Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
NEWSYSLOG(8)		FreeBSD	System Manager's Manual		  NEWSYSLOG(8)

NAME
     newsyslog -- maintain system log files to manageable sizes

SYNOPSIS
     newsyslog [-CFNPnrsv] [-R tagname]	[-S pidfile] [-a directory]
	       [-d directory] [-f config_file] [file ...]

DESCRIPTION
     The newsyslog utility should be scheduled to run periodically by cron(8).
     When it is	executed it archives log files if necessary.  If a log file is
     determined	to require archiving, newsyslog	rearranges the files so	that
     ``logfile'' is empty, ``logfile.0'' has the last period's logs in it,
     ``logfile.1'' has the next	to last	period's logs in it, and so on,	up to
     a user-specified number of	archived logs.	Optionally the archived	logs
     can be compressed to save space.

     A log can be archived for three reasons:

	   1.	It is larger than the configured size (in kilobytes).

	   2.	A configured number of hours have elapsed since	the log	was
		last archived.

	   3.	This is	the specific configured	hour for rotation of the log.

     The granularity of	newsyslog is dependent on how often it is scheduled to
     run by cron(8).  Since the	program	is quite fast, it may be scheduled to
     run every hour without any	ill effects, and mode three (above) assumes
     that this is so.

OPTIONS
     The following options can be used with newsyslog:

     -f	config_file
	     Instruct newsyslog	to use config_file instead of
	     /etc/newsyslog.conf for its configuration file.

     -a	directory
	     Specify a directory into which archived log files will be writ-
	     ten.  If a	relative path is given,	it is appended to the path of
	     each log file and the resulting path is used as the directory
	     into which	the archived log for that log file will	be written.
	     If	an absolute path is given, all archived	logs are written into
	     the given directory.  If any component of the path	directory does
	     not exist,	it will	be created when	newsyslog is run.

     -d	directory
	     Specify a directory which all log files will be relative to.  To
	     allow archiving of	logs outside the root, the directory passed to
	     the -a option is unaffected.

     -v	     Place newsyslog in	verbose	mode.  In this mode it will print out
	     each log and its reasons for either trimming that log or skipping
	     it.

     -n	     Cause newsyslog not to trim the logs, but to print	out what it
	     would do if this option were not specified.

     -r	     Remove the	restriction that newsyslog must	be running as root.
	     Of	course,	newsyslog will not be able to send a HUP signal	to
	     syslogd(8)	so this	option should only be used in debugging.

     -s	     Specify that newsyslog should not send any	signals	to any daemon
	     processes that it would normally signal when rotating a log file.
	     For any log file which is rotated,	this option will usually also
	     mean the rotated log file will not	be compressed if there is a
	     daemon which would	have been signalled without this option.  How-
	     ever, this	option is most likely to be useful when	specified with
	     the -R option, and	in that	case the compression will be done.

     -C	     If	specified once,	then newsyslog will create any log files which
	     do	not exist, and which have the C	flag specified in their	config
	     file entry.  If specified multiple	times, then newsyslog will
	     create all	log files which	do not already exist.  If log files
	     are given on the command-line, then the -C	or -CC will only apply
	     to	those specific log files.

     -F	     Force newsyslog to	trim the logs, even if the trim	conditions
	     have not been met.	 This option is	useful for diagnosing system
	     problems by providing you with fresh logs that contain only the
	     problems.

     -N	     Do	not perform any	rotations.  This option	is intended to be used
	     with the -C or -CC	options	when creating log files	is the only
	     objective.

     -P	     Prevent further action if we should send signal but the
	     ``pidfile'' is empty or does not exist.

     -R	tagname
	     Specify that newsyslog should rotate a given list of files, even
	     if	trim conditions	are not	met for	those files.  The tagname is
	     only used in the messages written to the log files	which are
	     rotated.  This differs from the -F	option in that one or more log
	     files must	also be	specified, so that newsyslog will only operate
	     on	those specific files.  This option is mainly intended for the
	     daemons or	programs which write some log files, and want to trig-
	     ger a rotate based	on their own criteria.	With this option they
	     can execute newsyslog to trigger the rotate when they want	it to
	     happen, and still give the	system administrator a way to specify
	     the rules of rotation (such as how	many backup copies are kept,
	     and what kind of compression is done).  When a daemon does	exe-
	     cute newsyslog with the -R	option,	it should make sure all	of the
	     log files are closed before calling newsyslog, and	then it	should
	     re-open the files after newsyslog returns.	 Usually the calling
	     process will also want to specify the -s option, so newsyslog
	     will not send a signal to the very	process	which called it	to
	     force the rotate.	Skipping the signal step will also mean	that
	     newsyslog will return faster, since newsyslog normally waits a
	     few seconds after any signal that is sent.

     -S	pidfile
	     Use pidfile as syslogd(8)'s pidfile.

     If	additional command line	arguments are given, newsyslog will only exam-
     ine log files that	match those arguments; otherwise, it will examine all
     files listed in the configuration file.

FILES
     /etc/newsyslog.conf      newsyslog	configuration file

COMPATIBILITY
     Previous versions of the newsyslog	utility	used the dot (``.'') character
     to	distinguish the	group name.  Beginning with FreeBSD 3.3, this has been
     changed to	a colon	(``:'')	character so that user and group names may
     contain the dot character.	 The dot (``.'') character is still accepted
     for backwards compatibility.

HISTORY
     The newsyslog utility originated from NetBSD and first appeared in
     FreeBSD 2.2.

AUTHORS
     Theodore Ts'o, MIT	Project	Athena

     Copyright 1987, Massachusetts Institute of	Technology

SEE ALSO
     bzip2(1), gzip(1),	syslog(3), newsyslog.conf(5), chown(8),	syslogd(8)

BUGS
     Does not yet automatically	read the logs to find security breaches.

FreeBSD	10.1			 July 23, 2010			  FreeBSD 10.1

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | FILES | COMPATIBILITY | HISTORY | AUTHORS | SEE ALSO | BUGS

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=newsyslog&sektion=8&manpath=FreeBSD+7.4-RELEASE>

home | help