Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
LE(4)		     FreeBSD/i386 Kernel Interfaces Manual		 LE(4)

NAME
     le	-- DEC EtherWORKS II/III Ethernet device driver

SYNOPSIS
     device le0	at isa?	port 0x300 irq 5 iomem 0xd0000

DESCRIPTION
     The le driver provides support for	the later Digital Equipment EtherWORKS
     II	(DE200,	DE201, DE202, DE422), and the DEC EtherWORKS III NICs (DE203,
     DE204, and	DE205) NICs.

     The valid IRQ settings for	the le driver are 5, 10, 11, and 15.

DIAGNOSTICS
     le%d: not configured -- too many devices  There is	a limit	of the number
     of	le devices allowed in a	single machine.

     le%d: lemac configuration error: expected IRQ 0x%x	actual 0x%x  The
     probed IRQ	value did not match the	value specified	in the kernel configu-
     ration file.  Either the card should be changed, or a new kernel should
     be	built.

     le%d: lemac configuration error: expected iomem 0x%x actual 0x%x  The
     probed iomem value	did not	match the value	specified in the kernel	con-
     figuration	file.  Either the card should be changed, or a new kernel
     should be built.

     le%d: reset: EEPROM checksum failed (0x%x)	 The le	driver depends on the
     information in the	EEPROM being correct.  If this error occurs, please
     reconfigure the card.

     le%d: fatal RXD error, attempting recovery
     le%d: recovery failed -- board disabled  A	receive	error occurred.	 The
     driver will attempt to recover from this error.  However if it cannot,
     the driver	will shut the card down.

     le%d: lance: warning: excessive collisions: TDR%dns (%d-%dm)  An overly
     high number of Ethernet collisions	were detected.	It may be the case
     that the network is overly	busy.  Or this may suggest a problem with the
     EtherWORKS	card.

SEE ALSO
     arp(4), netintro(4), ng_ether(4), config(8), ifconfig(8)

     Building 4.3 BSD UNIX System with Config.

HISTORY
     The le device driver was present in FreeBSD 2.0.

AUTHORS
     The le device driver was written by Matt Thomas.  This manual page	was
     written by	David E. O'Brien.

FreeBSD	10.1		       January 19, 1997			  FreeBSD 10.1

NAME | SYNOPSIS | DESCRIPTION | DIAGNOSTICS | SEE ALSO | HISTORY | AUTHORS

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=le&sektion=4&manpath=FreeBSD+4.5-RELEASE>

home | help