Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
PCCARDC(8)		FreeBSD	System Manager's Manual		    PCCARDC(8)

NAME
     pccardc --	PC-CARD	(PCMCIA) management and	monitoring tool

SYNOPSIS
     pccardc subcommand	[arg ...]

DESCRIPTION
     The pccardc utility controls PC-CARD slots	and configures and displays
     information about PCMCIA cards.  It understands the following subcom-
     mands:

     beep	  Set beep type
     dumpcis	  Print	card CIS(s)
     dumpcisfile  Print	card CIS(s) from files
     enabler	  Device driver	enabler
     help	  Print	command	summary
     pccardmem	  Allocate memory for pccard driver
     power	  Power	on/off slots and leaves	them disabled
     rdattr	  Read attribute memory
     rdmap	  Read pcic mappings
     rdreg	  Read pcic register
     wrattr	  Write	byte to	attribute memory
     wrreg	  Write	pcic register

     1.	  beep beep_mode

	  Specifies the	sound made upon	card insertion or removal.  This sub-
	  command corresponds to pccard_beep in	rc.conf(5).  Allowed values
	  for beep_mode	are:

	  0	  silent mode
	  1	  simple beep mode
	  2	  melody mode

     2.	  dumpcis [slot]

	  Displays CIS (Card Information Structure) tuple in EEPROM of a PC-
	  CARD card.  Slot specifies which slot	to read.  When no option is
	  supplied, it displays	the CIS	of all of the available	cards.

     3.	  dumpcisfile file ...

	  Displays CIS(s) in the same format as	dumpcis, but does so using one
	  or more files	as the input CIS data instead of physical PC-CARD
	  cards.

     4.	  enabler slot driver [-m card addr size] [-a iobase] [-i irq]

	  This is a "point enabler" which can be used to set parameters	manu-
	  ally to enable a card	when pccardd(8)	cannot allocate	drivers	to a
	  PC-CARD card properly.  Specify a PC-CARD slot in slot and a device
	  name (such as	"ed0" or "sio2") in driver, along with some or all of
	  the following	options:

	  -m card addr size
		  maps the shared-memory window	of the card to host address.
		  card is the starting address of shared-memory	(hex) in the
		  card's address space,	addr is	the address (hex) to map the
		  memory to in the computer's address space, and size is the
		  size of memory window	(kb).

	  -a iobase
		  iobase specifies the port a number to	be mapped to the I/O
		  window (hex)

	  -i irq  irq specifies	the IRQ	(decimal from 1	to 15) the card	will
		  use for interrupts.

	  For example,

		  enabler 0 ed0	-m 2000	d4000 16 -a 300	-i 3

	  assigns the card in slot zero	to the first NE2000 ethernet card
	  driver at port 0x300 and IRQ 3, mapping the 16KB memory region at
	  0x2000 in the	card to	0xd4000.

	  This allows use of some unrecognized cards with broken CIS tuples,
	  and is also useful for testing a card	that has not yet reported.
	  However, beware that it frequently cannot recognize new cards	prop-
	  erly.

     5.	  help

	  Prints help for pccardc.

     6.	  pccardmem addr

	  Specifies the	host address using PC-CARD controller(PCIC) will use
	  to map cards to.  Because the	PCIC needs a contiguous	16KB memory,
	  and most machines have other ROMs or devices at other	places in the
	  ISA I/O memory address range,	generally you can only use the follow-
	  ing four addresses:

	  0xd0000  0xd0000-0xd3fff (default)
	  0xd4000  0xd4000-0xd7fff
	  0xd8000  0xd8000-0xdbfff
	  0xdc000  0xdc000-0xdffff

	  You can use "DEFAULT"	instead	of 0xd0000.  This subcommand corre-
	  sponds to pccard_mem in rc.conf(5).

     7.	  power	slot power_mode

	  Changes the state of the power supply	of the card in the specified
	  slot:

	  0	  Turn off a power supply.  If a card becomes unstable when it
		  is removed at	activate state,	this can force it into inac-
		  tive state first and remove it safely.  The slot will	remain
		  disabled until you eject the card with the system running or
		  reenable the card with another pccardc power power command.
		  The slot will	even remain disabled when you suspend and
		  resume the computer.

	  1	  Turn on a power supply and set it into active	state (the
		  system treats	the card as if it was just inserted).

     8.	  rdattr slot offs length

	  Prints a hex dump length bytes long of the EEPROM of the card	in
	  slot slot starting at	offs.  All parameters are in hex.

     9.	  rdmap	[slot]

	  Displays where the four memory windows and two I/O windows of	a PC-
	  CARD slot are	mapped to on the host.	If slot	is not supplied, it
	  displays the information for all of slots in the system.

     10.  rdreg	[slot]

	  Displays the 64 registers of the card	in slot	(all slots by
	  default).

     11.  wrattr slot offs value

	  Writes a single byte to the card's EEPROM at an offset address from
	  the top specified in offs (hex), with	a value	specified in value
	  (hex).  This is preserved after the card is removed.

     12.  wrreg	slot reg value

	  Writes a register of a PC-CARD.  Specify a PC-CARD slot number in
	  slot,	a register number in reg (hex) and a value in value (hex).

FILES
     /etc/rc.conf  configuration file

SEE ALSO
     rc.conf(5), pccardd(8)

AUTHORS
     The original version was written by Andrew	McRae <andrew@mega.com.au>.
     Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> fixed	bugs and added some
     features.	This man page was written by Toshihiko ARAI
     <toshi@jp.FreeBSD.org>.

BUGS
     Be	careful	when using enabler and wrattr.	Misuse can make	the system
     unstable or damage	the card.

FreeBSD	9.3		       November	14, 1998		   FreeBSD 9.3

NAME | SYNOPSIS | DESCRIPTION | FILES | SEE ALSO | AUTHORS | BUGS

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=pccardc&sektion=8&manpath=FreeBSD+5.2-RELEASE>

home | help