Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
LIBARCHIVE(3)	       FreeBSD Library Functions Manual		 LIBARCHIVE(3)

NAME
     libarchive	-- functions for reading and writing streaming archives

LIBRARY
     Streaming Archive Library (libarchive, -larchive)

OVERVIEW
     The libarchive library provides a flexible	interface for reading and
     writing streaming archive files such as tar and cpio.  The	library	is
     inherently	stream-oriented; readers serially iterate through the archive,
     writers serially add things to the	archive.  In particular, note that
     there is no built-in support for random access nor	for in-place modifica-
     tion.

     When reading an archive, the library automatically	detects	the format and
     the compression.  The library currently has read support for:
     +o	 old-style tar archives,
     +o	 most variants of the POSIX ``ustar'' format,
     +o	 the POSIX ``pax interchange'' format,
     +o	 GNU-format tar	archives,
     +o	 most common cpio archive formats,
     +o	 ISO9660 CD images (including RockRidge	and Joliet extensions),
     +o	 Zip archives.
     The library automatically detects archives	compressed with	gzip(1),
     bzip2(1), xz(1), or compress(1) and decompresses them transparently.

     When writing an archive, you can specify the compression to be used and
     the format	to use.	 The library can write
     +o	 POSIX-standard	``ustar'' archives,
     +o	 POSIX ``pax interchange format'' archives,
     +o	 POSIX octet-oriented cpio archives,
     +o	 Zip archive,
     +o	 two different variants	of shar	archives.
     Pax interchange format is an extension of the tar archive format that
     eliminates	essentially all	of the limitations of historic tar formats in
     a standard	fashion	that is	supported by POSIX-compliant pax(1) implemen-
     tations on	many systems as	well as	several	newer implementations of
     tar(1).  Note that	the default write format will suppress the pax
     extended attributes for most entries; explicitly requesting pax format
     will enable those attributes for all entries.

     The read and write	APIs are accessed through the archive_read_XXX() func-
     tions and the archive_write_XXX() functions, respectively,	and either can
     be	used independently of the other.

     The rest of this manual page provides an overview of the library opera-
     tion.  More detailed information can be found in the individual manual
     pages for each API	or utility function.

READING	AN ARCHIVE
     To	read an	archive, you must first	obtain an initialized struct archive
     object from archive_read_new().  You can then modify this object for the
     desired operations	with the various archive_read_set_XXX()	and
     archive_read_support_XXX()	functions.  In particular, you will need to
     invoke appropriate	archive_read_support_XXX() functions to	enable the
     corresponding compression and format support.  Note that these latter
     functions perform two distinct operations:	they cause the corresponding
     support code to be	linked into your program, and they enable the corre-
     sponding auto-detect code.	 Unless	you have specific constraints, you
     will generally want to invoke archive_read_support_compression_all() and
     archive_read_support_format_all() to enable auto-detect for all formats
     and compression types currently supported by the library.

     Once you have prepared the	struct archive object, you call
     archive_read_open() to actually open the archive and prepare it for read-
     ing.  There are several variants of this function;	the most basic expects
     you to provide pointers to	several	functions that can provide blocks of
     bytes from	the archive.  There are	convenience forms that allow you to
     specify a filename, file descriptor, FILE * object, or a block of memory
     from which	to read	the archive data.  Note	that the core library makes no
     assumptions about the size	of the blocks read; callback functions are
     free to read whatever block size is most appropriate for the medium.

     Each archive entry	consists of a header followed by a certain amount of
     data.  You	can obtain the next header with	archive_read_next_header(),
     which returns a pointer to	an struct archive_entry	structure with infor-
     mation about the current archive element.	If the entry is	a regular
     file, then	the header will	be followed by the file	data.  You can use
     archive_read_data() (which	works much like	the read(2) system call) to
     read this data from the archive, or archive_read_data_block() which pro-
     vides a slightly more efficient interface.	 You may prefer	to use the
     higher-level archive_read_data_skip(), which reads	and discards the data
     for this entry, archive_read_data_to_file(), which	copies the data	to the
     provided file descriptor, or archive_read_extract(), which	recreates the
     specified entry on	disk and copies	data from the archive.	In particular,
     note that archive_read_extract() uses the struct archive_entry structure
     that you provide it, which	may differ from	the entry just read from the
     archive.  In particular, many applications	will want to override the
     pathname, file permissions, or ownership.

     Once you have finished reading data from the archive, you should call
     archive_read_close() to close the archive,	then call archive_read_free()
     to	release	all resources, including all memory allocated by the library.

     The archive_read(3) manual	page provides more detailed calling informa-
     tion for this API.

WRITING	AN ARCHIVE
     You use a similar process to write	an archive.  The archive_write_new()
     function creates an archive object	useful for writing, the	various
     archive_write_set_XXX() functions are used	to set parameters for writing
     the archive, and archive_write_open() completes the setup and opens the
     archive for writing.

     Individual	archive	entries	are written in a three-step process: You first
     initialize	a struct archive_entry structure with information about	the
     new entry.	 At a minimum, you should set the pathname of the entry	and
     provide a struct stat with	a valid	st_mode	field, which specifies the
     type of object and	st_size	field, which specifies the size	of the data
     portion of	the object.  The archive_write_header()	function actually
     writes the	header data to the archive.  You can then use
     archive_write_data() to write the actual data.

     After all entries have been written, use the archive_write_free() func-
     tion to release all resources.

     The archive_write(3) manual page provides more detailed calling informa-
     tion for this API.

WRITING	ENTRIES	TO DISK
     The archive_write_disk(3) API allows you to write archive_entry(3)
     objects to	disk using the same API	used by	archive_write(3).  The
     archive_write_disk(3) API is used internally by archive_read_extract();
     using it directly can provide greater control over	how entries get	writ-
     ten to disk.  This	API also makes it possible to share code between ar-
     chive-to-archive copy and archive-to-disk extraction operations.

READING	ENTRIES	FROM DISK
     The archive_read_disk(3) provides some support for	populating
     archive_entry(3) objects from information in the filesystem.

DESCRIPTION
     Detailed descriptions of each function are	provided by the	corresponding
     manual pages.

     All of the	functions utilize an opaque struct archive datatype that pro-
     vides access to the archive contents.

     The struct	archive_entry structure	contains a complete description	of a
     single archive entry.  It uses an opaque interface	that is	fully docu-
     mented in archive_entry(3).

     Users familiar with historic formats should be aware that the newer vari-
     ants have eliminated most restrictions on the length of textual fields.
     Clients should not	assume that filenames, link names, user	names, or
     group names are limited in	length.	 In particular,	pax interchange	format
     can easily	accommodate pathnames in arbitrary character sets that exceed
     PATH_MAX.

RETURN VALUES
     Most functions return ARCHIVE_OK (zero) on	success, non-zero on error.
     The return	value indicates	the general severity of	the error, ranging
     from ARCHIVE_WARN,	which indicates	a minor	problem	that should probably
     be	reported to the	user, to ARCHIVE_FATAL,	which indicates	a serious
     problem that will prevent any further operations on this archive.	On
     error, the	archive_errno()	function can be	used to	retrieve a numeric
     error code	(see errno(2)).	 The archive_error_string() returns a textual
     error message suitable for	display.

     archive_read_new()	and archive_write_new()	return pointers	to an allo-
     cated and initialized struct archive object.

     archive_read_data() and archive_write_data() return a count of the	number
     of	bytes actually read or written.	 A value of zero indicates the end of
     the data for this entry.  A negative value	indicates an error, in which
     case the archive_errno() and archive_error_string() functions can be used
     to	obtain more information.

ENVIRONMENT
     There are character set conversions within	the archive_entry(3) functions
     that are impacted by the currently-selected locale.

SEE ALSO
     tar(1), archive_entry(3), archive_read(3),	archive_util(3),
     archive_write(3), tar(5)

HISTORY
     The libarchive library first appeared in FreeBSD 5.3.

AUTHORS
     The libarchive library was	written	by Tim Kientzle	<kientzle@acm.org>.

BUGS
     Some archive formats support information that is not supported by struct
     archive_entry.  Such information cannot be	fully archived or restored
     using this	library.  This includes, for example, comments,	character
     sets, or the arbitrary key/value pairs that can appear in pax interchange
     format archives.

     Conversely, of course, not	all of the information that can	be stored in
     an	struct archive_entry is	supported by all formats.  For example,	cpio
     formats do	not support nanosecond timestamps; old tar formats do not sup-
     port large	device numbers.

     The archive_read_disk(3) API should support iterating over	filesystems;
     that would	make it	possible to share code among disk-to-archive, archive-
     to-archive, archive-to-disk, and disk-to-disk operations.	Currently, it
     only supports reading the information for a single	file.  (Which is still
     quite useful, as it hides a lot of	system-specific	details.)

FreeBSD	9.3			 July 17, 2010			   FreeBSD 9.3

NAME | LIBRARY | OVERVIEW | READING AN ARCHIVE | WRITING AN ARCHIVE | WRITING ENTRIES TO DISK | READING ENTRIES FROM DISK | DESCRIPTION | RETURN VALUES | ENVIRONMENT | SEE ALSO | HISTORY | AUTHORS | BUGS

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=libarchive&sektion=3&manpath=FreeBSD+9.3-RELEASE>

home | help