Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
VIDCONTROL(1)		FreeBSD	General	Commands Manual		 VIDCONTROL(1)

NAME
     vidcontrol	-- system console control and configuration utility

SYNOPSIS
     vidcontrol	[-CdLHPpx] [-b color] [-c appearance] [-f [size] file]
		[-g geometry] [-h size]	[-i adapter | mode] [-l	screen_map]
		[-M char] [-m on | off]	[-r foreground background]
		[-S on | off] [-s number] [-t N	| off] [mode]
		[foreground [background]] [show]

DESCRIPTION
     The vidcontrol command is used to set various options for the syscons(4)
     console driver, such as video mode, colors, cursor	shape, screen output
     map, font and screen saver	timeout.

     The following command line	options	are supported:

     mode    Select a new video	mode.  The modes currently recognized are:
	     80x25, 80x30, 80x43, 80x50, 80x60,	132x25,	132x30,	132x43,
	     132x50, 132x60, VGA_40x25,	VGA_80x25, VGA_80x30, VGA_80x50,
	     VGA_80x60,	VGA_90x25, VGA_90x30, VGA_90x43, VGA_90x50, VGA_90x60,
	     EGA_80x25,	EGA_80x43, VESA_132x25,	VESA_132x43, VESA_132x50,
	     VESA_132x60.  The raster text mode	VESA_800x600 can also be cho-
	     sen.  See Video Mode Support below.

     foreground	[background]
	     Change colors when	displaying text.  Specify the foreground color
	     (e.g. ``vidcontrol	white''), or both a foreground and background
	     colors (e.g. ``vidcontrol yellow blue'').	Use the	show command
	     below to see available colors.

     show    See the supported colors on a given platform.

     -b	color
	     Set border	color to color.	 This option may not be	always sup-
	     ported by the video driver.

     -C	     Clear the history buffer.

     -c	normal | blink | destructive
	     Change the	cursor appearance.  The	cursor is either an inverting
	     block (normal) that can optionally	blink, or it can be like the
	     old hardware cursor (destructive).	 The latter is actually	a sim-
	     ulation.

     -d	     Print out current output screen map.

     -f	[size] file
	     Load font file for	size (currently, only 8x8, 8x14	or 8x16).  The
	     font file can be either uuencoded or in raw binary	format.	 You
	     can also use the menu-driven vidfont(1) command to	load the font
	     of	your choice.

	     Size may be omitted, in this case vidcontrol will try to guess it
	     from the size of font file.

	     Note that older video cards, such as MDA and CGA, do not support
	     software font.  See also Video Mode Support and EXAMPLES below
	     and the man page for syscons(4).

     -g	geometry
	     Set the geometry of the text mode for the modes with selectable
	     geometry.	Currently only raster modes, such as VESA_800x600,
	     support this option.  See also Video Mode Support and EXAMPLES
	     below.

     -h	size
	     Set the size of the history (scrollback) buffer to	size lines.

     -i	adapter
	     Shows info	about the current video	adapter.

     -i	mode
	     Shows the possible	video modes with the current video hardware.

     -l	screen_map
	     Install screen output map file from screen_map.  See also
	     syscons(4).

     -L	     Install default screen output map.

     -M	char
	     Sets the base character used to render the	mouse pointer to char.

     -m	on | off
	     Switch the	mouse pointer on or off.  Used together	with the
	     moused(8) daemon for text mode cut	& paste	functionality.

     -p	     Capture the current contents of the video buffer corresponding to
	     the terminal device referred to by	standard input.	 The
	     vidcontrol	utility	writes contents	of the video buffer to the
	     standard output in	a raw binary format.  For details about	that
	     format see	Format of Video	Buffer Dump below.

     -P	     Same as -p, but dump contents of the video	buffer in a plain text
	     format ignoring nonprintable characters and information about
	     text attributes.

     -H	     When used with -p or -P, it instructs vidcontrol to dump full
	     history buffer instead of visible portion of the video buffer
	     only.

     -r	foreground background
	     Change reverse mode colors	to foreground and background.

     -S	on | off
	     Turn vty switching	on or off.  When vty switching is off,
	     attempts to switch	to a different virtual terminal	will fail.
	     (The default is to	permit vty switching.)	This protection	can be
	     easily bypassed when the kernel is	compiled with the DDB option.
	     However, you probably should not compile the kernel debugger on a
	     box which is supposed to be physically secure.

     -s	number
	     Set the current vty to number.

     -t	N | off
	     Set the screensaver timeout to N seconds, or turns	it off.

     -x	     Use hexadecimal digits for	output.

   Video Mode Support
     Note that not all modes listed above may be supported by the video	hard-
     ware.  You	can verify which mode is supported by the video	hardware,
     using the -i mode option.

     The VESA BIOS support must	be linked to the kernel	or loaded as a KLD
     module if you wish	to use VESA video modes	or 132 column modes (see
     vga(4)).

     You need to compile your kernel with the VGA_WIDTH90 option if you	wish
     to	use VGA	90 column modes	(see vga(4)).

     Video modes other than 25 and 30 line modes may require specific size of
     font.  Use	-f option above	to load	a font file to the kernel.  If the
     required size of font has not been	loaded to the kernel, vidcontrol will
     fail if the user attempts to set a	new video mode.

     Modes	      Font size
     25	line modes    8x16 (VGA), 8x14 (EGA)
     30	line modes    8x16
     43	line modes    8x8
     50	line modes    8x8
     60	line modes    8x8

     It	is better to always load all three sizes (8x8, 8x14 and	8x16) of the
     same font.

     You may set variables in /etc/rc.conf or /etc/rc.conf.local so that
     desired font files	will be	automatically loaded when the system starts
     up.  See below.

     If	you want to use	the raster text	mode VESA_800x600, you need to recom-
     pile your kernel with the SC_PIXEL_MODE option.  See syscons(4) for more
     details on	this kernel option.

   Format of Video Buffer Dump
     The vidcontrol utility uses the syscons(4)	CONS_SCRSHOT ioctl(2) to cap-
     ture the current contents of the video buffer.  The vidcontrol utility
     writes version and	additional information to the standard output, fol-
     lowed by the contents of the terminal device.

     VGA video memory is typically arranged in two byte	tuples,	one per	char-
     acter position.  In each tuple, the first byte will be the	character
     code, and the second byte is the character's color	attribute.

     The VGA color attribute byte looks	like this:

     bits#		  width	   meaning
     7	    <X0000000>	  1	   character blinking
     6:4    <0XXX0000>	  3	   background color
     3	    <0000X000>	  1	   bright foreground color
     2:0    <00000XXX>	  3	   foreground color

     Here is a list of the three bit wide base colors:

	   0	   Black
	   1	   Blue
	   2	   Green
	   3	   Cyan
	   4	   Red
	   5	   Magenta
	   6	   Brown
	   7	   Light Grey

     Base colors with bit 3 (the bright	foreground flag) set:

	   0	   Dark	Grey
	   1	   Light Blue
	   2	   Light Green
	   3	   Light Cyan
	   4	   Light Red
	   5	   Light Magenta
	   6	   Yellow
	   7	   White

     For example, the two bytes

	   65 158

     specify an	uppercase A (character code 65), blinking (bit 7 set) in yel-
     low (bits 3:0) on a blue background (bits 6:4).

     The vidcontrol output contains a small header which includes additional
     information which may be useful to	utilities processing the output.

     The first 10 bytes	are always arranged as follows:

	   Byte	Range	 Contents
	   1 thru 8	 Literal text ``SCRSHOT_''
	   9		 File format version number
	   10		 Remaining number of bytes in the header

     Subsequent	bytes depend on	the version number.

	   Version    Byte	   Meaning
	   1	      11	   Terminal width, in characters
		      12	   Terminal depth, in characters
		      13 and up	   The snapshot	data

     So	a dump of an 80x25 screen would	start (in hex)

	   53 43 52 53 48 4f 54	5f 01 02 50 19
	   ----------------------- -- -- -- --
		     |		    |  |  |  ` 25 decimal
		     |		    |  |  `--- 80 decimal
		     |		    |  `------ 2 remaining bytes of header data
		     |		    `--------- File format version 1
		     `------------------------ Literal "SCRSHOT_"

VIDEO OUTPUT CONFIGURATION
   Boot	Time Configuration
     You may set the following variables in /etc/rc.conf or /etc/rc.conf.local
     in	order to configure the video output at boot time.

     blanktime	  Sets the timeout value for the -t option.
     font8x16, font8x14, font8x8
		  Specifies font files for the -f option.
     scrnmap	  Specifies a screen output map	file for the -l	option.

     See rc.conf(5) for	more details.

   Driver Configuration
     The video card driver may let you change default configuration options,
     such as the default font, so that you do not need to set up the options
     at	boot time.  See	video card driver manuals, (e.g. vga(4)) for details.

FILES
     /usr/share/syscons/fonts/*		  font files.
     /usr/share/syscons/scrnmaps/*	  screen output	map files.

EXAMPLES
     If	you want to load /usr/share/syscons/fonts/iso-8x16.fnt to the kernel,
     run vidcontrol as:

	   vidcontrol -f 8x16 /usr/share/syscons/fonts/iso-8x16.fnt

     So	long as	the font file is in /usr/share/syscons/fonts, you may abbrevi-
     ate the file name as iso-8x16:

	   vidcontrol -f 8x16 iso-8x16

     Furthermore, you can also omit font size ``8x16'':

	   vidcontrol -f iso-8x16

     Moreover, the suffix specifying the font size can be also omitted;	in
     this case,	vidcontrol will	use the	size of	the currently displayed	font
     to	construct the suffix:

	   vidcontrol -f iso

     Likewise, you can also abbreviate the screen output map file name for the
     -l	option if the file is found in /usr/share/syscons/scrnmaps.

	   vidcontrol -l iso-8859-1_to_cp437

     The above command will load
     /usr/share/syscons/scrnmaps/iso-8859-1_to_cp437.scm.

     The following command will	set-up a 100x37	raster text mode (useful for
     some LCD models):

	   vidcontrol -g 100x37	VESA_800x600

     The following command will	capture	the contents of	the first virtual ter-
     minal, and	redirect the output to the shot.scr file:

	   vidcontrol -p < /dev/ttyv0 >	shot.scr

     The following command will	dump contents of the fourth virtual terminal
     to	the standard output in the human readable format:

	   vidcontrol -P < /dev/ttyv3

SEE ALSO
     kbdcontrol(1), vidfont(1),	keyboard(4), screen(4),	syscons(4), vga(4),
     rc.conf(5), kldload(8), moused(8),	watch(8)

     The various scr2* utilities in the	graphics and textproc categories of
     the Ports Collection.

AUTHORS
     Soren Schmidt <sos@FreeBSD.org>

CONTRIBUTORS
     Maxim Sobolev <sobomax@FreeBSD.org>, Nik Clayton <nik@FreeBSD.org>

FreeBSD	10.1			 May 27, 2002			  FreeBSD 10.1

NAME | SYNOPSIS | DESCRIPTION | VIDEO OUTPUT CONFIGURATION | FILES | EXAMPLES | SEE ALSO | AUTHORS | CONTRIBUTORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=vidcontrol&sektion=1&manpath=FreeBSD+5.4-RELEASE>

home | help