Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
SYSTAT(1)               FreeBSD General Commands Manual              SYSTAT(1)

NAME
     systat -- display system statistics on a crt

SYNOPSIS
     systat [-display] [refresh-interval]

DESCRIPTION
     The systat utility displays various system statistics in a screen ori-
     ented fashion using the curses screen display library, ncurses(3).

     While systat is running the screen is usually divided into two windows
     (an exception is the vmstat display which uses the entire screen).  The
     upper window depicts the current system load average.  The information
     displayed in the lower window may vary, depending on user commands.  The
     last line on the screen is reserved for user input and error messages.

     By default systat displays the processes getting the largest percentage
     of the processor in the lower window.  Other displays show swap space
     usage, disk I/O statistics (a la iostat(8)), virtual memory statistics (a
     la vmstat(8)), network ``mbuf'' utilization, TCP/IP statistics, and net-
     work connections (a la netstat(1)).

     Input is interpreted at two different levels.  A ``global'' command
     interpreter processes all keyboard input.  If this command interpreter
     fails to recognize a command, the input line is passed to a per-display
     command interpreter.  This allows each display to have certain display-
     specific commands.

     Command line options:

     -display          The - flag expects display to be one of: icmp, icmp6,
                       iostat, ip, ip6, mbufs, netstat, pigs, swap, tcp, or
                       vmstat.  These displays can also be requested interac-
                       tively (without the ``-'') and are described in full
                       detail below.

     refresh-interval  The refresh-value specifies the screen refresh time
                       interval in seconds.

     Certain characters cause immediate action by systat.  These are

     ^L          Refresh the screen.

     ^G          Print the name of the current ``display'' being shown in the
                 lower window and the refresh interval.

     :           Move the cursor to the command line and interpret the input
                 line typed as a command.  While entering a command the cur-
                 rent character erase, word erase, and line kill characters
                 may be used.

     The following commands are interpreted by the ``global'' command inter-
     preter.

     help        Print the names of the available displays on the command
                 line.

     load        Print the load average over the past 1, 5, and 15 minutes on
                 the command line.

     stop        Stop refreshing the screen.

     [start] [number]
                 Start (continue) refreshing the screen.  If a second,
                 numeric, argument is provided it is interpreted as a refresh
                 interval (in seconds).  Supplying only a number will set the
                 refresh interval to this value.

     quit        Exit systat.  (This may be abbreviated to q.)

     The available displays are:

     pigs        Display, in the lower window, those processes resident in
                 main memory and getting the largest portion of the processor
                 (the default display).  When less than 100% of the processor
                 is scheduled to user processes, the remaining time is
                 accounted to the ``idle'' process.

     icmp        Display, in the lower window, statistics about messages
                 received and transmitted by the Internet Control Message Pro-
                 tocol (``ICMP'').  The left half of the screen displays
                 information about received packets, and the right half dis-
                 plays information regarding transmitted packets.

                 The icmp display understands two commands: mode and reset.
                 The mode command is used to select one of four display modes,
                 given as its argument:
                 rate:       show the rate of change of each value in packets
                             (the default) per second
                 delta:      show the rate of change of each value in packets
                             per refresh interval
                 since:      show the total change of each value since the
                             display was last reset
                 absolute:   show the absolute value of each statistic

                 The reset command resets the baseline for since mode.  The
                 mode command with no argument will display the current mode
                 in the command line.

     icmp6       This display is like the icmp display, but displays statis-
                 tics for IPv6 ICMP.

     ip          Otherwise identical to the icmp display, except that it dis-
                 plays IP and UDP statistics.

     ip6         Like the ip display, except that it displays IPv6 statics.
                 It does not display UDP statistics.

     tcp         Like icmp, but with TCP statistics.

     iostat      Display, in the lower window, statistics about processor use
                 and disk throughput.  Statistics on processor use appear as
                 bar graphs of the amount of time executing in user mode
                 (``user''), in user mode running low priority processes
                 (``nice''), in system mode (``system''), in interrupt mode
                 (``interrupt''), and idle (``idle'').  Statistics on disk
                 throughput show, for each drive, megabytes per second, aver-
                 age number of disk transactions per second, and average kilo-
                 bytes of data per transaction.  This information may be dis-
                 played as bar graphs or as rows of numbers which scroll down-
                 ward.  Bar graphs are shown by default.

                 The following commands are specific to the iostat display;
                 the minimum unambiguous prefix may be supplied.

                 numbers     Show the disk I/O statistics in numeric form.
                             Values are displayed in numeric columns which
                             scroll downward.
                 bars        Show the disk I/O statistics in bar graph form
                             (default).
                 kbpt        Toggle the display of kilobytes per transaction.
                             (the default is to not display kilobytes per
                             transaction).

     swap        Show information about swap space usage on all the swap areas
                 compiled into the kernel.  The first column is the device
                 name of the partition.  The next column is the total space
                 available in the partition.  The Used column indicates the
                 total blocks used so far; the graph shows the percentage of
                 space in use on each partition.  If there are more than one
                 swap partition in use, a total line is also shown.  Areas
                 known to the kernel, but not in use are shown as not avail-
                 able.

     mbufs       Display, in the lower window, the number of mbufs allocated
                 for particular uses, i.e. data, socket structures, etc.

     vmstat      Take over the entire display and show a (rather crowded) com-
                 pendium of statistics related to virtual memory usage,
                 process scheduling, device interrupts, system name transla-
                 tion cacheing, disk I/O etc.

                 The upper left quadrant of the screen shows the number of
                 users logged in and the load average over the last one, five,
                 and fifteen minute intervals.  Below this line are statistics
                 on memory utilization.  The first row of the table reports
                 memory usage only among active processes, that is processes
                 that have run in the previous twenty seconds.  The second row
                 reports on memory usage of all processes.  The first column
                 reports on the number of physical pages claimed by processes.
                 The second column reports the number of physical pages that
                 are devoted to read only text pages.  The third and fourth
                 columns report the same two figures for virtual pages, that
                 is the number of pages that would be needed if all processes
                 had all of their pages.  Finally the last column shows the
                 number of physical pages on the free list.

                 Below the memory display is a list of the average number of
                 processes (over the last refresh interval) that are runnable
                 (`r'), in page wait (`p'), in disk wait other than paging
                 (`d'), sleeping (`s'), and swapped out but desiring to run
                 (`w').  The row also shows the average number of context
                 switches (`Csw'), traps (`Trp'; includes page faults), system
                 calls (`Sys'), interrupts (`Int'), network software inter-
                 rupts (`Sof'), and page faults (`Flt').

                 Below the process queue length listing is a numerical listing
                 and a bar graph showing the amount of system (shown as `='),
                 interrupt (shown as `+'), user (shown as `>'), nice (shown as
                 `-'), and idle time (shown as ` ').

                 Below the process display are statistics on name transla-
                 tions.  It lists the number of names translated in the previ-
                 ous interval, the number and percentage of the translations
                 that were handled by the system wide name translation cache,
                 and the number and percentage of the translations that were
                 handled by the per process name translation cache.

                 At the bottom left is the disk usage display.  It reports the
                 number of kilobytes per transaction, transactions per second,
                 megabytes per second and the percentage of the time the disk
                 was busy averaged over the refresh period of the display (by
                 default, five seconds).  The system keeps statistics on most
                 every storage device.  In general, up to seven devices are
                 displayed.  The devices displayed by default are the first
                 devices in the kernel's device list.  See devstat(3) and
                 devstat(9) for details on the devstat system.

                 Under the date in the upper right hand quadrant are statis-
                 tics on paging and swapping activity.  The first two columns
                 report the average number of pages brought in and out per
                 second over the last refresh interval due to page faults and
                 the paging daemon.  The third and fourth columns report the
                 average number of pages brought in and out per second over
                 the last refresh interval due to swap requests initiated by
                 the scheduler.  The first row of the display shows the aver-
                 age number of disk transfers per second over the last refresh
                 interval; the second row of the display shows the average
                 number of pages transferred per second over the last refresh
                 interval.

                 Below the paging statistics is a column of lines regarding
                 the virtual memory system which list the average number of
                 pages copied on write (`cow'), pages zero filled on demand
                 (`zfod'), slow (on-the-fly) zero fills percentage (`%slo-z'),
                 pages wired down (`wire'), active pages (`act'), inactive
                 pages (`inact'), pages on the buffer cache queue (`cache'),
                 number of free pages (`free'), pages freed by the page daemon
                 (`daefr'), pages freed by exiting processes (`prcfr'), pages
                 reactivated from the free list (`react'), times the page dae-
                 mon was awakened (`pdwak'), pages analyzed by the page daemon
                 (`pdpgs'), and intransit blocking page faults (`intrn') per
                 second over the refresh interval.

                 At the bottom of this column are lines showing the amount of
                 memory, in kilobytes, used for the buffer cache (`buf'), the
                 number of dirty buffers in the buffer cache (`dirtybuf'),
                 desired maximum size of vnode cache (`desiredvnodes') (mostly
                 unused, except to size the name cache), number of vnodes
                 actually allocated (`numvnodes'), and number of allocated
                 vnodes that are free (`freevnodes').

                 Running down the right hand side of the display is a break-
                 down of the interrupts being handled by the system.  At the
                 top of the list is the total interrupts per second over the
                 time interval.  The rest of the column breaks down the total
                 on a device by device basis.  Only devices that have inter-
                 rupted at least once since boot time are shown.

                 The following commands are specific to the vmstat display;
                 the minimum unambiguous prefix may be supplied.

                 boot          Display cumulative statistics since the system
                               was booted.
                 run           Display statistics as a running total from the
                               point this command is given.
                 time          Display statistics averaged over the refresh
                               interval (the default).
                 want_fd       Toggle the display of fd devices in the disk
                               usage display.
                 zero          Reset running statistics to zero.

     netstat     Display, in the lower window, network connections.  By
                 default, network servers awaiting requests are not displayed.
                 Each address is displayed in the format ``host.port'', with
                 each shown symbolically, when possible.  It is possible to
                 have addresses displayed numerically, limit the display to a
                 set of ports, hosts, and/or protocols (the minimum unambigu-
                 ous prefix may be supplied):

                 all           Toggle the displaying of server processes
                               awaiting requests (this is the equivalent of
                               the -a flag to netstat(1)).
                 numbers       Display network addresses numerically.
                 names         Display network addresses symbolically.
                 proto protocol
                               Display only network connections using the
                               indicated protocol.  Supported protocols are
                               ``tcp'', ``udp'', and ``all''.
                 ignore [items]
                               Do not display information about connections
                               associated with the specified hosts or ports.
                               Hosts and ports may be specified by name
                               (``vangogh'', ``ftp''), or numerically.  Host
                               addresses use the Internet dot notation
                               (``128.32.0.9'').  Multiple items may be speci-
                               fied with a single command by separating them
                               with spaces.
                 display [items]
                               Display information about the connections asso-
                               ciated with the specified hosts or ports.  As
                               for ignore, [items] may be names or numbers.
                 show [ports|hosts]
                               Show, on the command line, the currently
                               selected protocols, hosts, and ports.  Hosts
                               and ports which are being ignored are prefixed
                               with a `!'.  If ports or hosts is supplied as
                               an argument to show, then only the requested
                               information will be displayed.
                 reset         Reset the port, host, and protocol matching
                               mechanisms to the default (any protocol, port,
                               or host).

     Commands to switch between displays may be abbreviated to the minimum
     unambiguous prefix; for example, ``io'' for ``iostat''.  Certain informa-
     tion may be discarded when the screen size is insufficient for display.
     For example, on a machine with 10 drives the iostat bar graph displays
     only 3 drives on a 24 line terminal.  When a bar graph would overflow the
     allotted screen space it is truncated and the actual value is printed
     ``over top'' of the bar.

     The following commands are common to each display which shows information
     about disk drives.  These commands are used to select a set of drives to
     report on, should your system have more drives configured than can nor-
     mally be displayed on the screen.

     ignore [drives]
                   Do not display information about the drives indicated.
                   Multiple drives may be specified, separated by spaces.
     display [drives]
                   Display information about the drives indicated.  Multiple
                   drives may be specified, separated by spaces.
     only [drives]
                   Display only the specified drives.  Multiple drives may be
                   specified, separated by spaces.
     drives        Display a list of available devices.
     match type,if,pass [| ...]
                   Display devices matching the given pattern.  The basic
                   matching expressions are the same as those used in
                   iostat(8) with one difference.  Instead of specifying mul-
                   tiple -t arguments which are then ORed together, the user
                   instead specifies multiple matching expressions joined by
                   the pipe (`|') character.  The comma separated arguments
                   within each matching expression are ANDed together, and
                   then the pipe separated matching expressions are ORed
                   together.  Any device matching the combined expression will
                   be displayed, if there is room to display it.  For example:

                         match da,scsi | cd,ide

                   This will display all SCSI Direct Access devices and all
                   IDE CDROM devices.

                         match da | sa | cd,pass

                   This will display all Direct Access devices, all Sequential
                   Access devices, and all passthrough devices that provide
                   access to CDROM drives.

SEE ALSO
     netstat(1), kvm(3), icmp(4), icmp6(4), ip(4), ip6(4), tcp(4), udp(4),
     iostat(8), vmstat(8)

FILES
     /kernel        For the namelist.
     /dev/kmem      For information in main memory.
     /etc/hosts     For host names.
     /etc/networks  For network names.
     /etc/services  For port names.

HISTORY
     The systat program appeared in 4.3BSD.  The icmp, ip, and tcp displays
     appeared in FreeBSD 3.0; the notion of having different display modes for
     the ICMP, IP, TCP, and UDP statistics was stolen from the -C option to
     netstat(1) in Silicon Graphics' IRIX system.

BUGS
     Certain displays presume a minimum of 80 characters per line.  The vmstat
     display looks out of place because it is (it was added in as a separate
     display rather than created as a new program).

FreeBSD 4.10                   September 9, 1997                  FreeBSD 4.10

NAME | SYNOPSIS | DESCRIPTION | SEE ALSO | FILES | HISTORY | BUGS

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=systat&sektion=1&manpath=FreeBSD+4.10-RELEASE>

home | help