Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
STTY(1)			FreeBSD	General	Commands Manual		       STTY(1)

NAME
     stty -- set the options for a terminal device interface

SYNOPSIS
     stty [-a |	-e | -g] [-f file] [arguments]

DESCRIPTION
     The stty utility sets or reports on terminal characteristics for the
     device that is its	standard input.	 If no options or arguments are	speci-
     fied, it reports the settings of a	subset of characteristics as well as
     additional	ones if	they differ from their default values.	Otherwise it
     modifies the terminal state according to the specified arguments.	Some
     combinations of arguments are mutually exclusive on some terminal types.

     The following options are available:

     -a	     Display all the current settings for the terminal to standard
	     output as per IEEE	Std 1003.2 (``POSIX.2'').

     -e	     Display all the current settings for the terminal to standard
	     output in the traditional BSD ``all'' and ``everything'' formats.

     -f	     Open and use the terminal named by	file rather than using stan-
	     dard input.  The file is opened using the O_NONBLOCK flag of
	     open(), making it possible	to set or display settings on a	termi-
	     nal that might otherwise block on the open.

     -g	     Display all the current settings for the terminal to standard
	     output in a form that may be used as an argument to a subsequent
	     invocation	of stty	to restore the current terminal	state as per
	     IEEE Std 1003.2 (``POSIX.2'').

     The following arguments are available to set the terminal characteris-
     tics:

   Control Modes:
     Control mode flags	affect hardware	characteristics	associated with	the
     terminal.	This corresponds to the	c_cflag	in the termios structure.

     parenb (-parenb)
		 Enable	(disable) parity generation and	detection.

     parodd (-parodd)
		 Select	odd (even) parity.

     cs5 cs6 cs7 cs8
		 Select	character size,	if possible.

     number	 Set terminal baud rate	to the number given, if	possible.  If
		 the baud rate is set to zero, modem control is	no longer
		 asserted.

     ispeed number
		 Set terminal input baud rate to the number given, if possi-
		 ble.  If the input baud rate is set to	zero, the input	baud
		 rate is set to	the value of the output	baud rate.

     ospeed number
		 Set terminal output baud rate to the number given, if possi-
		 ble.  If the output baud rate is set to zero, modem control
		 is no longer asserted.

     speed number
		 This sets both	ispeed and ospeed to number.

     hupcl (-hupcl)
		 Stop asserting	modem control (do not stop asserting modem
		 control) on last close.

     hup (-hup)	 Same as hupcl (-hupcl).

     cstopb (-cstopb)
		 Use two (one) stop bits per character.

     cread (-cread)
		 Enable	(disable) the receiver.

     clocal (-clocal)
		 Assume	a line without (with) modem control.

     crtscts (-crtscts)
		 Enable	(disable) RTS/CTS flow control.

   Input Modes:
     This corresponds to the c_iflag in	the termios structure.

     ignbrk (-ignbrk)
		 Ignore	(do not	ignore)	break on input.

     brkint (-brkint)
		 Signal	(do not	signal)	INTR on	break.

     ignpar (-ignpar)
		 Ignore	(do not	ignore)	characters with	parity errors.

     parmrk (-parmrk)
		 Mark (do not mark) characters with parity errors.

     inpck (-inpck)
		 Enable	(disable) input	parity checking.

     istrip (-istrip)
		 Strip (do not strip) input characters to seven	bits.

     inlcr (-inlcr)
		 Map (do not map) NL to	CR on input.

     igncr (-igncr)
		 Ignore	(do not	ignore)	CR on input.

     icrnl (-icrnl)
		 Map (do not map) CR to	NL on input.

     ixon (-ixon)
		 Enable	(disable) START/STOP output control.  Output from the
		 system	is stopped when	the system receives STOP and started
		 when the system receives START, or if ixany is	set, any char-
		 acter restarts	output.

     ixoff (-ixoff)
		 Request that the system send (not send) START/STOP characters
		 when the input	queue is nearly	empty/full.

     ixany (-ixany)
		 Allow any character (allow only START)	to restart output.

     imaxbel (-imaxbel)
		 The system imposes a limit of MAX_INPUT (currently 255) char-
		 acters	in the input queue.  If	imaxbel	is set and the input
		 queue limit has been reached, subsequent input	causes the
		 system	to send	an ASCII BEL character to the output queue
		 (the terminal beeps at	you).  Otherwise, if imaxbel is	unset
		 and the input queue is	full, the next input character causes
		 the entire input and output queues to be discarded.

   Output Modes:
     This corresponds to the c_oflag of	the termios structure.

     opost (-opost)
		 Post-process output (do not post-process output; ignore all
		 other output modes).

     onlcr (-onlcr)
		 Map (do not map) NL to	CR-NL on output.

     ocrnl (-ocrnl)
		 Map (do not map) CR to	NL on output.

     oxtabs (-oxtabs)
		 Expand	(do not	expand)	tabs to	spaces on output.

     onocr (-onocr)
		 Do not	(do) output CRs	at column zero.

     onlret (-onlret)
		 On the	terminal NL performs (does not perform)	the CR func-
		 tion.

   Local Modes:
     Local mode	flags (lflags) affect various and sundry characteristics of
     terminal processing.  Historically	the term "local" pertained to new job
     control features implemented by Jim Kulp on a Pdp 11/70 at	IIASA.	Later
     the driver	ran on the first VAX at	Evans Hall, UC Berkeley, where the job
     control details were greatly modified but the structure definitions and
     names remained essentially	unchanged.  The	second interpretation of the
     'l' in lflag is ``line discipline flag'' which corresponds	to the c_lflag
     of	the termios structure.

     isig (-isig)
		 Enable	(disable) the checking of characters against the spe-
		 cial control characters INTR, QUIT, and SUSP.

     icanon (-icanon)
		 Enable	(disable) canonical input (ERASE and KILL processing).

     iexten (-iexten)
		 Enable	(disable) any implementation defined special control
		 characters not	currently controlled by	icanon,	isig, or ixon.

     echo (-echo)
		 Echo back (do not echo	back) every character typed.

     echoe (-echoe)
		 The ERASE character shall (shall not) visually	erase the last
		 character in the current line from the	display, if possible.

     echok (-echok)
		 Echo (do not echo) NL after KILL character.

     echoke (-echoke)
		 The KILL character shall (shall not) visually erase the cur-
		 rent line from	the display, if	possible.

     echonl (-echonl)
		 Echo (do not echo) NL,	even if	echo is	disabled.

     echoctl (-echoctl)
		 If echoctl is set, echo control characters as ^X.  Otherwise
		 control characters echo as themselves.

     echoprt (-echoprt)
		 For printing terminals.  If set, echo erased characters back-
		 wards within ``\'' and	``/''.	Otherwise, disable this	fea-
		 ture.

     noflsh (-noflsh)
		 Disable (enable) flush	after INTR, QUIT, SUSP.

     tostop (-tostop)
		 Send (do not send) SIGTTOU for	background output.  This
		 causes	background jobs	to stop	if they	attempt	terminal out-
		 put.

     altwerase (-altwerase)
		 Use (do not use) an alternate word erase algorithm when pro-
		 cessing WERASE	characters.  This alternate algorithm consid-
		 ers sequences of alphanumeric/underscores as words.  It also
		 skips the first preceding character in	its classification (as
		 a convenience since the one preceding character could have
		 been erased with simply an ERASE character.)

     mdmbuf (-mdmbuf)
		 If set, flow control output based on condition	of Carrier
		 Detect.  Otherwise writes return an error if Carrier Detect
		 is low	(and Carrier is	not being ignored with the CLOCAL
		 flag.)

     flusho (-flusho)
		 Indicates output is (is not) being discarded.

     pendin (-pendin)
		 Indicates input is (is	not) pending after a switch from non-
		 canonical to canonical	mode and will be re-input when a read
		 becomes pending or more input arrives.

   Control Characters:
     control-character string
		 Set control-character to string.  If string is	a single char-
		 acter,	the control character is set to	that character.	 If
		 string	is the two character sequence "^-" or the string
		 "undef" the control character is disabled (i.e., set to
		 {_POSIX_VDISABLE}.)

		 Recognized control-characters:

		       control-
		       character    Subscript	 Description
		       _________    _________	 _______________
		       eof	    VEOF	 EOF character
		       eol	    VEOL	 EOL character
		       eol2	    VEOL2	 EOL2 character
		       erase	    VERASE	 ERASE character
		       erase2	    VERASE2	 ERASE2	character
		       werase	    VWERASE	 WERASE	character
		       intr	    VINTR	 INTR character
		       kill	    VKILL	 KILL character
		       quit	    VQUIT	 QUIT character
		       susp	    VSUSP	 SUSP character
		       start	    VSTART	 START character
		       stop	    VSTOP	 STOP character
		       dsusp	    VDSUSP	 DSUSP character
		       lnext	    VLNEXT	 LNEXT character
		       reprint	    VREPRINT	 REPRINT character
		       status	    VSTATUS	 STATUS	character

     min number

     time number
		 Set the value of min or time to number.  MIN and TIME are
		 used in Non-Canonical mode input processing (-icanon).

   Combination Modes:
     saved settings
		 Set the current terminal characteristics to the saved set-
		 tings produced	by the -g option.

     evenp or parity
		 Enable	parenb and cs7;	disable	parodd.

     oddp	 Enable	parenb,	cs7, and parodd.

     -parity, -evenp, -oddp
		 Disable parenb, and set cs8.

     nl	(-nl)	 Enable	(disable) icrnl.  In addition -nl unsets inlcr and
		 igncr.

     ek		 Reset ERASE, ERASE2, and KILL characters back to system
		 defaults.

     sane	 Resets	all modes to reasonable	values for interactive termi-
		 nal use.

     tty	 Set the line discipline to the	standard terminal line disci-
		 pline TTYDISC.

     crt (-crt)	 Set (disable) all modes suitable for a	CRT display device.

     kerninfo (-kerninfo)
		 Enable	(disable) the system generated status line associated
		 with processing a STATUS character (usually set to ^T).  The
		 status	line consists of the system load average, the current
		 command name, its process ID, the event the process is	wait-
		 ing on	(or the	status of the process),	the user and system
		 times,	percent	cpu, and current memory	usage.

     columns number
		 The terminal size is recorded as having number	columns.

     cols number
		 is an alias for columns.

     rows number
		 The terminal size is recorded as having number	rows.

     dec	 Set modes suitable for	users of Digital Equipment Corporation
		 systems (ERASE, KILL, and INTR	characters are set to ^?, ^U,
		 and ^C; ixany is disabled, and	crt is enabled.)

     extproc (-extproc)
		 If set, this flag indicates that some amount of terminal pro-
		 cessing is being performed by either the terminal hardware or
		 by the	remote side connected to a pty.

     raw (-raw)	 If set, change	the modes of the terminal so that no input or
		 output	processing is performed.  If unset, change the modes
		 of the	terminal to some reasonable state that performs	input
		 and output processing.	 Note that since the terminal driver
		 no longer has a single	RAW bit, it is not possible to intuit
		 what flags were set prior to setting raw.  This means that
		 unsetting raw may not put back	all the	setting	that were pre-
		 viously in effect.  To	set the	terminal into a	raw state and
		 then accurately restore it, the following shell code is rec-
		 ommended:

		 save_state=$(stty -g)
		 stty raw
		 ...
		 stty "$save_state"

     size	 The size of the terminal is printed as	two numbers on a sin-
		 gle line, first rows, then columns.

   Compatibility Modes:
     These modes remain	for compatibility with the previous version of the
     stty command.

     all	 Reports all the terminal modes	as with	stty -a	except that
		 the control characters	are printed in a columnar format.

     everything	 Same as all.

     cooked	 Same as sane.

     cbreak	 If set, enables brkint, ixon, imaxbel,	opost, isig, iexten,
		 and -icanon.  If unset, same as sane.

     new	 Same as tty.

     old	 Same as tty.

     newcrt (-newcrt)
		 Same as crt.

     pass8	 The converse of parity.

     tandem (-tandem)
		 Same as ixoff.

     decctlq (-decctlq)
		 The converse of ixany.

     crterase (-crterase)
		 Same as echoe.

     crtbs (-crtbs)
		 Same as echoe.

     crtkill (-crtkill)
		 Same as echoke.

     ctlecho (-ctlecho)
		 Same as echoctl.

     prterase (-prterase)
		 Same as echoprt.

     litout (-litout)
		 The converse of opost.

     tabs (-tabs)
		 The converse of oxtabs.

     brk value	 Same as the control character eol.

     flush value
		 Same as the control character discard.

     rprnt value
		 Same as the control character reprint.

EXIT STATUS
     The stty utility exits 0 on success, and >0 if an error occurs.

SEE ALSO
     termios(4)

STANDARDS
     The stty utility is expected to be	IEEE Std 1003.2	(``POSIX.2'') compati-
     ble.  The flags -e	and -f are extensions to the standard.

FreeBSD	10.1			April 18, 1994			  FreeBSD 10.1

NAME | SYNOPSIS | DESCRIPTION | EXIT STATUS | SEE ALSO | STANDARDS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=stty&sektion=1&manpath=FreeBSD+7.1-RELEASE>

home | help