Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
RAL(4)		       FreeBSD Kernel Interfaces Manual			RAL(4)

     ral -- Ralink Technology RT2500 IEEE 802.11 driver

     To	compile	support	for the
     ral driver	into your kernel, place	the following lines in your kernel
	 configuration file:

	   device ral
	   device wlan

	 Alternatively,	to load	the
     ral driver	at boot	time, place the	following line in loader.conf(5):


     The ral driver supports PCI/CardBus wireless adapters based on the	Ralink
     RT2500 chipset.

     The RT2500	chipset	consists of two	integrated chips, a RT2560 MAC/BBP and
     a radio transceiver (the model of which depends on	the card revision).

     The RT2522, RT2523, RT2524, RT2525, RT2525e and RT2526 radio transceivers
     operate in	the 2.4GHz band	(802.11b/g) whereas the	RT5222 is a dual-band
     radio transceiver that can	operate	in the 2.4GHz and 5.2GHz bands

     The transmit speed	is user-selectable or can be adapted automatically by
     the driver	depending on the received-signal strength.

     The following adapters should work:

     Card			  Bus
     A-Link WL54H		  PCI
     A-Link WL54PC		  CardBus
     Amigo AWI-914W		  CardBus
     Amigo AWI-922W		  mini-PCI
     Amigo AWI-926W		  PCI
     AMIT WL531C		  CardBus
     AMIT WL531P		  PCI
     AOpen AOI-831		  PCI
     ASUS WL-107G		  CardBus
     ASUS WL-130g		  PCI
     Atlantis Land A02-PCI-W54	  PCI
     Atlantis Land A02-PCM-W54	  CardBus
     Belkin F5D7000 v3		  PCI
     Belkin F5D7010 v2		  CardBus
     Billionton	MIWLGRL		  mini-PCI
     Canyon CN-WF511		  PCI
     Canyon CN-WF513		  CardBus
     CC&C WL-2102		  CardBus
     CNet CWC-854		  CardBus
     CNet CWP-854		  PCI
     Compex WL54G		  CardBus
     Compex WLP54G		  PCI
     Conceptronic C54RC		  CardBus
     Conceptronic C54Ri		  PCI
     Digitus DN-7001G-RA	  CardBus
     Digitus DN-7006G-RA	  PCI
     E-Tech WGPC02		  CardBus
     E-Tech WGPI02		  PCI
     Edimax EW-7108PCg		  CardBus
     Edimax EW-7128g		  PCI
     Eminent EM3036		  CardBus
     Eminent EM3037		  PCI
     Encore ENLWI-G-RLAM	  PCI
     Encore ENPWI-G-RLAM	  CardBus
     Fiberline WL-400P		  PCI
     Fibreline WL-400X		  CardBus
     Gigabyte GN-WIKG		  mini-PCI
     Gigabyte GN-WMKG		  CardBus
     Gigabyte GN-WPKG		  PCI
     Hawking HWC54GR		  CardBus
     Hawking HWP54GR		  PCI
     iNexQ CR054g-009 (R03)	  PCI
     JAHT WN-4054P		  CardBus
     JAHT WN-4054PCI		  PCI
     LevelOne WNC-0301 v2	  PCI
     LevelOne WPC-0301 v2	  CardBus
     Linksys WMP54G v4		  PCI
     Micronet SP906GK		  PCI
     Micronet SP908GK V3	  CardBus
     Minitar MN54GCB-R		  CardBus
     Minitar MN54GPC-R		  PCI
     MSI CB54G2			  CardBus
     MSI MP54G2			  mini-PCI
     MSI PC54G2			  PCI
     OvisLink EVO-W54PCI	  PCI
     PheeNet HWL-PCIG/RA	  PCI
     Pro-Nets CB80211G		  CardBus
     Pro-Nets PC80211G		  PCI
     Repotec RP-WB7108		  CardBus
     Repotec RP-WP0854		  PCI
     SATech SN-54C		  CardBus
     SATech SN-54P		  PCI
     Sitecom WL-112		  CardBus
     Sitecom WL-115		  PCI
     SparkLAN WL-685R		  CardBus
     Surecom EP-9321-g		  PCI
     Surecom EP-9321-g1		  PCI
     Surecom EP-9428-g		  CardBus
     Sweex LC500050		  CardBus
     Sweex LC700030		  PCI
     TekComm NE-9321-g		  PCI
     TekComm NE-9428-g		  CardBus
     Unex CR054g-R02		  PCI
     Unex MR054g-R02		  CardBus
     Zinwell ZWX-G160		  CardBus
     Zinwell ZWX-G360		  mini-PCI
     Zinwell ZWX-G361		  PCI
     Zonet ZEW1500		  CardBus
     Zonet ZEW1600		  PCI

     An	up to date list	can be found at

     Join an existing BSS network (i.e., connect to an access point):

	   ifconfig ral0 inet netmask 0xffffff00

     Join a specific BSS network with network name ``my_net'':

	   ifconfig ral0 inet netmask 0xffffff00 ssid my_net

     Join a specific BSS network with 40-bit WEP encryption:

	   ifconfig ral0 inet netmask 0xffffff00 ssid my_net \
	       wepmode on wepkey 0x1234567890

     Join a specific BSS network with 104-bit WEP encryption:

	   ifconfig ral0 inet netmask 0xffffff00 ssid my_net \
	       wepmode on wepkey 0x01020304050607080910111213

     ral%d: device timeout  The	driver will reset the hardware.	 This should
     not happen.

     arp(4), cardbus(4), netintro(4), pci(4), wlan(4), ifconfig(8)

     Ralink Technology,

     The ral driver first appeared in OpenBSD 3.7.

     PCI ral adapters seem to require a	PCI 2.2	compliant motherboard and will
     likely not	work with PCI 2.1 only motherboard.

     The ral driver was	written	by Damien Bergamini <>.

FreeBSD	6.0			 July 16, 2005			   FreeBSD 6.0


Want to link to this manual page? Use this URL:

home | help