Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
FXP(4)		       FreeBSD Kernel Interfaces Manual			FXP(4)

NAME
     fxp -- Intel EtherExpress Pro/100B	ethernet device	driver

SYNOPSIS
     device miibus
     device fxp

DESCRIPTION
     The fxp driver provides support for the EtherExpress Pro/10, InBusiness
     10/100, Pro/100 B,	Pro/100+, Pro/100 VE, Pro/100 M, and Pro/100 S PCI
     Fast Ethernet adapters based on the Intel i82557, i82558, i82559, i82550,
     or	i82562 Ethernet	chips.	Many on-board network interfaces on Intel
     motherboards use these chips and are also supported.

     The fxp driver supports the following media types:

     autoselect		   Enable autoselection	of the media type and options

     10baseT/UTP	   Set 10Mbps operation

     100baseTX		   Set 100Mbps (fast ethernet) operation

     The fxp driver supports the following media options:

     full-duplex	   Set full duplex operation

     Note that 100baseTX media type is not available on	the Pro/10.  For fur-
     ther information on configuring this device, see ifconfig(8).

     The fxp driver also supports a special link option:

     link0  Some chip revisions	have loadable microcode	which can be used to
	    reduce the interrupt load on the host cpu.	Not all	boards have
	    support microcode support.	Setting	the link0 flag with
	    ifconfig(8)	will download the microcode to the chip	if it is
	    available.

DIAGNOSTICS
     fxp%d: couldn't map memory	 A fatal initialization	error has occurred.

     fxp%d: couldn't map interrupt  A fatal initialization error has occurred.

     fxp%d: Failed to malloc memory  There are not enough mbuf's available for
     allocation.

     fxp%d: device timeout  The	device has stopped responding to the network,
     or	there is a problem with	the network connection (cable).

     fxp%d: Microcode loaded, int_delay: %d usec  bundle_max: %d  The chip has
     successfully downloaded the microcode, and	changed	the parameterized val-
     ues to the	given settings.

SEE ALSO
     arp(4), miibus(4),	netintro(4), ng_ether(4), ifconfig(8)

HISTORY
     The fxp device driver first appeared in FreeBSD 2.1.

AUTHORS
     The fxp device driver was written by David	Greenman.  This	manual page
     was written by David E. O'Brien.

FreeBSD	9.2		       January 19, 1997			   FreeBSD 9.2

NAME | SYNOPSIS | DESCRIPTION | DIAGNOSTICS | SEE ALSO | HISTORY | AUTHORS

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=fxp&sektion=4&manpath=FreeBSD+4.8-RELEASE>

home | help