Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
WI(4)		       FreeBSD Kernel Interfaces Manual			 WI(4)

NAME
     wi	-- WaveLAN/IEEE, PRISM-II and Spectrum24 802.11DS wireless network
     driver

SYNOPSIS
     device wi

DESCRIPTION
     The wi driver provides support for	wireless network adapters based	around
     the Lucent	Hermes,	Intersil PRISM-II, Intersil PRISM-2.5, and Symbol
     Spectrum24	chipsets.  All four chipsets provide a similar interface to
     the driver.

     All host/device interaction is via	programmed I/O.	 Supported features
     include 802.11 and	802.3 frames, power management,	BSS, IBSS, WDS and
     old-style Lucent ad-hoc operation modes.  Cards based on the Intersil
     PRISM-II and PRISM-2.5 chips also support a host-based access point mode
     which allows a card to act	as a normal access point (with some assistance
     from the wi driver).  The Lucent Hermes and Symbol	Spectrum24 chipsets do
     not contain this functionality.  PRISM-II and PRISM-2.5 chips do not sup-
     port the WDS functionality.

     The wi driver encapsulates	all IP and ARP traffic as 802.11 frames, how-
     ever it can receive either	802.11 or 802.3	frames.	 Transmit speed	is
     selectable	between	1Mbps fixed, 2Mbps fixed, 2Mbps	with auto fallback,
     5.5Mbps, 8Mbps, or	11Mbps depending on your hardware.  The	Lucent Wave-
     LAN/IEEE Silver and Gold cards as well as the Intersil and	Symbol cards
     have support for WEP encryption.  The WaveLAN Gold	as well	as newer
     Intersil and Symbol cards support 104bit keys, the	others only accept
     40bit keys.  The Lucent WaveLAN/IEEE Bronze cards do not support WEP at
     all.  To enable encryption, use the wicontrol(8) utility to set your
     keys, or use ifconfig(8) as shown below.

     By	default, the wi	driver configures the card for BSS operation (aka in-
     frastructure mode).  This mode requires the use of	an access point	(base
     station).

     The wi driver also	supports an point-to-point mode	where the ssid is
     ignored and stations can communicate amongst themselves without the aid
     of	an access point.  Note that there are two possible point-to-point
     modes.  One mode, referred	to as ``ad-hoc demo mode'', or ``legacy	Lucent
     ad-hoc mode'', predates the IEEE 802.11 specification and so may not
     interoperate with cards from different vendors.  The standardized point-
     to-point mode, is called IBSS (or confusingly just	ad-hoc mode), but is
     not supported by cards with very old firmware revisions.  If your cards
     supports IBSS mode, it is recommended that	you use	it in preference to
     the ``ad-hoc demo mode'' in new installations.

     Cards based on the	Intersil PRISM-II and PRISM-2.5	chips also have	a
     host-based	access point mode which	allows the card	to act as an access
     point (base station).  Access points are different	than operating in IBSS
     mode.  They operate in BSS	mode.  They allow for easier roaming and
     bridge all	ethernet traffic such that machines connected via an access
     point appear to be	on the local ethernet segment.

     For more information on configuring this device, see ifconfig(8).

     Cards supported by	the wi driver come in a	variety	of packages, though
     the most common are of the	PCMCIA type.  In many cases, the PCI version
     of	a wireless card	is simply a PCMCIA card	bundled	with a PCI adapter.
     The PCI adapters come in two flavors: true	PCMCIA bridges and dumb	PCMCIA
     bridges.  A true PCMCIA bridge (such as those sold	by Lucent) will	attach
     as	a real PCMCIA controller.  The wireless	card will then attach to the
     PCMCIA bus.  Wireless cards in PCMCIA slots may be	inserted and ejected
     on	the fly.
     A dumb bridge, on the other hand, does not	show up	as a true PCMCIA bus.
     The wireless card will simply appear to the host as a normal PCI device
     and will not require any PCMCIA support.  Cards in	this type of adapter
     should only be removed when the machine is	powered	down.

     The following cards are among those supported by the wi driver:

     Card				  Chip	       Bus
     ----------------------------------------------------------------
     3Com AirConnect 3CRWE737A		  Spectrum24   PCMCIA
     3Com AirConnect 3CRWE777A		  Prism-II     PCI
     ACTIONTEC HWC01170			  Prism-2.5    PCMCIA
     Addtron AWP-100			  Prism-II     PCMCIA
     Agere Orinoco			  Hermes       PCMCIA
     Buffalo AirStation			  Prism-II     PCMCIA
     Buffalo AirStation			  Prism-II     CF
     Cabletron RoamAbout		  Hermes       PCMCIA
     Compaq Agency NC5004		  Prism-II     PCMCIA
     Contec FLEXLAN/FX-DS110-PCC	  Prism-II     PCMCIA
     Corega PCC-11			  Prism-II     PCMCIA
     Corega PCCA-11			  Prism-II     PCMCIA
     Corega PCCB-11			  Prism-II     PCMCIA
     Corega CGWLPCIA11			  Prism-II     PCI
     Dlink DWL520			  Prism-2.5    PCI
     Dlink DWL650			  Prism-2.5    PCMCIA
     ELSA XI300				  Prism-II     PCMCIA
     ELSA XI800				  Prism-II     CF
     EMTAC A2424i			  Prism-II     PCMCIA
     Ericsson Wireless LAN CARD	C11	  Spectrum24   PCMCIA
     Gemtek WL-311			  Prism-2.5    PCMCIA
     Hawking Technology	WE110P		  Prism-2.5    PCMCIA
     I-O DATA WN-B11/PCM		  Prism-II     PCMCIA
     Intel PRO/Wireless	2011		  Spectrum24   PCMCIA
     Intersil Prism II			  Prism-II     PCMCIA
     Intersil Mini-PCI			  Prism-2.5    PCI
     Linksys Instant Wireless WPC11	  Prism-II     PCMCIA
     Linksys Instant Wireless WPC11 2.5	  Prism-2.5    PCMCIA
     Lucent WaveLAN			  Hermes       PCMCIA
     NANOSPEED ROOT-RZ2000		  Prism-II     PCMCIA
     NDC/Sohoware NCP130		  Prism-II     PCI
     NEC CMZ-RT-WP			  Prism-II     PCMCIA
     Netgear MA401			  Prism-II     PCMCIA
     NTT-ME 11Mbps Wireless LAN		  Prism-II     PCMCIA
     Proxim RangeLAN-DS			  Prism-II     PCMCIA
     Samsung MagicLAN SWL-2000N		  Prism-II     PCMCIA
     Socket Low	Power WLAN-CF		  Prism-II     CF
     SMC 2602 EZ Connect (3.3V)		  Prism-II     PCI or PCMCIA
     SMC 2632 EZ Connect		  Prism-II     PCMCIA
     Symbol Spectrum24			  Spectrum24   PCMCIA
     TDK LAK-CD011WL			  Prism-II     PCMCIA

     Several vendors sell PCI adapters built around the	PLX Technology 9050 or
     9052 chip.	 The following such adapters are supported or expected to
     work:

     3Com AirConnect 3CRWE777A (3.3V)

     Belkin F5D6000 (a rebadged	WL11000P)

     Eumitcom WL11000P

     Global Sun	Technology GL24110P (untested)

     Global Sun	Technology GL24110P02

     LinkSys WDT11 (a rebadged GL24110P02)

     Netgear MA301

     US	Robotics 2415 (rebadged	WL11000P)

EXAMPLES
     The following examples utilize ifconfig(8)	for simplicity,	however,
     wicontrol(8) can also be used to set wireless parameters.

     Join an existing BSS network (ie: connect to an access point):
	   # ifconfig wi0 inet 192.168.0.20 netmask 0xffffff00

     Join a specific BSS network with network name ``my_net''.
	   # ifconfig wi0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net

     Join a specific BSS network with WEP encryption:
	   # ifconfig wi0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \
		   wepkey 0x8736639624

     Join a Lucent legacy demo ad-hoc network with network name	``my_net''.
	   # ifconfig wi0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \
		   mediaopt adhoc

     Create an IBSS network with network name ``my_net''.
	   # ifconfig wi0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \
		   mediaopt ibss-master
     Note: The infrastructure for mediaopt ibss-master has not been committed
     yet.

     Join an IBSS network with network name ``my_net''.
	   # ifconfig wi0 inet 192.168.0.22 netmask 0xffffff00 ssid my_net \
		   mediaopt ibss
     Note: The infrastructure for mediaopt ibss	has not	been committed yet.

     Create a host-based access	point (Prism only):
	   # ifconfig wi0 inet 192.168.0.10 netmask 0xffffff00 ssid my_ap \
		   mediaopt hostap

     Create a host-based access	point with WEP enabled (Prism only):
	   # ifconfig wi0 inet 192.168.0.10 netmask 0xffffff00 ssid my_ap \
		   wepkey 0x1234567890 mediaopt	hostap

     Create a host-based wireless bridge to fxp0 (Prism	only):
	   Add BRIDGE to the kernel config.
	   # ifconfig wi0 inet up ssid my_ap mediaopt hostap
	   # sysctl net.link.ether.bridge=1
	   # sysctl net.link.ether.bridge_cfg="wi0 fxp0"
	   # sysctl net.inet.ip.forwarding=1
     This will give you	approximately the same functionality as	an access
     point.

DIAGNOSTICS
     wi%d: init	failed	The WaveLAN card failed	to come	ready after an ini-
     tialization command was issued.

     wi%d: failed to allocate %d bytes on NIC  The driver was unable to	allo-
     cate memory for transmit frames in	the NIC's on-board RAM.

     wi%d: device timeout  The WaveLAN failed to generate an interrupt to
     acknowledge a transmit command.

SEE ALSO
     an(4), arp(4), netintro(4), ifmedia(4), hostname.if(5), ifconfig(8),
     wicontrol(8)

     HCF Light programming specification, http://www.wavelan.com.

HISTORY
     The wi device driver first	appeared in FreeBSD 3.0.

AUTHORS
     The wi driver was written by Bill Paul <wpaul@ctr.columbia.edu>.  This
     man page comes from OpenBSD.

CAVEATS
     The original Lucent WaveLAN cards usually default to channel 3; newer
     cards use channel 10 by default.  Non-Lucent cards	vary, for instance the
     Addtron cards use channel 11 by default.  Different regulatory domains
     have different default channels.  See wicontrol(8)	for information	on how
     to	change the channel.

     IBSS creation does	not currently work with	Symbol cards.

     Prism2 host-based access point mode has bugs for firmware versions	prior
     to	0.8.3.

     Lucent cards prior	to firmware version 6.0.4 do not support ibss mode.

FreeBSD	9.2			  May 2, 2002			   FreeBSD 9.2

NAME | SYNOPSIS | DESCRIPTION | EXAMPLES | DIAGNOSTICS | SEE ALSO | HISTORY | AUTHORS | CAVEATS

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=wi&sektion=4&manpath=FreeBSD+4.6-RELEASE>

home | help