Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
STG(4)		       FreeBSD Kernel Interfaces Manual			STG(4)

NAME
     stg -- driver for Future Domain based SCSI	controllers

SYNOPSIS
     To	compile	this driver into the kernel, place the following lines in your
     kernel configuration file:

	   device scbus
	   device stg

	   For one or more ISA cards:
	   device isa

	   In /boot/device.hints:
	   hint.stg.0.at="isa"

	   For one or more PCI cards:
	   device pci

     Alternatively, to load the	driver as a module at boot time, place the
     following line in loader.conf(5):

	   stg_load="YES"

DESCRIPTION
     The stg driver provides support for ISA, PCCARD and PCI controllers based
     on	Future Domain SCSI controller chips including the TMC-16C30, 16C50 and
     32C60.

HARDWARE
     Controllers supported by the stg driver include:

     +o	 Adaptec 2920/A
     +o	 Future	Domain SCSI2GO
     +o	 Future	Domain TMC-18XX/3260
     +o	 IBM SCSI PCMCIA Card
     +o	 ICM PSC-2401 SCSI
     +o	 MELCO IFC-SC
     +o	 RATOC REX-5536, REX-5536AM, REX-5536M,	REX-9836A

     Note that the Adaptec 2920C is supported by the ahc(4) driver.

SEE ALSO
     ahc(4), cd(4), ch(4), da(4), intro(4), sa(4), scsi(4)

HISTORY
     The stg device driver has been developed for NetBSD/pc98 and ported for
     FreeBSD.  It first	appeared in FreeBSD 2.2	with PAO and merged in
     FreeBSD 4.2.

AUTHORS
     The stg driver was	written	by Naofumi HONDA.

FreeBSD	10.1			August 8, 2004			  FreeBSD 10.1

NAME | SYNOPSIS | DESCRIPTION | HARDWARE | SEE ALSO | HISTORY | AUTHORS

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=stg&sektion=4&manpath=FreeBSD+6.3-RELEASE>

home | help