Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
SSH(1)			FreeBSD	General	Commands Manual			SSH(1)

NAME
     ssh -- OpenSSH SSH	client (remote login program)

SYNOPSIS
     ssh [-1246AaCfgkNnqsTtVvXxY] [-b bind_address] [-c	cipher_spec] [-D port]
	 [-e escape_char] [-F configfile] [-i identity_file]
	 [-L port:host:hostport] [-l login_name] [-m mac_spec] [-o option]
	 [-p port] [-R port:host:hostport] [user@]hostname [command]

DESCRIPTION
     ssh (SSH client) is a program for logging into a remote machine and for
     executing commands	on a remote machine.  It is intended to	replace	rlogin
     and rsh, and provide secure encrypted communications between two
     untrusted hosts over an insecure network.	X11 connections	and arbitrary
     TCP/IP ports can also be forwarded	over the secure	channel.

     ssh connects and logs into	the specified hostname (with optional user
     name).  The user must prove his/her identity to the remote	machine	using
     one of several methods depending on the protocol version used.

     If	command	is specified, command is executed on the remote	host instead
     of	a login	shell.

   SSH protocol	version	1
     First, if the machine the user logs in from is listed in /etc/hosts.equiv
     or	/etc/ssh/shosts.equiv on the remote machine, and the user names	are
     the same on both sides, the user is immediately permitted to log in.
     Second, if	.rhosts	or .shosts exists in the user's	home directory on the
     remote machine and	contains a line	containing the name of the client
     machine and the name of the user on that machine, the user	is permitted
     to	log in.	 This form of authentication alone is normally not allowed by
     the server	because	it is not secure.

     The second	authentication method is the rhosts or hosts.equiv method com-
     bined with	RSA-based host authentication.	It means that if the login
     would be permitted	by $HOME/.rhosts, $HOME/.shosts, /etc/hosts.equiv, or
     /etc/ssh/shosts.equiv, and	if additionally	the server can verify the
     client's host key (see /etc/ssh/ssh_known_hosts and
     $HOME/.ssh/known_hosts in the FILES section), only	then is	login permit-
     ted.  This	authentication method closes security holes due	to IP spoof-
     ing, DNS spoofing and routing spoofing.  [Note to the administrator:
     /etc/hosts.equiv, $HOME/.rhosts, and the rlogin/rsh protocol in general,
     are inherently insecure and should	be disabled if security	is desired.]

     As	a third	authentication method, ssh supports RSA	based authentication.
     The scheme	is based on public-key cryptography: there are cryptosystems
     where encryption and decryption are done using separate keys, and it is
     not possible to derive the	decryption key from the	encryption key.	 RSA
     is	one such system.  The idea is that each	user creates a public/private
     key pair for authentication purposes.  The	server knows the public	key,
     and only the user knows the private key.

     The file $HOME/.ssh/authorized_keys lists the public keys that are	per-
     mitted for	logging	in.  When the user logs	in, the	ssh program tells the
     server which key pair it would like to use	for authentication.  The
     server checks if this key is permitted, and if so,	sends the user (actu-
     ally the ssh program running on behalf of the user) a challenge, a	random
     number, encrypted by the user's public key.  The challenge	can only be
     decrypted using the proper	private	key.  The user's client	then decrypts
     the challenge using the private key, proving that he/she knows the	pri-
     vate key but without disclosing it	to the server.

     ssh implements the	RSA authentication protocol automatically.  The	user
     creates his/her RSA key pair by running ssh-keygen(1).  This stores the
     private key in $HOME/.ssh/identity	and stores the public key in
     $HOME/.ssh/identity.pub in	the user's home	directory.  The	user should
     then copy the identity.pub	to $HOME/.ssh/authorized_keys in his/her home
     directory on the remote machine (the authorized_keys file corresponds to
     the conventional $HOME/.rhosts file, and has one key per line, though the
     lines can be very long).  After this, the user can	log in without giving
     the password.  RSA	authentication is much more secure than	rhosts authen-
     tication.

     The most convenient way to	use RSA	authentication may be with an authen-
     tication agent.  See ssh-agent(1) for more	information.

     If	other authentication methods fail, ssh prompts the user	for a pass-
     word.  The	password is sent to the	remote host for	checking; however,
     since all communications are encrypted, the password cannot be seen by
     someone listening on the network.

   SSH protocol	version	2
     When a user connects using	protocol version 2, similar authentication
     methods are available.  Using the default values for
     PreferredAuthentications, the client will try to authenticate first using
     the hostbased method; if this method fails, public	key authentication is
     attempted,	and finally if this method fails, keyboard-interactive and
     password authentication are tried.

     The public	key method is similar to RSA authentication described in the
     previous section and allows the RSA or DSA	algorithm to be	used: The
     client uses his private key, $HOME/.ssh/id_dsa or $HOME/.ssh/id_rsa, to
     sign the session identifier and sends the result to the server.  The
     server checks whether the matching	public key is listed in
     $HOME/.ssh/authorized_keys	and grants access if both the key is found and
     the signature is correct.	The session identifier is derived from a
     shared Diffie-Hellman value and is	only known to the client and the
     server.

     If	public key authentication fails	or is not available, a password	can be
     sent encrypted to the remote host to prove	the user's identity.

     Additionally, ssh supports	hostbased or challenge response	authentica-
     tion.

     Protocol 2	provides additional mechanisms for confidentiality (the	traf-
     fic is encrypted using 3DES, Blowfish, CAST128 or Arcfour)	and integrity
     (hmac-md5,	hmac-sha1).  Note that protocol	1 lacks	a strong mechanism for
     ensuring the integrity of the connection.

   Login session and remote execution
     When the user's identity has been accepted	by the server, the server
     either executes the given command,	or logs	into the machine and gives the
     user a normal shell on the	remote machine.	 All communication with	the
     remote command or shell will be automatically encrypted.

     If	a pseudo-terminal has been allocated (normal login session), the user
     may use the escape	characters noted below.

     If	no pseudo-tty has been allocated, the session is transparent and can
     be	used to	reliably transfer binary data.	On most	systems, setting the
     escape character to ``none'' will also make the session transparent even
     if	a tty is used.

     The session terminates when the command or	shell on the remote machine
     exits and all X11 and TCP/IP connections have been	closed.	 The exit sta-
     tus of the	remote program is returned as the exit status of ssh.

   Escape Characters
     When a pseudo-terminal has	been requested,	ssh supports a number of func-
     tions through the use of an escape	character.

     A single tilde character can be sent as ~~	or by following	the tilde by a
     character other than those	described below.  The escape character must
     always follow a newline to	be interpreted as special.  The	escape charac-
     ter can be	changed	in configuration files using the EscapeChar configura-
     tion directive or on the command line by the -e option.

     The supported escapes (assuming the default `~') are:

     ~.	     Disconnect.

     ~^Z     Background	ssh.

     ~#	     List forwarded connections.

     ~&	     Background	ssh at logout when waiting for forwarded connection /
	     X11 sessions to terminate.

     ~?	     Display a list of escape characters.

     ~B	     Send a BREAK to the remote	system (only useful for	SSH protocol
	     version 2 and if the peer supports	it).

     ~C	     Open command line (only useful for	adding port forwardings	using
	     the -L and	-R options).

     ~R	     Request rekeying of the connection	(only useful for SSH protocol
	     version 2 and if the peer supports	it).

   X11 and TCP forwarding
     If	the ForwardX11 variable	is set to ``yes'' (or see the description of
     the -X and	-x options described later) and	the user is using X11 (the
     DISPLAY environment variable is set), the connection to the X11 display
     is	automatically forwarded	to the remote side in such a way that any X11
     programs started from the shell (or command) will go through the
     encrypted channel,	and the	connection to the real X server	will be	made
     from the local machine.  The user should not manually set DISPLAY.	 For-
     warding of	X11 connections	can be configured on the command line or in
     configuration files.  Take	note that X11 forwarding can represent a secu-
     rity hazard.

     The DISPLAY value set by ssh will point to	the server machine, but	with a
     display number greater than zero.	This is	normal,	and happens because
     ssh creates a ``proxy'' X server on the server machine for	forwarding the
     connections over the encrypted channel.

     ssh will also automatically set up	Xauthority data	on the server machine.
     For this purpose, it will generate	a random authorization cookie, store
     it	in Xauthority on the server, and verify	that any forwarded connections
     carry this	cookie and replace it by the real cookie when the connection
     is	opened.	 The real authentication cookie	is never sent to the server
     machine (and no cookies are sent in the plain).

     If	the ForwardAgent variable is set to ``yes'' (or	see the	description of
     the -A and	-a options described later) and	the user is using an authenti-
     cation agent, the connection to the agent is automatically	forwarded to
     the remote	side.

     Forwarding	of arbitrary TCP/IP connections	over the secure	channel	can be
     specified either on the command line or in	a configuration	file.  One
     possible application of TCP/IP forwarding is a secure connection to an
     electronic	purse; another is going	through	firewalls.

   Server authentication
     ssh automatically maintains and checks a database containing identifica-
     tions for all hosts it has	ever been used with.  Host keys	are stored in
     $HOME/.ssh/known_hosts in the user's home directory.  Additionally, the
     file /etc/ssh/ssh_known_hosts is automatically checked for	known hosts.
     Any new hosts are automatically added to the user's file.	If a host's
     identification ever changes, ssh warns about this and disables password
     authentication to prevent a trojan	horse from getting the user's pass-
     word.  Another purpose of this mechanism is to prevent man-in-the-middle
     attacks which could otherwise be used to circumvent the encryption.  The
     StrictHostKeyChecking option can be used to prevent logins	to machines
     whose host	key is not known or has	changed.

     The options are as	follows:

     -1	     Forces ssh	to try protocol	version	1 only.

     -2	     Forces ssh	to try protocol	version	2 only.

     -4	     Forces ssh	to use IPv4 addresses only.

     -6	     Forces ssh	to use IPv6 addresses only.

     -A	     Enables forwarding	of the authentication agent connection.	 This
	     can also be specified on a	per-host basis in a configuration
	     file.

	     Agent forwarding should be	enabled	with caution.  Users with the
	     ability to	bypass file permissions	on the remote host (for	the
	     agent's Unix-domain socket) can access the	local agent through
	     the forwarded connection.	An attacker cannot obtain key material
	     from the agent, however they can perform operations on the	keys
	     that enable them to authenticate using the	identities loaded into
	     the agent.

     -a	     Disables forwarding of the	authentication agent connection.

     -b	bind_address
	     Specify the interface to transmit from on machines	with multiple
	     interfaces	or aliased addresses.

     -C	     Requests compression of all data (including stdin,	stdout,
	     stderr, and data for forwarded X11	and TCP/IP connections).  The
	     compression algorithm is the same used by gzip(1),	and the
	     ``level'' can be controlled by the	CompressionLevel option	for
	     protocol version 1.  Compression is desirable on modem lines and
	     other slow	connections, but will only slow	down things on fast
	     networks.	The default value can be set on	a host-by-host basis
	     in	the configuration files; see the Compression option.

     -c	blowfish | 3des	| des
	     Selects the cipher	to use for encrypting the session.  3des is
	     used by default.  It is believed to be secure.  3des (triple-des)
	     is	an encrypt-decrypt-encrypt triple with three different keys.
	     blowfish is a fast	block cipher; it appears very secure and is
	     much faster than 3des.  des is only supported in the ssh client
	     for interoperability with legacy protocol 1 implementations that
	     do	not support the	3des cipher.  Its use is strongly discouraged
	     due to cryptographic weaknesses.

     -c	cipher_spec
	     Additionally, for protocol	version	2 a comma-separated list of
	     ciphers can be specified in order of preference.  See Ciphers for
	     more information.

     -D	port
	     Specifies a local ``dynamic'' application-level port forwarding.
	     This works	by allocating a	socket to listen to port on the	local
	     side, and whenever	a connection is	made to	this port, the connec-
	     tion is forwarded over the	secure channel,	and the	application
	     protocol is then used to determine	where to connect to from the
	     remote machine.  Currently	the SOCKS4 and SOCKS5 protocols	are
	     supported,	and ssh	will act as a SOCKS server.  Only root can
	     forward privileged	ports.	Dynamic	port forwardings can also be
	     specified in the configuration file.

     -e	ch | ^ch | none
	     Sets the escape character for sessions with a pty (default: `~').
	     The escape	character is only recognized at	the beginning of a
	     line.  The	escape character followed by a dot (`.') closes	the
	     connection; followed by control-Z suspends	the connection;	and
	     followed by itself	sends the escape character once.  Setting the
	     character to ``none'' disables any	escapes	and makes the session
	     fully transparent.

     -F	configfile
	     Specifies an alternative per-user configuration file.  If a con-
	     figuration	file is	given on the command line, the system-wide
	     configuration file	(/etc/ssh/ssh_config) will be ignored.	The
	     default for the per-user configuration file is $HOME/.ssh/config.

     -f	     Requests ssh to go	to background just before command execution.
	     This is useful if ssh is going to ask for passwords or
	     passphrases, but the user wants it	in the background.  This
	     implies -n.  The recommended way to start X11 programs at a
	     remote site is with something like	ssh -f host xterm.

     -g	     Allows remote hosts to connect to local forwarded ports.

     -I	smartcard_device
	     Specifies which smartcard device to use.  The argument is the
	     device ssh	should use to communicate with a smartcard used	for
	     storing the user's	private	RSA key.

     -i	identity_file
	     Selects a file from which the identity (private key) for RSA or
	     DSA authentication	is read.  The default is $HOME/.ssh/identity
	     for protocol version 1, and $HOME/.ssh/id_rsa and
	     $HOME/.ssh/id_dsa for protocol version 2.	Identity files may
	     also be specified on a per-host basis in the configuration	file.
	     It	is possible to have multiple -i	options	(and multiple identi-
	     ties specified in configuration files).

     -k	     Disables forwarding (delegation) of GSSAPI	credentials to the
	     server.

     -L	port:host:hostport
	     Specifies that the	given port on the local	(client) host is to be
	     forwarded to the given host and port on the remote	side.  This
	     works by allocating a socket to listen to port on the local side,
	     and whenever a connection is made to this port, the connection is
	     forwarded over the	secure channel,	and a connection is made to
	     host port hostport	from the remote	machine.  Port forwardings can
	     also be specified in the configuration file.  Only	root can for-
	     ward privileged ports.  IPv6 addresses can	be specified with an
	     alternative syntax: port/host/hostport.

     -l	login_name
	     Specifies the user	to log in as on	the remote machine.  This also
	     may be specified on a per-host basis in the configuration file.

     -m	mac_spec
	     Additionally, for protocol	version	2 a comma-separated list of
	     MAC (message authentication code) algorithms can be specified in
	     order of preference.  See the MACs	keyword	for more information.

     -N	     Do	not execute a remote command.  This is useful for just for-
	     warding ports (protocol version 2 only).

     -n	     Redirects stdin from /dev/null (actually, prevents	reading	from
	     stdin).  This must	be used	when ssh is run	in the background.  A
	     common trick is to	use this to run	X11 programs on	a remote
	     machine.  For example, ssh	-n shadows.cs.hut.fi emacs & will
	     start an emacs on shadows.cs.hut.fi, and the X11 connection will
	     be	automatically forwarded	over an	encrypted channel.  The	ssh
	     program will be put in the	background.  (This does	not work if
	     ssh needs to ask for a password or	passphrase; see	also the -f
	     option.)

     -o	option
	     Can be used to give options in the	format used in the configura-
	     tion file.	 This is useful	for specifying options for which there
	     is	no separate command-line flag.	For full details of the
	     options listed below, and their possible values, see
	     ssh_config(5).

		   AddressFamily
		   BatchMode
		   BindAddress
		   ChallengeResponseAuthentication
		   CheckHostIP
		   Cipher
		   Ciphers
		   ClearAllForwardings
		   Compression
		   CompressionLevel
		   ConnectionAttempts
		   ConnectTimeout
		   DynamicForward
		   EscapeChar
		   ForwardAgent
		   ForwardX11
		   ForwardX11Trusted
		   GatewayPorts
		   GlobalKnownHostsFile
		   GSSAPIAuthentication
		   GSSAPIDelegateCredentials
		   Host
		   HostbasedAuthentication
		   HostKeyAlgorithms
		   HostKeyAlias
		   HostName
		   IdentityFile
		   IdentitiesOnly
		   LocalForward
		   LogLevel
		   MACs
		   NoHostAuthenticationForLocalhost
		   NumberOfPasswordPrompts
		   PasswordAuthentication
		   Port
		   PreferredAuthentications
		   Protocol
		   ProxyCommand
		   PubkeyAuthentication
		   RemoteForward
		   RhostsRSAAuthentication
		   RSAAuthentication
		   ServerAliveInterval
		   ServerAliveCountMax
		   SmartcardDevice
		   StrictHostKeyChecking
		   TCPKeepAlive
		   UsePrivilegedPort
		   User
		   UserKnownHostsFile
		   VerifyHostKeyDNS
		   XAuthLocation

     -p	port
	     Port to connect to	on the remote host.  This can be specified on
	     a per-host	basis in the configuration file.

     -q	     Quiet mode.  Causes all warning and diagnostic messages to	be
	     suppressed.

     -R	port:host:hostport
	     Specifies that the	given port on the remote (server) host is to
	     be	forwarded to the given host and	port on	the local side.	 This
	     works by allocating a socket to listen to port on the remote
	     side, and whenever	a connection is	made to	this port, the connec-
	     tion is forwarded over the	secure channel,	and a connection is
	     made to host port hostport	from the local machine.	 Port forward-
	     ings can also be specified	in the configuration file.  Privileged
	     ports can be forwarded only when logging in as root on the	remote
	     machine.  IPv6 addresses can be specified with an alternative
	     syntax: port/host/hostport.

     -s	     May be used to request invocation of a subsystem on the remote
	     system.  Subsystems are a feature of the SSH2 protocol which
	     facilitate	the use	of SSH as a secure transport for other appli-
	     cations (eg. sftp(1)).  The subsystem is specified	as the remote
	     command.

     -T	     Disable pseudo-tty	allocation.

     -t	     Force pseudo-tty allocation.  This	can be used to execute arbi-
	     trary screen-based	programs on a remote machine, which can	be
	     very useful, e.g.,	when implementing menu services.  Multiple -t
	     options force tty allocation, even	if ssh has no local tty.

     -V	     Display the version number	and exit.

     -v	     Verbose mode.  Causes ssh to print	debugging messages about its
	     progress.	This is	helpful	in debugging connection, authentica-
	     tion, and configuration problems.	Multiple -v options increase
	     the verbosity.  The maximum is 3.

     -X	     Enables X11 forwarding.  This can also be specified on a per-host
	     basis in a	configuration file.

	     X11 forwarding should be enabled with caution.  Users with	the
	     ability to	bypass file permissions	on the remote host (for	the
	     user's X authorization database) can access the local X11 display
	     through the forwarded connection.	An attacker may	then be	able
	     to	perform	activities such	as keystroke monitoring.

     -x	     Disables X11 forwarding.

     -Y	     Enables trusted X11 forwarding.

CONFIGURATION FILES
     ssh may additionally obtain configuration data from a per-user configura-
     tion file and a system-wide configuration file.  The file format and con-
     figuration	options	are described in ssh_config(5).

ENVIRONMENT
     ssh will normally set the following environment variables:

     DISPLAY  The DISPLAY variable indicates the location of the X11 server.
	      It is automatically set by ssh to	point to a value of the	form
	      ``hostname:n'' where hostname indicates the host where the shell
	      runs, and	n is an	integer	>= 1.  ssh uses	this special value to
	      forward X11 connections over the secure channel.	The user
	      should normally not set DISPLAY explicitly, as that will render
	      the X11 connection insecure (and will require the	user to	manu-
	      ally copy	any required authorization cookies).

     HOME     Set to the path of the user's home directory.

     LOGNAME  Synonym for USER;	set for	compatibility with systems that	use
	      this variable.

     MAIL     Set to the path of the user's mailbox.

     PATH     Set to the default PATH, as specified when compiling ssh.

     SSH_ASKPASS
	      If ssh needs a passphrase, it will read the passphrase from the
	      current terminal if it was run from a terminal.  If ssh does not
	      have a terminal associated with it but DISPLAY and SSH_ASKPASS
	      are set, it will execute the program specified by	SSH_ASKPASS
	      and open an X11 window to	read the passphrase.  This is particu-
	      larly useful when	calling	ssh from a .Xsession or	related
	      script.  (Note that on some machines it may be necessary to re-
	      direct the input from /dev/null to make this work.)

     SSH_AUTH_SOCK
	      Identifies the path of a unix-domain socket used to communicate
	      with the agent.

     SSH_CONNECTION
	      Identifies the client and	server ends of the connection.	The
	      variable contains	four space-separated values: client ip-
	      address, client port number, server ip-address and server	port
	      number.

     SSH_ORIGINAL_COMMAND
	      The variable contains the	original command line if a forced com-
	      mand is executed.	 It can	be used	to extract the original	argu-
	      ments.

     SSH_TTY  This is set to the name of the tty (path to the device) associ-
	      ated with	the current shell or command.  If the current session
	      has no tty, this variable	is not set.

     TZ	      The timezone variable is set to indicate the present timezone if
	      it was set when the daemon was started (i.e., the	daemon passes
	      the value	on to new connections).

     USER     Set to the name of the user logging in.

     Additionally, ssh reads $HOME/.ssh/environment, and adds lines of the
     format ``VARNAME=value'' to the environment if the	file exists and	if
     users are allowed to change their environment.  For more information, see
     the PermitUserEnvironment option in sshd_config(5).

FILES
     $HOME/.ssh/known_hosts
	     Records host keys for all hosts the user has logged into that are
	     not in /etc/ssh/ssh_known_hosts.  See sshd(8).

     $HOME/.ssh/identity, $HOME/.ssh/id_dsa, $HOME/.ssh/id_rsa
	     Contains the authentication identity of the user.	They are for
	     protocol 1	RSA, protocol 2	DSA, and protocol 2 RSA, respectively.
	     These files contain sensitive data	and should be readable by the
	     user but not accessible by	others (read/write/execute).  Note
	     that ssh ignores a	private	key file if it is accessible by	oth-
	     ers.  It is possible to specify a passphrase when generating the
	     key; the passphrase will be used to encrypt the sensitive part of
	     this file using 3DES.

     $HOME/.ssh/identity.pub, $HOME/.ssh/id_dsa.pub, $HOME/.ssh/id_rsa.pub
	     Contains the public key for authentication	(public	part of	the
	     identity file in human-readable form).  The contents of the
	     $HOME/.ssh/identity.pub file should be added to the file
	     $HOME/.ssh/authorized_keys	on all machines	where the user wishes
	     to	log in using protocol version 1	RSA authentication.  The con-
	     tents of the $HOME/.ssh/id_dsa.pub	and $HOME/.ssh/id_rsa.pub file
	     should be added to	$HOME/.ssh/authorized_keys on all machines
	     where the user wishes to log in using protocol version 2 DSA/RSA
	     authentication.  These files are not sensitive and	can (but need
	     not) be readable by anyone.  These	files are never	used automati-
	     cally and are not necessary; they are only	provided for the con-
	     venience of the user.

     $HOME/.ssh/config
	     This is the per-user configuration	file.  The file	format and
	     configuration options are described in ssh_config(5).

     $HOME/.ssh/authorized_keys
	     Lists the public keys (RSA/DSA) that can be used for logging in
	     as	this user.  The	format of this file is described in the
	     sshd(8) manual page.  In the simplest form	the format is the same
	     as	the .pub identity files.  This file is not highly sensitive,
	     but the recommended permissions are read/write for	the user, and
	     not accessible by others.

     /etc/ssh/ssh_known_hosts
	     Systemwide	list of	known host keys.  This file should be prepared
	     by	the system administrator to contain the	public host keys of
	     all machines in the organization.	This file should be world-
	     readable.	This file contains public keys,	one per	line, in the
	     following format (fields separated	by spaces): system name, pub-
	     lic key and optional comment field.  When different names are
	     used for the same machine,	all such names should be listed, sepa-
	     rated by commas.  The format is described in the sshd(8) manual
	     page.

	     The canonical system name (as returned by name servers) is	used
	     by	sshd(8)	to verify the client host when logging in; other names
	     are needed	because	ssh does not convert the user-supplied name to
	     a canonical name before checking the key, because someone with
	     access to the name	servers	would then be able to fool host
	     authentication.

     /etc/ssh/ssh_config
	     Systemwide	configuration file.  The file format and configuration
	     options are described in ssh_config(5).

     /etc/ssh/ssh_host_key, /etc/ssh/ssh_host_dsa_key,
	     /etc/ssh/ssh_host_rsa_key
	     These three files contain the private parts of the	host keys and
	     are used for RhostsRSAAuthentication and HostbasedAuthentication.
	     If	the protocol version 1 RhostsRSAAuthentication method is used,
	     ssh must be setuid	root, since the	host key is readable only by
	     root.  For	protocol version 2, ssh	uses ssh-keysign(8) to access
	     the host keys for HostbasedAuthentication.	 This eliminates the
	     requirement that ssh be setuid root when that authentication
	     method is used.  By default ssh is	not setuid root.

     $HOME/.rhosts
	     This file is used in rhosts authentication	to list	the host/user
	     pairs that	are permitted to log in.  (Note	that this file is also
	     used by rlogin and	rsh, which makes using this file insecure.)
	     Each line of the file contains a host name	(in the	canonical form
	     returned by name servers),	and then a user	name on	that host,
	     separated by a space.  On some machines this file may need	to be
	     world-readable if the user's home directory is on a NFS parti-
	     tion, because sshd(8) reads it as root.  Additionally, this file
	     must be owned by the user,	and must not have write	permissions
	     for anyone	else.  The recommended permission for most machines is
	     read/write	for the	user, and not accessible by others.

	     Note that by default sshd(8) will be installed so that it
	     requires successful RSA host authentication before	permitting
	     rhosts authentication.  If	the server machine does	not have the
	     client's host key in /etc/ssh/ssh_known_hosts, it can be stored
	     in	$HOME/.ssh/known_hosts.	 The easiest way to do this is to con-
	     nect back to the client from the server machine using ssh;	this
	     will automatically	add the	host key to $HOME/.ssh/known_hosts.

     $HOME/.shosts
	     This file is used exactly the same	way as .rhosts.	 The purpose
	     for having	this file is to	be able	to use rhosts authentication
	     with ssh without permitting login with rlogin or rsh(1).

     /etc/hosts.equiv
	     This file is used during rhosts authentication.  It contains
	     canonical hosts names, one	per line (the full format is described
	     in	the sshd(8) manual page).  If the client host is found in this
	     file, login is automatically permitted provided client and	server
	     user names	are the	same.  Additionally, successful	RSA host
	     authentication is normally	required.  This	file should only be
	     writable by root.

     /etc/ssh/shosts.equiv
	     This file is processed exactly as /etc/hosts.equiv.  This file
	     may be useful to permit logins using ssh but not using
	     rsh/rlogin.

     /etc/ssh/sshrc
	     Commands in this file are executed	by ssh when the	user logs in
	     just before the user's shell (or command) is started.  See	the
	     sshd(8) manual page for more information.

     $HOME/.ssh/rc
	     Commands in this file are executed	by ssh when the	user logs in
	     just before the user's shell (or command) is started.  See	the
	     sshd(8) manual page for more information.

     $HOME/.ssh/environment
	     Contains additional definitions for environment variables,	see
	     section ENVIRONMENT above.

DIAGNOSTICS
     ssh exits with the	exit status of the remote command or with 255 if an
     error occurred.

SEE ALSO
     gzip(1), rsh(1), scp(1), sftp(1), ssh-add(1), ssh-agent(1),
     ssh-keygen(1), telnet(1), hosts.equiv(5), ssh_config(5), ssh-keysign(8),
     sshd(8)

     T.	Ylonen,	T. Kivinen, M. Saarinen, T. Rinne, and S. Lehtinen, SSH
     Protocol Architecture, draft-ietf-secsh-architecture-12.txt, January
     2002, work	in progress material.

AUTHORS
     OpenSSH is	a derivative of	the original and free ssh 1.2.12 release by
     Tatu Ylonen.  Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo
     de	Raadt and Dug Song removed many	bugs, re-added newer features and cre-
     ated OpenSSH.  Markus Friedl contributed the support for SSH protocol
     versions 1.5 and 2.0.

FreeBSD	9.3		      September	25, 1999		   FreeBSD 9.3

NAME | SYNOPSIS | DESCRIPTION | CONFIGURATION FILES | ENVIRONMENT | FILES | DIAGNOSTICS | SEE ALSO | AUTHORS

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=ssh&sektion=1&manpath=FreeBSD+5.5-RELEASE>

home | help