Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
LOADER(8)		FreeBSD	System Manager's Manual		     LOADER(8)

NAME
     loader -- kernel bootstrapping final stage

DESCRIPTION
     The program called	loader is the final stage of FreeBSD's kernel boot-
     strapping process.	 On IA32 (i386)	architectures, it is a BTX client.  It
     is	linked statically to libstand(3) and usually located in	the directory
     /boot.

     It	provides a scripting language that can be used to automate tasks, do
     pre-configuration or assist in recovery procedures.  This scripting lan-
     guage is roughly divided in two main components.  The smaller one is a
     set of commands designed for direct use by	the casual user, called
     "builtin commands"	for historical reasons.	 The main drive	behind these
     commands is user-friendliness.  The bigger	component is an	ANS Forth com-
     patible Forth interpreter based on	FICL, by John Sadler.

     During initialization, loader will	probe for a console and	set the
     console variable, or set it to serial console (``comconsole'') if the
     previous boot stage used that.  Then, devices are probed, currdev and
     loaddev are set, and LINES	is set to 24.  Next, FICL is initialized, the
     builtin words are added to	its vocabulary,	and /boot/boot.4th is pro-
     cessed if it exists.  No disk switching is	possible while that file is
     being read.  The inner interpreter	loader will use	with FICL is then set
     to	interpret, which is FICL's default.  After that, /boot/loader.rc is
     processed if available, and, failing that,	/boot/boot.conf	is read	for
     historical	reasons.  These	files are processed through the	include	com-
     mand, which reads all of them into	memory before processing them, making
     disk changes possible.

     At	this point, if an autoboot has not been	tried, and if autoboot_delay
     is	not set	to ``NO'' (not case sensitive),	then an	autoboot will be
     tried.  If	the system gets	past this point, prompt	will be	set and	loader
     will engage interactive mode.

BUILTIN	COMMANDS
     In	loader,	builtin	commands take parameters from the command line.
     Presently,	the only way to	call them from a script	is by using evaluate
     on	a string.  If an error condition occurs, an exception will be gener-
     ated, which can be	intercepted using ANS Forth exception handling words.
     If	not intercepted, an error message will be displayed and	the inter-
     preter's state will be reset, emptying the	stack and restoring interpret-
     ing mode.

     The builtin commands available are:

     autoboot [seconds [prompt]]
	     Proceeds to bootstrap the system after a number of	seconds, if
	     not interrupted by	the user.  Displays a countdown	prompt warning
	     the user the system is about to be	booted,	unless interrupted by
	     a key press.  The kernel will be loaded first if necessary.
	     Defaults to 10 seconds.

     bcachestat
	     Displays statistics about disk cache usage.  For depuration only.

     boot
     boot kernelname [...]
     boot -flag	...
	     Immediately proceeds to bootstrap the system, loading the kernel
	     if	necessary.  Any	flags or arguments are passed to the kernel,
	     but they must precede the kernel name, if a kernel	name is	pro-
	     vided.

	     WARNING: The behavior of this builtin is changed if loader.4th(8)
	     is	loaded.

     echo [-n] [<message>]
	     Displays text on the screen.  A new line will be printed unless
	     -n	is specified.

     heap    Displays memory usage statistics.	For debugging purposes only.

     help [topic [subtopic]]
	     Shows help	messages read from /boot/loader.help.  The special
	     topic index will list the topics available.

     include file [file	...]
	     Process script files.  Each file, in turn,	is completely read
	     into memory, and then each	of its lines is	passed to the command
	     line interpreter.	If any error is	returned by the	interpreter,
	     the include command aborts	immediately, without reading any other
	     files, and	returns	an error itself	(see ERRORS).

     load [-t type] file ...
	     Loads a kernel, kernel loadable module (kld), or file of opaque
	     contents tagged as	being of the type type.	 Kernel	and modules
	     can be either in a.out or ELF format.  Any	arguments passed after
	     the name of the file to be	loaded will be passed as arguments to
	     that file.	 Currently, argument passing does not work for the
	     kernel.

     ls	[-l] [path]
	     Displays a	listing	of files in the	directory path,	or the root
	     directory if path is not specified.  If -l	is specified, file
	     sizes will	be shown too.

     lsdev [-v]
	     Lists all of the devices from which it may	be possible to load
	     modules.  If -v is	specified, more	details	are printed.

     lsmod [-v]
	     Displays loaded modules.  If -v is	specified, more	details	are
	     shown.

     more file [file ...]
	     Display the files specified, with a pause at each LINES dis-
	     played.

     pnpscan [-v]
	     Scans for Plug-and-Play devices.  This is not functional at
	     present.

     read [-t seconds] [-p prompt] [variable]
	     Reads a line of input from	the terminal, storing it in variable
	     if	specified.  A timeout can be specified with -t,	though it will
	     be	canceled at the	first key pressed.  A prompt may also be dis-
	     played through the	-p flag.

     reboot  Immediately reboots the system.

     set variable
     set variable=value
	     Set loader's environment variables.

     show [variable]
	     Displays the specified variable's value, or all variables and
	     their values if variable is not specified.

     unload  Remove all	modules	from memory.

     unset variable
	     Removes variable from the environment.

     ?	     Lists available commands.

   BUILTIN ENVIRONMENT VARIABLES
     The loader	has actually two different kinds of `environment' variables.
     There are ANS Forth's environmental queries, and a	separate space of
     environment variables used	by builtins, which are not directly available
     to	Forth words.  It is the	latter type that this section covers.

     Environment variables can be set and unset	through	the set	and unset
     builtins, and can have their values interactively examined	through	the
     use of the	show builtin.  Their values can	also be	accessed as described
     in	BUILTIN	PARSER.

     Notice that these environment variables are not inherited by any shell
     after the system has been booted.

     A few variables are set automatically by loader.  Others can affect the
     behavior of either	loader or the kernel at	boot.  Some options may
     require a value, while others define behavior just	by being set.  Both
     types of builtin variables	are described below.

     acpi_load
	       Unset this to disable automatic loading of the ACPI module.
	       See also	hint.acpi.0.disabled in	device.hints(5).

     autoboot_delay
	       Number of seconds autoboot will wait before booting.  If	this
	       variable	is not defined,	autoboot will default to 10 seconds.

	       If set to ``NO'', no autoboot will be automatically attempted
	       after processing	/boot/loader.rc, though	explicit autoboot's
	       will be processed normally, defaulting to 10 seconds delay.

     boot_askname
	       Instructs the kernel to prompt the user for the name of the
	       root device when	the kernel is booted.

     boot_cdrom
	       Instructs the kernel to try to mount the	root file system from
	       CD-ROM.

     boot_ddb  Instructs the kernel to start in	the DDB	debugger, rather than
	       proceeding to initialize	when booted.

     boot_gdb  Selects gdb-remote mode for the kernel debugger by default.

     boot_multicons
	       Enables multiple	console	support	in the kernel early on boot.
	       In a running system, console configuration can be manipulated
	       by the conscontrol(8) utility.

     boot_serial
	       Force the use of	a serial console even when an internal console
	       is present.

     boot_single
	       Prevents	the kernel from	initiating a multi-user	startup;
	       instead,	a single-user mode will	be entered when	the kernel has
	       finished	device probing.

     boot_userconfig
	       Requests	that the kernel's interactive device configuration
	       program be run when the kernel is booted.  Currently a no-op.

     boot_verbose
	       Setting this variable causes extra debugging information	to be
	       printed by the kernel during the	boot phase.

     bootfile  List of semicolon-separated search path for bootable kernels.
	       The default is ``kernel''.

     console   Defines the current console.

     currdev   Selects the default device.  Syntax for devices is odd.

     init_path
	       Sets the	list of	binaries which the kernel will try to run as
	       the initial process.  The first matching	binary is used.	 The
	       default list is
	       ``/sbin/init:/sbin/oinit:/sbin/init.bak:/stand/sysinstall''.

     interpret
	       Has the value ``OK'' if the Forth's current state is interpret-
	       ing.

     LINES     Define the number of lines on the screen, to be used by the
	       pager.

     module_path
	       Sets the	list of	directories which will be searched for modules
	       named in	a load command or implicitly required by a dependency.
	       The default value for this variable is
	       ``/boot/kernel;/boot/modules''.

     num_ide_disks
	       Sets the	number of IDE disks as a workaround for	some problems
	       in finding the root disk	at boot.  This has been	deprecated in
	       favor of	root_disk_unit.

     prompt    Value of	loader's prompt.  Defaults to ``${interpret}''.	 If
	       variable	prompt is unset, the default prompt is `>'.

     root_disk_unit
	       If the code which detects the disk unit number for the root
	       disk is confused, e.g. by a mix of SCSI and IDE disks, or IDE
	       disks with gaps in the sequence (e.g. no	primary	slave),	the
	       unit number can be forced by setting this variable.

     rootdev   By default the value of currdev is used to set the root file
	       system when the kernel is booted.  This can be overridden by
	       setting rootdev explicitly.

     Other variables are used to override kernel tunable parameters.  The fol-
     lowing tunables are available:

     hw.physmem	   Limit the amount of physical	memory the system will use.
		   By default the size is in bytes, but	the k, K, m, M,	g and
		   G suffixes are also accepted	and indicate kilobytes,
		   megabytes and gigabytes respectively.  An invalid suffix
		   will	result in the variable being ignored by	the kernel.

     hw.pci.enable_io_modes
		   Enable PCI resources	which are left off by some BIOSes or
		   are not enabled correctly by	the device driver.  Tunable
		   value set to	ON (1) by default, but this may	cause problems
		   with	some peripherals.

     kern.maxusers
		   Set the size	of a number of statically allocated system
		   tables; see tuning(7) for a description of how to select an
		   appropriate value for this tunable.	When set, this tunable
		   replaces the	value declared in the kernel compile-time con-
		   figuration file.

     kern.ipc.nmbclusters
		   Set the number of mbuf clusters to be allocated.  The value
		   cannot be set below the default determined when the kernel
		   was compiled.  Modifies NMBCLUSTERS.

     kern.ipc.nsfbufs
		   Set the number of sendfile(2) buffers to be allocated.
		   Overrides NSFBUFS.

     kern.maxswzone
		   Limits the amount of	KVM to be used to hold swap meta
		   information,	which directly governs the maximum amount of
		   swap	the system can support.	 This value is specified in
		   bytes of KVA	space and defaults to around 70MBytes.	Care
		   should be taken to not reduce this value such that the
		   actual amount of configured swap exceeds 1/2	the kernel-
		   supported swap.  The	default	70MB allows the	kernel to sup-
		   port	a maximum of (approximately) 14GB of configured	swap.
		   Only	mess around with this parameter	if you need to greatly
		   extend the KVM reservation for other	resources such as the
		   buffer cache	or NMBCLUSTERS.	 Modifies VM_SWZONE_SIZE_MAX.

     kern.maxbcache
		   Limits the amount of	KVM reserved for use by	the buffer
		   cache, specified in bytes.  The default maximum is 200MB.
		   This	parameter is used to prevent the buffer	cache from
		   eating too much KVM in large-memory machine configurations.
		   Only	mess around with this parameter	if you need to greatly
		   extend the KVM reservation for other	resources such as the
		   swap	zone or	NMBCLUSTERS.  Note that	the NBUF parameter
		   will	override this limit.  Modifies VM_BCACHE_SIZE_MAX.

     machdep.disable_mtrrs
		   Disable the use of i686 MTRRs (x86 only).

     net.inet.tcp.tcbhashsize
		   Overrides the compile-time set value	of TCBHASHSIZE or the
		   preset default of 512.  Must	be a power of 2.

     vm.kmem_size  Sets	the size of kernel memory (bytes).  This overrides the
		   value determined when the kernel was	compiled.  Modifies
		   VM_KMEM_SIZE.

   BUILTIN PARSER
     When a builtin command is executed, the rest of the line is taken by it
     as	arguments, and it is processed by a special parser which is not	used
     for regular Forth commands.

     This special parser applies the following rules to	the parsed text:

     1.	  All backslash	characters are preprocessed.

	  +o   \b , \f ,	\r , \n	and \t are processed as	in C.

	  +o   \s is converted to a space.

	  +o   \v is converted to ASCII 11.

	  +o   \z is just skipped.  Useful for things like ``\0xf\z\0xf''.

	  +o   \0xN and \0xNN are replaced by the hex N or NN.

	  +o   \NNN is replaced by the octal NNN	ASCII character.

	  +o   \" , \' and \$ will escape these characters, preventing them
	      from receiving special treatment in Step 2, described below.

	  +o   \\ will be replaced with a single	\ .

	  +o   In any other occurrence, backslash will just be removed.

     2.	  Every	string between non-escaped quotes or double-quotes will	be
	  treated as a single word for the purposes of the remaining steps.

     3.	  Replace any $VARIABLE	or ${VARIABLE} with the	value of the environ-
	  ment variable	VARIABLE.

     4.	  Space-delimited arguments are	passed to the called builtin command.
	  Spaces can also be escaped through the use of	\\ .

     An	exception to this parsing rule exists, and is described	in BUILTINS
     AND FORTH.

   BUILTINS AND	FORTH
     All builtin words are state-smart,	immediate words.  If interpreted, they
     behave exactly as described previously.  If they are compiled, though,
     they extract their	arguments from the stack instead of the	command	line.

     If	compiled, the builtin words expect to find, at execution time, the
     following parameters on the stack:
	   addrN lenN ... addr2	len2 addr1 len1	N
     where addrX lenX are strings which	will compose the command line that
     will be parsed into the builtin's arguments.  Internally, these strings
     are concatenated in from 1	to N, with a space put between each one.

     If	no arguments are passed, a 0 must be passed, even if the builtin
     accepts no	arguments.

     While this	behavior has benefits, it has its trade-offs.  If the execu-
     tion token	of a builtin is	acquired (through ' or [']), and then passed
     to	catch or execute, the builtin behavior will depend on the system state
     at	the time catch or execute is processed!	 This is particularly annoying
     for programs that want or need to handle exceptions.  In this case, the
     use of a proxy is recommended.  For example:
	   : (boot) boot;

FICL
     FICL is a Forth interpreter written in C, in the form of a	forth virtual
     machine library that can be called	by C functions and vice	versa.

     In	loader,	each line read interactively is	then fed to FICL, which	may
     call loader back to execute the builtin words.  The builtin include will
     also feed FICL, one line at a time.

     The words available to FICL can be	classified into	four groups.  The ANS
     Forth standard words, extra FICL words, extra FreeBSD words, and the
     builtin commands; the latter were already described.  The ANS Forth stan-
     dard words	are listed in the STANDARDS section.  The words	falling	in the
     two other groups are described in the following subsections.

   FICL	EXTRA WORDS
     .env

     .ver

     -roll

     2constant

     >name

     body>

     compare	    This is the	STRING word set's compare.

     compile-only

     endif

     forget-wid

     parse-word

     sliteral	    This is the	STRING word set's sliteral.

     wid-set-super

     w@

     w!

     x.

     empty

     cell-

     -rot

   FREEBSD EXTRA WORDS
     $ (--)    Evaluates the remainder of the input buffer, after having
	       printed it first.

     % (--)    Evaluates the remainder of the input buffer under a catch
	       exception guard.

     .#	       Works like .  but without outputting a trailing space.

     fclose (fd	--)
	       Closes a	file.

     fkey (fd -- char)
	       Reads a single character	from a file.

     fload (fd --)
	       Processes a file	fd.

     fopen (addr len mode -- fd)
	       Opens a file.  Returns a	file descriptor, or -1 in case of
	       failure.	 The mode parameter selects whether the	file is	to be
	       opened for read access, write access, or	both.  The constants
	       O_RDONLY, O_WRONLY, and O_RDWR are defined in
	       /boot/support.4th, indicating read only,	write only, and	read-
	       write access, respectively.

     fread (fd addr len	-- len')
	       Tries to	read len bytes from file fd into buffer	addr.  Returns
	       the actual number of bytes read,	or -1 in case of error or end
	       of file.

     heap? (-- cells)
	       Return the space	remaining in the dictionary heap, in cells.
	       This is not related to the heap used by dynamic memory alloca-
	       tion words.

     inb (port -- char)
	       Reads a byte from a port.

     key (-- char)
	       Reads a single character	from the console.

     key? (-- flag)
	       Returns true if there is	a character available to be read from
	       the console.

     ms	(u --)
	       Waits u microseconds.

     outb (port	char --)
	       Writes a	byte to	a port.

     seconds (-- u)
	       Returns the number of seconds since midnight.

     tib> (-- addr len)
	       Returns the remainder of	the input buffer as a string on	the
	       stack.

     trace! (flag --)
	       Activates or deactivates	tracing.  Does not work	with catch.

   FREEBSD DEFINED ENVIRONMENTAL QUERIES
     arch-i386
	     TRUE if the architecture is IA32.

     arch-alpha
	     TRUE if the architecture is AXP.

     FreeBSD_version
	     FreeBSD version at	compile	time.

     loader_version
	     loader version.

   SYSTEM DOCUMENTATION
FILES
     /boot/loader		 loader	itself.
     /boot/boot.4th		 Additional FICL initialization.
     /boot/boot.conf		 loader	bootstrapping script.  Deprecated.
     /boot/defaults/loader.conf
     /boot/loader.conf
     /boot/loader.conf.local	 loader	configuration files, as	described in
				 loader.conf(5).
     /boot/loader.rc		 loader	bootstrapping script.
     /boot/loader.help		 Loaded	by help.  Contains the help messages.

EXAMPLES
     Boot in single user mode:

	   boot	-s

     Load the kernel, a	splash screen, and then	autoboot in five seconds.
     Notice that a kernel must be loaded before	any other load command is
     attempted.

	   load	kernel
	   load	splash_bmp
	   load	-t splash_image_data /boot/chuckrulez.bmp
	   autoboot 5

     Set the disk unit of the root device to 2,	and then boot.	This would be
     needed in a system	with two IDE disks, with the second IDE	disk hardwired
     to	wd2 instead of wd1.

	   set root_disk_unit=2
	   boot	/kernel

     See also:

     /boot/loader.4th		      Extra builtin-like words.

     /boot/support.4th		      loader.conf processing words.

     /usr/share/examples/bootforth/   Assorted examples.

ERRORS
     The following values are thrown by	loader:

	   100	  Any type of error in the processing of a builtin.

	   -1	  Abort	executed.

	   -2	  Abort" executed.

	   -56	  Quit executed.

	   -256	  Out of interpreting text.

	   -257	  Need more text to succeed -- will finish on next run.

	   -258	  Bye executed.

	   -259	  Unspecified error.

SEE ALSO
     libstand(3), loader.conf(5), tuning(7), boot(8), btxld(8)

STANDARDS
     For the purposes of ANS Forth compliance, loader is an ANS	Forth System
     with Environmental	Restrictions, Providing	.(, :noname, ?do, parse, pick,
     roll, refill, to, value, \, false,	true, <>, 0<>, compile,	, erase, nip,
     tuck and marker from the Core Extensions word set,	Providing the Excep-
     tion Extensions word set, Providing the Locals Extensions word set, Pro-
     viding the	Memory-Allocation Extensions word set, Providing .s, bye, for-
     get, see, words, [if], [else] and [then] from the Programming-Tools
     extension word set, Providing the Search-Order extensions word set.

HISTORY
     The loader	first appeared in FreeBSD 3.1.

AUTHORS
     The loader	was written by Michael Smith <msmith@FreeBSD.org>.

     FICL was written by John Sadler <john_sadler@alum.mit.edu>.

BUGS
     The expect	and accept words will read from	the input buffer instead of
     the console.  The latter will be fixed, but the former will not.

FreeBSD	9.3			October	1, 2004			   FreeBSD 9.3

NAME | DESCRIPTION | BUILTIN COMMANDS | FICL | FILES | EXAMPLES | ERRORS | SEE ALSO | STANDARDS | HISTORY | AUTHORS | BUGS

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=loader&sektion=8&manpath=FreeBSD+5.4-RELEASE>

home | help