Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
TAR(5)			  FreeBSD File Formats Manual			TAR(5)

NAME
     tar -- format of tape archive files

DESCRIPTION
     The tar archive format collects any number	of files, directories, and
     other file	system objects (symbolic links,	device nodes, etc.) into a
     single stream of bytes.  The format was originally	designed to be used
     with tape drives that operate with	fixed-size blocks, but is widely used
     as	a general packaging mechanism.

   General Format
     A tar archive consists of a series	of 512-byte records.  Each file	system
     object requires a header record which stores basic	metadata (pathname,
     owner, permissions, etc.) and zero	or more	records	containing any file
     data.  The	end of the archive is indicated	by two records consisting
     entirely of zero bytes.

     For compatibility with tape drives	that use fixed block sizes, programs
     that read or write	tar files always read or write a fixed number of
     records with each I/O operation.  These ``blocks''	are always a multiple
     of	the record size.  The most common block	size--and the maximum sup-
     ported by historic	implementations--is 10240 bytes	or 20 records.	(Note:
     the terms ``block'' and ``record''	here are not entirely standard;	this
     document follows the convention established by John Gilmore in document-
     ing pdtar.)

   Old-Style Archive Format
     The original tar archive format has been extended many times to include
     additional	information that various implementors found necessary.	This
     section describes the variant implemented by the tar command included in
     Version 7 AT&T UNIX, which	seems to be the	earliest widely-used version
     of	the tar	program.

     The header	record for an old-style	tar archive consists of	the following:

	   struct header_old_tar {
		   char	name[100];
		   char	mode[8];
		   char	uid[8];
		   char	gid[8];
		   char	size[12];
		   char	mtime[12];
		   char	checksum[8];
		   char	linkflag[1];
		   char	linkname[100];
		   char	pad[255];
	   };
     All unused	bytes in the header record are filled with nulls.

     name    Pathname, stored as a null-terminated string.  Early tar imple-
	     mentations	only stored regular files (including hardlinks to
	     those files).  One	common early convention	used a trailing	"/"
	     character to indicate a directory name, allowing directory	per-
	     missions and owner	information to be archived and restored.

     mode    File mode,	stored as an octal number in ASCII.

     uid, gid
	     User id and group id of owner, as octal numbers in	ASCII.

     size    Size of file, as octal number in ASCII.  For regular files	only,
	     this indicates the	amount of data that follows the	header.	 In
	     particular, this field was	ignored	by early tar implementations
	     when extracting hardlinks.	 Modern	writers	should always store a
	     zero length for hardlink entries.

     mtime   Modification time of file,	as an octal number in ASCII.  This
	     indicates the number of seconds since the start of	the epoch,
	     00:00:00 UTC January 1, 1970.  Note that negative values should
	     be	avoided	here, as they are handled inconsistently.

     checksum
	     Header checksum, stored as	an octal number	in ASCII.  To compute
	     the checksum, set the checksum field to all spaces, then sum all
	     bytes in the header using unsigned	arithmetic.  This field	should
	     be	stored as six octal digits followed by a null and a space
	     character.	 Note that many	early implementations of tar used
	     signed arithmetic for the checksum	field, which can cause inter-
	     operability problems when transferring archives between systems.
	     Modern robust readers compute the checksum	both ways and accept
	     the header	if either computation matches.

     linkflag, linkname
	     In	order to preserve hardlinks and	conserve tape, a file with
	     multiple links is only written to the archive the first time it
	     is	encountered.  The next time it is encountered, the linkflag is
	     set to an ASCII `1' and the linkname field	holds the first	name
	     under which this file appears.  (Note that	regular	files have a
	     null value	in the linkflag	field.)

     Early tar implementations varied in how they terminated these fields.
     The tar command in	Version	7 AT&T UNIX used the following conventions
     (this is also documented in early BSD manpages): the pathname must	be
     null-terminated; the mode,	uid, and gid fields must end in	a space	and a
     null byte;	the size and mtime fields must end in a	space; the checksum is
     terminated	by a null and a	space.	Early implementations filled the
     numeric fields with leading spaces.  This seems to	have been common prac-
     tice until	the IEEE Std 1003.1-1988 (``POSIX.1'') standard	was released.
     For best portability, modern implementations should fill the numeric
     fields with leading zeros.

   Pre-POSIX Archives
     An	early draft of IEEE Std	1003.1-1988 (``POSIX.1'') served as the	basis
     for John Gilmore's	pdtar program and many system implementations from the
     late 1980s	and early 1990s.  These	archives generally follow the POSIX
     ustar format described below with the following variations:
     +o	     The magic value is	``ustar	'' (note the following space).	The
	     version field contains a space character followed by a null.
     +o	     The numeric fields	are generally filled with leading spaces (not
	     leading zeros as recommended in the final standard).
     +o	     The prefix	field is often not used, limiting pathnames to the 100
	     characters	of old-style archives.

   POSIX ustar Archives
     IEEE Std 1003.1-1988 (``POSIX.1'')	defined	a standard tar file format to
     be	read and written by compliant implementations of tar(1).  This format
     is	often called the ``ustar'' format, after the magic value used in the
     header.  (The name	is an acronym for ``Unix Standard TAR''.)  It extends
     the historic format with new fields:

	   struct header_posix_ustar {
		   char	name[100];
		   char	mode[8];
		   char	uid[8];
		   char	gid[8];
		   char	size[12];
		   char	mtime[12];
		   char	checksum[8];
		   char	typeflag[1];
		   char	linkname[100];
		   char	magic[6];
		   char	version[2];
		   char	uname[32];
		   char	gname[32];
		   char	devmajor[8];
		   char	devminor[8];
		   char	prefix[155];
		   char	pad[12];
	   };

     typeflag
	     Type of entry.  POSIX extended the	earlier	linkflag field with
	     several new type values:
	     ``0''   Regular file.  NUL	should be treated as a synonym,	for
		     compatibility purposes.
	     ``1''   Hard link.
	     ``2''   Symbolic link.
	     ``3''   Character device node.
	     ``4''   Block device node.
	     ``5''   Directory.
	     ``6''   FIFO node.
	     ``7''   Reserved.
	     Other   A POSIX-compliant implementation must treat any unrecog-
		     nized typeflag value as a regular file.  In particular,
		     writers should ensure that	all entries have a valid file-
		     name so that they can be restored by readers that do not
		     support the corresponding extension.  Uppercase letters
		     "A" through "Z" are reserved for custom extensions.  Note
		     that sockets and whiteout entries are not archivable.
	     It	is worth noting	that the size field, in	particular, has	dif-
	     ferent meanings depending on the type.  For regular files,	of
	     course, it	indicates the amount of	data following the header.
	     For directories, it may be	used to	indicate the total size	of all
	     files in the directory, for use by	operating systems that pre-
	     allocate directory	space.	For all	other types, it	should be set
	     to	zero by	writers	and ignored by readers.

     magic   Contains the magic	value ``ustar''	followed by a NUL byte to
	     indicate that this	is a POSIX standard archive.  Full compliance
	     requires the uname	and gname fields be properly set.

     version
	     Version.  This should be ``00'' (two copies of the	ASCII digit
	     zero) for POSIX standard archives.

     uname, gname
	     User and group names, as null-terminated ASCII strings.  These
	     should be used in preference to the uid/gid values	when they are
	     set and the corresponding names exist on the system.

     devmajor, devminor
	     Major and minor numbers for character device or block device
	     entry.

     prefix  First part	of pathname.  If the pathname is too long to fit in
	     the 100 bytes provided by the standard format, it can be split at
	     any / character with the first portion going here.	 If the	prefix
	     field is not empty, the reader will prepend the prefix value and
	     a / character to the regular name field to	obtain the full	path-
	     name.

     Note that all unused bytes	must be	set to NUL.

     Field termination is specified slightly differently by POSIX than by pre-
     vious implementations.  The magic,	uname, and gname fields	must have a
     trailing NUL.  The	pathname, linkname, and	prefix fields must have	a
     trailing NUL unless they fill the entire field.  (In particular, it is
     possible to store a 256-character pathname	if it happens to have a	/ as
     the 156th character.)  POSIX requires numeric fields to be	zero-padded in
     the front,	and allows them	to be terminated with either space or NUL
     characters.

     Currently,	most tar implementations comply	with the ustar format, occa-
     sionally extending	it by adding new fields	to the blank area at the end
     of	the header record.

   Pax Interchange Format
     There are many attributes that cannot be portably stored in a POSIX ustar
     archive.  IEEE Std	1003.1-2001 (``POSIX.1'') defined a ``pax interchange
     format'' that uses	two new	types of entries to hold text-formatted	meta-
     data that applies to following entries.  Note that	a pax interchange for-
     mat archive is a ustar archive in every respect.  The new data is stored
     in	ustar-compatible archive entries that use the ``x'' or ``g'' typeflag.
     In	particular, older implementations that do not fully support these
     extensions	will extract the metadata into regular files, where the	meta-
     data can be examined as necessary.

     An	entry in a pax interchange format archive consists of one or two stan-
     dard ustar	entries, each with its own header and data.  The first
     optional entry stores the extended	attributes for the following entry.
     This optional first entry has an "x" typeflag and a size field that indi-
     cates the total size of the extended attributes.  The extended attributes
     themselves	are stored as a	series of text-format lines encoded in the
     portable UTF-8 encoding.  Each line consists of a decimal number, a
     space, a key string, an equals sign, a value string, and a	new line.  The
     decimal number indicates the length of the	entire line, including the
     initial length field and the trailing newline.  An	example	of such	a
     field is:
	   25 ctime=1084839148.1212\n
     Keys in all lowercase are standard	keys.  Vendors can add their own keys
     by	prefixing them with an all uppercase vendor name and a period.	Note
     that, unlike the historic header, numeric values are stored using deci-
     mal, not octal.  A	description of some common keys	follows:

     atime, ctime, mtime
	     File access, inode	change,	and modification times.	 These fields
	     can be negative or	include	a decimal point	and a fractional
	     value.

     uname, uid, gname,	gid
	     User name,	group name, and	numeric	UID and	GID values.  The user
	     name and group name stored	here are encoded in UTF8 and can thus
	     include non-ASCII characters.  The	UID and	GID fields can be of
	     arbitrary length.

     linkpath
	     The full path of the linked-to file.  Note	that this is encoded
	     in	UTF8 and can thus include non-ASCII characters.

     path    The full pathname of the entry.  Note that	this is	encoded	in
	     UTF8 and can thus include non-ASCII characters.

     realtime.*, security.*
	     These keys	are reserved and may be	used for future	standardiza-
	     tion.

     size    The size of the file.  Note that there is no length limit on this
	     field, allowing conforming	archives to store files	much larger
	     than the historic 8GB limit.

     SCHILY.*
	     Vendor-specific attributes	used by	Joerg Schilling's star imple-
	     mentation.

     SCHILY.acl.access,	SCHILY.acl.default
	     Stores the	access and default ACLs	as textual strings in a	format
	     that is an	extension of the format	specified by POSIX.1e draft
	     17.  In particular, each user or group access specification can
	     include a fourth colon-separated field with the numeric UID or
	     GID.  This	allows ACLs to be restored on systems that may not
	     have complete user	or group information available (such as	when
	     NIS/YP or LDAP services are temporarily unavailable).

     SCHILY.devminor, SCHILY.devmajor
	     The full minor and	major numbers for device nodes.

     SCHILY.fflags
	     The file flags.

     SCHILY.realsize
	     The full size of the file on disk.	 XXX explain? XXX

     SCHILY.dev, SCHILY.ino, SCHILY.nlinks
	     The device	number,	inode number, and link count for the entry.
	     In	particular, note that a	pax interchange	format archive using
	     Joerg Schilling's SCHILY.*	extensions can store all of the	data
	     from struct stat.

     LIBARCHIVE.xattr.namespace.key
	     Libarchive	stores POSIX.1e-style extended attributes using	keys
	     of	this form.  The	key value is URL-encoded: All non-ASCII	char-
	     acters and	the two	special	characters ``='' and ``%'' are encoded
	     as	``%'' followed by two uppercase	hexadecimal digits.  The value
	     of	this key is the	extended attribute value encoded in base 64.
	     XXX Detail	the base-64 format here	XXX

     VENDOR.*
	     XXX document other	vendor-specific	extensions XXX

     Any values	stored in an extended attribute	override the corresponding
     values in the regular tar header.	Note that compliant readers should
     ignore the	regular	fields when they are overridden.  This is important,
     as	existing archivers are known to	store non-compliant values in the
     standard header fields in this situation.	There are no limits on length
     for any of	these fields.  In particular, numeric fields can be arbitrar-
     ily large.	 All text fields are encoded in	UTF8.  Compliant writers
     should store only portable	7-bit ASCII characters in the standard ustar
     header and	use extended attributes	whenever a text	value contains non-
     ASCII characters.

     In	addition to the	x entry	described above, the pax interchange format
     also supports a g entry.  The g entry is identical	in format, but speci-
     fies attributes that serve	as defaults for	all subsequent archive
     entries.  The g entry is not widely used.

     Besides the new x and g entries, the pax interchange format has a few
     other minor variations from the earlier ustar format.  The	most troubling
     one is that hardlinks are permitted to have data following	them.  This
     allows readers to restore any hardlink to a file without having to	rewind
     the archive to find an earlier entry.  However, it	creates	complications
     for robust	readers, as it is no longer clear whether or not they should
     ignore the	size field for hardlink	entries.

   GNU Tar Archives
     The GNU tar program started with a	pre-POSIX format similar to that
     described earlier and has extended	it using several different mechanisms:
     It	added new fields to the	empty space in the header (some	of which was
     later used	by POSIX for conflicting purposes); it allowed the header to
     be	continued over multiple	records; and it	defined	new entries that mod-
     ify following entries (similar in principle to the	x entry	described
     above, but	each GNU special entry is single-purpose, unlike the general-
     purpose x entry).	As a result, GNU tar archives are not POSIX compati-
     ble, although more	lenient	POSIX-compliant	readers	can successfully
     extract most GNU tar archives.

	   struct header_gnu_tar {
		   char	name[100];
		   char	mode[8];
		   char	uid[8];
		   char	gid[8];
		   char	size[12];
		   char	mtime[12];
		   char	checksum[8];
		   char	typeflag[1];
		   char	linkname[100];
		   char	magic[6];
		   char	version[2];
		   char	uname[32];
		   char	gname[32];
		   char	devmajor[8];
		   char	devminor[8];
		   char	atime[12];
		   char	ctime[12];
		   char	offset[12];
		   char	longnames[4];
		   char	unused[1];
		   struct {
			   char	offset[12];
			   char	numbytes[12];
		   } sparse[4];
		   char	isextended[1];
		   char	realsize[12];
		   char	pad[17];
	   };

     typeflag
	     GNU tar uses the following	special	entry types, in	addition to
	     those defined by POSIX:

	     7	     GNU tar treats type "7" records identically to type "0"
		     records, except on	one obscure RTOS where they are	used
		     to	indicate the pre-allocation of a contiguous file on
		     disk.

	     D	     This indicates a directory	entry.	Unlike the POSIX-stan-
		     dard "5" typeflag,	the header is followed by data records
		     listing the names of files	in this	directory.  Each name
		     is	preceded by an ASCII "Y" if the	file is	stored in this
		     archive or	"N" if the file	is not stored in this archive.
		     Each name is terminated with a null, and an extra null
		     marks the end of the name list.  The purpose of this
		     entry is to support incremental backups; a	program
		     restoring from such an archive may	wish to	delete files
		     on	disk that did not exist	in the directory when the ar-
		     chive was made.

		     Note that the "D" typeflag	specifically violates POSIX,
		     which requires that unrecognized typeflags	be restored as
		     normal files.  In this case, restoring the	"D" entry as a
		     file could	interfere with subsequent creation of the
		     like-named	directory.

	     K	     The data for this entry is	a long linkname	for the	fol-
		     lowing regular entry.

	     L	     The data for this entry is	a long pathname	for the	fol-
		     lowing regular entry.

	     M	     This is a continuation of the last	file on	the previous
		     volume.  GNU multi-volume archives	guarantee that each
		     volume begins with	a valid	entry header.  To ensure this,
		     a file may	be split, with part stored at the end of one
		     volume, and part stored at	the beginning of the next vol-
		     ume.  The "M" typeflag indicates that this	entry contin-
		     ues an existing file.  Such entries can only occur	as the
		     first or second entry in an archive (the latter only if
		     the first entry is	a volume label).  The size field spec-
		     ifies the size of this entry.  The	offset field at	bytes
		     369-380 specifies the offset where	this file fragment
		     begins.  The realsize field specifies the total size of
		     the file (which must equal	size plus offset).  When
		     extracting, GNU tar checks	that the header	file name is
		     the one it	is expecting, that the header offset is	in the
		     correct sequence, and that	the sum	of offset and size is
		     equal to realsize.

	     N	     Type "N" records are no longer generated by GNU tar.
		     They contained a list of files to be renamed or symlinked
		     after extraction; this was	originally used	to support
		     long names.  The contents of this record are a text
		     description of the	operations to be done, in the form
		     ``Rename %s to %s\n'' or ``Symlink	%s to %s\n''; in
		     either case, both filenames are escaped using K&R C syn-
		     tax.  Due to security concerns, "N" records are now gen-
		     erally ignored when reading archives.

	     S	     This is a ``sparse'' regular file.	 Sparse	files are
		     stored as a series	of fragments.  The header contains a
		     list of fragment offset/length pairs.  If more than four
		     such entries are required,	the header is extended as nec-
		     essary with ``extra'' header extensions (an older format
		     that is no	longer used), or ``sparse'' extensions.

	     V	     The name field should be interpreted as a tape/volume
		     header name.  This	entry should generally be ignored on
		     extraction.

     magic   The magic field holds the five characters ``ustar'' followed by a
	     space.  Note that POSIX ustar archives have a trailing null.

     version
	     The version field holds a space character followed	by a null.
	     Note that POSIX ustar archives use	two copies of the ASCII	digit
	     ``0''.

     atime, ctime
	     The time the file was last	accessed and the time of last change
	     of	file information, stored in octal as with mtime.

     longnames
	     This field	is apparently no longer	used.

     Sparse offset / numbytes
	     Each such structure specifies a single fragment of	a sparse file.
	     The two fields store values as octal numbers.  The	fragments are
	     each padded to a multiple of 512 bytes in the archive.  On
	     extraction, the list of fragments is collected from the header
	     (including	any extension headers),	and the	data is	then read and
	     written to	the file at appropriate	offsets.

     isextended
	     If	this is	set to non-zero, the header will be followed by	addi-
	     tional ``sparse header'' records.	Each such record contains
	     information about as many as 21 additional	sparse blocks as shown
	     here:

		   struct gnu_sparse_header {
			   struct {
				   char	offset[12];
				   char	numbytes[12];
			   } sparse[21];
			   char	   isextended[1];
			   char	   padding[7];
		   };

     realsize
	     A binary representation of	the file's complete size, with a much
	     larger range than the POSIX file size.  In	particular, with M
	     type files, the current entry is only a portion of	the file.  In
	     that case,	the POSIX size field will indicate the size of this
	     entry; the	realsize field will indicate the total size of the
	     file.

   GNU tar pax archives
     GNU tar 1.14 (XXX check this XXX) and later will write pax	interchange
     format archives when you specify the --posix flag.	 This format uses cus-
     tom keywords to store sparse file information.  There have	been three
     iterations	of this	support, referred to as	``0.0'', ``0.1'', and ``1.0''.

     GNU.sparse.numblocks, GNU.sparse.offset, GNU.sparse.numbytes,
	     GNU.sparse.size
	     The ``0.0'' format	used an	initial	GNU.sparse.numblocks attribute
	     to	indicate the number of blocks in the file, a pair of
	     GNU.sparse.offset and GNU.sparse.numbytes to indicate the offset
	     and size of each block, and a single GNU.sparse.size to indicate
	     the full size of the file.	 This is not the same as the size in
	     the tar header because the	latter value does not include the size
	     of	any holes.  This format	required that the order	of attributes
	     be	preserved and relied on	readers	accepting multiple appearances
	     of	the same attribute names, which	is not officially permitted by
	     the standards.

     GNU.sparse.map
	     The ``0.1'' format	used a single attribute	that stored a comma-
	     separated list of decimal numbers.	 Each pair of numbers indi-
	     cated the offset and size,	respectively, of a block of data.
	     This does not work	well if	the archive is extracted by an
	     archiver that does	not recognize this extension, since many pax
	     implementations simply discard unrecognized attributes.

     GNU.sparse.major, GNU.sparse.minor, GNU.sparse.name, GNU.sparse.realsize
	     The ``1.0'' format	stores the sparse block	map in one or more
	     512-byte blocks prepended to the file data	in the entry body.
	     The pax attributes	indicate the existence of this map (via	the
	     GNU.sparse.major and GNU.sparse.minor fields) and the full	size
	     of	the file.  The GNU.sparse.name holds the true name of the
	     file.  To avoid confusion,	the name stored	in the regular tar
	     header is a modified name so that extraction errors will be
	     apparent to users.

   Solaris Tar
     XXX More Details Needed XXX

     Solaris tar (beginning with SunOS XXX 5.7 ?? XXX) supports	an
     ``extended'' format that is fundamentally similar to pax interchange for-
     mat, with the following differences:
     +o	     Extended attributes are stored in an entry	whose type is X, not
	     x,	as used	by pax interchange format.  The	detailed format	of
	     this entry	appears	to be the same as detailed above for the x
	     entry.
     +o	     An	additional A entry is used to store an ACL for the following
	     regular entry.  The body of this entry contains a seven-digit
	     octal number followed by a	zero byte, followed by the textual ACL
	     description.  The octal value is the number of ACL	entries	plus a
	     constant that indicates the ACL type: 01000000 for	POSIX.1e ACLs
	     and 03000000 for NFSv4 ACLs.

   AIX Tar
     XXX More details needed XXX

   Mac OS X Tar
     The tar distributed with Apple's Mac OS X stores most regular files as
     two separate entries in the tar archive.  The two entries have the	same
     name except that the first	one has	``._'' added to	the beginning of the
     name.  This first entry stores the	``resource fork'' with additional
     attributes	for the	file.  The Mac OS X CopyFile() API is used to separate
     a file on disk into separate resource and data streams and	to reassemble
     those separate streams when the file is restored to disk.

   Other Extensions
     One obvious extension to increase the size	of files is to eliminate the
     terminating characters from the various numeric fields.  For example, the
     standard only allows the size field to contain 11 octal digits, reserving
     the twelfth byte for a trailing NUL character.  Allowing 12 octal digits
     allows file sizes up to 64	GB.

     Another extension,	utilized by GNU	tar, star, and other newer tar imple-
     mentations, permits binary	numbers	in the standard	numeric	fields.	 This
     is	flagged	by setting the high bit	of the first byte.  This permits
     95-bit values for the length and time fields and 63-bit values for	the
     uid, gid, and device numbers.  GNU	tar supports this extension for	the
     length, mtime, ctime, and atime fields.  Joerg Schilling's	star program
     supports this extension for all numeric fields.  Note that	this extension
     is	largely	obsoleted by the extended attribute record provided by the pax
     interchange format.

     Another early GNU extension allowed base-64 values	rather than octal.
     This extension was	short-lived and	is no longer supported by any imple-
     mentation.

SEE ALSO
     ar(1), pax(1), tar(1)

STANDARDS
     The tar utility is	no longer a part of POSIX or the Single	Unix Standard.
     It	last appeared in Version 2 of the Single UNIX Specification
     (``SUSv2'').  It has been supplanted in subsequent	standards by pax(1).
     The ustar format is currently part	of the specification for the pax(1)
     utility.  The pax interchange file	format is new with IEEE	Std
     1003.1-2001 (``POSIX.1'').

HISTORY
     A tar command appeared in Seventh Edition Unix, which was released	in
     January, 1979.  It	replaced the tp	program	from Fourth Edition Unix which
     in	turn replaced the tap program from First Edition Unix.	John Gilmore's
     pdtar public-domain implementation	(circa 1987) was highly	influential
     and formed	the basis of GNU tar.  Joerg Shilling's	star archiver is
     another open-source (GPL) archiver	(originally developed circa 1985)
     which features complete support for pax interchange format.

FreeBSD	9.3			April 19, 2009			   FreeBSD 9.3

NAME | DESCRIPTION | SEE ALSO | STANDARDS | HISTORY

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=tar&sektion=5&manpath=FreeBSD+8.2-RELEASE>

home | help