Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
ISCSICTL(8)		FreeBSD	System Manager's Manual		   ISCSICTL(8)

NAME
     iscsictl -- iSCSI initiator management utility

SYNOPSIS
     iscsictl -A -p portal -t target [-u user -s secret]
     iscsictl -A -d discovery-host [-u user -s secret]
     iscsictl -A -a [-c	path]
     iscsictl -A -n nickname [-c path]
     iscsictl -M -i session-id [-p portal] [-t target] [-u user] [-s secret]
     iscsictl -M -i session-id [-n nickname [-c	path]]
     iscsictl -R [-p portal] [-t target]
     iscsictl -R -a
     iscsictl -R -n nickname [-c path]
     iscsictl -L [-v]

DESCRIPTION
     The iscsictl utility is used to configure the iSCSI initiator.

     The following options are available:

     -A	 Add session.

     -M	 Modify	session.

     -R	 Remove	session.

     -L	 List sessions.

     -a	 When adding, add all sessions defined in the configuration file.
	 When removing,	remove all currently established sessions.

     -c	 Path to the configuration file.  The default is /etc/iscsi.conf.

     -d	 Target	host name or address used for SendTargets discovery.  When
	 used, it will add a temporary discovery session.  After discovery is
	 done, sessions	will be	added for each discovered target, and the tem-
	 porary	discovery session will be removed.

     -i	 Session ID, as	displayed by iscsictl -v.

     -n	 The "nickname"	of session defined in the configuration	file.

     -p	 Target	portal - host name or address -	for statically defined tar-
	 gets.

     -s	 CHAP secret.

     -t	 Target	name.

     -u	 CHAP login.

     -v	 Verbose mode.

     Certain parameters	are necessary when adding a session.  One can specify
     these either via command line (using the -t, -p, -u, and -s options), or
     configuration file	(using the -a or -n options).  Some functionality -
     for example mutual	CHAP - is available only via configuration file.

     Since connecting to the target is performed in background,	non-zero exit
     status does not mean that the session was successfully established.  Use
     iscsictl -L to check the connection status.

     Note that in order	for the	iSCSI initiator	to be able to connect to a
     target, the iscsid(8) daemon must be running.

     Also note that FreeBSD currently supports two different initiators: the
     old one, iscsi_initiator(4), with its control utility iscontrol(8), and
     the new one, iscsi(4), with iscsictl and iscsid(8).  The only thing the
     two have in common	is the configuration file, iscsi.conf(5).

FILES
     /etc/iscsi.conf  iSCSI initiator configuration file.

EXIT STATUS
     The iscsictl utility exits	0 on success, and >0 if	an error occurs.

EXAMPLES
     Attach to target iqn.2012-06.com.example:target0, served by 192.168.1.1:
	   iscsictl -A -t iqn.2012-06.com.example:target0 -p 192.168.1.1

     Disconnect	all iSCSI sessions:
	   iscsictl -Ra

SEE ALSO
     iscsi(4), iscsi.conf(5), iscsid(8)

HISTORY
     The iscsictl command appeared in FreeBSD 10.0.

AUTHORS
     The iscsictl utility was developed	by Edward Tomasz Napierala
     <trasz@FreeBSD.org> under sponsorship from	the FreeBSD Foundation.

FreeBSD	10.1		      September	12, 2014		  FreeBSD 10.1

NAME | SYNOPSIS | DESCRIPTION | FILES | EXIT STATUS | EXAMPLES | SEE ALSO | HISTORY | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=iscsictl&sektion=8&manpath=FreeBSD+10.1-RELEASE>

home | help