Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
PS(1)			FreeBSD	General	Commands Manual			 PS(1)

NAME
     ps	-- process status

SYNOPSIS
     ps	[-aCcdefHhjlmrSTuvwXxZ]	[-O fmt	| -o fmt] [-G gid[,gid...]] [-M	core]
	[-N system] [-p	pid[,pid...]] [-t tty[,tty...]]	[-U user[,user...]]
     ps	[-L]

DESCRIPTION
     The ps utility displays a header line, followed by	lines containing
     information about all of your processes that have controlling terminals.
     If	the -x options is specified, ps	will also display processes that do
     not have controlling terminals.

     A different set of	processes can be selected for display by using any
     combination of the	-a, -G,	-p, -T,	-t, and	-U options.  If	more than one
     of	these options are given, then ps will select all processes which are
     matched by	at least one of	the given options.

     For the processes which have been selected	for display, ps	will usually
     display one line per process.  The	-H option may result in	multiple out-
     put lines (one line per thread) for some processes.  By default all of
     these output lines	are sorted first by controlling	terminal, then by
     process ID.  The -m, -r, -u, and -v options will change the sort order.
     If	more than one sorting option was given,	then the selected processes
     will be sorted by the last	sorting	option which was specified.

     For the processes which have been selected	for display, the information
     to	display	is selected based on a set of keywords (see the	-L, -O,	and -o
     options).	The default output format includes, for	each process, the
     process' ID, controlling terminal,	state, CPU time	(including both	user
     and system	time) and associated command.

     The process file system (see procfs(5)) should be mounted when ps is exe-
     cuted, otherwise not all information will be available.

     The options are as	follows:

     -a	     Display information about other users' processes as well as your
	     own.  If the security.bsd.see_other_uids sysctl is	set to zero,
	     this option is honored only if the	UID of the user	is 0.

     -c	     Change the	``command'' column output to just contain the exe-
	     cutable name, rather than the full	command	line.

     -C	     Change the	way the	CPU percentage is calculated by	using a
	     ``raw'' CPU calculation that ignores ``resident'' time (this nor-
	     mally has no effect).

     -d	     Arrange processes into descendancy	order and prefix each command
	     with indentation text showing sibling and parent/child relation-
	     ships.  If	either of the -m and -r	options	are also used, they
	     control how sibling processes are sorted relative to eachother.

     -e	     Display the environment as	well.

     -f	     Show commandline and environment information about	swapped	out
	     processes.	 This option is	honored	only if	the UID	of the user is
	     0.

     -G	     Display information about processes which are running with	the
	     specified real group IDs.

     -H	     Show all of the kernel visible threads associated with each
	     process.  Depending on the	threading package that is in use, this
	     may show only the process,	only the kernel	scheduled entities, or
	     all of the	process	threads.

     -h	     Repeat the	information header as often as necessary to guarantee
	     one header	per page of information.

     -j	     Print information associated with the following keywords: user,
	     pid, ppid,	pgid, sid, jobc, state,	tt, time, and command.

     -L	     List the set of keywords available	for the	-O and -o options.

     -l	     Display information associated with the following keywords: uid,
	     pid, ppid,	cpu, pri, nice,	vsz, rss, mwchan, state, tt, time, and
	     command.

     -M	     Extract values associated with the	name list from the specified
	     core instead of the currently running system.

     -m	     Sort by memory usage, instead of the combination of controlling
	     terminal and process ID.

     -N	     Extract the name list from	the specified system instead of	the
	     default, which is the kernel image	the system has booted from.

     -O	     Add the information associated with the space or comma separated
	     list of keywords specified, after the process ID, in the default
	     information display.  Keywords may	be appended with an equals
	     (`=') sign	and a string.  This causes the printed header to use
	     the specified string instead of the standard header.

     -o	     Display information associated with the space or comma separated
	     list of keywords specified.  The last keyword in the list may be
	     appended with an equals (`=') sign	and a string that spans	the
	     rest of the argument, and can contain space and comma characters.
	     This causes the printed header to use the specified string
	     instead of	the standard header.  Multiple keywords	may also be
	     given in the form of more than one	-o option.  So the header
	     texts for multiple	keywords can be	changed.  If all keywords have
	     empty header texts, no header line	is written.

     -p	     Display information about processes which match the specified
	     process IDs.

     -r	     Sort by current CPU usage,	instead	of the combination of control-
	     ling terminal and process ID.

     -S	     Change the	way the	process	times, namely cputime, systime,	and
	     usertime, are calculated by summing all exited children to	their
	     parent process.

     -T	     Display information about processes attached to the device	asso-
	     ciated with the standard input.

     -t	     Display information about processes attached to the specified
	     terminal devices.	Full pathnames,	as well	as abbreviations (see
	     explanation of the	tt keyword) can	be specified.

     -U	     Display the processes belonging to	the specified usernames.

     -u	     Display information associated with the following keywords: user,
	     pid, %cpu,	%mem, vsz, rss,	tt, state, start, time,	and command.
	     The -u option implies the -r option.

     -v	     Display information associated with the following keywords: pid,
	     state, time, sl, re, pagein, vsz, rss, lim, tsiz, %cpu, %mem, and
	     command.  The -v option implies the -m option.

     -w	     Use 132 columns to	display	information, instead of	the default
	     which is your window size.	 If the	-w option is specified more
	     than once,	ps will	use as many columns as necessary without
	     regard for	your window size.

     -X	     When displaying processes matched by other	options, skip any pro-
	     cesses which do not have a	controlling terminal.

     -x	     When displaying processes matched by other	options, include pro-
	     cesses which do not have a	controlling terminal.  This is the
	     opposite of the -X	option.	 If both -X and	-x are specified in
	     the same command, then ps will use	the one	which was specified
	     last.

     -Z	     Add mac(4)	label to the list of keywords for which	ps will	dis-
	     play information.

     A complete	list of	the available keywords are listed below.  Some of
     these keywords are	further	specified as follows:

     %cpu      The CPU utilization of the process; this	is a decaying average
	       over up to a minute of previous (real) time.  Since the time
	       base over which this is computed	varies (since processes	may be
	       very young) it is possible for the sum of all %cpu fields to
	       exceed 100%.

     %mem      The percentage of real memory used by this process.

     flags     The flags associated with the process as	in the include file
	       <sys/proc.h>:

	       P_ADVLOCK	    0x00001	  Process may hold a POSIX
						  advisory lock
	       P_CONTROLT	    0x00002	  Has a	controlling terminal
	       P_KTHREAD	    0x00004	  Kernel thread
	       P_FOLLOWFORK	    0x00008	  Attach debugger to new
						  children
	       P_PPWAIT		    0x00010	  Parent is waiting for	child
						  to exec/exit
	       P_PROFIL		    0x00020	  Has started profiling
	       P_STOPPROF	    0x00040	  Has thread in	requesting to
						  stop prof
	       P_HADTHREADS	    0x00080	  Has had threads (no cleanup
						  shortcuts)
	       P_SUGID		    0x00100	  Had set id privileges	since
						  last exec
	       P_SYSTEM		    0x00200	  System proc: no sigs,	stats
						  or swapping
	       P_SINGLE_EXIT	    0x00400	  Threads suspending should
						  exit,	not wait
	       P_TRACED		    0x00800	  Debugged process being
						  traced
	       P_WAITED		    0x01000	  Someone is waiting for us
	       P_WEXIT		    0x02000	  Working on exiting
	       P_EXEC		    0x04000	  Process called exec
	       P_WKILLED	    0x08000	  Killed, shall	go to
						  kernel/user boundary ASAP
	       P_CONTINUED	    0x10000	  Proc has continued from a
						  stopped state
	       P_STOPPED_SIG	    0x20000	  Stopped due to
						  SIGSTOP/SIGTSTP
	       P_STOPPED_TRACE	    0x40000	  Stopped because of tracing
	       P_STOPPED_SINGLE	    0x80000	  Only one thread can continue
	       P_PROTECTED	    0x100000	  Do not kill on memory
						  overcommit
	       P_SIGEVENT	    0x200000	  Process pending signals
						  changed
	       P_SINGLE_BOUNDARY    0x400000	  Threads should suspend at
						  user boundary
	       P_HWPMC		    0x800000	  Process is using HWPMCs
	       P_JAILED		    0x1000000	  Process is in	jail
	       P_INEXEC		    0x4000000	  Process is in	execve()
	       P_STATCHILD	    0x8000000	  Child	process	stopped	or
						  exited
	       P_INMEM		    0x10000000	  Loaded into memory
	       P_SWAPPINGOUT	    0x20000000	  Process is being swapped out
	       P_SWAPPINGIN	    0x40000000	  Process is being swapped in

     label     The MAC label of	the process.

     lim       The soft	limit on memory	used, specified	via a call to
	       setrlimit(2).

     lstart    The exact time the command started, using the `%c' format
	       described in strftime(3).

     lockname  The name	of the lock that the process is	currently blocked on.
	       If the name is invalid or unknown, then ``???'' is displayed.

     logname   The login name associated with the session the process is in
	       (see getlogin(2)).

     mwchan    The event name if the process is	blocked	normally, or the lock
	       name if the process is blocked on a lock.  See the wchan	and
	       lockname	keywords for details.

     nice      The process scheduling increment	(see setpriority(2)).

     rss       the real	memory (resident set) size of the process (in 1024
	       byte units).

     start     The time	the command started.  If the command started less than
	       24 hours	ago, the start time is displayed using the
	       ``%l:ps.1p'' format described in	strftime(3).  If the command
	       started less than 7 days	ago, the start time is displayed using
	       the ``%a6.15p'' format.	Otherwise, the start time is displayed
	       using the ``%e%b%y'' format.

     state     The state is given by a sequence	of characters, for example,
	       ``RWNA''.  The first character indicates	the run	state of the
	       process:

	       D       Marks a process in disk (or other short term, uninter-
		       ruptible) wait.
	       I       Marks a process that is idle (sleeping for longer than
		       about 20	seconds).
	       L       Marks a process that is waiting to acquire a lock.
	       R       Marks a runnable	process.
	       S       Marks a process that is sleeping	for less than about 20
		       seconds.
	       T       Marks a stopped process.
	       W       Marks an	idle interrupt thread.
	       Z       Marks a dead process (a ``zombie'').

	       Additional characters after these, if any, indicate additional
	       state information:

	       +       The process is in the foreground	process	group of its
		       control terminal.
	       <       The process has raised CPU scheduling priority.
	       E       The process is trying to	exit.
	       J       Marks a process which is	in jail(2).  The hostname of
		       the prison can be found in /proc/<pid>/status.
	       L       The process has pages locked in core (for example, for
		       raw I/O).
	       N       The process has reduced CPU scheduling priority (see
		       setpriority(2)).
	       s       The process is a	session	leader.
	       V       The process is suspended	during a vfork(2).
	       W       The process is swapped out.
	       X       The process is being traced or debugged.

     tt	       An abbreviation for the pathname	of the controlling terminal,
	       if any.	The abbreviation consists of the three letters follow-
	       ing /dev/tty, or, for pseudo-terminals, the corresponding entry
	       in /dev/pts.  This is followed by a `-' if the process can no
	       longer reach that controlling terminal (i.e., it	has been
	       revoked).  The full pathname of the controlling terminal	is
	       available via the tty keyword.

     wchan     The event (an address in	the system) on which a process waits.
	       When printed numerically, the initial part of the address is
	       trimmed off and the result is printed in	hex, for example,
	       0x80324000 prints as 324000.

     When printing using the command keyword, a	process	that has exited	and
     has a parent that has not yet waited for the process (in other words, a
     zombie) is	listed as ``<defunct>'', and a process which is	blocked	while
     trying to exit is listed as ``<exiting>''.	 If the	arguments cannot be
     located (usually because it has not been set, as is the case of system
     processes and/or kernel threads) the command name is printed within
     square brackets.  The ps utility first tries to obtain the	arguments
     cached by the kernel (if they were	shorter	than the value of the
     kern.ps_arg_cache_limit sysctl).  The process can change the arguments
     shown with	setproctitle(3).  Otherwise, ps	makes an educated guess	as to
     the file name and arguments given when the	process	was created by examin-
     ing memory	or the swap area.  The method is inherently somewhat unreli-
     able and in any event a process is	entitled to destroy this information.
     The ucomm (accounting) keyword can, however, be depended on.  If the
     arguments are unavailable or do not agree with the	ucomm keyword, the
     value for the ucomm keyword is appended to	the arguments in parentheses.

KEYWORDS
     The following is a	complete list of the available keywords	and their
     meanings.	Several	of them	have aliases (keywords which are synonyms).

     %cpu	percentage CPU usage (alias pcpu)
     %mem	percentage memory usage	(alias pmem)
     acflag	accounting flag	(alias acflg)
     args	command	and arguments
     comm	command
     command	command	and arguments
     cow	number of copy-on-write	faults
     cpu	short-term CPU usage factor (for scheduling)
     dsiz	data size (in Kbytes)
     etime	elapsed	running	time
     flags	the process flags, in hexadecimal (alias f)
     inblk	total blocks read (alias inblock)
     jid	jail ID
     jobc	job control count
     ktrace	tracing	flags
     label	MAC label
     lim	memoryuse limit
     lockname	lock currently blocked on (as a	symbolic name)
     logname	login name of user who started the session
     lstart	time started
     majflt	total page faults
     minflt	total page reclaims
     msgrcv	total messages received	(reads from pipes/sockets)
     msgsnd	total messages sent (writes on pipes/sockets)
     mwchan	wait channel or	lock currently blocked on
     nice	nice value (alias ni)
     nivcsw	total involuntary context switches
     nsigs	total signals taken (alias nsignals)
     nswap	total swaps in/out
     nvcsw	total voluntary	context	switches
     nwchan	wait channel (as an address)
     oublk	total blocks written (alias oublock)
     paddr	process	pointer
     pagein	pageins	(same as majflt)
     pgid	process	group number
     pid	process	ID
     poip	pageouts in progress
     ppid	parent process ID
     pri	scheduling priority
     re		core residency time (in	seconds; 127 = infinity)
     rgid	real group ID
     rgroup	group name (from rgid)
     rlink	reverse	link on	run queue, or 0
     rss	resident set size
     rtprio	realtime priority (101 = not a realtime	process)
     ruid	real user ID
     ruser	user name (from	ruid)
     sid	session	ID
     sig	pending	signals	(alias pending)
     sigcatch	caught signals (alias caught)
     sigignore	ignored	signals	(alias ignored)
     sigmask	blocked	signals	(alias blocked)
     sl		sleep time (in seconds;	127 = infinity)
     ssiz	stack size (in Kbytes)
     start	time started
     state	symbolic process state (alias stat)
     svgid	saved gid from a setgid	executable
     svuid	saved UID from a setuid	executable
     systime	accumulated system CPU time
     tdaddr	thread address
     tdev	control	terminal device	number
     time	accumulated CPU	time, user + system (alias cputime)
     tpgid	control	terminal process group ID
     tsid	control	terminal session ID
     tsiz	text size (in Kbytes)
     tt		control	terminal name (two letter abbreviation)
     tty	full name of control terminal
     uprocp	process	pointer
     ucomm	name to	be used	for accounting
     uid	effective user ID
     upr	scheduling priority on return from system call (alias usrpri)
     user	user name (from	UID)
     usertime	accumulated user CPU time
     vsz	virtual	size in	Kbytes (alias vsize)
     wchan	wait channel (as a symbolic name)
     xstat	exit or	stop status (valid only	for stopped or zombie process)

     Note that the pending column displays bitmask of signals pending in the
     process queue when	-H option is not specified, otherwise the per-thread
     queue of pending signals is shown.

ENVIRONMENT
     The following environment variables affect	the execution of ps:

     COLUMNS  If set, specifies	the user's preferred output width in column
	      positions.  By default, ps attempts to automatically determine
	      the terminal width.

FILES
     /boot/kernel/kernel  default system namelist
     /proc		  the mount point of procfs(5)

SEE ALSO
     kill(1), pgrep(1),	pkill(1), procstat(1), w(1), kvm(3), strftime(3),
     mac(4), procfs(5),	pstat(8), sysctl(8), mutex(9)

STANDARDS
     For historical reasons, the ps utility under FreeBSD supports a different
     set of options from what is described by IEEE Std 1003.2 (``POSIX.2''),
     and what is supported on non-BSD operating	systems.

HISTORY
     The ps command appeared in	Version	4 AT&T UNIX.

BUGS
     Since ps cannot run faster	than the system	and is run as any other	sched-
     uled process, the information it displays can never be exact.

     The ps utility does not correctly display argument	lists containing
     multibyte characters.

FreeBSD	10.1		      September	18, 2012		  FreeBSD 10.1

NAME | SYNOPSIS | DESCRIPTION | KEYWORDS | ENVIRONMENT | FILES | SEE ALSO | STANDARDS | HISTORY | BUGS

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=ps&sektion=1&manpath=FreeBSD+8.4-RELEASE>

home | help