Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
GEOM(4)                FreeBSD Kernel Interfaces Manual                GEOM(4)

NAME
     GEOM -- modular disk I/O request transformation framework.

DESCRIPTION
     The GEOM framework provides an infrastructure in which "classes" can per-
     form transformations on disk I/O requests on their path from the upper
     kernel to the device drivers and back.

     Transformations in a GEOM context range from the simple geometric dis-
     placement performed in typical disk partitioning modules over RAID algo-
     rithms and device multipath resolution to full blown cryptographic pro-
     tection of the stored data.

     Compared to traditional "volume management", GEOM differs from most and
     in some cases all previous implementations in the following ways:

     +o   GEOM is extensible.  It is trivially simple to write a new class of
         transformation and it will not be given stepchild treatment.  If
         someone for some reason wanted to mount IBM MVS diskpacks, a class
         recognizing and configuring their VTOC information would be a trivial
         matter.

     +o   GEOM is topologically agnostic.  Most volume management implementa-
         tions have very strict notions of how classes can fit together, very
         often one fixed hierarchy is provided for instance subdisk - plex -
         volume.

     Being extensible means that new transformations are treated no differ-
     ently than existing transformations.

     Fixed hierarchies are bad because they make it impossible to express the
     intent efficiently.  In the fixed hierarchy above it is not possible to
     mirror two physical disks and then partition the mirror into subdisks,
     instead one is forced to make subdisks on the physical volumes and to
     mirror these two and two resulting in a much more complex configuration.
     GEOM on the other hand does not care in which order things are done, the
     only restriction is that cycles in the graph will not be allowed.

TERMINOLOGY and TOPOLOGY
     GEOM is quite object oriented and consequently the terminology borrows a
     lot of context and semantics from the OO vocabulary:

     A "class", represented by the data structure g_class implements one par-
     ticular kind of transformation.  Typical examples are MBR disk partition,
     BSD disklabel, and RAID5 classes.

     An instance of a class is called a "geom" and represented by the data
     structure "g_geom".  In a typical i386 FreeBSD system, there will be one
     geom of class MBR for each disk.

     A "provider", represented by the data structure "g_provider", is the
     front gate at which a geom offers service.  A provider is "a disk-like
     thing which appears in /dev" - a logical disk in other words.  All
     providers have three main properties: name, sectorsize and size.

     A "consumer" is the backdoor through which a geom connects to another
     geom provider and through which I/O requests are sent.

     The topological relationship between these entities are as follows:

     +o   A class has zero or more geom instances.

     +o   A geom has exactly one class it is derived from.

     +o   A geom has zero or more consumers.

     +o   A geom has zero or more providers.

     +o   A consumer can be attached to zero or one providers.

     +o   A provider can have zero or more consumers attached.

     All geoms have a rank-number assigned, which is used to detect and pre-
     vent loops in the acyclic directed graph.  This rank number is assigned
     as follows:

     1.   A geom with no attached consumers has rank=1

     2.   A geom with attached consumers has a rank one higher than the high-
          est rank of the geoms of the providers its consumers are attached
          to.

SPECIAL TOPOLOGICAL MANEUVERS
     In addition to the straightforward attach, which attaches a consumer to a
     provider, and detach, which breaks the bond, a number of special topolog-
     ical maneuvers exists to facilitate configuration and to improve the
     overall flexibility.

     TASTING is a process that happens whenever a new class or new provider is
     created and it provides the class a chance to automatically configure an
     instance on providers, which it recognize as its own.  A typical example
     is the MBR disk-partition class which will look for the MBR table in the
     first sector and if found and validated it will instantiate a geom to
     multiplex according to the contents of the MBR.

     A new class will be offered to all existing providers in turn and a new
     provider will be offered to all classes in turn.

     Exactly what a class does to recognize if it should accept the offered
     provider is not defined by GEOM, but the sensible set of options are:

     +o   Examine specific data structures on the disk.

     +o   Examine properties like sectorsize or mediasize for the provider.

     +o   Examine the rank number of the provider's geom.

     +o   Examine the method name of the provider's geom.

     ORPHANIZATION is the process by which a provider is removed while it
     potentially is still being used.

     When a geom orphans a provider, all future I/O requests will "bounce" on
     the provider with an error code set by the geom.  Any consumers attached
     to the provider will receive notification about the orphanization when
     the eventloop gets around to it, and they can take appropriate action at
     that time.

     A geom which came into being as a result of a normal taste operation
     should selfdestruct unless it has a way to keep functioning lacking the
     orphaned provider.  Geoms like diskslicers should therefore selfdestruct
     whereas RAID5 or mirror geoms will be able to continue, as long as they
     do not loose quorum.

     When a provider is orphaned, this does not necessarily result in any
     immediate change in the topology: any attached consumers are still
     attached, any opened paths are still open, any outstanding I/O requests
     are still outstanding.

     The typical scenario is
           +o   A device driver detects a disk has departed and orphans the
               provider for it.
           +o   The geoms on top of the disk receive the orphanization event
               and orphans all their providers in turn.  Providers, which are
               not attached to, will typically self-destruct right away.  This
               process continues in a quasi-recursive fashion until all rele-
               vant pieces of the tree has heard the bad news.
           +o   Eventually the buck stops when it reaches geom_dev at the top
               of the stack.
           +o   Geom_dev will call destroy_dev(9) to stop any more request from
               coming in.  It will sleep until all (if any) outstanding I/O
               requests have been returned.  It will explicitly close (ie:
               zero the access counts), a change which will propagate all the
               way down through the mesh.  It will then detach and destroy its
               geom.
           +o   The geom whose provider is now attached will destroy the
               provider, detach and destroy its consumer and destroy its geom.
           +o   This process percolates all the way down through the mesh,
               until the cleanup is complete.

     While this approach seems byzantine, it does provide the maximum flexi-
     bility and robustness in handling disappearing devices.

     The one absolutely crucial detail to be aware is that if the device
     driver does not return all I/O requests, the tree will not unravel.

     SPOILING is a special case of orphanization used to protect against stale
     metadata.  It is probably easiest to understand spoiling by going through
     an example.

     Imagine a disk, "da0" on top of which a MBR geom provides "da0s1" and
     "da0s2" and on top of "da0s1" a BSD geom provides "da0s1a" through
     "da0s1e", both the MBR and BSD geoms have autoconfigured based on data
     structures on the disk media.  Now imagine the case where "da0" is opened
     for writing and those data structures are modified or overwritten: Now
     the geoms would be operating on stale metadata unless some notification
     system can inform them otherwise.

     To avoid this situation, when the open of "da0" for write happens, all
     attached consumers are told about this, and geoms like MBR and BSD will
     selfdestruct as a result.  When "da0" is closed again, it will be offered
     for tasting again and if the data structures for MBR and BSD are still
     there, new geoms will instantiate themselves anew.

     Now for the fine print:

     If any of the paths through the MBR or BSD module were open, they would
     have opened downwards with an exclusive bit rendering it impossible to
     open "da0" for writing in that case and conversely the requested exclu-
     sive bit would render it impossible to open a path through the MBR geom
     while "da0" is open for writing.

     From this it also follows that changing the size of open geoms can only
     be done with their cooperation.

     Finally: the spoiling only happens when the write count goes from zero to
     non-zero and the retasting only when the write count goes from non-zero
     to zero.

     INSERT/DELETE are a very special operation which allows a new geom to be
     instantiated between a consumer and a provider attached to each other and
     to remove it again.

     To understand the utility of this, imagine a provider with being mounted
     as a file system.  Between the DEVFS geoms consumer and its provider we
     insert a mirror module which configures itself with one mirror copy and
     consequently is transparent to the I/O requests on the path.  We can now
     configure yet a mirror copy on the mirror geom, request a synchroniza-
     tion, and finally drop the first mirror copy.  We have now in essence
     moved a mounted file system from one disk to another while it was being
     used.  At this point the mirror geom can be deleted from the path again,
     it has served its purpose.

     CONFIGURE is the process where the administrator issues instructions for
     a particular class to instantiate itself.  There are multiple ways to
     express intent in this case, a particular provider can be specified with
     a level of override forcing for instance a BSD disklabel module to attach
     to a provider which was not found palatable during the TASTE operation.

     Finally IO is the reason we even do this: it concerns itself with sending
     I/O requests through the graph.

     I/O REQUESTS represented by struct bio, originate at a consumer, are
     scheduled on its attached provider, and when processed, returned to the
     consumer.  It is important to realize that the struct bio which enters
     through the provider of a particular geom does not "come out on the other
     side".  Even simple transformations like MBR and BSD will clone the
     struct bio, modify the clone, and schedule the clone on their own con-
     sumer.  Note that cloning the struct bio does not involve cloning the
     actual data area specified in the IO request.

     In total four different IO requests exist in GEOM: read, write, delete,
     and get attribute.

     Read and write are self explanatory.

     Delete indicates that a certain range of data is no longer used and that
     it can be erased or freed as the underlying technology supports.  Tech-
     nologies like flash adaptation layers can arrange to erase the relevant
     blocks before they will become reassigned and cryptographic devices may
     want to fill random bits into the range to reduce the amount of data
     available for attack.

     It is important to recognize that a delete indication is not a request
     and consequently there is no guarantee that the data actually will be
     erased or made unavailable unless guaranteed by specific geoms in the
     graph.  If "secure delete" semantics are required, a geom should be
     pushed which converts delete indications into (a sequence of) write
     requests.

     Get attribute supports inspection and manipulation of out-of-band
     attributes on a particular provider or path.  Attributes are named by
     ascii strings and they will be discussed in a separate section below.

     (stay tuned while the author rests his brain and fingers: more to come.)

DIAGNOSTICS
     Several flags are provided for tracing GEOM operations and unlocking pro-
     tection mechanisms via the kern.geom.debugflags sysctl.  All of these
     flags are off by default, and great care should be taken in turning them
     on.

     0x01 (G_T_TOPOLOGY)
           Provide tracing of topology change events.

     0x02 (G_T_BIO)
           Provide tracing of buffer I/O requests.

     0x04 (G_T_ACCESS)
           Provide tracing of access check controls.

     0x08 (unused)

     0x10 (allow foot shooting)
           Allow writing to Rank 1 providers.  This would, for example, allow
           the super-user to overwrite the MBR on the root disk or write ran-
           dom sectors elsewhere to a mounted disk.  The implications are
           obvious.

     0x20 (G_T_DETAILS)
           This appears to be unused at this time.

     0x40 (G_F_DISKIOCTL)
           This appears to be unused at this time.

     0x80 (G_F_CTLDUMP)
           Dump contents of gctl requests.

HISTORY
     This software was developed for the FreeBSD Project by Poul-Henning Kamp
     and NAI Labs, the Security Research Division of Network Associates, Inc.
     under DARPA/SPAWAR contract N66001-01-C-8035 ("CBOSS"), as part of the
     DARPA CHATS research program.

     The first precursor for GEOM was a gruesome hack to Minix 1.2 and was
     never distributed.  An earlier attempt to implement a less general scheme
     in FreeBSD never succeeded.

AUTHORS
     Poul-Henning Kamp <phk@FreeBSD.org>

FreeBSD 6.2                     March 27, 2002                     FreeBSD 6.2

NAME | DESCRIPTION | TERMINOLOGY and TOPOLOGY | SPECIAL TOPOLOGICAL MANEUVERS | DIAGNOSTICS | HISTORY | AUTHORS

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=geom&sektion=4&manpath=FreeBSD+6.2-RELEASE>

home | help