Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
PROCFS(5)                 FreeBSD File Formats Manual                PROCFS(5)

NAME
     procfs -- process file system

SYNOPSIS
     proc            /proc   procfs  rw 0 0

DESCRIPTION
     The process file system, or procfs, implements a view of the system
     process table inside the file system.  It is normally mounted on /proc,
     and is required for the complete operation of programs such as ps(1) and
     w(1).

     The procfs provides a two-level view of process space, unlike the previ-
     ous FreeBSD 1.1 procfs implementation.  At the highest level, processes
     themselves are named, according to their process ids in decimal, with no
     leading zeros.  There is also a special node called curproc which always
     refers to the process making the lookup request.

     Each node is a directory which contains the following entries:

     Each directory contains several files:

     ctl     a write-only file which supports a variety of control operations.
             Control commands are written as strings to the ctl file.  The
             control commands are:
             attach  stops the target process and arranges for the sending
                     process to become the debug control process.
             detach  continue execution of the target process and remove it
                     from control by the debug process (which need not be the
                     sending process).
             run     continue running the target process until a signal is
                     delivered, a breakpoint is hit, or the target process
                     exits.
             step    single step the target process, with no signal delivery.
             wait    wait for the target process to come to a steady state
                     ready for debugging.  The target process must be in this
                     state before any of the other commands are allowed.

             The string can also be the name of a signal, lower case and with-
             out the SIG prefix, in which case that signal is delivered to the
             process (see sigaction(2)).

     dbregs  The debug registers as defined by struct dbregs in
             _machine/reg.h_.  dbregs is currently only implemented on the
             i386 architecture.

     etype   The type of the executable referenced by the file entry.

     file    A reference to the vnode from which the process text was read.
             This can be used to gain access to the process' symbol table, or
             to start another copy of the process.

     fpregs  The floating point registers as defined by struct fpregs in
             _machine/reg.h_.  fpregs is only implemented on machines which
             have distinct general purpose and floating point register sets.

     map     A map of the process' virtual memory.

     mem     The complete virtual memory image of the process.  Only those
             address which exist in the process can be accessed.  Reads and
             writes to this file modify the process.  Writes to the text seg-
             ment remain private to the process.

     note    Used for sending signals to the process.  Not implemented.

     notepg  Used for sending signal to the process group.  Not implemented.

     regs    Allows read and write access to the process' register set.  This
             file contains a binary data structure struct regs defined in
             _machine/reg.h_.  regs can only be written when the process is
             stopped.

     rlimit  This is a read-only file containing the process current and maxi-
             mum limits.  Each line is of the format rlimit current max, with
             -1 indicating infinity.

     status  The process status.  This file is read-only and returns a single
             line containing multiple space-separated fields as follows:

             +o   command name
             +o   process id
             +o   parent process id
             +o   process group id
             +o   session id
             +o   major,minor of the controlling terminal, or -1,-1 if there is
                 no controlling terminal.
             +o   a list of process flags: ctty if there is a controlling ter-
                 minal, sldr if the process is a session leader, noflags if
                 neither of the other two flags are set.
             +o   the process start time in seconds and microseconds, comma
                 separated.
             +o   the user time in seconds and microseconds, comma separated.
             +o   the system time in seconds and microseconds, comma separated.
             +o   the wait channel message
             +o   the process credentials consisting of the effective user id
                 and the list of groups (whose first member is the effective
                 group id) all comma separated.

     In a normal debugging environment, where the target is fork/exec'd by the
     debugger, the debugger should fork and the child should stop itself (with
     a self-inflicted SIGSTOP for example).  The parent should issue a wait
     and then an attach command via the appropriate ctl file.  The child
     process will receive a SIGTRAP immediately after the call to exec (see
     execve(2)).

     Each node is owned by the process's user, and belongs to that user's pri-
     mary group, except for the mem node, which belongs to the kmem group.

FILES
     /proc                  normal mount point for the procfs.
     /proc/pid              directory containing process information for
                            process pid.
     /proc/curproc          directory containing process information for the
                            current process
     /proc/curproc/cmdline  the process executable name
     /proc/curproc/ctl      used to send control messages to the process
     /proc/curproc/etype    executable type
     /proc/curproc/file     executable image
     /proc/curproc/fpregs   the process floating point register set
     /proc/curproc/map      virtual memory map of the process
     /proc/curproc/mem      the complete virtual address space of the process
     /proc/curproc/note     used for signaling the process
     /proc/curproc/notepg   used for signaling the process group
     /proc/curproc/regs     the process register set
     /proc/curproc/rlimit   the process current and maximum rlimit
     /proc/curproc/status   the process' current status

SEE ALSO
     mount(2), sigaction(2), unmount(2), mount_procfs(8)

AUTHORS
     This manual page written by Garrett Wollman, based on the description
     provided by Jan-Simon Pendry, and revamped later by Mike Pritchard.

FreeBSD 4.10                    August 10, 1994                   FreeBSD 4.10

NAME | SYNOPSIS | DESCRIPTION | FILES | SEE ALSO | AUTHORS

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=procfs&sektion=5&manpath=FreeBSD+4.10-RELEASE>

home | help