Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
MTREE(5)		  FreeBSD File Formats Manual		      MTREE(5)

NAME
     mtree -- format of	mtree dir hierarchy files

DESCRIPTION
     The mtree format is a textual format that describes a collection of
     filesystem	objects.  Such files are typically used	to create or verify
     directory hierarchies.

   General Format
     An	mtree file consists of a series	of lines, each providing information
     about a single filesystem object.	Leading	whitespace is always ignored.

     When encoding file	or pathnames, any backslash character or character
     outside of	the 95 printable ASCII characters must be encoded as a back-
     slash followed by three octal digits.  When reading mtree files, any
     appearance	of a backslash followed	by three octal digits should be	con-
     verted into the corresponding character.

     Each line is interpreted independently as one of the following types:

     Signature	 The first line	of any mtree file must begin with ``#mtree''.
		 If a file contains any	full path entries, the first line
		 should	begin with ``#mtree v2.0'', otherwise, the first line
		 should	begin with ``#mtree v1.0''.

     Blank	 Blank lines are ignored.

     Comment	 Lines beginning with #	are ignored.

     Special	 Lines beginning with /	are special commands that influence
		 the interpretation of later lines.

     Relative	 If the	first whitespace-delimited word	has no / characters,
		 it is the name	of a file in the current directory.  Any rela-
		 tive entry that describes a directory changes the current
		 directory.

     dot-dot	 As a special case, a relative entry with the filename ..
		 changes the current directory to the parent directory.
		 Options on dot-dot entries are	always ignored.

     Full	 If the	first whitespace-delimited word	has a /	character
		 after the first character, it is the pathname of a file rela-
		 tive to the starting directory.  There	can be multiple	full
		 entries describing the	same file.

     Some tools	that process mtree files may require that multiple lines
     describing	the same file occur consecutively.  It is not permitted	for
     the same file to be mentioned using both a	relative and a full file spec-
     ification.

   Special commands
     Two special commands are currently	defined:

     /set	 This command defines default values for one or	more keywords.
		 It is followed	on the same line by one	or more	whitespace-
		 separated keyword definitions.	 These definitions apply to
		 all following files that do not specify a value for that key-
		 word.

     /unset	 This command removes any default value	set by a previous /set
		 command.  It is followed on the same line by one or more key-
		 words separated by whitespace.

   Keywords
     After the filename, a full	or relative entry consists of zero or more
     whitespace-separated keyword definitions.	Each such definitions consists
     of	a key from the following list immediately followed by an '=' sign and
     a value.  Software	programs reading mtree files should warn about unrec-
     ognized keywords.

     Currently supported keywords are as follows:

     cksum	 The checksum of the file using	the default algorithm speci-
		 fied by the cksum(1) utility.

     contents	 The full pathname of a	file whose contents should be compared
		 to the	contents of this file.

     flags	 The file flags	as a symbolic name.  See chflags(1) for	infor-
		 mation	on these names.	 If no flags are to be set the string
		 ``none'' may be used to override the current default.

     ignore	 Ignore	any file hierarchy below this file.

     gid	 The file group	as a numeric value.

     gname	 The file group	as a symbolic name.

     md5	 The MD5 message digest	of the file.

     md5digest	 A synonym for md5.

     sha1	 The FIPS 160-1	(``SHA-1'') message digest of the file.

     sha1digest	 A synonym for sha1.

     sha256	 The FIPS 180-2	(``SHA-256'') message digest of	the file.

     sha256digest
		 A synonym for sha256.

     ripemd160digest
		 The RIPEMD160 message digest of the file.

     rmd160	 A synonym for ripemd160digest.

     rmd160digest
		 A synonym for ripemd160digest.

     mode	 The current file's permissions	as a numeric (octal) or	sym-
		 bolic value.

     nlink	 The number of hard links the file is expected to have.

     nochange	 Make sure this	file or	directory exists but otherwise ignore
		 all attributes.

     uid	 The file owner	as a numeric value.

     uname	 The file owner	as a symbolic name.

     size	 The size, in bytes, of	the file.

     link	 The file the symbolic link is expected	to reference.

     time	 The last modification time of the file, in seconds and
		 nanoseconds.  The value should	include	a period character and
		 exactly nine digits after the period.

     type	 The type of the file; may be set to any one of	the following:

		 block	     block special device
		 char	     character special device
		 dir	     directory
		 fifo	     fifo
		 file	     regular file
		 link	     symbolic link
		 socket	     socket

SEE ALSO
     cksum(1), find(1),	mtree(8)

HISTORY
     The mtree utility appeared	in 4.3BSD-Reno.	 The MD5 digest	capability was
     added in FreeBSD 2.1, in response to the widespread use of	programs which
     can spoof cksum(1).  The SHA-1 and	RIPEMD160 digests were added in
     FreeBSD 4.0, as new attacks have demonstrated weaknesses in MD5.  The
     SHA-256 digest was	added in FreeBSD 6.0.  Support for file	flags was
     added in FreeBSD 4.0, and mostly comes from NetBSD.  The ``full'' entry
     format was	added by NetBSD.

BUGS
     The FreeBSD implementation	of mtree does not currently support the	mtree
     2.0 format.  The requirement for a	``#mtree'' signature line is new and
     not yet widely implemented.

FreeBSD	10.1		       December	31, 2007		  FreeBSD 10.1

NAME | DESCRIPTION | SEE ALSO | HISTORY | BUGS

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=mtree&sektion=5&manpath=FreeBSD+10.0-RELEASE>

home | help