Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
LS(1)			FreeBSD	General	Commands Manual			 LS(1)

NAME
     ls	-- list	directory contents

SYNOPSIS
     ls	[-ABCFGHILPRSTUWZabcdfghiklmnopqrstuwxy1,] [-D format] [file ...]

DESCRIPTION
     For each operand that names a file	of a type other	than directory,	ls
     displays its name as well as any requested, associated information.  For
     each operand that names a file of type directory, ls displays the names
     of	files contained	within that directory, as well as any requested, asso-
     ciated information.

     If	no operands are	given, the contents of the current directory are dis-
     played.  If more than one operand is given, non-directory operands	are
     displayed first; directory	and non-directory operands are sorted sepa-
     rately and	in lexicographical order.

     The following options are available:

     -A	     Include directory entries whose names begin with a	dot (`.')
	     except for	. and ...  Automatically set for the super-user	unless
	     -I	is specified.

     -B	     Force printing of non-printable characters	(as defined by
	     ctype(3) and current locale settings) in file names as \xxx,
	     where xxx is the numeric value of the character in	octal.

     -C	     Force multi-column	output;	this is	the default when output	is to
	     a terminal.

     -D	format
	     When printing in the long (-l) format, use	format to format the
	     date and time output.  The	argument format	is a string used by
	     strftime(3).  Depending on	the choice of format string, this may
	     result in a different number of columns in	the output.  This
	     option overrides the -T option.

     -F	     Display a slash (`/') immediately after each pathname that	is a
	     directory,	an asterisk (`*') after	each that is executable, an at
	     sign (`@')	after each symbolic link, an equals sign (`=') after
	     each socket, a percent sign (`%') after each whiteout, and	a ver-
	     tical bar (`|') after each	that is	a FIFO.

     -G	     Enable colorized output.  This option is equivalent to defining
	     CLICOLOR in the environment.  (See	below.)	 This functionality
	     can be compiled out by removing the definition of COLORLS.

     -H	     Symbolic links on the command line	are followed.  This option is
	     assumed if	none of	the -F,	-d, or -l options are specified.

     -I	     Prevent -A	from being automatically set for the super-user.

     -L	     If	argument is a symbolic link, list the file or directory	the
	     link references rather than the link itself.  This	option cancels
	     the -P option.

     -P	     If	argument is a symbolic link, list the link itself rather than
	     the object	the link references.  This option cancels the -H and
	     -L	options.

     -R	     Recursively list subdirectories encountered.

     -S	     Sort by size (largest file	first) before sorting the operands in
	     lexicographical order.

     -T	     When printing in the long (-l) format, display complete time
	     information for the file, including month,	day, hour, minute,
	     second, and year.	The -D option gives even more control over the
	     output format.

     -U	     Use time when file	was created for	sorting	or printing.

     -W	     Display whiteouts when scanning directories.

     -Z	     Display each file's MAC label; see	maclabel(7).

     -a	     Include directory entries whose names begin with a	dot (`.').

     -b	     As	-B, but	use C escape codes whenever possible.

     -c	     Use time when file	status was last	changed	for sorting or print-
	     ing.

     -d	     Directories are listed as plain files (not	searched recursively).

     -f	     Output is not sorted.

     -g	     This option is deprecated and is only available for compatibility
	     with 4.3BSD; it was used to display the group name	in the long
	     (-l) format output.

     -h	     When used with the	-l option, use unit suffixes: Byte, Kilobyte,
	     Megabyte, Gigabyte, Terabyte and Petabyte in order	to reduce the
	     number of digits to four or fewer using base 2 for	sizes.

     -i	     For each file, print the file's file serial number	(inode num-
	     ber).

     -k	     This has the same effect as setting environment variable
	     BLOCKSIZE to 1024,	except that it also nullifies any -h options
	     to	its left.

     -l	     (The lowercase letter ``ell''.)  List files in the	long format,
	     as	described in the The Long Format subsection below.

     -m	     Stream output format; list	files across the page, separated by
	     commas.

     -n	     Display user and group IDs	numerically rather than	converting to
	     a user or group name in a long (-l) output.

     -o	     Include the file flags in a long (-l) output.

     -p	     Write a slash (`/') after each filename if	that file is a direc-
	     tory.

     -q	     Force printing of non-graphic characters in file names as the
	     character `?'; this is the	default	when output is to a terminal.

     -r	     Reverse the order of the sort.

     -s	     Display the number	of blocks used in the file system by each
	     file.  Block sizes	and directory totals are handled as described
	     in	The Long Format	subsection below, except (if the long format
	     is	not also requested) the	directory totals are not output	when
	     the output	is in a	single column, even if multi-column output is
	     requested.

     -t	     Sort by descending	time modified (most recently modified first).
	     If	two files have the same	modification timestamp,	sort their
	     names in ascending	lexicographical	order.	The -r option reverses
	     both of these sort	orders.

	     Note that these sort orders are contradictory: the	time sequence
	     is	in descending order, the lexicographical sort is in ascending
	     order.  This behavior is mandated by IEEE Std 1003.2
	     (``POSIX.2'').  This feature can cause problems listing files
	     stored with sequential names on FAT file systems, such as from
	     digital cameras, where it is possible to have more	than one image
	     with the same timestamp.  In such a case, the photos cannot be
	     listed in the sequence in which they were taken.  To ensure the
	     same sort order for time and for lexicographical sorting, set the
	     environment variable LS_SAMESORT or use the -y option.  This
	     causes ls to reverse the lexicographal sort order when sorting
	     files with	the same modification timestamp.

     -u	     Use time of last access, instead of time of last modification of
	     the file for sorting (-t) or printing (-l).

     -w	     Force raw printing	of non-printable characters.  This is the
	     default when output is not	to a terminal.

     -x	     The same as -C, except that the multi-column output is produced
	     with entries sorted across, rather	than down, the columns.

     -y	     When the -t option	is set,	sort the alphabetical output in	the
	     same order	as the time output.  This has the same effect as set-
	     ting LS_SAMESORT.	See the	description of the -t option for more
	     details.

     -1	     (The numeric digit	``one''.)  Force output	to be one entry	per
	     line.  This is the	default	when output is not to a	terminal.

     -,	     (Comma) When the -l option	is set,	print file sizes grouped and
	     separated by thousands using the non-monetary separator returned
	     by	localeconv(3), typically a comma or period.  If	no locale is
	     set, or the locale	does not have a	non-monetary separator,	this
	     option has	no effect.

     The -1, -C, -x, and -l options all	override each other; the last one
     specified determines the format used.

     The -c, -u, and -U	options	all override each other; the last one speci-
     fied determines the file time used.

     The -S and	-t options override each other;	the last one specified deter-
     mines the sort order used.

     The -B, -b, -w, and -q options all	override each other; the last one
     specified determines the format used for non-printable characters.

     The -H, -L	and -P options all override each other (either partially or
     fully); they are applied in the order specified.

     By	default, ls lists one entry per	line to	standard output; the excep-
     tions are to terminals or when the	-C or -x options are specified.

     File information is displayed with	one or more <blank>s separating	the
     information associated with the -i, -s, and -l options.

   The Long Format
     If	the -l option is given,	the following information is displayed for
     each file:	file mode, number of links, owner name,	group name, MAC	label,
     number of bytes in	the file, abbreviated month, day-of-month file was
     last modified, hour file last modified, minute file last modified,	and
     the pathname.

     If	the modification time of the file is more than 6 months	in the past or
     future, and the -D	or -T are not specified, then the year of the last
     modification is displayed in place	of the hour and	minute fields.

     If	the owner or group names are not a known user or group name, or	the -n
     option is given, the numeric ID's are displayed.

     If	the file is a character	special	or block special file, the device num-
     ber for the file is displayed in the size field.  If the file is a	sym-
     bolic link	the pathname of	the linked-to file is preceded by ``->''.

     The listing of a directory's contents is preceded by a labeled total num-
     ber of blocks used	in the file system by the files	which are listed as
     the directory's contents (which may or may	not include . and .. and other
     files which start with a dot, depending on	other options).

     The default block size is 512 bytes.  The block size may be set with
     option -k or environment variable BLOCKSIZE.  Numbers of blocks in	the
     output will have been rounded up so the numbers of	bytes is at least as
     many as used by the corresponding file system blocks (which might have a
     different size).

     The file mode printed under the -l	option consists	of the entry type and
     the permissions.  The entry type character	describes the type of file, as
     follows:

	   -	 Regular file.
	   b	 Block special file.
	   c	 Character special file.
	   d	 Directory.
	   l	 Symbolic link.
	   p	 FIFO.
	   s	 Socket.
	   w	 Whiteout.

     The next three fields are three characters	each: owner permissions, group
     permissions, and other permissions.  Each field has three character posi-
     tions:

	   1.	If r, the file is readable; if -, it is	not readable.

	   2.	If w, the file is writable; if -, it is	not writable.

	   3.	The first of the following that	applies:

		      S	    If in the owner permissions, the file is not exe-
			    cutable and	set-user-ID mode is set.  If in	the
			    group permissions, the file	is not executable and
			    set-group-ID mode is set.

		      s	    If in the owner permissions, the file is exe-
			    cutable and	set-user-ID mode is set.  If in	the
			    group permissions, the file	is executable and set-
			    group-ID mode is set.

		      x	    The	file is	executable or the directory is search-
			    able.

		      -	    The	file is	neither	readable, writable, exe-
			    cutable, nor set-user-ID nor set-group-ID mode,
			    nor	sticky.	 (See below.)

		These next two apply only to the third character in the	last
		group (other permissions).

		      T	    The	sticky bit is set (mode	1000), but not execute
			    or search permission.  (See	chmod(1) or
			    sticky(7).)

		      t	    The	sticky bit is set (mode	1000), and is search-
			    able or executable.	 (See chmod(1) or sticky(7).)

     The next field contains a plus (`+') character if the file	has an ACL, or
     a space (`	') if it does not.  The	ls utility does	not show the actual
     ACL; use getfacl(1) to do this.

ENVIRONMENT
     The following environment variables affect	the execution of ls:

     BLOCKSIZE	     If	this is	set, its value,	rounded	up to 512 or down to a
		     multiple of 512, will be used as the block	size in	bytes
		     by	the -l and -s options.	See The	Long Format subsection
		     for more information.

     CLICOLOR	     Use ANSI color sequences to distinguish file types.  See
		     LSCOLORS below.  In addition to the file types mentioned
		     in	the -F option some extra attributes (setuid bit	set,
		     etc.) are also displayed.	The colorization is dependent
		     on	a terminal type	with the proper	termcap(5) capabili-
		     ties.  The	default	``cons25'' console has the proper
		     capabilities, but to display the colors in	an xterm(1),
		     for example, the TERM variable must be set	to
		     ``xterm-color''.  Other terminal types may	require	simi-
		     lar adjustments.  Colorization is silently	disabled if
		     the output	is not directed	to a terminal unless the
		     CLICOLOR_FORCE variable is	defined.

     CLICOLOR_FORCE  Color sequences are normally disabled if the output is
		     not directed to a terminal.  This can be overridden by
		     setting this variable.  The TERM variable still needs to
		     reference a color capable terminal	however	otherwise it
		     is	not possible to	determine which	color sequences	to
		     use.

     COLUMNS	     If	this variable contains a string	representing a decimal
		     integer, it is used as the	column position	width for dis-
		     playing multiple-text-column output.  The ls utility cal-
		     culates how many pathname text columns to display based
		     on	the width provided.  (See -C and -x.)

     LANG	     The locale	to use when determining	the order of day and
		     month in the long -l format output.  See environ(7) for
		     more information.

     LSCOLORS	     The value of this variable	describes what color to	use
		     for which attribute when colors are enabled with
		     CLICOLOR.	This string is a concatenation of pairs	of the
		     format fb,	where f	is the foreground color	and b is the
		     background	color.

		     The color designators are as follows:

			   a	 black
			   b	 red
			   c	 green
			   d	 brown
			   e	 blue
			   f	 magenta
			   g	 cyan
			   h	 light grey
			   A	 bold black, usually shows up as dark grey
			   B	 bold red
			   C	 bold green
			   D	 bold brown, usually shows up as yellow
			   E	 bold blue
			   F	 bold magenta
			   G	 bold cyan
			   H	 bold light grey; looks	like bright white
			   x	 default foreground or background

		     Note that the above are standard ANSI colors.  The	actual
		     display may differ	depending on the color capabilities of
		     the terminal in use.

		     The order of the attributes are as	follows:

			   1.	directory
			   2.	symbolic link
			   3.	socket
			   4.	pipe
			   5.	executable
			   6.	block special
			   7.	character special
			   8.	executable with	setuid bit set
			   9.	executable with	setgid bit set
			   10.	directory writable to others, with sticky bit
			   11.	directory writable to others, without sticky
				bit

		     The default is "exfxcxdxbxegedabagacad", i.e., blue fore-
		     ground and	default	background for regular directories,
		     black foreground and red background for setuid executa-
		     bles, etc.

     LS_COLWIDTHS    If	this variable is set, it is considered to be a colon-
		     delimited list of minimum column widths.  Unreasonable
		     and insufficient widths are ignored (thus zero signifies
		     a dynamically sized column).  Not all columns have
		     changeable	widths.	 The fields are, in order: inode,
		     block count, number of links, user	name, group name,
		     flags, file size, file name.

     LS_SAMESORT     If	this variable is set, the -t option sorts the names of
		     files with	the same modification timestamp	in the same
		     sense as the time sort.  See the description of the -t
		     option for	more details.

     TERM	     The CLICOLOR functionality	depends	on a terminal type
		     with color	capabilities.

     TZ		     The timezone to use when displaying dates.	 See
		     environ(7)	for more information.

EXIT STATUS
     The ls utility exits 0 on success,	and >0 if an error occurs.

COMPATIBILITY
     The group field is	now automatically included in the long listing for
     files in order to be compatible with the IEEE Std 1003.2 (``POSIX.2'')
     specification.

SEE ALSO
     chflags(1), chmod(1), getfacl(1), sort(1),	xterm(1), localeconv(3),
     strftime(3), strmode(3), termcap(5), maclabel(7), sticky(7), symlink(7),
     getfmac(8)

STANDARDS
     With the exception	of options -I, -g, -n and -o, the ls utility conforms
     to	IEEE Std 1003.1-2001 (``POSIX.1'').

     The ACL support is	compatible with	IEEE Std 1003.2c (``POSIX.2c'')
     Draft 17 (withdrawn).

HISTORY
     An	ls command appeared in Version 1 AT&T UNIX.

BUGS
     To	maintain backward compatibility, the relationships between the many
     options are quite complex.

     The exception mentioned in	the -s option description might	be a feature
     that was based on the fact	that single-column output usually goes to
     something other than a terminal.  It is debatable whether this is a
     design bug.

     IEEE Std 1003.2 (``POSIX.2'') mandates opposite sort orders for files
     with the same timestamp when sorting with the -t option.

FreeBSD	9.2		       November	8, 2012			   FreeBSD 9.2

NAME | SYNOPSIS | DESCRIPTION | ENVIRONMENT | EXIT STATUS | COMPATIBILITY | SEE ALSO | STANDARDS | HISTORY | BUGS

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=ls&manpath=FreeBSD+9.3-RELEASE>

home | help