Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
SSH-KEYGEN(1)		FreeBSD	General	Commands Manual		 SSH-KEYGEN(1)

NAME
     ssh-keygen	-- authentication key generation, management and conversion

SYNOPSIS
     ssh-keygen	[-q] [-b bits] -t type [-N new_passphrase] [-C comment]
		[-f output_keyfile]
     ssh-keygen	-p [-P old_passphrase] [-N new_passphrase] [-f keyfile]
     ssh-keygen	-i [-f input_keyfile]
     ssh-keygen	-e [-f input_keyfile]
     ssh-keygen	-y [-f input_keyfile]
     ssh-keygen	-c [-P passphrase] [-C comment]	[-f keyfile]
     ssh-keygen	-l [-f input_keyfile]
     ssh-keygen	-B [-f input_keyfile]
     ssh-keygen	-D reader
     ssh-keygen	-U reader [-f input_keyfile]
     ssh-keygen	-r hostname [-f	input_keyfile] [-g]
     ssh-keygen	-G output_file [-v] [-b	bits] [-M memory] [-S start_point]
     ssh-keygen	-T output_file -f input_file [-v] [-a num_trials]
		[-W generator]

DESCRIPTION
     ssh-keygen	generates, manages and converts	authentication keys for
     ssh(1).  ssh-keygen can create RSA	keys for use by	SSH protocol version 1
     and RSA or	DSA keys for use by SSH	protocol version 2.  The type of key
     to	be generated is	specified with the -t option.

     ssh-keygen	is also	used to	generate groups	for use	in Diffie-Hellman
     group exchange (DH-GEX).  See the MODULI GENERATION section for details.

     Normally each user	wishing	to use SSH with	RSA or DSA authentication runs
     this once to create the authentication key	in $HOME/.ssh/identity,
     $HOME/.ssh/id_dsa or $HOME/.ssh/id_rsa.  Additionally, the	system admin-
     istrator may use this to generate host keys, as seen in /etc/rc.

     Normally this program generates the key and asks for a file in which to
     store the private key.  The public	key is stored in a file	with the same
     name but ``.pub'' appended.  The program also asks	for a passphrase.  The
     passphrase	may be empty to	indicate no passphrase (host keys must have an
     empty passphrase),	or it may be a string of arbitrary length.  A
     passphrase	is similar to a	password, except it can	be a phrase with a
     series of words, punctuation, numbers, whitespace,	or any string of char-
     acters you	want.  Good passphrases	are 10-30 characters long, are not
     simple sentences or otherwise easily guessable (English prose has only
     1-2 bits of entropy per character,	and provides very bad passphrases),
     and contain a mix of upper	and lowercase letters, numbers,	and non-
     alphanumeric characters.  The passphrase can be changed later by using
     the -p option.

     There is no way to	recover	a lost passphrase.  If the passphrase is lost
     or	forgotten, a new key must be generated and copied to the corresponding
     public key	to other machines.

     For RSA1 keys, there is also a comment field in the key file that is only
     for convenience to	the user to help identify the key.  The	comment	can
     tell what the key is for, or whatever is useful.  The comment is initial-
     ized to ``user@host'' when	the key	is created, but	can be changed using
     the -c option.

     After a key is generated, instructions below detail where the keys	should
     be	placed to be activated.

     The options are as	follows:

     -a	trials
	     Specifies the number of primality tests to	perform	when screening
	     DH-GEX candidates using the -T command.

     -b	bits
	     Specifies the number of bits in the key to	create.	 Minimum is
	     512 bits.	Generally, 1024	bits is	considered sufficient.	The
	     default is	1024 bits.

     -c	     Requests changing the comment in the private and public key
	     files.  This operation is only supported for RSA1 keys.  The pro-
	     gram will prompt for the file containing the private keys,	for
	     the passphrase if the key has one,	and for	the new	comment.

     -e	     This option will read a private or	public OpenSSH key file	and
	     print the key in a	`SECSH Public Key File Format' to stdout.
	     This option allows	exporting keys for use by several commercial
	     SSH implementations.

     -g	     Use generic DNS resource record format.

     -f	filename
	     Specifies the filename of the key file.

     -i	     This option will read an unencrypted private (or public) key file
	     in	SSH2-compatible	format and print an OpenSSH compatible private
	     (or public) key to	stdout.	 ssh-keygen also reads the `SECSH
	     Public Key	File Format'.  This option allows importing keys from
	     several commercial	SSH implementations.

     -l	     Show fingerprint of specified public key file.  Private RSA1 keys
	     are also supported.  For RSA and DSA keys ssh-keygen tries	to
	     find the matching public key file and prints its fingerprint.

     -p	     Requests changing the passphrase of a private key file instead of
	     creating a	new private key.  The program will prompt for the file
	     containing	the private key, for the old passphrase, and twice for
	     the new passphrase.

     -q	     Silence ssh-keygen.  Used by /etc/rc when creating	a new key.

     -y	     This option will read a private OpenSSH format file and print an
	     OpenSSH public key	to stdout.

     -t	type
	     Specifies the type	of the key to create.  The possible values are
	     ``rsa1'' for protocol version 1 and ``rsa'' or ``dsa'' for	proto-
	     col version 2.

     -B	     Show the bubblebabble digest of specified private or public key
	     file.

     -C	comment
	     Provides the new comment.

     -D	reader
	     Download the RSA public key stored	in the smartcard in reader.

     -G	output_file
	     Generate candidate	primes for DH-GEX.  These primes must be
	     screened for safety (using	the -T option) before use.

     -M	memory
	     Specify the amount	of memory to use (in megabytes)	when generat-
	     ing candidate moduli for DH-GEX.

     -N	new_passphrase
	     Provides the new passphrase.

     -P	passphrase
	     Provides the (old)	passphrase.

     -S	start
	     Specify start point (in hex) when generating candidate moduli for
	     DH-GEX.

     -T	output_file
	     Test DH group exchange candidate primes (generated	using the -G
	     option) for safety.

     -W	generator
	     Specify desired generator when testing candidate moduli for DH-
	     GEX.

     -U	reader
	     Upload an existing	RSA private key	into the smartcard in reader.

     -v	     Verbose mode.  Causes ssh-keygen to print debugging messages
	     about its progress.  This is helpful for debugging	moduli genera-
	     tion.  Multiple -v	options	increase the verbosity.	 The maximum
	     is	3.

     -r	hostname
	     Print DNS resource	record with the	specified hostname.

MODULI GENERATION
     ssh-keygen	may be used to generate	groups for the Diffie-Hellman Group
     Exchange (DH-GEX) protocol.  Generating these groups is a two-step
     process: first, candidate primes are generated using a fast, but memory
     intensive process.	 These candidate primes	are then tested	for suitabil-
     ity (a CPU-intensive process).

     Generation	of primes is performed using the -G option.  The desired
     length of the primes may be specified by the -b option.  For example:

	   ssh-keygen -G moduli-2048.candidates	-b 2048

     By	default, the search for	primes begins at a random point	in the desired
     length range.  This may be	overridden using the -S	option,	which speci-
     fies a different start point (in hex).

     Once a set	of candidates have been	generated, they	must be	tested for
     suitability.  This	may be performed using the -T option.  In this mode
     ssh-keygen	will read candidates from standard input (or a file specified
     using the -f option).  For	example:

	   ssh-keygen -T moduli-2048 -f	moduli-2048.candidates

     By	default, each candidate	will be	subjected to 100 primality tests.
     This may be overridden using the -a option.  The DH generator value will
     be	chosen automatically for the prime under consideration.	 If a specific
     generator is desired, it may be requested using the -W option.  Valid
     generator values are 2, 3 and 5.

     Screened DH groups	may be installed in /etc/moduli.  It is	important that
     this file contains	moduli of a range of bit lengths and that both ends of
     a connection share	common moduli.

FILES
     $HOME/.ssh/identity
	     Contains the protocol version 1 RSA authentication	identity of
	     the user.	This file should not be	readable by anyone but the
	     user.  It is possible to specify a	passphrase when	generating the
	     key; that passphrase will be used to encrypt the private part of
	     this file using 3DES.  This file is not automatically accessed by
	     ssh-keygen	but it is offered as the default file for the private
	     key.  ssh(1) will read this file when a login attempt is made.

     $HOME/.ssh/identity.pub
	     Contains the protocol version 1 RSA public	key for	authentica-
	     tion.  The	contents of this file should be	added to
	     $HOME/.ssh/authorized_keys	on all machines	where the user wishes
	     to	log in using RSA authentication.  There	is no need to keep the
	     contents of this file secret.

     $HOME/.ssh/id_dsa
	     Contains the protocol version 2 DSA authentication	identity of
	     the user.	This file should not be	readable by anyone but the
	     user.  It is possible to specify a	passphrase when	generating the
	     key; that passphrase will be used to encrypt the private part of
	     this file using 3DES.  This file is not automatically accessed by
	     ssh-keygen	but it is offered as the default file for the private
	     key.  ssh(1) will read this file when a login attempt is made.

     $HOME/.ssh/id_dsa.pub
	     Contains the protocol version 2 DSA public	key for	authentica-
	     tion.  The	contents of this file should be	added to
	     $HOME/.ssh/authorized_keys	on all machines	where the user wishes
	     to	log in using public key	authentication.	 There is no need to
	     keep the contents of this file secret.

     $HOME/.ssh/id_rsa
	     Contains the protocol version 2 RSA authentication	identity of
	     the user.	This file should not be	readable by anyone but the
	     user.  It is possible to specify a	passphrase when	generating the
	     key; that passphrase will be used to encrypt the private part of
	     this file using 3DES.  This file is not automatically accessed by
	     ssh-keygen	but it is offered as the default file for the private
	     key.  ssh(1) will read this file when a login attempt is made.

     $HOME/.ssh/id_rsa.pub
	     Contains the protocol version 2 RSA public	key for	authentica-
	     tion.  The	contents of this file should be	added to
	     $HOME/.ssh/authorized_keys	on all machines	where the user wishes
	     to	log in using public key	authentication.	 There is no need to
	     keep the contents of this file secret.

     /etc/moduli
	     Contains Diffie-Hellman groups used for DH-GEX.  The file format
	     is	described in moduli(5).

SEE ALSO
     ssh(1), ssh-add(1), ssh-agent(1), moduli(5), sshd(8)

     J.	Galbraith and R. Thayer, SECSH Public Key File Format, draft-ietf-
     secsh-publickeyfile-01.txt, March 2001, work in progress material.

AUTHORS
     OpenSSH is	a derivative of	the original and free ssh 1.2.12 release by
     Tatu Ylonen.  Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo
     de	Raadt and Dug Song removed many	bugs, re-added newer features and cre-
     ated OpenSSH.  Markus Friedl contributed the support for SSH protocol
     versions 1.5 and 2.0.

FreeBSD	9.2		      September	25, 1999		   FreeBSD 9.2

NAME | SYNOPSIS | DESCRIPTION | MODULI GENERATION | FILES | SEE ALSO | AUTHORS

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=ssh-keygen&sektion=1&manpath=FreeBSD+5.3-RELEASE>

home | help