Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
TERMCAP(5)                FreeBSD File Formats Manual               TERMCAP(5)

NAME
     termcap -- terminal capability data base

SYNOPSIS
     termcap

DESCRIPTION
     The termcap file is a data base describing terminals, used, for example,
     by vi(1) and ncurses(3).  Terminals are described in termcap by giving a
     set of capabilities that they have and by describing how operations are
     performed.  Padding requirements and initialization sequences are
     included in termcap.

     Entries in termcap consist of a number of `:'-separated fields.  The
     first entry for each terminal gives the names that are known for the ter-
     minal, separated by `|' characters.  The first name given is the most
     common abbreviation for the terminal.  The last name given should be a
     long name fully identifying the terminal, and all others are understood
     as synonyms for the terminal name.  All names but the last should be in
     lower case and contain no blanks; the last name may well contain upper
     case characters and blanks for readability.

     Terminal names (except for the last, verbose entry) should be chosen
     using the following conventions.  The particular piece of hardware making
     up the terminal should have a root name chosen, thus ``hp2621'' This name
     should not contain hyphens.  Modes that the hardware can be in or user
     preferences should be indicated by appending a hyphen and an indicator of
     the mode.  Therefore, a ``vt100'' in 132-column mode would be
     ``vt100-w''.  The following suffixes should be used where possible:

           Suffix    Meaning                                       Example
           -w        Wide mode (more than 80 columns)              vt100-w
           -am       With automatic margins (usually default)      vt100-am
           -nam      Without automatic margins                     vt100-nam
           -n        Number of lines on screen                     aaa-60
           -na       No arrow keys (leave them in local)           concept100-na
           -np       Number of pages of memory                     concept100-4p
           -rv       Reverse video                                 concept100-rv

CAPABILITIES
     The description field attempts to convey the semantics of the capability.
     You may find some codes in the description field:

     (P)     indicates that padding may be specified.

     #[1-9]  in the description field indicates that the string is passed
             through tparm(3) or tgoto(3) with parms as given (#i).

     (P*)    indicates that padding may vary in proportion to the number of
             lines affected.

     (#i)    indicates the ith parameter.

     These are the boolean capabilities:

     Boolean                 TCap    Description
     Variables               Code
     auto_left_margin        bw      cursor_left wraps from column 0 to last
                                     column
     auto_right_margin       am      terminal has automatic margins
     no_esc_ctlc             xb      beehive (f1=escape, f2=ctrl C)
     ceol_standout_glitch    xs      standout not erased by overwriting (hp)
     eat_newline_glitch      xn      newline ignored after 80 cols (concept)
     erase_overstrike        eo      can erase overstrikes with a blank
     generic_type            gn      generic line type
     hard_copy               hc      hardcopy terminal
     has_meta_key            km      Has a meta key, sets msb high
     has_status_line         hs      has extra status line
     insert_null_glitch      in      insert mode distinguishes nulls
     memory_above            da      display may be retained above the screen
     memory_below            db      display may be retained below the screen
     move_insert_mode        mi      safe to move while in insert mode
     move_standout_mode      ms      safe to move while in standout mode
     over_strike             os      terminal can overstrike
     status_line_esc_ok      es      escape can be used on the status line
     dest_tabs_magic_smso    xt      tabs destructive, magic so char (t1061)
     tilde_glitch            hz      cannot print ~'s (hazeltine)
     transparent_underline   ul      underline character overstrikes
     xon_xoff                xo      terminal uses xon/xoff handshaking
     needs_xon_xoff          nx      padding will not work, xon/xoff required
     prtr_silent             5i      printer will not echo on screen
     hard_cursor             HC      cursor is hard to see
     non_rev_rmcup           NR      enter_ca_mode does not reverse exit_ca_mode
     no_pad_char             NP      pad character does not exist
     non_dest_scroll_region  ND      scrolling region is non-destructive
     can_change              cc      terminal can re-define existing colors
     back_color_erase        ut      screen erased with background color
     hue_lightness_saturation        hl      terminal uses only HLS color
                                             notation (tektronix)
     col_addr_glitch         YA      only positive motion for column address and
                                     micro_column_address caps
     cr_cancels_micro_mode   YB      using cr turns off micro mode
     has_print_wheel         YC      printer needs operator to change character
                                     set
     row_addr_glitch         YD      only positive motion for row_address and
                                     micro_row_address caps
     semi_auto_right_margin  YE      printing in last column causes cr
     cpi_changes_res         YF      changing character pitch changes resolution
     lpi_changes_res         YG      changing line pitch changes resolution

     These are the numeric capabilities:

     Numeric                 TCap    Description
     Variables               Code
     columns                 co      number of columns in aline
     init_tabs               it      tabs initially every # spaces
     lines                   li      number of lines on screen or page
     lines_of_memory         lm      lines of memory if > line. 0 => varies
     magic_cookie_glitch     sg      number of blank chars left by
                                     enter_standout_mode or exit_standout_mode
     padding_baud_rate       pb      lowest baud rate where padding needed
     virtual_terminal        vt      virtual terminal number (CB/unix)
     width_status_line       ws      columns in status line
     num_labels              Nl      number of labels on screen
     label_height            lh      rows in each label
     label_width             lw      columns in each label
     max_attributes          ma      maximum combined attributes terminal can
                                     handle
     maximum_windows         MW      maximum number of definable windows
     magic_cookie_glitch_ul  ug      number of blanks left by underline
     #
     # These came in with SVr4's color support
     #
     max_colors              Co      maximum numbers of colors on screen
     max_pairs               pa      maximum number of color-pairs on the screen
     no_color_video          NC      video attributes that cannot be used with
                                     colors
     #
     # The following numeric capabilities are present in the SVr4.0 term
     # structure, but are not yet documented in the man page.
     # They came in with SVr4's printer support.
     #
     buffer_capacity         Ya      numbers of bytes buffered before printing
     dot_vert_spacing        Yb      spacing of pins vertically in pins per inch
     dot_horz_spacing        Yc      spacing of dots horizontally in dots per
                                     inch
     max_micro_address       Yd      maximum value in micro_..._address
     max_micro_jump          Ye      maximum value in parm_..._micro
     micro_char_size         Yf      character size when in micro mode
     micro_line_size         Yg      line size when in micro mode
     number_of_pins          Yh      numbers of pins in print-head
     output_res_char         Yi      horizontal resolution in units per line
     output_res_line         Yj      vertical resolution in units per line
     output_res_horz_inch    Yk      horizontal resolution in units per inch
     output_res_vert_inch    Yl      vertical resolution in units per inch
     print_rate              Ym      print rate in chars per second
     wide_char_size          Yn      character step size when in double wide
                                     mode
     buttons                 BT      number of buttons on mouse
     bit_image_entwining     Yo      number of passed for each bit-image row
     bit_image_type          Yp      type of bit-image device

     These are the string capabilities:

     String                  TCap    Description
     Variables               Code
     back_tab                bt      back tab (P)
     bell                    bl      audible signal (bell) (P)
     carriage_return         cr      carriage return (P*)
     change_scroll_region    cs      change region to line #1 to line #2 (P)
     clear_all_tabs          ct      clear all tab stops (P)
     clear_screen            cl      clear screen and home cursor (P*)
     clr_eol                 ce      clear to end of line (P)
     clr_eos                 cd      clear to end of screen (P*)
     column_address          ch      horizontal position #1, absolute (P)
     command_character       CC      terminal settable cmd character in
                                     prototype
     cursor_address          cm      move to row #1 columns #2
     cursor_down             do      down one line
     cursor_home             ho      home cursor
     cursor_invisible        vi      make cursor invisible
     cursor_left             le      move left one space
     cursor_mem_address      CM      memory relative cursor addressing
     cursor_normal           ve      make cursor appear normal (undo
                                     cursor_invisible/cursor_visible)
     cursor_right            nd      move right one space
     cursor_to_ll            ll      last line, first column
     cursor_up               up      up one line
     cursor_visible          vs      make cursor very visible
     delete_character        dc      delete character (P*)
     delete_line             dl      delete line (P*)
     dis_status_line         ds      disable status line
     down_half_line          hd      half a line down
     enter_alt_charset_mode  as      start alternate character set (P)
     enter_blink_mode        mb      turn on blinking
     enter_bold_mode         md      turn on bold (extra bright) mode
     enter_ca_mode           ti      string to start programs using
                                     cursor_address
     enter_delete_mode       dm      enter delete mode
     enter_dim_mode          mh      turn on half-bright mode
     enter_insert_mode       im      enter insert mode
     enter_secure_mode       mk      turn on blank mode (characters invisible)
     enter_protected_mode    mp      turn on protected mode
     enter_reverse_mode      mr      turn on reverse video mode
     enter_standout_mode     so      begin standout mode
     enter_underline_mode    us      begin underline mode
     erase_chars             ec      erase #1 characters (P)
     exit_alt_charset_mode   ae      end alternate character set (P)
     exit_attribute_mode     me      turn off all attributes
     exit_ca_mode            te      strings to end programs using cup
     exit_delete_mode        ed      end delete mode
     exit_insert_mode        ei      exit insert mode
     exit_standout_mode      se      exit standout mode
     exit_underline_mode     ue      exit underline mode
     flash_screen            vb      visible bell (may not move cursor)
     form_feed               ff      hardcopy terminal page eject (P*)
     from_status_line        fs      return from status line
     init_1string            i1      initialization string
     init_2string            is      initialization string
     init_3string            i3      initialization string
     init_file               if      name of initialization file
     insert_character        ic      insert character (P)
     insert_line             al      insert line (P*)
     insert_padding          ip      insert padding after inserted character
     key_backspace           kb      backspace key
     key_catab               ka      clear-all-tabs key
     key_clear               kC      clear-screen or erase key
     key_ctab                kt      clear-tab key
     key_dc                  kD      delete-character key
     key_dl                  kL      delete-line key
     key_down                kd      down-arrow key
     key_eic                 kM      sent by rmir or smir in insert mode
     key_eol                 kE      clear-to-end-of-line key
     key_eos                 kS      clear-to-end-of-screen key
     key_f0                  k0      F0 function key
     key_f1                  k1      F1 function key
     key_f10                 k;      F10 function key
     key_f2                  k2      F2 function key
     key_f3                  k3      F3 function key
     key_f4                  k4      F4 function key
     key_f5                  k5      F5 function key
     key_f6                  k6      F6 function key
     key_f7                  k7      F7 function key
     key_f8                  k8      F8 function key
     key_f9                  k9      F9 function key
     key_home                kh      home key
     key_ic                  kI      insert-character key
     key_il                  kA      insert-line key
     key_left                kl      left-arrow key
     key_ll                  kH      last-line key
     key_npage               kN      next-page key
     key_ppage               kP      prev-page key
     key_right               kr      right-arrow key
     key_sf                  kF      scroll-forward key
     key_sr                  kR      scroll-backward key
     key_stab                kT      set-tab key
     key_up                  ku      up-arrow key
     keypad_local            ke      leave 'keyboard_transmit' mode
     keypad_xmit             ks      enter 'keyboard_transmit' mode
     lab_f0                  l0      label on function key f0 if not f0
     lab_f1                  l1      label on function key f1 if not f1
     lab_f10                 la      label on function key f10 if not f10
     lab_f2                  l2      label on function key f2 if not f2
     lab_f3                  l3      label on function key f3 if not f3
     lab_f4                  l4      label on function key f4 if not f4
     lab_f5                  l5      label on function key f5 if not f5
     lab_f6                  l6      label on function key f6 if not f6
     lab_f7                  l7      label on function key f7 if not f7
     lab_f8                  l8      label on function key f8 if not f8
     lab_f9                  l9      label on function key f9 if not f9
     meta_off                mo      turn off meta mode
     meta_on                 mm      turn on meta mode (8th-bit on)
     newline                 nw      newline (behave like cr followed by lf)
     pad_char                pc      padding char (instead of null)
     parm_dch                DC      delete #1 chars (P*)
     parm_delete_line        DL      delete #1 lines (P*)
     parm_down_cursor        DO      down #1 lines (P*)
     parm_ich                IC      insert #1 chars (P*)
     parm_index              SF      scroll forward #1 lines (P)
     parm_insert_line        AL      insert #1 lines (P*)
     parm_left_cursor        LE      move #1 chars to the left (P)
     parm_right_cursor       RI      move #1 chars to the right (P*)
     parm_rindex             SR      scroll back #1 lines (P)
     parm_up_cursor          UP      up #1 lines (P*)
     pkey_key                pk      program function key #1 to type string #2
     pkey_local              pl      program function key #1 to execute
                                     string #2
     pkey_xmit               px      program function key #1 to transmit
                                     string #2
     print_screen            ps      print contents of screen
     prtr_off                pf      turn off printer
     prtr_on                 po      turn on printer
     repeat_char             rp      repeat char #1 #2 times (P*)
     reset_1string           r1      reset string
     reset_2string           r2      reset string
     reset_3string           r3      reset string
     reset_file              rf      name of reset file
     restore_cursor          rc      restore cursor to last position of
                                     save_cursor
     row_address             cv      vertical position #1 absolute (P)
     save_cursor             sc      save current cursor position (P)
     scroll_forward          sf      scroll text up (P)
     scroll_reverse          sr      scroll text down (P)
     set_attributes          sa      define video attributes #1-#9 (PG9)
     set_tab                 st      set a tab in every row, current columns
     set_window              wi      current window is lines #1-#2 cols #3-#4
     tab                     ta      tab to next 8-space hardware tab stop
     to_status_line          ts      move to status line
     underline_char          uc      underline char and move past it
     up_half_line            hu      half a line up
     init_prog               iP      path name of program for initialization
     key_a1                  K1      upper left of keypad
     key_a3                  K3      upper right of keypad
     key_b2                  K2      center of keypad
     key_c1                  K4      lower left of keypad
     key_c3                  K5      lower right of keypad
     prtr_non                pO      turn on printer for #1 bytes
     termcap_init2           i2      secondary initialization string
     termcap_reset           rs      terminal reset string
     #
     # SVr1 capabilities stop here.  IBM's version of terminfo is the same as
     # SVr4 up to this point, but has a different set afterwards.
     #
     char_padding            rP      like insert_padding but when in insert mode
     acs_chars               ac      graphics charset pairs - def=vt100
     plab_norm               pn      program label #1 to show string #2
     key_btab                kB      back-tab key
     enter_xon_mode          SX      turn on xon/xoff handshaking
     exit_xon_mode           RX      turn off xon/xoff handshaking
     enter_am_mode           SA      turn on automatic margins
     exit_am_mode            RA      turn off automatic margins
     xon_character           XN      XON character
     xoff_character          XF      XOFF character
     ena_acs                 eA      enable alternate char set
     label_on                LO      turn on soft labels
     label_off               LF      turn off soft labels
     key_beg                 @1      begin key
     key_cancel              @2      cancel key
     key_close               @3      close key
     key_command             @4      command key
     key_copy                @5      copy key
     key_create              @6      create key
     key_end                 @7      end key
     key_enter               @8      enter/send key
     key_exit                @9      exit key
     key_find                @0      find key
     key_help                %1      help key
     key_mark                %2      mark key
     key_message             %3      message key
     key_move                %4      move key
     key_next                %5      next key
     key_open                %6      open key
     key_options             %7      options key
     key_previous            %8      previous key
     key_print               %9      print key
     key_redo                %0      redo key
     key_reference           &1      reference key
     key_refresh             &2      refresh key
     key_replace             &3      replace key
     key_restart             &4      restart key
     key_resume              &5      resume key
     key_save                &6      save key
     key_suspend             &7      suspend key
     key_undo                &8      undo key
     key_sbeg                &9      shifted key
     key_scancel             &0      shifted key
     key_scommand            *1      shifted key
     key_scopy               *2      shifted key
     key_screate             *3      shifted key
     key_sdc                 *4      shifted key
     key_sdl                 *5      shifted key
     key_select              *6      select key
     key_send                *7      shifted key
     key_seol                *8      shifted key
     key_sexit               *9      shifted key
     key_sfind               *0      shifted key
     key_shelp               #1      shifted key
     key_shome               #2      shifted key
     key_sic                 #3      shifted key
     key_sleft               #4      shifted key
     key_smessage            %a      shifted key
     key_smove               %b      shifted key
     key_snext               %c      shifted key
     key_soptions            %d      shifted key
     key_sprevious           %e      shifted key
     key_sprint              %f      shifted key
     key_sredo               %g      shifted key
     key_sreplace            %h      shifted key
     key_sright              %i      shifted key
     key_srsume              %j      shifted key
     key_ssave               !1      shifted key
     key_ssuspend            !2      shifted key
     key_sundo               !3      shifted key
     req_for_input           RF      send next input char (for ptys)
     key_f11                 F1      F11 function key
     key_f12                 F2      F12 function key
     key_f13                 F3      F13 function key
     key_f14                 F4      F14 function key
     key_f15                 F5      F15 function key
     key_f16                 F6      F16 function key
     key_f17                 F7      F17 function key
     key_f18                 F8      F18 function key
     key_f19                 F9      F19 function key
     key_f20                 FA      F20 function key
     key_f21                 FB      F21 function key
     key_f22                 FC      F22 function key
     key_f23                 FD      F23 function key
     key_f24                 FE      F24 function key
     key_f25                 FF      F25 function key
     key_f26                 FG      F26 function key
     key_f27                 FH      F27 function key
     key_f28                 FI      F28 function key
     key_f29                 FJ      F29 function key
     key_f30                 FK      F30 function key
     key_f31                 FL      F31 function key
     key_f32                 FM      F32 function key
     key_f33                 FN      F33 function key
     key_f34                 FO      F34 function key
     key_f35                 FP      F35 function key
     key_f36                 FQ      F36 function key
     key_f37                 FR      F37 function key
     key_f38                 FS      F38 function key
     key_f39                 FT      F39 function key
     key_f40                 FU      F40 function key
     key_f41                 FV      F41 function key
     key_f42                 FW      F42 function key
     key_f43                 FX      F43 function key
     key_f44                 FY      F44 function key
     key_f45                 FZ      F45 function key
     key_f46                 Fa      F46 function key
     key_f47                 Fb      F47 function key
     key_f48                 Fc      F48 function key
     key_f49                 Fd      F49 function key
     key_f50                 Fe      F50 function key
     key_f51                 Ff      F51 function key
     key_f52                 Fg      F52 function key
     key_f53                 Fh      F53 function key
     key_f54                 Fi      F54 function key
     key_f55                 Fj      F55 function key
     key_f56                 Fk      F56 function key
     key_f57                 Fl      F57 function key
     key_f58                 Fm      F58 function key
     key_f59                 Fn      F59 function key
     key_f60                 Fo      F60 function key
     key_f61                 Fp      F61 function key
     key_f62                 Fq      F62 function key
     key_f63                 Fr      F63 function key
     clr_bol                 cb      Clear to beginning of line
     clear_margins           MC      clear right and left soft margins
     set_left_margin         ML      set left soft margin
     set_right_margin        MR      set right soft margin
     label_format            Lf      label format
     set_clock               SC      set clock, #1 hrs #2 mins #3 secs
     display_clock           DK      display clock at (#1,#2)
     remove_clock            RC      remove clock
     create_window           CW      define a window #1 from #2, #3 to #4, #5
     goto_window             WG      go to window #1
     hangup                  HU      hang-up phone
     dial_phone              DI      dial number #1
     quick_dial              QD      dial number #1 without checking
     tone                    TO      select touch tone dialing
     pulse                   PU      select pulse dialling
     flash_hook              fh      flash switch hook
     fixed_pause             PA      pause for 2-3 seconds
     wait_tone               WA      wait for dial-tone
     user0                   u0      User string #0
     user1                   u1      User string #1
     user2                   u2      User string #2
     user3                   u3      User string #3
     user4                   u4      User string #4
     user5                   u5      User string #5
     user6                   u6      User string #6
     user7                   u7      User string #7
     user8                   u8      User string #8
     user9                   u9      User string #9
     #
     # SVr4 added these capabilities to support color
     #
     orig_pair               op      Set default pair to its original value
     orig_colors             oc      Set all color pairs to the original ones
     initialize_color        Ic      initialize color #1 to (#2,#3,#4)
     initialize_pair         Ip      Initialize color pair #1 to fg=(#2,#3,#4),
                                     bg=(#5,#6,#7)
     set_color_pair          sp      Set current color pair to #1
     set_foreground          Sf      Set foreground color #1
     set_background          Sb      Set background color #1
     #
     # SVr4 added these capabilities to support printers
     #
     change_char_pitch       ZA      Change number of characters per inch
     change_line_pitch       ZB      Change number of lines per inch
     change_res_horz         ZC      Change horizontal resolution
     change_res_vert         ZD      Change vertical resolution
     define_char             ZE      Define a character
     enter_doublewide_mode   ZF      Enter double-wide mode
     enter_draft_quality     ZG      Enter draft-quality mode
     enter_italics_mode      ZH      Enter italic mode
     enter_leftward_mode     ZI      Start leftward carriage motion
     enter_micro_mode        ZJ      Start micro-motion mode
     enter_near_letter_quality       ZK      Enter NLQ mode
     enter_normal_quality    ZL      Enter normal-quality mode
     enter_shadow_mode       ZM      Enter shadow-print mode
     enter_subscript_mode    ZN      Enter subscript mode
     enter_superscript_mode  ZO      Enter superscript mode
     enter_upward_mode       ZP      Start upward carriage motion
     exit_doublewide_mode    ZQ      End double-wide mode
     exit_italics_mode       ZR      End italic mode
     exit_leftward_mode      ZS      End left-motion mode
     exit_micro_mode         ZT      End micro-motion mode
     exit_shadow_mode        ZU      End shadow-print mode
     exit_subscript_mode     ZV      End subscript mode
     exit_superscript_mode   ZW      End superscript mode
     exit_upward_mode        ZX      End reverse character motion
     micro_column_address    ZY      Like column_address in micro mode
     micro_down              ZZ      Like cursor_down in micro mode
     micro_left              Za      Like cursor_left in micro mode
     micro_right             Zb      Like cursor_right in micro mode
     micro_row_address       Zc      Like row_address in micro mode
     micro_up                Zd      Like cursor_up in micro mode
     order_of_pins           Ze      Match software bits to print-head pins
     parm_down_micro         Zf      Like parm_down_cursor in micro mode
     parm_left_micro         Zg      Like parm_left_cursor in micro mode
     parm_right_micro        Zh      Like parm_right_cursor in micro mode
     parm_up_micro           Zi      Like parm_up_cursor in micro mode
     select_char_set         Zj      Select character set
     set_bottom_margin       Zk      Set bottom margin at current line
     set_bottom_margin_parm  Zl      Set bottom margin at line #1 or #2 lines
                                     from bottom
     set_left_margin_parm    Zm      Set left (right) margin at column #1 (#2)
     set_right_margin_parm   Zn      Set right margin at column #1
     set_top_margin          Zo      Set top margin at current line
     set_top_margin_parm     Zp      Set top (bottom) margin at row #1 (#2)
     start_bit_image         Zq      Start printing bit image graphics
     start_char_set_def      Zr      Start character set definition
     stop_bit_image          Zs      Stop printing bit image graphics
     stop_char_set_def       Zt      End definition of character aet
     subscript_characters    Zu      List of subscriptible characters
     superscript_characters  Zv      List of superscriptible characters
     these_cause_cr          Zw      Printing any of these chars causes CR
     zero_motion             Zx      No motion for subsequent character
     #
     # The following string capabilities are present in the SVr4.0 term
     # structure, but are not documented in the man page.
     #
     char_set_names          Zy      List of character set names
     key_mouse               Km      Mouse event has occurred
     mouse_info              Mi      Mouse status information
     req_mouse_pos           RQ      Request mouse position
     get_mouse               Gm      Curses should get button events
     set_a_foreground        AF      Set ANSI foreground color
     set_a_background        AB      Set ANSI background color
     pkey_plab               xl      Program function key #1 to type string #2
                                     and show string #3
     device_type             dv      Indicate language/codeset support
     code_set_init           ci      Init sequence for multiple codesets
     set0_des_seq            s0      Shift to code set 0 (EUC set 0, ASCII)
     set1_des_seq            s1      Shift to code set 1
     set2_des_seq            s2      Shift to code set 2
     set3_des_seq            s3      Shift to code set 3
     set_lr_margin           ML      Set both left and right margins to #1, #2
     set_tb_margin           MT      Sets both top and bottom margins to #1, #2
     bit_image_repeat        Xy      Repeat bit image cell #1 #2 times
     bit_image_newline       Zz      Move to next row of the bit image
     bit_image_carriage_return       Yv      Move to beginning of same row
     color_names             Yw      Give name for color #1
     define_bit_image_region Yx      Define rectangular bit image region
     end_bit_image_region    Yy      End a bit-image region
     set_color_band          Yz      Change to ribbon color #1
     set_page_length         YZ      Set page length to #1 lines
     #
     # SVr4 added these capabilities for direct PC-clone support
     #
     display_pc_char         S1      Display PC character
     enter_pc_charset_mode   S2      Enter PC character display mode
     exit_pc_charset_mode    S3      Exit PC character display mode
     enter_scancode_mode     S4      Enter PC scancode mode
     exit_scancode_mode      S5      Exit PC scancode mode
     pc_term_options         S6      PC terminal options
     scancode_escape         S7      Escape for scancode emulation
     alt_scancode_esc        S8      Alternate escape for scancode emulation
     #
     # The XSI Curses standard added these.
     #
     enter_horizontal_hl_mode        Xh      Enter horizontal highlight mode
     enter_left_hl_mode      Xl      Enter left highlight mode
     enter_low_hl_mode       Xo      Enter low highlight mode
     enter_right_hl_mode     Xr      Enter right highlight mode
     enter_top_hl_mode       Xt      Enter top highlight mode
     enter_vertical_hl_mode  Xv      Enter vertical highlight mode

     Obsolete termcap capabilities.  New software should not rely on them at
     all.

     Boolean                 TCap    Description
     Variables               Code
     linefeed_is_newline     NL      move down with ^J
     even_parity             EP      terminal requires even parity
     odd_parity              OP      terminal requires odd parity
     half_duplex             HD      terminal is half-duplex
     lower_case_only         LC      terminal has only lower case
     upper_case_only         UC      terminal has only upper case
     has_hardware_tabs       pt      has 8-char tabs invoked with ^I
     return_does_clr_eol     xr      return clears the line
     tek_4025_insert_line    xx      Tektronix 4025 insert-line glitch
     backspaces_with_bs      bs      uses ^H to move left
     crt_no_scrolling        ns      crt cannot scroll
     no_correctly_working_cr nc      no way to go to start of line

     Number                  TCap    Description
     Variables               Code
     backspace_delay         dB      padding required for ^H
     form_feed_delay         dF      padding required for ^L
     horizontal_tab_delay    dT      padding required for ^I
     vertical_tab_delay      dV      padding required for ^V
     number_of_function_keys kn      count of function keys
     carriage_return_delay   dC      pad needed for CR
     new_line_delay          dN      pad needed for LF

     String                  TCap    Description
     Variables               Code
     other_non_function_keys ko      list of self-mapped keycaps
     arrow_key_map           ma      map arrow keys
     memory_lock_above       ml      lock visible screen memory above the
                                     current line
     memory_unlock           mu      unlock visible screen memory above the
                                     current line
     linefeed_if_not_lf      nl      use to move down
     backspace_if_not_bs     bc      move left, if not ^H

   A Sample Entry
     The following entry, which describes the Concept-100, is among the more
     complex entries in the termcap file as of this writing.

     ca|concept100|c100|concept|c104|concept100-4p|HDS Concept-100:\
             :al=3*\E^R:am:bl=^G:cd=16*\E^C:ce=16\E^U:cl=2*^L:cm=\Ea%+ %+ :\
             :co#80:.cr=9^M:db:dc=16\E^A:dl=3*\E^B:do=^J:ei=\E\200:eo:im=\E^P:in:\
             :ip=16*:is=\EU\Ef\E7\E5\E8\El\ENH\EK\E\200\Eo&\200\Eo\47\E:k1=\E5:\
             :k2=\E6:k3=\E7:kb=^h:kd=\E<:ke=\Ex:kh=\E?:kl=\E>:kr=\E=:ks=\EX:\
             :ku=\E;:le=^H:li#24:mb=\EC:me=\EN\200:mh=\EE:mi:mk=\EH:mp=\EI:\
             :mr=\ED:nd=\E=:pb#9600:rp=0.2*\Er%.%+ :se=\Ed\Ee:sf=^J:so=\EE\ED:\
             :.ta=8\t:te=\Ev    \200\200\200\200\200\200\Ep\r\n:\
             :ti=\EU\Ev  8p\Ep\r:ue=\Eg:ul:up=\E;:us=\EG:\
             :vb=\Ek\200\200\200\200\200\200\200\200\200\200\200\200\200\200\EK:\
             :ve=\Ew:vs=\EW:vt#8:xn:\
             :bs:cr=^M:dC#9:dT#8:nl=^J:ta=^I:pt:

     Entries may continue onto multiple lines by giving a \ as the last char-
     acter of a line, and empty fields may be included for readability (here
     between the last field on a line and the first field on the next).  Com-
     ments may be included on lines beginning with ``#''.

   Types of Capabilities
     Capabilities in termcap are of three types: Boolean capabilities, which
     indicate particular features that the terminal has; numeric capabilities,
     giving the size of the display or the size of other attributes; and
     string capabilities, which give character sequences that can be used to
     perform particular terminal operations.  All capabilities have two-letter
     codes.  For instance, the fact that the Concept has automatic margins (an
     automatic return and linefeed when the end of a line is reached) is indi-
     cated by the Boolean capability am.  Hence the description of the Concept
     includes am.

     Numeric capabilities are followed by the character `#' then the value.
     In the example above co, which indicates the number of columns the dis-
     play has, gives the value `80' for the Concept.

     Finally, string-valued capabilities, such as ce (clear-to-end-of-line
     sequence) are given by the two-letter code, an `=', then a string ending
     at the next following `:'.  A delay in milliseconds may appear after the
     `=' in such a capability, which causes padding characters to be supplied
     by tputs(3) after the remainder of the string is sent to provide this
     delay.  The delay can be either a number, such as `20', or a number fol-
     lowed by an `*', such as `3*'.  An `*' indicates that the padding
     required is proportional to the number of lines affected by the opera-
     tion, and the amount given is the per-affected-line padding required.
     (In the case of insert-character, the factor is still the number of lines
     affected; this is always 1 unless the terminal has in and the software
     uses it.)  When an `*' is specified, it is sometimes useful to give a
     delay of the form `3.5' to specify a delay per line to tenths of mil-
     liseconds.  (Only one decimal place is allowed.)

     A number of escape sequences are provided in the string-valued capabili-
     ties for easy encoding of control characters there.  \E maps to an ESC
     character, ^X maps to a control-X for any appropriate X, and the
     sequences \n \r \t \b \f map to linefeed, return, tab, backspace, and
     formfeed, respectively.  Finally, characters may be given as three octal
     digits after a \, and the characters ^ and \ may be given as \^ and \\.
     If it is necessary to place a : in a capability it must be escaped as \:
     or be encoded as \072.  If it is necessary to place a NUL character in a
     string capability it must be encoded as \200.  (The routines that deal
     with termcap use C strings and strip the high bits of the output very
     late, so that a \200 comes out as a \000 would.)

     Sometimes individual capabilities must be commented out.  To do this, put
     a period before the capability name.  For example, see the first cr and
     ta in the example above.

   Preparing Descriptions
     The most effective way to prepare a terminal description is by imitating
     the description of a similar terminal in termcap and to build up a
     description gradually, using partial descriptions with vi(1) to check
     that they are correct.  Be aware that a very unusual terminal may expose
     deficiencies in the ability of the termcap file to describe it or bugs in
     vi(1).  To easily test a new terminal description you are working on you
     can put it in your home directory in a file called .termcap and programs
     will look there before looking in /usr/share/misc/termcap.  You can also
     set the environment variable TERMPATH to a list of absolute file path-
     names (separated by spaces or colons), one of which contains the descrip-
     tion you are working on, and programs will search them in the order
     listed, and nowhere else.  See termcap(3).  The TERMCAP environment vari-
     able is usually set to the termcap entry itself to avoid reading files
     when starting up a program.

     To get the padding for insert-line right (if the terminal manufacturer
     did not document it), a severe test is to use vi(1) to edit /etc/passwd
     at 9600 baud, delete roughly 16 lines from the middle of the screen, then
     hit the `u' key several times quickly.  If the display messes up, more
     padding is usually needed.  A similar test can be used for insert-charac-
     ter.

   Basic Capabilities
     The number of columns on each line of the display is given by the co
     numeric capability.  If the display is a CRT, then the number of lines on
     the screen is given by the li capability.  If the display wraps around to
     the beginning of the next line when the cursor reaches the right margin,
     then it should have the am capability.  If the terminal can clear its
     screen, the code to do this is given by the cl string capability.  If the
     terminal overstrikes (rather than clearing the position when a character
     is overwritten), it should have the os capability.  If the terminal is a
     printing terminal, with no soft copy unit, give it both hc and os.  (os
     applies to storage scope terminals, such as the Tektronix 4010 series, as
     well as to hard copy and APL terminals.)  If there is a code to move the
     cursor to the left edge of the current row, give this as cr.  (Normally
     this will be carriage-return, ^M.)  If there is a code to produce an
     audible signal (bell, beep, etc.), give this as bl.

     If there is a code (such as backspace) to move the cursor one position to
     the left, that capability should be given as le.  Similarly, codes to
     move to the right, up, and down should be given as nd, up, and do,
     respectively.  These local cursor motions should not alter the text they
     pass over; for example, you would not normally use ``nd= '' unless the
     terminal has the os capability, because the space would erase the charac-
     ter moved over.

     A very important point here is that the local cursor motions encoded in
     termcap have undefined behavior at the left and top edges of a CRT dis-
     play.  Programs should never attempt to backspace around the left edge,
     unless bw is given, and never attempt to go up off the top using local
     cursor motions.

     In order to scroll text up, a program goes to the bottom left corner of
     the screen and sends the sf (index) string.  To scroll text down, a pro-
     gram goes to the top left corner of the screen and sends the sr (reverse
     index) string.  The strings sf and sr have undefined behavior when not on
     their respective corners of the screen.  Parameterized versions of the
     scrolling sequences are SF and SR, which have the same semantics as sf
     and sr except that they take one parameter and scroll that many lines.
     They also have undefined behavior except at the appropriate corner of the
     screen.

     The am capability tells whether the cursor sticks at the right edge of
     the screen when text is output there, but this does not necessarily apply
     to nd from the last column.  Leftward local motion is defined from the
     left edge only when bw is given; then an le from the left edge will move
     to the right edge of the previous row.  This is useful for drawing a box
     around the edge of the screen, for example.  If the terminal has switch-
     selectable automatic margins, the termcap description usually assumes
     that this feature is on, i.e., am.  If the terminal has a command that
     moves to the first column of the next line, that command can be given as
     nw (newline).  It is permissible for this to clear the remainder of the
     current line, so if the terminal has no correctly-working CR and LF it
     may still be possible to craft a working nw out of one or both of them.

     These capabilities suffice to describe hardcopy and ``glass-tty'' termi-
     nals.  Thus the Teletype model 33 is described as

           T3|tty33|33|tty|Teletype model 33:\
                   :bl=^G:co#72:cr=^M:do=^J:hc:os:

     and the Lear Siegler ADM-3 is described as

           l3|adm3|3|LSI ADM-3:\
           :am:bl=^G:cl=^Z:co#80:cr=^M:do=^J:le=^H:li#24:sf=^J:

   Parameterized Strings
     Cursor addressing and other strings requiring parameters are described by
     a parameterized string capability, with printf(3)-like escapes %x in it,
     while other characters are passed through unchanged.  For example, to
     address the cursor the cm capability is given, using two parameters: the
     row and column to move to.  (Rows and columns are numbered from zero and
     refer to the physical screen visible to the user, not to any unseen mem-
     ory.  If the terminal has memory-relative cursor addressing, that can be
     indicated by an analogous CM capability.)

     The % encodings have the following meanings:

     %%       output `%'
     %d       output value as in printf(3) %d
     %2       output value as in printf(3) %2d
     %3       output value as in printf(3) %3d
     %.       output value as in printf(3) %c
     %+x      add x to value, then do %.
     %>xy     if value > x then add y, no output
     %r       reverse order of two parameters, no output
     %i       increment by one, no output
     %n       exclusive-or all parameters with 0140 (Datamedia 2500)
     %B       BCD (16*(value/10)) + (value%10), no output
     %D       Reverse coding (value - 2*(value%16)), no output (Delta Data).

     Consider the Hewlett-Packard 2645, which, to get to row 3 and column 12,
     needs to be sent ``\E&a12c03Y'' padded for 6 milliseconds.  Note that the
     order of the row and column coordinates is reversed here and that the row
     and column are sent as two-digit integers.  Thus its cm capability is
     ``cm=6\E&%r%2c%2Y''.

     The Datamedia 2500 needs the current row and column sent encoded in
     binary using ``%.''.  Terminals that use ``%.'' need to be able to
     backspace the cursor (le) and to move the cursor up one line on the
     screen (up).  This is necessary because it is not always safe to transmit
     \n, ^D, and \r, as the system may change or discard them.  (Programs
     using termcap must set terminal modes so that tabs are not expanded, so
     \t is safe to send.  This turns out to be essential for the Ann Arbor
     4080.)

     A final example is the Lear Siegler ADM-3a, which offsets row and column
     by a blank character, thus ``cm=\E=%+ %+ ''.

     Row or column absolute cursor addressing can be given as single parameter
     capabilities ch (horizontal position absolute) and cv (vertical position
     absolute).  Sometimes these are shorter than the more general two-parame-
     ter sequence (as with the Hewlett-Packard 2645) and can be used in pref-
     erence to cm.  If there are parameterized local motions (e.g., move n
     positions to the right) these can be given as DO, LE, RI, and UP with a
     single parameter indicating how many positions to move.  These are pri-
     marily useful if the terminal does not have cm, such as the Tektronix
     4025.

   Cursor Motions
     If the terminal has a fast way to home the cursor (to the very upper left
     corner of the screen), this can be given as ho.  Similarly, a fast way of
     getting to the lower left-hand corner can be given as ll; this may
     involve going up with up from the home position, but a program should
     never do this itself (unless ll does), because it can make no assumption
     about the effect of moving up from the home position.  Note that the home
     position is the same as cursor address (0,0): to the top left corner of
     the screen, not of memory.  (Therefore, the ``\EH'' sequence on Hewlett-
     Packard terminals cannot be used for ho.)

   Area Clears
     If the terminal can clear from the current position to the end of the
     line, leaving the cursor where it is, this should be given as ce.  If the
     terminal can clear from the current position to the end of the display,
     this should be given as cd.  cd must only be invoked from the first col-
     umn of a line.  (Therefore, it can be simulated by a request to delete a
     large number of lines, if a true cd is not available.)

   Insert/Delete Line
     If the terminal can open a new blank line before the line containing the
     cursor, this should be given as al; this must be invoked only from the
     first position of a line.  The cursor must then appear at the left of the
     newly blank line.  If the terminal can delete the line that the cursor is
     on, this should be given as dl; this must only be used from the first
     position on the line to be deleted.  Versions of al and dl which take a
     single parameter and insert or delete that many lines can be given as AL
     and DL.  If the terminal has a settable scrolling region (like the
     VT100), the command to set this can be described with the cs capability,
     which takes two parameters: the top and bottom lines of the scrolling
     region.  The cursor position is, alas, undefined after using this com-
     mand.  It is possible to get the effect of insert or delete line using
     this command -- the sc and rc (save and restore cursor) commands are also
     useful.  Inserting lines at the top or bottom of the screen can also be
     done using sr or sf on many terminals without a true insert/delete line,
     and is often faster even on terminals with those features.

     If the terminal has the ability to define a window as part of memory
     which all commands affect, it should be given as the parameterized string
     wi.  The four parameters are the starting and ending lines in memory and
     the starting and ending columns in memory, in that order.  (This
     terminfo(5) capability is described for completeness.  It is unlikely
     that any termcap-using program will support it.)

     If the terminal can retain display memory above the screen, then the da
     capability should be given; if display memory can be retained below, then
     db should be given.  These indicate that deleting a line or scrolling may
     bring non-blank lines up from below or that scrolling back with sr may
     bring down non-blank lines.

   Insert/Delete Character
     There are two basic kinds of intelligent terminals with respect to
     insert/delete character that can be described using termcap.  The most
     common insert/delete character operations affect only the characters on
     the current line and shift characters off the end of the line rigidly.
     Other terminals, such as the Concept-100 and the Perkin Elmer Owl, make a
     distinction between typed and untyped blanks on the screen, shifting upon
     an insert or delete only to an untyped blank on the screen which is
     either eliminated or expanded to two untyped blanks.  You can determine
     the kind of terminal you have by clearing the screen then typing text
     separated by cursor motions.  Type ``abc    def'' using local cursor
     motions (not spaces) between the ``abc'' and the ``def''.  Then position
     the cursor before the ``abc'' and put the terminal in insert mode.  If
     typing characters causes the rest of the line to shift rigidly and char-
     acters to fall off the end, then your terminal does not distinguish
     between blanks and untyped positions.  If the ``abc'' shifts over to the
     ``def'' which then move together around the end of the current line and
     onto the next as you insert, then you have the second type of terminal
     and should give the capability in, which stands for ``insert null''.
     While these are two logically separate attributes (one line vs.  multi-
     line insert mode, and special treatment of untyped spaces), we have seen
     no terminals whose insert mode cannot be described with the single
     attribute.

     The termcap entries can describe both terminals that have an insert mode
     and terminals that send a simple sequence to open a blank position on the
     current line.  Give as im the sequence to get into insert mode.  Give as
     ei the sequence to leave insert mode.  Now give as ic any sequence that
     needs to be sent just before each character to be inserted.  Most termi-
     nals with a true insert mode will not give ic; terminals that use a
     sequence to open a screen position should give it here.  (If your termi-
     nal has both, insert mode is usually preferable to ic.  Do not give both
     unless the terminal actually requires both to be used in combination.)
     If post-insert padding is needed, give this as a number of milliseconds
     in ip (a string option).  Any other sequence that may need to be sent
     after insertion of a single character can also be given in ip.  If your
     terminal needs to be placed into an `insert mode' and needs a special
     code preceding each inserted character, then both im/ ei and ic can be
     given, and both will be used.  The IC capability, with one parameter n,
     will repeat the effects of ic n times.

     It is occasionally necessary to move around while in insert mode to
     delete characters on the same line (e.g., if there is a tab after the
     insertion position).  If your terminal allows motion while in insert
     mode, you can give the capability mi to speed up inserting in this case.
     Omitting mi will affect only speed.  Some terminals (notably Datamedia's)
     must not have mi because of the way their insert mode works.

     Finally, you can specify dc to delete a single character, DC with one
     parameter n to delete n characters, and delete mode by giving dm and ed
     to enter and exit delete mode (which is any mode the terminal needs to be
     placed in for dc to work).

   Highlighting, Underlining, and Visible Bells
     If your terminal has one or more kinds of display attributes, these can
     be represented in a number of different ways.  You should choose one dis-
     play form as standout mode, representing a good high-contrast, easy-on-
     the-eyes format for highlighting error messages and other attention get-
     ters.  (If you have a choice, reverse video plus half-bright is good, or
     reverse video alone.)  The sequences to enter and exit standout mode are
     given as so and se, respectively.  If the code to change into or out of
     standout mode leaves one or even two blank spaces or garbage characters
     on the screen, as the TVI 912 and Teleray 1061 do, then sg should be
     given to tell how many characters are left.

     Codes to begin underlining and end underlining can be given as us and ue,
     respectively.  Underline mode change garbage is specified by ug, similar
     to sg.  If the terminal has a code to underline the current character and
     move the cursor one position to the right, such as the Microterm Mime,
     this can be given as uc.

     Other capabilities to enter various highlighting modes include mb (blink-
     ing), md (bold or extra bright), mh (dim or half-bright), mk (blanking or
     invisible text), mp (protected), mr (reverse video), me (turn off all
     attribute modes), as (enter alternate character set mode), and ae (exit
     alternate character set mode).  Turning on any of these modes singly may
     or may not turn off other modes.

     If there is a sequence to set arbitrary combinations of mode, this should
     be given as sa (set attributes), taking 9 parameters.  Each parameter is
     either 0 or 1, as the corresponding attributes is on or off.  The 9
     parameters are, in order: standout, underline, reverse, blink, dim, bold,
     blank, protect, and alternate character set.  Not all modes need be sup-
     ported by sa, only those for which corresponding attribute commands
     exist.  (It is unlikely that a termcap-using program will support this
     capability, which is defined for compatibility with terminfo(5).)

     Terminals with the ``magic cookie'' glitches (sg and ug), rather than
     maintaining extra attribute bits for each character cell, instead deposit
     special ``cookies'', or ``garbage characters'', when they receive mode-
     setting sequences, which affect the display algorithm.

     Some terminals, such as the Hewlett-Packard 2621, automatically leave
     standout mode when they move to a new line or when the cursor is
     addressed.  Programs using standout mode should exit standout mode on
     such terminals before moving the cursor or sending a newline.  On termi-
     nals where this is not a problem, the ms capability should be present to
     say that this overhead is unnecessary.

     If the terminal has a way of flashing the screen to indicate an error
     quietly (a bell replacement), this can be given as vb; it must not move
     the cursor.

     If the cursor needs to be made more visible than normal when it is not on
     the bottom line (to change, for example, a non-blinking underline into an
     easier-to-find block or blinking underline), give this sequence as vs.
     If there is a way to make the cursor completely invisible, give that as
     vi.  The capability ve, which undoes the effects of both of these modes,
     should also be given.

     If your terminal correctly displays underlined characters (with no spe-
     cial codes needed) even though it does not overstrike, then you should
     give the capability ul.  If overstrikes are erasable with a blank, this
     should be indicated by giving eo.

   Keypad
     If the terminal has a keypad that transmits codes when the keys are
     pressed, this information can be given.  Note that it is not possible to
     handle terminals where the keypad only works in local mode (this applies,
     for example, to the unshifted Hewlett-Packard 2621 keys).  If the keypad
     can be set to transmit or not transmit, give these codes as ks and ke.
     Otherwise the keypad is assumed to always transmit.  The codes sent by
     the left-arrow, right-arrow, up-arrow, down-arrow, and home keys can be
     given as kl, kr, ku, kd, and kh, respectively.  If there are function
     keys such as f0, f1, ..., f9, the codes they send can be given as k0, k1,
     ..., k9.  If these keys have labels other than the default f0 through f9,
     the labels can be given as l0, l1, ..., l9.  The codes transmitted by
     certain other special keys can be given: kH (home down), kb (backspace),
     ka (clear all tabs), kt (clear the tab stop in this column), kC (clear
     screen or erase), kD (delete character), kL (delete line), kM (exit
     insert mode), kE (clear to end of line), kS (clear to end of screen), kI
     (insert character or enter insert mode), kA (insert line), kN (next
     page), kP (previous page), kF (scroll forward/down), kR (scroll back-
     ward/up), and kT (set a tab stop in this column).  In addition, if the
     keypad has a 3 by 3 array of keys including the four arrow keys, then the
     other five keys can be given as K1, K2, K3, K4, and K5.  These keys are
     useful when the effects of a 3 by 3 directional pad are needed.  The
     obsolete ko capability formerly used to describe ``other'' function keys
     has been completely supplanted by the above capabilities.

     The ma entry is also used to indicate arrow keys on terminals that have
     single-character arrow keys.  It is obsolete but still in use in version
     2 of vi which must be run on some minicomputers due to memory limita-
     tions.  This field is redundant with kl, kr, ku, kd, and kh.  It consists
     of groups of two characters.  In each group, the first character is what
     an arrow key sends, and the second character is the corresponding vi com-
     mand.  These commands are h for kl, j for kd, k for ku, l for kr, and H
     for kh.  For example, the Mime would have ``ma=^Hh^Kj^Zk^Xl'' indicating
     arrow keys left (^H), down (^K), up (^Z), and right (^X).  (There is no
     home key on the Mime.)

   Tabs and Initialization
     If the terminal needs to be in a special mode when running a program that
     uses these capabilities, the codes to enter and exit this mode can be
     given as ti and te.  This arises, for example, from terminals like the
     Concept with more than one page of memory.  If the terminal has only mem-
     ory-relative cursor addressing and not screen-relative cursor addressing,
     a screen-sized window must be fixed into the display for cursor address-
     ing to work properly.  This is also used for the Tektronix 4025, where ti
     sets the command character to be the one used by termcap.

     Other capabilities include is, an initialization string for the terminal,
     and if, the name of a file containing long initialization strings.  These
     strings are expected to set the terminal into modes consistent with the
     rest of the termcap description.  They are normally sent to the terminal
     by the tset(1) program each time the user logs in.  They will be printed
     in the following order: is; setting tabs using ct and st; and finally if.
     (Terminfo uses i1-i2 instead of is and runs the program iP and prints i3
     after the other initializations.)  A pair of sequences that does a harder
     reset from a totally unknown state can be analogously given as rs and if.
     These strings are output by the reset(1) program, which is used when the
     terminal gets into a wedged state.  (Terminfo uses r1-r3 instead of rs.)
     Commands are normally placed in rs and rf only if they produce annoying
     effects on the screen and are not necessary when logging in.  For exam-
     ple, the command to set the VT100 into 80-column mode would normally be
     part of is, but it causes an annoying glitch of the screen and is not
     normally needed since the terminal is usually already in 80-column mode.

     If the terminal has hardware tabs, the command to advance to the next tab
     stop can be given as ta (usually ^I).  A ``backtab'' command which moves
     leftward to the previous tab stop can be given as bt.  By convention, if
     the terminal driver modes indicate that tab stops are being expanded by
     the computer rather than being sent to the terminal, programs should not
     use ta or bt even if they are present, since the user may not have the
     tab stops properly set.  If the terminal has hardware tabs that are ini-
     tially set every n positions when the terminal is powered up, then the
     numeric parameter it is given, showing the number of positions between
     tab stops.  This is normally used by the tset(1) command to determine
     whether to set the driver mode for hardware tab expansion, and whether to
     set the tab stops.  If the terminal has tab stops that can be saved in
     nonvolatile memory, the termcap description can assume that they are
     properly set.

     If there are commands to set and clear tab stops, they can be given as ct
     (clear all tab stops) and st (set a tab stop in the current column of
     every row).  If a more complex sequence is needed to set the tabs than
     can be described by this, the sequence can be placed in is or if.

   Delays
     Certain capabilities control padding in the terminal driver.  These are
     primarily needed by hardcopy terminals and are used by the tset(1) pro-
     gram to set terminal driver modes appropriately.  Delays embedded in the
     capabilities cr, sf, le, ff, and ta will cause the appropriate delay bits
     to be set in the terminal driver.  If pb (padding baud rate) is given,
     these values can be ignored at baud rates below the value of pb.  For
     4.2BSD tset(1), the delays are given as numeric capabilities dC, dN, dB,
     dF, and dT instead.

   Miscellaneous
     If the terminal requires other than a NUL (zero) character as a pad, this
     can be given as pc.  Only the first character of the pc string is used.

     If the terminal has commands to save and restore the position of the cur-
     sor, give them as sc and rc.

     If the terminal has an extra ``status line'' that is not normally used by
     software, this fact can be indicated.  If the status line is viewed as an
     extra line below the bottom line, then the capability hs should be given.
     Special strings to go to a position in the status line and to return from
     the status line can be given as ts and fs.  (fs must leave the cursor
     position in the same place that it was before ts.  If necessary, the sc
     and rc strings can be included in ts and fs to get this effect.)  The
     capability ts takes one parameter, which is the column number of the sta-
     tus line to which the cursor is to be moved.  If escape sequences and
     other special commands such as tab work while in the status line, the
     flag es can be given.  A string that turns off the status line (or other-
     wise erases its contents) should be given as ds.  The status line is nor-
     mally assumed to be the same width as the rest of the screen, i.e., co.
     If the status line is a different width (possibly because the terminal
     does not allow an entire line to be loaded), then its width in columns
     can be indicated with the numeric parameter ws.

     If the terminal can move up or down half a line, this can be indicated
     with hu (half-line up) and hd (half-line down).  This is primarily useful
     for superscripts and subscripts on hardcopy terminals.  If a hardcopy
     terminal can eject to the next page (form feed), give this as ff (usually
     ^L).

     If there is a command to repeat a given character a given number of times
     (to save time transmitting a large number of identical characters), this
     can be indicated with the parameterized string rp.  The first parameter
     is the character to be repeated and the second is the number of times to
     repeat it.  (This is a terminfo(5) feature that is unlikely to be sup-
     ported by a program that uses termcap.)

     If the terminal has a settable command character, such as the Tektronix
     4025, this can be indicated with CC.  A prototype command character is
     chosen which is used in all capabilities.  This character is given in the
     CC capability to identify it.  The following convention is supported on
     some UNIX systems: The environment is to be searched for a CC variable,
     and if found, all occurrences of the prototype character are replaced by
     the character in the environment variable.  This use of the CC environ-
     ment variable is a very bad idea, as it conflicts with make(1).

     Terminal descriptions that do not represent a specific kind of known ter-
     minal, such as switch, dialup, patch, and network, should include the gn
     (generic) capability so that programs can complain that they do not know
     how to talk to the terminal.  (This capability does not apply to virtual
     terminal descriptions for which the escape sequences are known.)

     If the terminal uses xoff/xon (DC3/DC1) handshaking for flow control,
     give xo.  Padding information should still be included so that routines
     can make better decisions about costs, but actual pad characters will not
     be transmitted.

     If the terminal has a ``meta key'' which acts as a shift key, setting the
     8th bit of any character transmitted, then this fact can be indicated
     with km.  Otherwise, software will assume that the 8th bit is parity and
     it will usually be cleared.  If strings exist to turn this ``meta mode''
     on and off, they can be given as mm and mo.

     If the terminal has more lines of memory than will fit on the screen at
     once, the number of lines of memory can be indicated with lm.  An
     explicit value of 0 indicates that the number of lines is not fixed, but
     that there is still more memory than fits on the screen.

     If the terminal is one of those supported by the UNIX system virtual ter-
     minal protocol, the terminal number can be given as vt.

     Media copy strings which control an auxiliary printer connected to the
     terminal can be given as ps: print the contents of the screen; pf: turn
     off the printer; and po: turn on the printer.  When the printer is on,
     all text sent to the terminal will be sent to the printer.  It is unde-
     fined whether the text is also displayed on the terminal screen when the
     printer is on.  A variation pO takes one parameter and leaves the printer
     on for as many characters as the value of the parameter, then turns the
     printer off.  The parameter should not exceed 255.  All text, including
     pf, is transparently passed to the printer while pO is in effect.

     Strings to program function keys can be given as pk, pl, and px.  Each of
     these strings takes two parameters: the function key number to program
     (from 0 to 9) and the string to program it with.  Function key numbers
     out of this range may program undefined keys in a terminal-dependent man-
     ner.  The differences among the capabilities are that pk causes pressing
     the given key to be the same as the user typing the given string; pl
     causes the string to be executed by the terminal in local mode; and px
     causes the string to be transmitted to the computer.  Unfortunately, due
     to lack of a definition for string parameters in termcap, only
     terminfo(5) supports these capabilities.

   Glitches and Braindamage
     Hazeltine terminals, which do not allow `~' characters to be displayed,
     should indicate hz.

     The nc capability, now obsolete, formerly indicated Datamedia terminals,
     which echo \r \n for carriage return then ignore a following linefeed.

     Terminals that ignore a linefeed immediately after an am wrap, such as
     the Concept, should indicate xn.

     If ce is required to get rid of standout (instead of merely writing nor-
     mal text on top of it), xs should be given.

     Teleray terminals, where tabs turn all characters moved over to blanks,
     should indicate xt (destructive tabs).  This glitch is also taken to mean
     that it is not possible to position the cursor on top of a ``magic
     cookie'', and that to erase standout mode it is necessary to use delete
     and insert line.

     The Beehive Superbee, which is unable to correctly transmit the ESC or ^C
     characters, has xb, indicating that the ``f1'' key is used for ESC and
     ``f2'' for ^C.  (Only certain Superbees have this problem, depending on
     the ROM.)

     Other specific terminal problems may be corrected by adding more capabil-
     ities of the form x x.

   Similar Terminals
     If there are two very similar terminals, one can be defined as being just
     like the other with certain exceptions.  The string capability tc can be
     given with the name of the similar terminal.  This capability must be
     last, and the combined length of the entries must not exceed 1024.  The
     capabilities given before tc override those in the terminal type invoked
     by tc.  A capability can be canceled by placing xx@ to the left of the tc
     invocation, where xx is the capability.  For example, the entry

           hn|2621-nl:ks@:ke@:tc=2621:

     defines a ``2621-nl'' that does not have the ks or ke capabilities, hence
     does not turn on the function key labels when in visual mode.  This is
     useful for different modes for a terminal, or for different user prefer-
     ences.

FILES
     /usr/share/misc/termcap     File containing terminal descriptions.
     /usr/share/misc/termcap.db  Hash database file containing terminal
                                 descriptions (see cap_mkdb(1)).

SEE ALSO
     cap_mkdb(1), ex(1), more(1), tset(1), ul(1), vi(1), ncurses(3),
     printf(3), termcap(3), term(5)

CAVEATS AND BUGS
     The Note: termcap functions were replaced by terminfo(5) in AT&T System V
     UNIX Release 2.0.  The transition will be relatively painless if capabil-
     ities flagged as ``obsolete'' are avoided.

     Lines and columns are now stored by the kernel as well as in the termcap
     entry.  Most programs now use the kernel information primarily; the
     information in this file is used only if the kernel does not have any
     information.

     The vi(1) program allows only 256 characters for string capabilities, and
     the routines in termlib(3) do not check for overflow of this buffer.  The
     total length of a single entry (excluding only escaped newlines) may not
     exceed 1024.

     Not all programs support all entries.

HISTORY
     The termcap file format appeared in 3BSD.

FreeBSD 6.2                     April 16, 1994                     FreeBSD 6.2

NAME | SYNOPSIS | DESCRIPTION | CAPABILITIES | FILES | SEE ALSO | CAVEATS AND BUGS | HISTORY

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=termcap&sektion=5&manpath=FreeBSD+6.2-RELEASE>

home | help