Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
UHSOCTL(1)		FreeBSD	General	Commands Manual		    UHSOCTL(1)

NAME
     uhsoctl --	connection utility for Option based devices

SYNOPSIS
     uhsoctl [-a apn] [-c cid] [-p pin]	[-u username] [-k password] [-r	path]
	     [-f path] [-b | -n] interface
     uhsoctl -d	interface
     uhsoctl -h

DESCRIPTION
     uhsoctl is	a small	connection utility for Option N.V. devices that	are
     based on Options packet interface and uses	proprietary AT_* calls to
     establish connections.  The utility (tries	to) configure both default
     route and name servers (/etc/resolv.conf).

     By	default	uhsoctl	detaches from the terminal upon	on a successful	con-
     nection, a	few command-line options exists	that allows this behavior to
     be	changed.

     uhsoctl attempts to find a	usable controlling serial port based on	the
     provided network interface.  If this fails	you might specify a serial
     port manually.

OPTIONS
     -a	apn
	   Specify APN to connect to.

     -c	cid
	   Specify CID (Context	ID) to use, by default CID 1 is	used.  If an
	   APN has been	configured once, it's enough to	specify	the CID	used
	   for further accesses.

     -p	pin
	   Specify SIM PIN.

     -u	username
	   Specify username.

     -k	password
	   Specify username.

     -r	path
	   Path	to resolv.conf,	default	/etc/resolv.conf.  Use /dev/null to
	   disable updating of name servers.

     -f	path
	   Explicitly set the serial port to use as controlling	terminal.
	   Might be needed if the automatic detection fails.

     -b	   Fork	into background	directly, before a connection has been estab-
	   lished.

     -n	   Never fork into background, run entirely in foreground.

EXAMPLES
     Connect to	``apn.example.com'' on interface ``uhso0'' and use PIN
     ``1234'' to enable	the SIM	card.
	   uhsoctl -a apn.example.com -p 1234 uhso0

     Disconnect	from a previously established connection.
	   uhsoctl -d uhso0

SEE ALSO
     uhso(4)

FreeBSD	10.1			 Aug 12, 2009			  FreeBSD 10.1

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLES | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=uhsoctl&sektion=1&manpath=FreeBSD+10.0-RELEASE>

home | help