Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
NEWFS_MSDOS(8)		FreeBSD	System Manager's Manual		NEWFS_MSDOS(8)

NAME
     newfs_msdos -- construct a	new MS-DOS (FAT) file system

SYNOPSIS
     newfs_msdos [-N] [-@ offset] [-B boot] [-C	create-size] [-F FAT-type]
		 [-I VolumeId] [-L label] [-O OEM] [-S sector-size]
		 [-a FAT-size] [-b block-size] [-c cluster-size] [-e DirEnts]
		 [-f format] [-h heads]	[-i info] [-k backup] [-m media]
		 [-n FATs] [-o hidden] [-r reserved] [-s total]
		 [-u track-size] special [disktype]

DESCRIPTION
     The newfs_msdos utility creates a FAT12, FAT16, or	FAT32 file system on
     device or file named special, using disktab(5) entry disktype to deter-
     mine geometry, if required.

     If	special	does not contain a / and -C is not used, it is assumed to be a
     device name and /dev/ is prepended	to the name to construct the actual
     device name.  To work a file in the current directory use ./filename

     The options are as	follow:

     -N	     Do	not create a file system: just print out parameters.

     -@	offset
	     Build the filesystem at the specified offset in bytes in the
	     device or file.  A	suffix s, k, m,	g (lower or upper case)
	     appended to the offset specifies that the number is in sectors,
	     kilobytes,	megabytes or gigabytes,	respectively.

     -B	boot
	     Get bootstrap from	file.

     -C	create-size
	     Create the	image file with	the specified size.  A suffix charac-
	     ter appended to the size is interpreted as	for the	-@ option.
	     The file is created by truncating any existing file with the same
	     name and resizing it to the requested size.  If the file system
	     supports sparse files, the	space occupied on disk may be smaller
	     than the size specified as	parameter.

     -F	FAT-type
	     FAT type (one of 12, 16, or 32).

     -I	VolumeID
	     Volume ID,	a 32 bit number	in decimal or hexadecimal (0x...) for-
	     mat.

     -L	label
	     Volume label (up to 11 characters).  The label should consist of
	     only those	characters permitted in	regular	DOS (8+3) filenames.

     -O	OEM  OEM string	(up to 8 characters).  The default is "BSD  4.4".

     -S	sector-size
	     Number of bytes per sector.  Acceptable values are	powers of 2 in
	     the range 512 through 32768.

     -a	FAT-size
	     Number of sectors per FAT.

     -b	block-size
	     File system block size (bytes per cluster).  This should resolve
	     to	an acceptable number of	sectors	per cluster (see below).

     -c	cluster-size
	     Sectors per cluster.  Acceptable values are powers	of 2 in	the
	     range 1 through 128.  If the block	or cluster size	are not	speci-
	     fied, the code uses a cluster between 512 bytes and 32K depending
	     on	the filesystem size.

     -e	DirEnts
	     Number of root directory entries (FAT12 and FAT16 only).

     -f	format
	     Specify a standard	(floppy	disk) format.  The standard formats
	     are (capacities in	kilobytes): 160, 180, 320, 360,	640, 720,
	     1200, 1232, 1440, 2880.

     -h	heads
	     Number of drive heads.

     -i	info
	     Location of the file system info sector (FAT32 only).  A value of
	     0xffff signifies no info sector.

     -k	backup
	     Location of the backup boot sector	(FAT32 only).  A value of
	     0xffff signifies no backup	sector.

     -m	media
	     Media descriptor (acceptable range	0xf0 to	0xff).

     -n	FATs
	     Number of FATs.  Acceptable values	are 1 to 16 inclusive.	The
	     default is	2.

     -o	hidden
	     Number of hidden sectors.

     -r	reserved
	     Number of reserved	sectors.

     -s	total
	     File system size.

     -u	track-size
	     Number of sectors per track.

NOTES
     If	some parameters	(e.g. size, number of sectors, etc.) are not specified
     through options or	disktype, the program tries to generate	them automati-
     cally.  In	particular, the	size is	determined as the device or file size
     minus the offset specified	with the -@ option.  When the geometry is not
     available,	it is assumed to be 63 sectors,	255 heads.  The	size is	then
     rounded to	become a multiple of the track size and	avoid complaints by
     some filesystem code.

     FAT file system parameters	occupy a "Boot Sector BPB (BIOS	Parameter
     Block)" in	the first of the "reserved" sectors which precede the actual
     file system.  For reference purposes, this	structure is presented below.

     struct bsbpb {
	 u_int16_t   bps;	     /*	[-S] bytes per sector */
	 u_int8_t    spc;	     /*	[-c] sectors per cluster */
	 u_int16_t   res;	     /*	[-r] reserved sectors */
	 u_int8_t    nft;	     /*	[-n] number of FATs */
	 u_int16_t   rde;	     /*	[-e] root directory entries */
	 u_int16_t   sec;	     /*	[-s] total sectors */
	 u_int8_t    mid;	     /*	[-m] media descriptor */
	 u_int16_t   spf;	     /*	[-a] sectors per FAT */
	 u_int16_t   spt;	     /*	[-u] sectors per track */
	 u_int16_t   hds;	     /*	[-h] drive heads */
	 u_int32_t   hid;	     /*	[-o] hidden sectors */
	 u_int32_t   bsec;	     /*	[-s] big total sectors */
     };
     /*	FAT32 extensions */
     struct bsxbpb {
	 u_int32_t   bspf;	     /*	[-a] big sectors per FAT */
	 u_int16_t   xflg;	     /*	control	flags */
	 u_int16_t   vers;	     /*	file system version */
	 u_int32_t   rdcl;	     /*	root directory start cluster */
	 u_int16_t   infs;	     /*	[-i] file system info sector */
	 u_int16_t   bkbs;	     /*	[-k] backup boot sector	*/
     };

LIMITATION
     The maximum file size is 4GB, even	if the file system itself is bigger.

EXIT STATUS
     Exit status is 0 on success and 1 on error.

EXAMPLES
     Create a file system, using default parameters, on	/dev/ad0s1:

	   newfs_msdos /dev/ad0s1

     Create a standard 1.44M file system, with volume label foo, on /dev/fd0:

	   newfs_msdos -f 1440 -L foo fd0

     Create a 30MB image file, with the	FAT partition starting 63 sectors
     within the	image file:

	   newfs_msdos -C 30M -@63s ./somefile

SEE ALSO
     disktab(5), disklabel(8), fdisk(8), newfs(8)

HISTORY
     The newfs_msdos utility first appeared in FreeBSD 3.0.

AUTHORS
     Robert Nordier <rnordier@FreeBSD.org>.

FreeBSD	10.1			April 11, 2009			  FreeBSD 10.1

NAME | SYNOPSIS | DESCRIPTION | NOTES | LIMITATION | EXIT STATUS | EXAMPLES | SEE ALSO | HISTORY | AUTHORS

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=newfs_msdos&sektion=8&manpath=FreeBSD+8.1-RELEASE>

home | help