Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
UPLCOM(4)	       FreeBSD Kernel Interfaces Manual		     UPLCOM(4)

NAME
     uplcom -- USB support for Prolific	PL-2303/2303X/2303HX serial adapters
     driver

SYNOPSIS
     To	compile	this driver into the kernel, place the following lines in your
     kernel configuration file:

	   device uplcom
	   device ucom

     Alternatively, to load the	driver as a module at boot time, place the
     following line in loader.conf(5):

	   uplcom_load="YES"

DESCRIPTION
     The uplcom	driver provides	support	for various serial adapters based on
     the Prolific PL-2303, PL-2303X and	PL-2303HX USB-to-RS232 Bridge chips.

     The device	is accessed through the	ucom(4)	driver which makes it behave
     like a tty(4).

HARDWARE
     The uplcom	driver supports	the following adapters:

     +o	 ATEN UC-232A
     +o	 BAFO BF-800
     +o	 BAFO BF-810
     +o	 Belkin	F5U257
     +o	 ELECOM	UC-SGT
     +o	 HAL Corporation Crossam2+USB IR commander
     +o	 Hama USB RS-232 Serial	Adapter
     +o	 Hamlet	exagerate XURS232
     +o	 IOGEAR	UC-232A
     +o	 I/O DATA USB-RSAQ
     +o	 I/O DATA USB-RSAQ2
     +o	 I/O DATA USB-RSAQ3
     +o	 Mobile	Action MA-620 Infrared Adapter
     +o	 PLANEX	USB-RS232 URS-03
     +o	 RATOC REX-USB60
     +o	 Radio Shack USB Serial	Cable
     +o	 Sandberg USB to Serial	Link (model number 133-08)
     +o	 SOURCENEXT KeikaiDenwa	8 (with	and without charger)
     +o	 Sony Ericsson USB Cable (Susteen USB Data Cable)
     +o	 Willcom W-SIM DD PHS terminal.(WS002IN)

SEE ALSO
     tty(4), ucom(4), usb(4)

HISTORY
     The uplcom	driver appeared	in NetBSD 1.6.	This manual page was adopted
     from NetBSD by Tom	Rhodes <trhodes@FreeBSD.org> in	April 2002.

FreeBSD	9.2		       November	22, 2006		   FreeBSD 9.2

NAME | SYNOPSIS | DESCRIPTION | HARDWARE | SEE ALSO | HISTORY

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=uplcom&sektion=4&manpath=FreeBSD+8.1-RELEASE>

home | help