Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
TCPDUMP(1)							    TCPDUMP(1)

NAME
       tcpdump - dump traffic on a network

SYNOPSIS
       tcpdump [ -AbdDefhHIJKlLnNOpqRStuUvxX ] [ -B buffer_size	] [ -c count ]
	       [ -C file_size ]	[ -G rotate_seconds ] [	-F file	]
	       [ -i interface ]	[ -j tstamp_type ] [ -m	module ] [ -M secret ]
	       [ -r file ] [ -V	file ] [ -s snaplen ] [	-T type	] [ -w file ]
	       [ -W filecount ]
	       [ -E spi@ipaddr algo:secret,...	]
	       [ -y datalinktype ] [ -z	postrotate-command ] [ -Z user ]
	       [ expression ]

DESCRIPTION
       Tcpdump	prints	out a description of the contents of packets on	a net-
       work interface that match the boolean expression.  It can also  be  run
       with the	-w flag, which causes it to save the packet data to a file for
       later analysis, and/or with the -r flag,	which causes it	to read	from a
       saved packet file rather	than to	read packets from a network interface.
       It can also be run with the -V flag, which causes it to read a list  of
       saved  packet  files.  In all cases, only packets that match expression
       will be processed by tcpdump.

       Tcpdump will, if	not run	with the -c flag, continue  capturing  packets
       until  it is interrupted	by a SIGINT signal (generated, for example, by
       typing your interrupt character,	typically control-C) or	a SIGTERM sig-
       nal  (typically generated with the kill(1) command); if run with	the -c
       flag, it	will capture packets until it is interrupted by	 a  SIGINT  or
       SIGTERM	signal or the specified	number of packets have been processed.

       When tcpdump finishes capturing packets,	it will	report counts of:

	      packets ``captured'' (this is the	number of packets that tcpdump
	      has received and processed);

	      packets  ``received  by filter'' (the meaning of this depends on
	      the OS on	which you're running tcpdump, and possibly on the  way
	      the OS was configured - if a filter was specified	on the command
	      line, on some OSes it counts packets regardless of whether  they
	      were  matched  by	 the  filter expression	and, even if they were
	      matched by the filter expression,	regardless of whether  tcpdump
	      has  read	 and  processed	them yet, on other OSes	it counts only
	      packets that were	matched	by the filter expression regardless of
	      whether  tcpdump	has  read and processed	them yet, and on other
	      OSes it counts only packets that	were  matched  by  the	filter
	      expression and were processed by tcpdump);

	      packets  ``dropped  by  kernel''	(this is the number of packets
	      that were	dropped, due to	a lack of buffer space,	by the	packet
	      capture  mechanism in the	OS on which tcpdump is running,	if the
	      OS reports that information to applications; if not, it will  be
	      reported as 0).

       On  platforms  that  support  the  SIGINFO  signal,  such  as most BSDs
       (including Mac OS X) and	 Digital/Tru64	UNIX,  it  will	 report	 those
       counts  when  it	 receives a SIGINFO signal (generated, for example, by
       typing your ``status'' character, typically control-T, although on some
       platforms,  such	 as  Mac  OS X,	the ``status'' character is not	set by
       default,	so you must set	it with	stty(1)	in order to use	it)  and  will
       continue	capturing packets.

       Reading packets from a network interface	may require that you have spe-
       cial privileges;	see the	pcap (3PCAP) man page for details.  Reading  a
       saved packet file doesn't require special privileges.

OPTIONS
       -A     Print each packet	(minus its link	level header) in ASCII.	 Handy
	      for capturing web	pages.

       -b     Print the	AS number in BGP packets in ASDOT notation rather than
	      ASPLAIN notation.

       -B     Set  the operating system	capture	buffer size to buffer_size, in
	      units of KiB (1024 bytes).

       -c     Exit after receiving count packets.

       -C     Before writing a raw packet to a	savefile,  check  whether  the
	      file  is	currently  larger than file_size and, if so, close the
	      current savefile and open	a new one.  Savefiles after the	 first
	      savefile	will  have the name specified with the -w flag,	with a
	      number after it, starting	at 1 and continuing upward.  The units
	      of  file_size  are  millions  of	bytes  (1,000,000  bytes,  not
	      1,048,576	bytes).

       -d     Dump the compiled	packet-matching	code in	a human	readable  form
	      to standard output and stop.

       -dd    Dump packet-matching code	as a C program fragment.

       -ddd   Dump  packet-matching  code  as decimal numbers (preceded	with a
	      count).

       -D     Print the	list of	the network interfaces available on the	system
	      and  on  which  tcpdump  can  capture packets.  For each network
	      interface, a number and an interface name, possibly followed  by
	      a	 text description of the interface, is printed.	 The interface
	      name or the number can be	supplied to the	-i flag	to specify  an
	      interface	on which to capture.

	      This  can	be useful on systems that don't	have a command to list
	      them (e.g., Windows systems, or UNIX  systems  lacking  ifconfig
	      -a); the number can be useful on Windows 2000 and	later systems,
	      where the	interface name is a somewhat complex string.

	      The -D flag will not be supported	if tcpdump was built  with  an
	      older version of libpcap that lacks the pcap_findalldevs() func-
	      tion.

       -e     Print the	link-level header on each  dump	 line.	 This  can  be
	      used,  for  example,  to print MAC layer addresses for protocols
	      such as Ethernet and IEEE	802.11.

       -E     Use spi@ipaddr algo:secret for decrypting	IPsec ESP packets that
	      are addressed to addr and	contain	Security Parameter Index value
	      spi. This	combination may	be repeated with comma or newline sep-
	      aration.

	      Note  that  setting the secret for IPv4 ESP packets is supported
	      at this time.

	      Algorithms may  be  des-cbc,  3des-cbc,  blowfish-cbc,  rc3-cbc,
	      cast128-cbc,  or	none.  The default is des-cbc.	The ability to
	      decrypt packets is only present if  tcpdump  was	compiled  with
	      cryptography enabled.

	      secret is	the ASCII text for ESP secret key.  If preceded	by 0x,
	      then a hex value will be read.

	      The option assumes RFC2406 ESP, not RFC1827 ESP.	The option  is
	      only  for	 debugging purposes, and the use of this option	with a
	      true `secret' key	is discouraged.	 By  presenting	 IPsec	secret
	      key  onto	 command line you make it visible to others, via ps(1)
	      and other	occasions.

	      In addition to the above syntax, the syntax  file	 name  may  be
	      used  to	have  tcpdump  read  the provided file in. The file is
	      opened upon receiving the	first ESP packet, so any special  per-
	      missions	that  tcpdump  may have	been given should already have
	      been given up.

       -f     Print `foreign' IPv4 addresses numerically rather	than  symboli-
	      cally  (this option is intended to get around serious brain dam-
	      age in Sun's NIS server -- usually it hangs forever  translating
	      non-local	internet numbers).

	      The  test	 for  `foreign'	 IPv4 addresses	is done	using the IPv4
	      address and netmask of the interface on which capture  is	 being
	      done.   If that address or netmask are not available, available,
	      either because the interface on which capture is being done  has
	      no  address  or  netmask or because the capture is being done on
	      the Linux	"any" interface, which can capture on  more  than  one
	      interface, this option will not work correctly.

       -F     Use  file	 as  input  for	 the filter expression.	 An additional
	      expression given on the command line is ignored.

       -G     If specified, rotates the	dump file specified with the -w	option
	      every  rotate_seconds  seconds.	Savefiles  will	 have the name
	      specified	by -w which should include a time format as defined by
	      strftime(3).  If no time format is specified, each new file will
	      overwrite	the previous.

	      If used in conjunction with the -C option, filenames  will  take
	      the form of `file<count>'.

       -h     Print  the  tcpdump  and	libpcap	version	strings, print a usage
	      message, and exit.

       -H     Attempt to detect	802.11s	draft mesh headers.

       -i     Listen on	interface.  If unspecified, tcpdump searches the  sys-
	      tem interface list for the lowest	numbered, configured up	inter-
	      face (excluding loopback).  Ties are broken by choosing the ear-
	      liest match.

	      On  Linux	 systems with 2.2 or later kernels, an interface argu-
	      ment of ``any'' can be used to capture packets from  all	inter-
	      faces.   Note  that  captures  on	the ``any'' device will	not be
	      done in promiscuous mode.

	      If the -D	flag is	supported, an interface	number as  printed  by
	      that flag	can be used as the interface argument.

       -I     Put  the	interface in "monitor mode"; this is supported only on
	      IEEE 802.11 Wi-Fi	interfaces, and	supported only on some operat-
	      ing systems.

	      Note  that  in  monitor mode the adapter might disassociate from
	      the network with which it's associated, so that you will not  be
	      able to use any wireless networks	with that adapter.  This could
	      prevent accessing	files on a network server, or  resolving  host
	      names or network addresses, if you are capturing in monitor mode
	      and are not connected to another network with another adapter.

	      This flag	will affect the	output of the -L flag.	 If  -I	 isn't
	      specified,  only	those  link-layer  types available when	not in
	      monitor mode will	be shown; if -I	is specified, only those link-
	      layer types available when in monitor mode will be shown.

       -j     Set  the	time  stamp  type for the capture to tstamp_type.  The
	      names to use for the time	stamp types are	given in  pcap-tstamp-
	      type(7);	not  all  the  types  listed there will	necessarily be
	      valid for	any given interface.

       -J     List the supported time stamp types for the interface and	 exit.
	      If  the time stamp type cannot be	set for	the interface, no time
	      stamp types are listed.

       -K     Don't attempt to verify IP, TCP, or UDP checksums.  This is use-
	      ful  for	interfaces  that perform some or all of	those checksum
	      calculation in hardware; otherwise, all outgoing	TCP  checksums
	      will be flagged as bad.

       -l     Make  stdout  line buffered.  Useful if you want to see the data
	      while capturing it.  E.g.,

		     tcpdump -l	| tee dat

	      or

		     tcpdump -l	> dat &	tail -f	dat

	      Note that	on Windows,``line buffered'' means ``unbuffered'',  so
	      that  WinDump  will  write  each character individually if -l is
	      specified.

	      -U is similar to -l in its behavior, but it will cause output to
	      be  ``packet-buffered'', so that the output is written to	stdout
	      at the end of each packet	rather than at the end of  each	 line;
	      this is buffered on all platforms, including Windows.

       -L     List  the	known data link	types for the interface, in the	speci-
	      fied mode, and exit.  The	list of	known data link	types  may  be
	      dependent	on the specified mode; for example, on some platforms,
	      a	Wi-Fi interface	might support one set of data link types  when
	      not  in  monitor	mode  (for example, it might support only fake
	      Ethernet headers,	or might support 802.11	headers	but  not  sup-
	      port  802.11  headers with radio information) and	another	set of
	      data link	types when in monitor mode (for	example, it might sup-
	      port  802.11  headers, or	802.11 headers with radio information,
	      only in monitor mode).

       -m     Load SMI MIB module definitions from file	module.	  This	option
	      can  be used several times to load several MIB modules into tcp-
	      dump.

       -M     Use secret as a shared secret for	validating the	digests	 found
	      in  TCP segments with the	TCP-MD5	option (RFC 2385), if present.

       -n     Don't convert addresses (i.e.,  host  addresses,	port  numbers,
	      etc.) to names.

       -N     Don't  print  domain name	qualification of host names.  E.g., if
	      you give this flag then tcpdump will print  ``nic''  instead  of
	      ``nic.ddn.mil''.

       -O     Do  not  run the packet-matching code optimizer.	This is	useful
	      only if you suspect a bug	in the optimizer.

       -p     Don't put	the interface into promiscuous mode.   Note  that  the
	      interface	 might	be  in promiscuous mode	for some other reason;
	      hence, `-p' cannot be used as an abbreviation  for  `ether  host
	      {local-hw-addr} or ether broadcast'.

       -q     Quick  (quiet?) output.  Print less protocol information so out-
	      put lines	are shorter.

       -R     Assume ESP/AH packets to be based	on old specification  (RFC1825
	      to  RFC1829).   If specified, tcpdump will not print replay pre-
	      vention field.  Since there is  no  protocol  version  field  in
	      ESP/AH  specification,  tcpdump  cannot  deduce  the  version of
	      ESP/AH protocol.

       -r     Read packets from	file (which was	created	with the  -w  option).
	      Standard input is	used if	file is	``-''.

       -S     Print absolute, rather than relative, TCP	sequence numbers.

       -s     Snarf  snaplen  bytes  of	 data from each	packet rather than the
	      default of 65535 bytes.  Packets truncated because of a  limited
	      snapshot	are  indicated	in the output with ``[|proto]'', where
	      proto is the name	of the protocol	level at which the  truncation
	      has  occurred.  Note that	taking larger snapshots	both increases
	      the amount of time it takes to process packets and, effectively,
	      decreases	 the amount of packet buffering.  This may cause pack-
	      ets to be	lost.  You should limit	snaplen	to the smallest	number
	      that will	capture	the protocol information you're	interested in.
	      Setting snaplen to 0 sets	it to the default of 65535, for	 back-
	      wards compatibility with recent older versions of	tcpdump.

       -T     Force  packets  selected	by  "expression" to be interpreted the
	      specified	type.  Currently known	types  are  aodv  (Ad-hoc  On-
	      demand  Distance	Vector	protocol), carp	(Common	Address	Redun-
	      dancy Protocol), cnfp (Cisco NetFlow protocol), radius (RADIUS),
	      rpc  (Remote Procedure Call), rtp	(Real-Time Applications	proto-
	      col), rtcp (Real-Time Applications control protocol), snmp (Sim-
	      ple  Network  Management	Protocol), tftp	(Trivial File Transfer
	      Protocol),  vat  (Visual	Audio  Tool),  wb  (distributed	 White
	      Board),  zmtp1 (ZeroMQ Message Transport Protocol	1.0) and vxlan
	      (Virtual eXtensible Local	Area Network).

       -t     Don't print a timestamp on each dump line.

       -tt    Print an unformatted timestamp on	each dump line.

       -ttt   Print a delta (micro-second resolution) between current and pre-
	      vious line on each dump line.

       -tttt  Print  a	timestamp  in default format proceeded by date on each
	      dump line.

       -ttttt Print a delta  (micro-second  resolution)	 between  current  and
	      first line on each dump line.

       -u     Print undecoded NFS handles.

       -U     If  the -w option	is not specified, make the printed packet out-
	      put ``packet-buffered''; i.e., as	the description	 of  the  con-
	      tents of each packet is printed, it will be written to the stan-
	      dard output, rather than,	when not writing to a terminal,	 being
	      written only when	the output buffer fills.

	      If  the -w option	is specified, make the saved raw packet	output
	      ``packet-buffered''; i.e., as each packet	is saved, it  will  be
	      written  to the output file, rather than being written only when
	      the output buffer	fills.

	      The -U flag will not be supported	if tcpdump was built  with  an
	      older  version of	libpcap	that lacks the pcap_dump_flush() func-
	      tion.

       -v     When parsing and printing, produce (slightly more) verbose  out-
	      put.   For  example,  the	 time  to  live, identification, total
	      length and options in an IP packet are  printed.	 Also  enables
	      additional  packet integrity checks such as verifying the	IP and
	      ICMP header checksum.

	      When writing to a	file with the -w option, report, every 10 sec-
	      onds, the	number of packets captured.

       -vv    Even  more  verbose  output.  For	example, additional fields are
	      printed from NFS	reply  packets,	 and  SMB  packets  are	 fully
	      decoded.

       -vvv   Even more	verbose	output.	 For example, telnet SB	... SE options
	      are printed in full.  With -X Telnet options are printed in  hex
	      as well.

       -V     Read  a  list  of	filenames from file. Standard input is used if
	      file is ``-''.

       -w     Write the	raw packets to file rather than	parsing	 and  printing
	      them  out.  They can later be printed with the -r	option.	 Stan-
	      dard output is used if file is ``-''.

	      This output will be buffered if written to a file	or pipe, so  a
	      program reading from the file or pipe may	not see	packets	for an
	      arbitrary	amount of time after they are received.	  Use  the  -U
	      flag  to	cause  packets	to  be	written	 as  soon  as they are
	      received.

	      The MIME type application/vnd.tcpdump.pcap has  been  registered
	      with  IANA  for pcap files. The filename extension .pcap appears
	      to be the	most commonly used along with .cap and	.dmp.  Tcpdump
	      itself  doesn't  check  the extension when reading capture files
	      and doesn't add an extension when	writing	them  (it  uses	 magic
	      numbers  in  the	file  header instead). However,	many operating
	      systems and applications will use	the extension if it is present
	      and adding one (e.g. .pcap) is recommended.

	      See pcap-savefile(5) for a description of	the file format.

       -W     Used in conjunction with the -C option, this will	limit the num-
	      ber of files created to the specified number,  and  begin	 over-
	      writing  files  from  the	 beginning, thus creating a 'rotating'
	      buffer.  In addition, it will name the files with	enough leading
	      0s to support the	maximum	number of files, allowing them to sort
	      correctly.

	      Used in conjunction with the -G option, this will	limit the num-
	      ber  of rotated dump files that get created, exiting with	status
	      0	when reaching the limit. If used with -C as well, the behavior
	      will result in cyclical files per	timeslice.

       -x     When  parsing  and printing, in addition to printing the headers
	      of each packet, print the	data of	each packet  (minus  its  link
	      level  header)  in  hex.	 The  smaller  of the entire packet or
	      snaplen bytes will be printed.  Note that	 this  is  the	entire
	      link-layer  packet, so for link layers that pad (e.g. Ethernet),
	      the padding bytes	will also be printed  when  the	 higher	 layer
	      packet is	shorter	than the required padding.

       -xx    When  parsing  and printing, in addition to printing the headers
	      of each packet, print the	data of	 each  packet,	including  its
	      link level header, in hex.

       -X     When  parsing  and printing, in addition to printing the headers
	      of each packet, print the	data of	each packet  (minus  its  link
	      level  header)  in  hex  and  ASCII.   This  is  very  handy for
	      analysing	new protocols.

       -XX    When parsing and printing, in addition to	printing  the  headers
	      of  each	packet,	 print	the data of each packet, including its
	      link level header, in hex	and ASCII.

       -y     Set the data  link  type	to  use	 while	capturing  packets  to
	      datalinktype.

       -z     Used  in	conjunction  with the -C or -G options,	this will make
	      tcpdump run " command file " where file is  the  savefile	 being
	      closed  after  each rotation. For	example, specifying -z gzip or
	      -z bzip2 will compress each savefile using gzip or bzip2.

	      Note that	tcpdump	will run the command in	parallel to  the  cap-
	      ture, using the lowest priority so that this doesn't disturb the
	      capture process.

	      And in case you would like to use	a command  that	 itself	 takes
	      flags  or	 different  arguments,	you  can  always write a shell
	      script that will take the	savefile name as  the  only  argument,
	      make  the	flags &	arguments arrangements and execute the command
	      that you want.

       -Z     If tcpdump is running as root, after opening the capture	device
	      or  input	savefile, but before opening any savefiles for output,
	      change the user ID to user and the group ID to the primary group
	      of user.

	      This behavior can	also be	enabled	by default at compile time.

	expression
	      selects  which  packets  will  be	 dumped.   If no expression is
	      given, all packets on the	net will be dumped.   Otherwise,  only
	      packets for which	expression is `true' will be dumped.

	      For the expression syntax, see pcap-filter(7).

	      Expression arguments can be passed to tcpdump as either a	single
	      argument or as multiple arguments, whichever is more convenient.
	      Generally, if the	expression contains Shell metacharacters, such
	      as backslashes used to escape protocol names, it	is  easier  to
	      pass  it	as a single, quoted argument rather than to escape the
	      Shell metacharacters.  Multiple arguments	are concatenated  with
	      spaces before being parsed.

EXAMPLES
       To print	all packets arriving at	or departing from sundown:
	      tcpdump host sundown

       To print	traffic	between	helios and either hot or ace:
	      tcpdump host helios and \( hot or	ace \)

       To print	all IP packets between ace and any host	except helios:
	      tcpdump ip host ace and not helios

       To print	all traffic between local hosts	and hosts at Berkeley:
	      tcpdump net ucb-ether

       To  print all ftp traffic through internet gateway snup:	(note that the
       expression is quoted to prevent the shell from  (mis-)interpreting  the
       parentheses):
	      tcpdump 'gateway snup and	(port ftp or ftp-data)'

       To  print traffic neither sourced from nor destined for local hosts (if
       you gateway to one other	net, this stuff	should never make it onto your
       local net).
	      tcpdump ip and not net localnet

       To  print  the  start and end packets (the SYN and FIN packets) of each
       TCP conversation	that involves a	non-local host.
	      tcpdump 'tcp[tcpflags] & (tcp-syn|tcp-fin) != 0 and not src and dst net localnet'

       To print	all IPv4 HTTP packets to and from port	80,  i.e.  print  only
       packets	that  contain  data, not, for example, SYN and FIN packets and
       ACK-only	packets.  (IPv6	is left	as an exercise for the reader.)
	      tcpdump 'tcp port	80 and (((ip[2:2] - ((ip[0]&0xf)<<2)) -	((tcp[12]&0xf0)>>2)) !=	0)'

       To print	IP packets longer than 576 bytes sent through gateway snup:
	      tcpdump 'gateway snup and	ip[2:2]	> 576'

       To print	IP broadcast or	multicast packets that were not	sent via  Eth-
       ernet broadcast or multicast:
	      tcpdump 'ether[0]	& 1 = 0	and ip[16] >= 224'

       To print	all ICMP packets that are not echo requests/replies (i.e., not
       ping packets):
	      tcpdump 'icmp[icmptype] != icmp-echo and icmp[icmptype] != icmp-echoreply'

OUTPUT FORMAT
       The output of tcpdump is	protocol dependent.   The  following  gives  a
       brief description and examples of most of the formats.

       Link Level Headers

       If  the '-e' option is given, the link level header is printed out.  On
       Ethernets, the source and destination addresses,	protocol,  and	packet
       length are printed.

       On  FDDI	 networks, the	'-e' option causes tcpdump to print the	`frame
       control'	field,	the source and destination addresses, and  the	packet
       length.	 (The  `frame control' field governs the interpretation	of the
       rest of the packet.  Normal packets (such as those containing IP	 data-
       grams)  are `async' packets, with a priority value between 0 and	7; for
       example,	`async4'.  Such	packets	are assumed to contain an 802.2	 Logi-
       cal  Link  Control (LLC)	packet;	the LLC	header is printed if it	is not
       an ISO datagram or a so-called SNAP packet.

       On Token	Ring networks, the '-e'	option causes  tcpdump	to  print  the
       `access control'	and `frame control' fields, the	source and destination
       addresses, and the packet length.  As on	 FDDI  networks,  packets  are
       assumed	to  contain  an	 LLC  packet.	Regardless of whether the '-e'
       option is specified or not, the source routing information  is  printed
       for source-routed packets.

       On  802.11 networks, the	'-e' option causes tcpdump to print the	`frame
       control'	fields,	all of the addresses in	the  802.11  header,  and  the
       packet  length.	As on FDDI networks, packets are assumed to contain an
       LLC packet.

       (N.B.: The following description	assumes	familiarity with the SLIP com-
       pression	algorithm described in RFC-1144.)

       On SLIP links, a	direction indicator (``I'' for inbound,	``O'' for out-
       bound), packet type, and	compression information	are printed out.   The
       packet  type is printed first.  The three types are ip, utcp, and ctcp.
       No further link information is printed for ip packets.  For  TCP	 pack-
       ets,  the  connection identifier	is printed following the type.	If the
       packet is compressed, its encoded header	is printed out.	  The  special
       cases are printed out as	*S+n and *SA+n,	where n	is the amount by which
       the sequence number (or sequence	number and ack)	has changed.  If it is
       not  a  special	case,  zero  or	more changes are printed.  A change is
       indicated by U (urgent pointer),	W (window), A (ack), S (sequence  num-
       ber), and I (packet ID),	followed by a delta (+n	or -n),	or a new value
       (=n).  Finally, the amount of data in the packet	and compressed	header
       length are printed.

       For  example,  the  following  line  shows  an  outbound	compressed TCP
       packet, with an implicit	connection identifier; the ack has changed  by
       6, the sequence number by 49, and the packet ID by 6; there are 3 bytes
       of data and 6 bytes of compressed header:
	      O	ctcp * A+6 S+49	I+6 3 (6)

       ARP/RARP	Packets

       Arp/rarp	output shows the type of request and its arguments.  The  for-
       mat  is	intended to be self explanatory.  Here is a short sample taken
       from the	start of an `rlogin' from host rtsg to host csam:
	      arp who-has csam tell rtsg
	      arp reply	csam is-at CSAM
       The first line says that	rtsg sent an arp packet	asking for the	Ether-
       net  address  of	 internet  host	 csam.	Csam replies with its Ethernet
       address (in this	example, Ethernet addresses are	in caps	 and  internet
       addresses in lower case).

       This would look less redundant if we had	done tcpdump -n:
	      arp who-has 128.3.254.6 tell 128.3.254.68
	      arp reply	128.3.254.6 is-at 02:07:01:00:01:c4

       If  we had done tcpdump -e, the fact that the first packet is broadcast
       and the second is point-to-point	would be visible:
	      RTSG Broadcast 0806  64: arp who-has csam	tell rtsg
	      CSAM RTSG	0806  64: arp reply csam is-at CSAM
       For the first packet this says the Ethernet source address is RTSG, the
       destination is the Ethernet broadcast address, the type field contained
       hex 0806	(type ETHER_ARP) and the total length was 64 bytes.

       TCP Packets

       (N.B.:The following description assumes familiarity with	the TCP	proto-
       col  described  in RFC-793.  If you are not familiar with the protocol,
       neither this description	nor tcpdump will be of much use	to you.)

       The general format of a tcp protocol line is:
	      src _ dst: flags data-seqno ack window urgent options
       Src and dst are the source and  destination  IP	addresses  and	ports.
       Flags  are  some	 combination of	S (SYN), F (FIN), P (PUSH), R (RST), U
       (URG), W	(ECN CWR), E (ECN-Echo)	or `.' (ACK), or `none'	 if  no	 flags
       are set.	 Data-seqno describes the portion of sequence space covered by
       the data	in this	packet (see example below).  Ack is sequence number of
       the  next data expected the other direction on this connection.	Window
       is the number of	bytes of receive  buffer  space	 available  the	 other
       direction  on this connection.  Urg indicates there is `urgent' data in
       the packet.  Options are	tcp options enclosed in	angle brackets	(e.g.,
       <mss 1024>).

       Src,  dst and flags are always present.	The other fields depend	on the
       contents	of the packet's	tcp protocol header and	 are  output  only  if
       appropriate.

       Here is the opening portion of an rlogin	from host rtsg to host csam.
	      rtsg.1023	> csam.login: S	768512:768512(0) win 4096 <mss 1024>
	      csam.login > rtsg.1023: S	947648:947648(0) ack 768513 win	4096 <mss 1024>
	      rtsg.1023	> csam.login: .	ack 1 win 4096
	      rtsg.1023	> csam.login: P	1:2(1) ack 1 win 4096
	      csam.login > rtsg.1023: .	ack 2 win 4096
	      rtsg.1023	> csam.login: P	2:21(19) ack 1 win 4096
	      csam.login > rtsg.1023: P	1:2(1) ack 21 win 4077
	      csam.login > rtsg.1023: P	2:3(1) ack 21 win 4077 urg 1
	      csam.login > rtsg.1023: P	3:4(1) ack 21 win 4077 urg 1
       The  first  line	 says that tcp port 1023 on rtsg sent a	packet to port
       login on	csam.  The S indicates that the	SYN flag was set.  The	packet
       sequence	 number	was 768512 and it contained no data.  (The notation is
       `first:last(nbytes)' which means	`sequence numbers first	up to but  not
       including  last	which  is  nbytes  bytes of user data'.)  There	was no
       piggy-backed ack, the available receive window was 4096 bytes and there
       was a max-segment-size option requesting	an mss of 1024 bytes.

       Csam  replies  with  a similar packet except it includes	a piggy-backed
       ack for rtsg's SYN.  Rtsg then acks csam's SYN.	The `.'	means the  ACK
       flag  was  set.	 The  packet  contained	 no  data  so there is no data
       sequence	number.	 Note that the ack sequence number is a	small  integer
       (1).   The  first time tcpdump sees a tcp `conversation', it prints the
       sequence	number from the	packet.	 On subsequent packets of the  conver-
       sation, the difference between the current packet's sequence number and
       this initial sequence number is printed.	 This means that sequence num-
       bers  after  the	first can be interpreted as relative byte positions in
       the conversation's data stream (with the	first data byte	each direction
       being  `1').   `-S'  will  override  this feature, causing the original
       sequence	numbers	to be output.

       On the 6th line,	rtsg sends csam	19 bytes of data (bytes	2  through  20
       in the rtsg -> csam side	of the conversation).  The PUSH	flag is	set in
       the packet.  On the 7th line, csam says it's received data sent by rtsg
       up  to but not including	byte 21.  Most of this data is apparently sit-
       ting in the socket buffer since csam's receive  window  has  gotten  19
       bytes  smaller.	 Csam  also  sends  one	 byte  of data to rtsg in this
       packet.	On the 8th and 9th lines, csam	sends  two  bytes  of  urgent,
       pushed data to rtsg.

       If  the	snapshot was small enough that tcpdump didn't capture the full
       TCP header, it interprets as much of the	header	as  it	can  and  then
       reports	``[|tcp]'' to indicate the remainder could not be interpreted.
       If the header contains a	bogus option (one with a length	that's	either
       too  small  or  beyond  the  end	 of the	header), tcpdump reports it as
       ``[bad opt]'' and does not interpret any	further	 options  (since  it's
       impossible  to  tell where they start).	If the header length indicates
       options are present but the IP datagram length is not long  enough  for
       the  options  to	 actually  be  there, tcpdump reports it as ``[bad hdr
       length]''.

       Capturing TCP packets with particular flag combinations (SYN-ACK,  URG-
       ACK, etc.)

       There are 8 bits	in the control bits section of the TCP header:

	      CWR | ECE	| URG |	ACK | PSH | RST	| SYN |	FIN

       Let's  assume  that we want to watch packets used in establishing a TCP
       connection.  Recall that	TCP uses a 3-way handshake  protocol  when  it
       initializes  a  new  connection;	the connection sequence	with regard to
       the TCP control bits is

	      1) Caller	sends SYN
	      2) Recipient responds with SYN, ACK
	      3) Caller	sends ACK

       Now we're interested in capturing packets that have only	 the  SYN  bit
       set  (Step  1).	Note that we don't want	packets	from step 2 (SYN-ACK),
       just a plain initial SYN.  What we need is a correct filter  expression
       for tcpdump.

       Recall the structure of a TCP header without options:

	0			     15				     31
       -----------------------------------------------------------------
       |	  source port	       |       destination port	       |
       -----------------------------------------------------------------
       |			sequence number			       |
       -----------------------------------------------------------------
       |		     acknowledgment number		       |
       -----------------------------------------------------------------
       |  HL   | rsvd  |C|E|U|A|P|R|S|F|	window size	       |
       -----------------------------------------------------------------
       |	 TCP checksum	       |       urgent pointer	       |
       -----------------------------------------------------------------

       A  TCP  header  usually	holds  20  octets  of data, unless options are
       present.	 The first line	of the graph contains octets 0 - 3, the	second
       line shows octets 4 - 7 etc.

       Starting	 to  count with	0, the relevant	TCP control bits are contained
       in octet	13:

	0	      7|	     15|	     23|	     31
       ----------------|---------------|---------------|----------------
       |  HL   | rsvd  |C|E|U|A|P|R|S|F|	window size	       |
       ----------------|---------------|---------------|----------------
       |	       |  13th octet   |	       |	       |

       Let's have a closer look	at octet no. 13:

		       |	       |
		       |---------------|
		       |C|E|U|A|P|R|S|F|
		       |---------------|
		       |7   5	3     0|

       These are the TCP control bits we are interested	in.  We	have  numbered
       the  bits  in  this octet from 0	to 7, right to left, so	the PSH	bit is
       bit number 3, while the URG bit is number 5.

       Recall that we want to capture packets with only	SYN  set.   Let's  see
       what happens to octet 13	if a TCP datagram arrives with the SYN bit set
       in its header:

		       |C|E|U|A|P|R|S|F|
		       |---------------|
		       |0 0 0 0	0 0 1 0|
		       |---------------|
		       |7 6 5 4	3 2 1 0|

       Looking at the control bits section we see that only bit	number 1 (SYN)
       is set.

       Assuming	 that  octet number 13 is an 8-bit unsigned integer in network
       byte order, the binary value of this octet is

	      00000010

       and its decimal representation is

	  7	6     5	    4	  3	2     1	    0
       0*2 + 0*2 + 0*2 + 0*2 + 0*2 + 0*2 + 1*2 + 0*2  =	 2

       We're almost done, because now we know that if only  SYN	 is  set,  the
       value  of the 13th octet	in the TCP header, when	interpreted as a 8-bit
       unsigned	integer	in network byte	order, must be exactly 2.

       This relationship can be	expressed as
	      tcp[13] == 2

       We can use this expression as the filter	for tcpdump in order to	 watch
       packets which have only SYN set:
	      tcpdump -i xl0 tcp[13] ==	2

       The expression says "let	the 13th octet of a TCP	datagram have the dec-
       imal value 2", which is exactly what we want.

       Now, let's assume that we need to capture SYN  packets,	but  we	 don't
       care  if	 ACK  or  any  other  TCP control bit is set at	the same time.
       Let's see what happens to octet 13 when a TCP datagram with SYN-ACK set
       arrives:

	    |C|E|U|A|P|R|S|F|
	    |---------------|
	    |0 0 0 1 0 0 1 0|
	    |---------------|
	    |7 6 5 4 3 2 1 0|

       Now  bits 1 and 4 are set in the	13th octet.  The binary	value of octet
       13 is

		   00010010

       which translates	to decimal

	  7	6     5	    4	  3	2     1	    0
       0*2 + 0*2 + 0*2 + 1*2 + 0*2 + 0*2 + 1*2 + 0*2   = 18

       Now we can't just use 'tcp[13] == 18' in	the tcpdump filter expression,
       because that would select only those packets that have SYN-ACK set, but
       not those with only SYN set.  Remember that we don't care if ACK	or any
       other control bit is set	as long	as SYN is set.

       In order	to achieve our goal, we	need to	logically AND the binary value
       of octet	13 with	some other value to preserve the  SYN  bit.   We  know
       that  we	 want  SYN  to	be set in any case, so we'll logically AND the
       value in	the 13th octet with the	binary value of	a SYN:

		 00010010 SYN-ACK	       00000010	SYN
	    AND	 00000010 (we want SYN)	  AND  00000010	(we want SYN)
		 --------		       --------
	    =	 00000010		  =    00000010

       We see that this	AND operation  delivers	 the  same  result  regardless
       whether ACK or another TCP control bit is set.  The decimal representa-
       tion of the AND value as	well as	the result  of	this  operation	 is  2
       (binary 00000010), so we	know that for packets with SYN set the follow-
       ing relation must hold true:

	      (	( value	of octet 13 ) AND ( 2 )	) == ( 2 )

       This points us to the tcpdump filter expression
		   tcpdump -i xl0 'tcp[13] & 2 == 2'

       Some offsets and	field values may be expressed as names rather than  as
       numeric values. For example tcp[13] may be replaced with	tcp[tcpflags].
       The following TCP flag field values are also available:	tcp-fin,  tcp-
       syn, tcp-rst, tcp-push, tcp-act,	tcp-urg.

       This can	be demonstrated	as:
		   tcpdump -i xl0 'tcp[tcpflags] & tcp-push != 0'

       Note that you should use	single quotes or a backslash in	the expression
       to hide the AND ('&') special character from the	shell.

       UDP Packets

       UDP format is illustrated by this rwho packet:
	      actinide.who > broadcast.who: udp	84
       This says that port who on host actinide	sent a udp  datagram  to  port
       who on host broadcast, the Internet broadcast address.  The packet con-
       tained 84 bytes of user data.

       Some UDP	services are recognized	(from the source or  destination  port
       number) and the higher level protocol information printed.  In particu-
       lar, Domain Name	service	requests (RFC-1034/1035)  and  Sun  RPC	 calls
       (RFC-1050) to NFS.

       UDP Name	Server Requests

       (N.B.:The  following  description  assumes  familiarity with the	Domain
       Service protocol	described in RFC-1035.	If you are not	familiar  with
       the  protocol,  the  following description will appear to be written in
       greek.)

       Name server requests are	formatted as
	      src _ dst: id op?	flags qtype qclass name	(len)
	      h2opolo.1538 > helios.domain: 3+ A? ucbvax.berkeley.edu. (37)
       Host h2opolo asked the domain server on helios for  an  address	record
       (qtype=A)  associated  with the name ucbvax.berkeley.edu.  The query id
       was `3'.	 The `+' indicates the recursion desired flag  was  set.   The
       query  length was 37 bytes, not including the UDP and IP	protocol head-
       ers.  The query operation was the normal	one, Query, so	the  op	 field
       was  omitted.   If  the	op  had	been anything else, it would have been
       printed between the `3' and the `+'.  Similarly,	 the  qclass  was  the
       normal  one,  C_IN,  and	 omitted.   Any	 other	qclass would have been
       printed immediately after the `A'.

       A few anomalies are checked and may result in extra fields enclosed  in
       square  brackets:   If a	query contains an answer, authority records or
       additional records section, ancount, nscount, or	arcount	are printed as
       `[na]', `[nn]' or  `[nau]' where	n is the appropriate count.  If	any of
       the response bits are set (AA, RA or rcode) or  any  of	the  `must  be
       zero' bits are set in bytes two and three, `[b2&3=x]' is	printed, where
       x is the	hex value of header bytes two and three.

       UDP Name	Server Responses

       Name server responses are formatted as
	      src _ dst:  id op	rcode flags a/n/au type	class data (len)
	      helios.domain > h2opolo.1538: 3 3/3/7 A 128.32.137.3 (273)
	      helios.domain > h2opolo.1537: 2 NXDomain*	0/1/0 (97)
       In the first example, helios responds to	query id 3 from	h2opolo	with 3
       answer  records,	 3  name server	records	and 7 additional records.  The
       first answer record is type  A  (address)  and  its  data  is  internet
       address	128.32.137.3.	The  total size	of the response	was 273	bytes,
       excluding UDP and IP headers.  The op (Query) and response code	(NoEr-
       ror) were omitted, as was the class (C_IN) of the A record.

       In  the second example, helios responds to query	2 with a response code
       of non-existent domain (NXDomain) with no answers, one name server  and
       no  authority records.  The `*' indicates that the authoritative	answer
       bit was set.  Since there were no answers, no type, class or data  were
       printed.

       Other  flag  characters that might appear are `-' (recursion available,
       RA, not set) and	`|' (truncated message,	TC, set).  If  the  `question'
       section doesn't contain exactly one entry, `[nq]' is printed.

       SMB/CIFS	decoding

       tcpdump now includes fairly extensive SMB/CIFS/NBT decoding for data on
       UDP/137,	UDP/138	and TCP/139.  Some primitive decoding of IPX and  Net-
       BEUI SMB	data is	also done.

       By  default  a fairly minimal decode is done, with a much more detailed
       decode done if -v is used.  Be warned that with -v a single SMB	packet
       may  take  up a page or more, so	only use -v if you really want all the
       gory details.

       For information on SMB packet formats and what all the fields mean  see
       www.cifs.org   or  the  pub/samba/specs/	 directory  on	your  favorite
       samba.org mirror	site.  The SMB patches were written by Andrew Tridgell
       (tridge@samba.org).

       NFS Requests and	Replies

       Sun NFS (Network	File System) requests and replies are printed as:
	      src.xid _	dst.nfs: len op	args
	      src.nfs _	dst.xid: reply stat len	op results
	      sushi.6709 > wrl.nfs: 112	readlink fh 21,24/10.73165
	      wrl.nfs >	sushi.6709: reply ok 40	readlink "../var"
	      sushi.201b > wrl.nfs:
		   144 lookup fh 9,74/4096.6878	"xcolors"
	      wrl.nfs >	sushi.201b:
		   reply ok 128	lookup fh 9,74/4134.3150
       In  the	first line, host sushi sends a transaction with	id 6709	to wrl
       (note that the number following the src host is a transaction  id,  not
       the  source port).  The request was 112 bytes, excluding	the UDP	and IP
       headers.	 The operation was a readlink (read  symbolic  link)  on  file
       handle (fh) 21,24/10.731657119.	(If one	is lucky, as in	this case, the
       file handle can be interpreted as a  major,minor	 device	 number	 pair,
       followed	 by the	inode number and generation number.)  Wrl replies `ok'
       with the	contents of the	link.

       In the third line, sushi	asks wrl  to  lookup  the  name	 `xcolors'  in
       directory  file	9,74/4096.6878.	 Note that the data printed depends on
       the operation type.  The	format is intended to be self  explanatory  if
       read in conjunction with	an NFS protocol	spec.

       If  the	-v (verbose) flag is given, additional information is printed.
       For example:
	      sushi.1372a > wrl.nfs:
		   148 read fh 21,11/12.195 8192 bytes @ 24576
	      wrl.nfs >	sushi.1372a:
		   reply ok 1472 read REG 100664 ids 417/0 sz 29388
       (-v also	prints the  IP	header	TTL,  ID,  length,  and	 fragmentation
       fields, which have been omitted from this example.)  In the first line,
       sushi asks wrl to read 8192 bytes from file 21,11/12.195, at byte  off-
       set  24576.   Wrl  replies `ok';	the packet shown on the	second line is
       the first fragment of the reply,	and hence is only 1472 bytes long (the
       other bytes will	follow in subsequent fragments,	but these fragments do
       not have	NFS or even UDP	headers	and so might not be printed, depending
       on  the filter expression used).	 Because the -v	flag is	given, some of
       the file	attributes (which are returned in addition to the  file	 data)
       are  printed:  the file type (``REG'', for regular file), the file mode
       (in octal), the uid and gid, and	the file size.

       If the -v flag is given more than once, even more details are  printed.

       Note  that  NFS requests	are very large and much	of the detail won't be
       printed unless snaplen is increased.  Try using `-s 192'	to  watch  NFS
       traffic.

       NFS  reply  packets  do	not  explicitly	 identify  the	RPC operation.
       Instead,	tcpdump	keeps track of ``recent'' requests, and	 matches  them
       to  the	replies	using the transaction ID.  If a	reply does not closely
       follow the corresponding	request, it might not be parsable.

       AFS Requests and	Replies

       Transarc	AFS (Andrew File System) requests and replies are printed as:

	      src.sport	_ dst.dport: rx	packet-type
	      src.sport	_ dst.dport: rx	packet-type service call call-name args
	      src.sport	_ dst.dport: rx	packet-type service reply call-name args
	      elvis.7001 > pike.afsfs:
		   rx data fs call rename old fid 536876964/1/1	".newsrc.new"
		   new fid 536876964/1/1 ".newsrc"
	      pike.afsfs > elvis.7001: rx data fs reply	rename
       In the first line, host elvis sends a RX	packet to pike.	 This was a RX
       data  packet to the fs (fileserver) service, and	is the start of	an RPC
       call.  The RPC call was a rename, with the old  directory  file	id  of
       536876964/1/1 and an old	filename of `.newsrc.new', and a new directory
       file id of 536876964/1/1	and a new filename  of	`.newsrc'.   The  host
       pike  responds  with a RPC reply	to the rename call (which was success-
       ful, because it was a data packet and not an abort packet).

       In general, all AFS RPCs	are decoded at least by	RPC call  name.	  Most
       AFS  RPCs  have	at least some of the arguments decoded (generally only
       the `interesting' arguments, for	some definition	of interesting).

       The format is intended to be self-describing, but it will probably  not
       be  useful  to people who are not familiar with the workings of AFS and
       RX.

       If the -v (verbose) flag	is given twice,	 acknowledgement  packets  and
       additional  header information is printed, such as the RX call ID, call
       number, sequence	number,	serial number, and the RX packet flags.

       If the -v flag is given twice, additional information is	printed,  such
       as  the	RX  call  ID, serial number, and the RX	packet flags.  The MTU
       negotiation information is also printed from RX ack packets.

       If the -v flag is given three times, the	security index and service  id
       are printed.

       Error  codes  are printed for abort packets, with the exception of Ubik
       beacon packets (because abort packets are used to signify  a  yes  vote
       for the Ubik protocol).

       Note  that  AFS requests	are very large and many	of the arguments won't
       be printed unless snaplen is increased.	Try using `-s  256'  to	 watch
       AFS traffic.

       AFS  reply  packets  do	not  explicitly	 identify  the	RPC operation.
       Instead,	tcpdump	keeps track of ``recent'' requests, and	 matches  them
       to  the	replies	using the call number and service ID.  If a reply does
       not closely follow the corresponding request, it	might not be parsable.

       KIP AppleTalk (DDP in UDP)

       AppleTalk DDP packets encapsulated in UDP datagrams are de-encapsulated
       and dumped as DDP packets (i.e.,	all the	UDP header information is dis-
       carded).	  The file /etc/atalk.names is used to translate AppleTalk net
       and node	numbers	to names.  Lines in this file have the form
	      number	name

	      1.254	     ether
	      16.1	icsd-net
	      1.254.110	ace
       The first two lines give	the names of AppleTalk	networks.   The	 third
       line  gives the name of a particular host (a host is distinguished from
       a net by	the 3rd	octet in the number -  a  net  number  must  have  two
       octets  and a host number must have three octets.)  The number and name
       should  be   separated	by   whitespace	  (blanks   or	 tabs).	   The
       /etc/atalk.names	 file  may contain blank lines or comment lines	(lines
       starting	with a `#').

       AppleTalk addresses are printed in the form
	      net.host.port

	      144.1.209.2 > icsd-net.112.220
	      office.2 > icsd-net.112.220
	      jssmag.149.235 > icsd-net.2
       (If the /etc/atalk.names	doesn't	exist or doesn't contain an entry  for
       some AppleTalk host/net number, addresses are printed in	numeric	form.)
       In the first example, NBP (DDP port 2) on net 144.1 node	209 is sending
       to  whatever is listening on port 220 of	net icsd node 112.  The	second
       line is the same	except the full	name  of  the  source  node  is	 known
       (`office').   The third line is a send from port	235 on net jssmag node
       149 to broadcast	on the icsd-net	NBP  port  (note  that	the  broadcast
       address (255) is	indicated by a net name	with no	host number - for this
       reason it's a good idea to keep node names and net  names  distinct  in
       /etc/atalk.names).

       NBP  (name  binding  protocol) and ATP (AppleTalk transaction protocol)
       packets have their contents interpreted.	 Other protocols just dump the
       protocol	name (or number	if no name is registered for the protocol) and
       packet size.

       NBP packets are formatted like the following examples:
	      icsd-net.112.220 > jssmag.2: nbp-lkup 190: "=:LaserWriter@*"
	      jssmag.209.2 > icsd-net.112.220: nbp-reply 190: "RM1140:LaserWriter@*" 250
	      techpit.2	> icsd-net.112.220: nbp-reply 190: "techpit:LaserWriter@*" 186
       The first line is a name	lookup request for laserwriters	 sent  by  net
       icsd  host  112 and broadcast on	net jssmag.  The nbp id	for the	lookup
       is 190.	The second line	shows a	reply for this request (note  that  it
       has  the	same id) from host jssmag.209 saying that it has a laserwriter
       resource	named "RM1140" registered on port  250.	  The  third  line  is
       another	reply  to the same request saying host techpit has laserwriter
       "techpit" registered on port 186.

       ATP packet formatting is	demonstrated by	the following example:
	      jssmag.209.165 > helios.132: atp-req  12266<0-7> 0xae030001
	      helios.132 > jssmag.209.165: atp-resp 12266:0 (512) 0xae040000
	      helios.132 > jssmag.209.165: atp-resp 12266:1 (512) 0xae040000
	      helios.132 > jssmag.209.165: atp-resp 12266:2 (512) 0xae040000
	      helios.132 > jssmag.209.165: atp-resp 12266:3 (512) 0xae040000
	      helios.132 > jssmag.209.165: atp-resp 12266:4 (512) 0xae040000
	      helios.132 > jssmag.209.165: atp-resp 12266:5 (512) 0xae040000
	      helios.132 > jssmag.209.165: atp-resp 12266:6 (512) 0xae040000
	      helios.132 > jssmag.209.165: atp-resp*12266:7 (512) 0xae040000
	      jssmag.209.165 > helios.132: atp-req  12266<3,5> 0xae030001
	      helios.132 > jssmag.209.165: atp-resp 12266:3 (512) 0xae040000
	      helios.132 > jssmag.209.165: atp-resp 12266:5 (512) 0xae040000
	      jssmag.209.165 > helios.132: atp-rel  12266<0-7> 0xae030001
	      jssmag.209.133 > helios.132: atp-req* 12267<0-7> 0xae030002
       Jssmag.209 initiates transaction	id 12266 with host helios by  request-
       ing  up	to  8 packets (the `<0-7>').  The hex number at	the end	of the
       line is the value of the	`userdata' field in the	request.

       Helios responds with 8 512-byte packets.	 The  `:digit'	following  the
       transaction  id gives the packet	sequence number	in the transaction and
       the number in parens is the amount of data in the packet, excluding the
       atp header.  The	`*' on packet 7	indicates that the EOM bit was set.

       Jssmag.209  then	 requests that packets 3 & 5 be	retransmitted.	Helios
       resends them then jssmag.209 releases the transaction.	Finally,  jss-
       mag.209	initiates  the next request.  The `*' on the request indicates
       that XO (`exactly once')	was not	set.

       IP Fragmentation

       Fragmented Internet datagrams are printed as
	      (frag id:size@offset+)
	      (frag id:size@offset)
       (The first form indicates there are more	fragments.  The	 second	 indi-
       cates this is the last fragment.)

       Id  is the fragment id.	Size is	the fragment size (in bytes) excluding
       the IP header.  Offset is this fragment's  offset  (in  bytes)  in  the
       original	datagram.

       The  fragment information is output for each fragment.  The first frag-
       ment contains the higher	level protocol header and  the	frag  info  is
       printed	after the protocol info.  Fragments after the first contain no
       higher level protocol header and	the frag info  is  printed  after  the
       source  and destination addresses.  For example,	here is	part of	an ftp
       from arizona.edu	to lbl-rtsg.arpa over a	CSNET connection that  doesn't
       appear to handle	576 byte datagrams:
	      arizona.ftp-data > rtsg.1170: . 1024:1332(308) ack 1 win 4096 (frag 595a:328@0+)
	      arizona >	rtsg: (frag 595a:204@328)
	      rtsg.1170	> arizona.ftp-data: . ack 1536 win 2560
       There are a couple of things to note here:  First, addresses in the 2nd
       line don't include port numbers.	 This  is  because  the	 TCP  protocol
       information  is	all in the first fragment and we have no idea what the
       port or sequence	numbers	are when we print the later  fragments.	  Sec-
       ond,  the  tcp  sequence	information in the first line is printed as if
       there were 308 bytes of user data when, in fact,	there  are  512	 bytes
       (308  in	the first frag and 204 in the second).	If you are looking for
       holes in	the sequence space or trying to	match up  acks	with  packets,
       this can	fool you.

       A  packet  with	the  IP	 don't fragment	flag is	marked with a trailing
       (DF).

       Timestamps

       By default, all output lines are	preceded by a  timestamp.   The	 time-
       stamp is	the current clock time in the form
	      hh:mm:ss.frac
       and  is	as accurate as the kernel's clock.  The	timestamp reflects the
       time the	kernel first saw the packet.  No attempt is  made  to  account
       for the time lag	between	when the Ethernet interface removed the	packet
       from the	wire and when the kernel serviced the `new packet'  interrupt.

SEE ALSO
       stty(1),	 pcap(3PCAP),  bpf(4),	nit(4P),  pcap-savefile(5),  pcap-fil-
       ter(7), pcap-tstamp-type(7)

	      http://www.iana.org/assignments/media-types/application/vnd.tcp-
	      dump.pcap

AUTHORS
       The original authors are:

       Van  Jacobson,  Craig  Leres  and  Steven  McCanne, all of the Lawrence
       Berkeley	National Laboratory, University	of California, Berkeley, CA.

       It is currently being maintained	by tcpdump.org.

       The current version is available	via http:

	      http://www.tcpdump.org/

       The original distribution is available via anonymous ftp:

	      ftp://ftp.ee.lbl.gov/old/tcpdump.tar.Z

       IPv6/IPsec support is added by WIDE/KAME	project.   This	 program  uses
       Eric Young's SSLeay library, under specific configurations.

BUGS
       Please  send problems, bugs, questions, desirable enhancements, patches
       etc. to:

	      tcpdump-workers@lists.tcpdump.org

       NIT doesn't let you watch your own outbound traffic, BPF	will.  We rec-
       ommend that you use the latter.

       On Linux	systems	with 2.0[.x] kernels:

	      packets on the loopback device will be seen twice;

	      packet filtering cannot be done in the kernel, so	that all pack-
	      ets must be copied from the kernel in order to  be  filtered  in
	      user mode;

	      all  of  a  packet, not just the part that's within the snapshot
	      length, will be copied from the kernel (the 2.0[.x] packet  cap-
	      ture  mechanism, if asked	to copy	only part of a packet to user-
	      land, will not report the	true length of the packet; this	 would
	      cause most IP packets to get an error from tcpdump);

	      capturing	on some	PPP devices won't work correctly.

       We recommend that you upgrade to	a 2.2 or later kernel.

       Some  attempt should be made to reassemble IP fragments or, at least to
       compute the right length	for the	higher level protocol.

       Name server inverse queries are not dumped correctly: the (empty) ques-
       tion  section  is printed rather	than real query	in the answer section.
       Some believe that inverse queries are themselves	a bug  and  prefer  to
       fix the program generating them rather than tcpdump.

       A  packet  trace	 that crosses a	daylight savings time change will give
       skewed time stamps (the time change is ignored).

       Filter expressions on fields other than those  in  Token	 Ring  headers
       will not	correctly handle source-routed Token Ring packets.

       Filter  expressions  on	fields other than those	in 802.11 headers will
       not correctly handle 802.11 data	packets	with both To DS	 and  From  DS
       set.

       ip6  proto  should  chase header	chain, but at this moment it does not.
       ip6 protochain is supplied for this behavior.

       Arithmetic expression against transport	layer  headers,	 like  tcp[0],
       does not	work against IPv6 packets.  It only looks at IPv4 packets.

				 12 July 2012			    TCPDUMP(1)

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLES | OUTPUT FORMAT | SEE ALSO | AUTHORS | BUGS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=tcpdump&sektion=1&manpath=FreeBSD+10.1-RELEASE>

home | help