Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
NG_RFC1490(4)	       FreeBSD Kernel Interfaces Manual		 NG_RFC1490(4)

NAME
     ng_rfc1490	-- RFC 1490 netgraph node type

SYNOPSIS
     #include <netgraph/ng_rfc1490.h>

DESCRIPTION
     The rfc1490 node type performs protocol encapsulation, de-encapsulation,
     and multiplexing according	to RFC 1490 (which has since been updated by
     RFC 2427).	 This particular type of encapsulation is often	used on	top of
     frame relay DLCI channels.

     The downstream hook is used to transmit and receive encapsulated frames.
     On	the other side of the node, the	inet and ppp hooks are used to trans-
     mit and receive raw IP frames and PPP frames, respectively.  PPP frames
     are transmitted and received according to RFC 1973; in particular,	frames
     appearing on the ppp hook begin with the PPP protocol number.  The
     ethernet hook can be used to transmit and receive Ethernet	frames (with-
     out a checksum) in	RFC 1490's bridging format.

     Typically the inet	hook is	connected to the inet hook of an ng_iface(4)
     node.

HOOKS
     This node type supports the following hooks:

     downstream	 Connects to the RFC 1490 peer entity.

     ethernet	 Transmits and receives	bridged	raw Ethernet frames, without a
		 checksum.

     inet	 Transmits and receives	raw IP frames.

     ppp	 Transmits and receives	PPP frames.

CONTROL	MESSAGES
     This node type supports the generic control messages, plus	the following:

     NGM_RFC1490_SET_ENCAP (setencap)
	  This command sets encapsulation method for the node.	The desired
	  method must be passed	as a string message argument, and must be one
	  of the following supported encapsulation modes:

	  "ietf-ip"    IP packets are sent using simple	RFC1490/2427 encapsu-
		       lation.

	  "ietf-snap"  IP packets are sent inside SNAP frames.	Also conforms
		       to RFC1490/2427.

	  "cisco"      IP packets are sent and received	using proprietary
		       Cisco encapsulation method.

     NGM_RFC1490_GET_ENCAP (getencap)
	  This command returns current encapsulation method on the node.

SHUTDOWN
     This node shuts down upon receipt of a NGM_SHUTDOWN control message, or
     when all hooks have been disconnected.

SEE ALSO
     netgraph(4), ng_frame_relay(4), ng_iface(4), ngctl(8)

     C.	Brown and A. Malis, Multiprotocol Interconnect over Frame Relay, RFC
     2427.

     W.	Simpson, PPP in	Frame Relay, RFC 1973.

     http://www.cisco.com/warp/public/121/frf8modes.pdf

HISTORY
     The ng_rfc1490 node type was implemented in FreeBSD 4.0.

AUTHORS
     Julian Elischer <julian@FreeBSD.org>

BUGS
     Not all of	RFC 1490 is implemented.

FreeBSD	9.3		       January 19, 1999			   FreeBSD 9.3

NAME | SYNOPSIS | DESCRIPTION | HOOKS | CONTROL MESSAGES | SHUTDOWN | SEE ALSO | HISTORY | AUTHORS | BUGS

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=ng_rfc1490&sektion=4&manpath=FreeBSD+10.0-RELEASE>

home | help