Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
SIGVEC(2)		  FreeBSD System Calls Manual		     SIGVEC(2)

NAME
     sigvec -- software	signal facilities

LIBRARY
     Standard C	Library	(libc, -lc)

SYNOPSIS
     #include <signal.h>

     struct sigvec {
	     void     (*sv_handler)();
	     int      sv_mask;
	     int      sv_flags;
     };

     int
     sigvec(int	sig, struct sigvec *vec, struct	sigvec *ovec);

DESCRIPTION
     This interface is made obsolete by	sigaction(2).

     The system	defines	a set of signals that may be delivered to a process.
     Signal delivery resembles the occurrence of a hardware interrupt: the
     signal is blocked from further occurrence,	the current process context is
     saved, and	a new one is built.  A process may specify a handler to	which
     a signal is delivered, or specify that a signal is	to be blocked or
     ignored.  A process may also specify that a default action	is to be taken
     by	the system when	a signal occurs.  Normally, signal handlers execute on
     the current stack of the process.	This may be changed, on	a per-handler
     basis, so that signals are	taken on a special signal stack.

     All signals have the same priority.  Signal routines execute with the
     signal that caused	their invocation blocked, but other signals may	yet
     occur.  A global signal mask defines the set of signals currently blocked
     from delivery to a	process.  The signal mask for a	process	is initialized
     from that of its parent (normally 0).  It may be changed with a
     sigblock(2) or sigsetmask(2) call,	or when	a signal is delivered to the
     process.

     When a signal condition arises for	a process, the signal is added to a
     set of signals pending for	the process.  If the signal is not currently
     blocked by	the process then it is delivered to the	process.  When a sig-
     nal is delivered, the current state of the	process	is saved, a new	signal
     mask is calculated	(as described below), and the signal handler is
     invoked.  The call	to the handler is arranged so that if the signal han-
     dling routine returns normally the	process	will resume execution in the
     context from before the signal's delivery.	 If the	process	wishes to
     resume in a different context, then it must arrange to restore the	previ-
     ous context itself.

     When a signal is delivered	to a process a new signal mask is installed
     for the duration of the process' signal handler (or until a sigblock(2)
     or	sigsetmask(2) call is made).  This mask	is formed by taking the	cur-
     rent signal mask, adding the signal to be delivered, and or'ing in	the
     signal mask associated with the handler to	be invoked.

     The sigvec() function assigns a handler for a specific signal.  If	vec is
     non-zero, it specifies a handler routine and mask to be used when deliv-
     ering the specified signal.  Further, if the SV_ONSTACK bit is set	in
     sv_flags, the system will deliver the signal to the process on a signal
     stack, specified with sigaltstack(2).  If ovec is non-zero, the previous
     handling information for the signal is returned to	the user.

     The following is a	list of	all signals with names as in the include file
     <signal.h>:

     NAME	     Default Action	     Description
     SIGHUP	     terminate process	     terminal line hangup
     SIGINT	     terminate process	     interrupt program
     SIGQUIT	     create core image	     quit program
     SIGILL	     create core image	     illegal instruction
     SIGTRAP	     create core image	     trace trap
     SIGABRT	     create core image	     abort(3) call (formerly SIGIOT)
     SIGEMT	     create core image	     emulate instruction executed
     SIGFPE	     create core image	     floating-point exception
     SIGKILL	     terminate process	     kill program
     SIGBUS	     create core image	     bus error
     SIGSEGV	     create core image	     segmentation violation
     SIGSYS	     create core image	     non-existent system call invoked
     SIGPIPE	     terminate process	     write on a	pipe with no reader
     SIGALRM	     terminate process	     real-time timer expired
     SIGTERM	     terminate process	     software termination signal
     SIGURG	     discard signal	     urgent condition present on
					     socket
     SIGSTOP	     stop process	     stop (cannot be caught or
					     ignored)
     SIGTSTP	     stop process	     stop signal generated from
					     keyboard
     SIGCONT	     discard signal	     continue after stop
     SIGCHLD	     discard signal	     child status has changed
     SIGTTIN	     stop process	     background	read attempted from
					     control terminal
     SIGTTOU	     stop process	     background	write attempted	to
					     control terminal
     SIGIO	     discard signal	     I/O is possible on	a descriptor
					     (see fcntl(2))
     SIGXCPU	     terminate process	     cpu time limit exceeded (see
					     setrlimit(2))
     SIGXFSZ	     terminate process	     file size limit exceeded (see
					     setrlimit(2))
     SIGVTALRM	     terminate process	     virtual time alarm	(see
					     setitimer(2))
     SIGPROF	     terminate process	     profiling timer alarm (see
					     setitimer(2))
     SIGWINCH	     discard signal	     Window size change
     SIGINFO	     discard signal	     status request from keyboard
     SIGUSR1	     terminate process	     User defined signal 1
     SIGUSR2	     terminate process	     User defined signal 2

     Once a signal handler is installed, it remains installed until another
     sigvec() call is made, or an execve(2) is performed.  A signal-specific
     default action may	be reset by setting sv_handler to SIG_DFL.  The
     defaults are process termination, possibly	with core dump;	no action;
     stopping the process; or continuing the process.  See the above signal
     list for each signal's default action.  If	sv_handler is SIG_IGN current
     and pending instances of the signal are ignored and discarded.

     If	a signal is caught during the system calls listed below, the call is
     normally restarted.  The call can be forced to terminate prematurely with
     an	EINTR error return by setting the SV_INTERRUPT bit in sv_flags.	 The
     affected system calls include read(2), write(2), sendto(2), recvfrom(2),
     sendmsg(2)	and recvmsg(2) on a communications channel or a	slow device
     (such as a	terminal, but not a regular file) and during a wait(2) or
     ioctl(2).	However, calls that have already committed are not restarted,
     but instead return	a partial success (for example,	a short	read count).

     After a fork(2) or	vfork(2) all signals, the signal mask, the signal
     stack, and	the restart/interrupt flags are	inherited by the child.

     The execve(2) system call reinstates the default action for all signals
     which were	caught and resets all signals to be caught on the user stack.
     Ignored signals remain ignored; the signal	mask remains the same; signals
     that interrupt system calls continue to do	so.

NOTES
     The mask specified	in vec is not allowed to block SIGKILL or SIGSTOP.
     This is done silently by the system.

     The SV_INTERRUPT flag is not available in 4.2BSD, hence it	should not be
     used if backward compatibility is needed.

RETURN VALUES
     The sigvec() function returns the value 0 if successful; otherwise	the
     value -1 is returned and the global variable errno	is set to indicate the
     error.

EXAMPLES
     On	the VAX-11 The handler routine can be declared:

	   void	handler(sig, code, scp)
	   int sig, code;
	   struct sigcontext *scp;

     Here sig is the signal number, into which the hardware faults and traps
     are mapped	as defined below.  The code argument is	either a constant as
     given below or, for compatibility mode faults, the	code provided by the
     hardware (Compatibility mode faults are distinguished from	the other
     SIGILL traps by having PSL_CM set in the psl).  The scp argument is a
     pointer to	the sigcontext structure (defined in <signal.h>), used to
     restore the context from before the signal.

ERRORS
     The sigvec() function will	fail and no new	signal handler will be
     installed if one of the following occurs:

     [EFAULT]		Either vec or ovec points to memory that is not	a
			valid part of the process address space.

     [EINVAL]		The sig	argument is not	a valid	signal number.

     [EINVAL]		An attempt is made to ignore or	supply a handler for
			SIGKILL	or SIGSTOP.

SEE ALSO
     kill(1), kill(2), ptrace(2), sigaction(2),	sigaltstack(2),	sigblock(2),
     sigpause(2), sigprocmask(2), sigsetmask(2), sigsuspend(2),	setjmp(3),
     siginterrupt(3), signal(3), sigsetops(3), tty(4)

BUGS
     This manual page is still confusing.

FreeBSD	10.1			April 19, 1994			  FreeBSD 10.1

NAME | LIBRARY | SYNOPSIS | DESCRIPTION | NOTES | RETURN VALUES | EXAMPLES | ERRORS | SEE ALSO | BUGS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=sigvec&sektion=2&manpath=FreeBSD+8.1-RELEASE>

home | help