandev wpi0 ssid my_net \
		   wepmode on wepkey 0x1234567890 weptxkey 1 up

     Join a specific BSS network with 128-bit WEP encryption:

	   ifconfig wlan0 create wlandev wpi0 wlanmode adhoc ssid my_net \
	       wepmode on wepkey 0x01020304050607080910111213 weptxkey 1

DIAGNOSTICS
     wpi%d: could not load firmware image '%s'	The driver failed to load the
     firmware image using the firmware(9) subsystem.  Verify the wpifw
     firmware module is	installed.

     wpi%d: fatal firmware error  An unknown error has occurred	in the
     uploaded firmware,	you may	have to	unload/reload the driver to continue.

     wpi%d: Radio transmitter is switched off  The hardware switch controlling
     the radio is currently turned off.	 Data transmission is not possible in
     this state.

SEE ALSO
     wpifw(4), pci(4), wlan(4),	wlan_ccmp(4), wlan_tkip(4), wlan_wep(4),
     ifconfig(8), wpa_supplicant(8)

AUTHORS
     The original wpi driver was written for OpenBSD by	Damien Bergamini
     <damien.bergamini@free.fr>.  Benjamin Close <benjsc@FreeBSD.org> ported
     wpi to FreeBSD.

BUGS
     Not all the error messages	are documented here.

     Background	scanning is not	currently supported.

FreeBSD	9.3			October	5, 2008			   FreeBSD 9.3

NAME | SYNOPSIS | DESCRIPTION | FILES | EXAMPLES | DIAGNOSTICS | SEE ALSO | AUTHORS | BUGS

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=wpi&sektion=4&manpath=FreeBSD+9.2-RELEASE>

home | help