Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
KDC(8)			FreeBSD	System Manager's Manual			KDC(8)

NAME
     kdc -- Kerberos 5 server

SYNOPSIS
     kdc [-c file | --config-file=file]	[-p | --no-require-preauth]
	 [--max-request=size] [-H | --enable-http] [--no-524] [--kerberos4]
	 [--kerberos4-cross-realm] [-r string |	--v4-realm=string]
	 [-K | --kaserver] [-P portspec	| --ports=portspec] [--detach]
	 [--addresses=list of addresses]

DESCRIPTION
     kdc serves	requests for tickets.  When it starts, it first	checks the
     flags passed, any options that are	not specified with a command line flag
     are taken from a config file, or from a default compiled-in value.

     Options supported:

     -c	file, --config-file=file
	     Specifies the location of the config file,	the default is
	     /var/heimdal/kdc.conf.  This is the only value that can't be
	     specified in the config file.

     -p, --no-require-preauth
	     Turn off the requirement for pre-autentication in the initial AS-
	     REQ for all principals.  The use of pre-authentication makes it
	     more difficult to do offline password attacks.  You might want to
	     turn it off if you	have clients that don't	support	pre-authenti-
	     cation.  Since the	version	4 protocol doesn't support any pre-
	     authentication, serving version 4 clients is just about the same
	     as	not requiring pre-athentication.  The default is to require
	     pre-authentication.  Adding the require-preauth per principal is
	     a more flexible way of handling this.

     --max-request=size
	     Gives an upper limit on the size of the requests that the kdc is
	     willing to	handle.

     -H, --enable-http
	     Makes the kdc listen on port 80 and handle	requests encapsulated
	     in	HTTP.

     --no-524
	     don't respond to 524 requests

     --kerberos4
	     respond to	Kerberos 4 requests

     --kerberos4-cross-realm
	     respond to	Kerberos 4 requests from foreign realms.  This is a
	     known security hole and should not	be enabled unless you under-
	     stand the consequences and	are willing to live with them.

     -r	string,	--v4-realm=string
	     What realm	this server should act as when dealing with version 4
	     requests.	The database can contain any number of realms, but
	     since the version 4 protocol doesn't contain a realm for the
	     server, it	must be	explicitly specified.  The default is whatever
	     is	returned by krb_get_lrealm().  This option is only availabe if
	     the KDC has been compiled with version 4 support.

     -K, --kaserver
	     Enable kaserver emulation (in case	it's compiled in).

     -P	portspec, --ports=portspec
	     Specifies the set of ports	the KDC	should listen on.  It is given
	     as	a white-space separated	list of	services or port numbers.

     --addresses=list of addresses
	     The list of addresses to listen for requests on.  By default, the
	     kdc will listen on	all the	locally	configured addresses.  If only
	     a subset is desired, or the automatic detection fails, this
	     option might be used.

     All activities are	logged to one or more destinations, see	krb5.conf(5),
     and krb5_openlog(3).  The entity used for logging is kdc.

CONFIGURATION FILE
     The configuration file has	the same syntax	as krb5.conf(5), but will be
     read before /etc/krb5.conf, so it may override settings found there.
     Options specific to the KDC only are found	in the ``[kdc]'' section.  All
     the command-line options can preferably be	added in the configuration
     file.  The	only difference	is the pre-authentication flag,	which has to
     be	specified as:

	   require-preauth = no

     (in fact you can specify the option as --require-preauth=no).

     And there are some	configuration options which do not have	command-line
     equivalents:

	   check-ticket-addresses = boolean
		Check the addresses in the ticket when processing TGS
		requests.  The default is FALSE.

	   allow-null-ticket-addresses = boolean
		Permit tickets with no addresses.  This	option is only rele-
		vant when check-ticket-addresses is TRUE.

	   allow-anonymous = boolean
		Permit anonymous tickets with no addresses.

	   enforce-transited-policy = boolean
		Always verify the transited policy, ignoring the
		disable-transited-check	flag if	set in the KDC client request.

	   encode_as_rep_as_tgs_rep = boolean
		Encode AS-Rep as TGS-Rep to be bug-compatible with old DCE
		code.  The Heimdal clients allow both.

	   kdc_warn_pwexpire = time
		How long before	password/principal expiration the KDC should
		start sending out warning messages.

     The configuration file is only read when the kdc is started.  If changes
     made to the configuration file are	to take	effect,	the kdc	needs to be
     restarted.

     An	example	of a config file:

	   [kdc]
		   require-preauth = no
		   v4-realm = FOO.SE
		   key-file = /key-file

BUGS
     If	the machine running the	KDC has	new addresses added to it, the KDC
     will have to be restarted to listen to them.  The reason it doesn't just
     listen to wildcarded (like	INADDR_ANY) addresses, is that the replies has
     to	come from the same address they	were sent to, and most OS:es doesn't
     pass this information to the application.	If your	normal mode of opera-
     tion require that you add and remove addresses, the best option is	proba-
     bly to listen to a	wildcarded TCP socket, and make	sure your clients use
     TCP to connect.  For instance, this will listen to	IPv4 TCP port 88 only:

	   kdc --addresses=0.0.0.0 --ports="88/tcp"

     There should be a way to specify protocol,	port, and address triplets,
     not just addresses	and protocol, port tuples.

SEE ALSO
     kinit(1), krb5.conf(5)

HEIMDAL			       October 21, 2003			       HEIMDAL

NAME | SYNOPSIS | DESCRIPTION | CONFIGURATION FILE | BUGS | SEE ALSO

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=kdc&sektion=8&manpath=FreeBSD+6.1-RELEASE>

home | help