Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
SBSH(4)		       FreeBSD Kernel Interfaces Manual		       SBSH(4)

NAME
     sbsh -- Granch SBNI16 SHDSL modem device driver

SYNOPSIS
     device sbsh

DESCRIPTION
     The sbsh driver provides support for an internal PCI modem	SBNI16-SHDSL.
     A device is introduced to OS as common ethernet-like netcard which	must
     be	configured with	ifconfig(8) (all standard network interface parameters
     could be set). Modem-specific parameters (master/slave mode, line rate
     etc.) must	be set with the	sb16config utility before interface activa-
     tion.

DIAGNOSTICS
     sbsh%d: couldn't map memory
     sbsh%d: couldn't map interrupt
     sbsh%d: couldn't set up irq  A fatal initialization error has occurred.

     sbsh%d: unable to load firmware  A	fatal error has	occurred while
     sb16config	running.

     sbsh%d: firmware wasn't loaded  ifconfig...up has failed because device
     hadn't been configured with sb16config.

     sbsh%d: transmit timeout
     sbsh%d: interrupt posted but not delivered	 Probably, a hardware error or
     incompatibility.

     sbsh%d: unable to get mbuf
     sbsh%d: unable to get mbuf	cluster	 The driver failed to allocate a mem-
     ory buffer.

FILES
     The sources for the driver	reside in:

     /sys/dev/sbsh/if_sbsh.c
     /sys/dev/sbsh/if_sbshreg.h

SEE ALSO
     arp(4), netintro(4), ifconfig(8), /usr/ports/sysutils/sb16config

HISTORY
     The sbsh device driver first appeared in FreeBSD 4.9.

AUTHORS
     The sbsh driver was written by Denis I. Timofeev <timofeev@granch.ru>.

FreeBSD	10.1			April 11, 2003			  FreeBSD 10.1

NAME | SYNOPSIS | DESCRIPTION | DIAGNOSTICS | FILES | SEE ALSO | HISTORY | AUTHORS

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=sbsh&sektion=4&manpath=FreeBSD+4.11-RELEASE>

home | help