FreeBSD Man Pages
home | helpFXP(4) FreeBSD Kernel Interfaces Manual FXP(4) NAME fxp -- Intel EtherExpress PRO/100 Ethernet device driver SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: device miibus device fxp Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): if_fxp_load="YES" DESCRIPTION The fxp driver provides support for Ethernet adapters based on the Intel i82557, i82558, i82559, i82550, and i82562 chips. The driver supports TCP/UDP/IP checksum offload for both transmit and receive on i82550 and i82551. On i82559 only TCP/UDP checksum offload for receive is sup- ported. TCP segmentation offload (TSO) for IPv4 as well as VLAN hardware tag insertion/stripping is supported on i82550 and i82551. Wake On Lan (WOL) support is provided on all controllers except i82557, i82259ER and early i82558 revisions. The fxp driver supports the following media types: autoselect Enable autoselection of the media type and options 10baseT/UTP Set 10Mbps operation 100baseTX Set 100Mbps (Fast Ethernet) operation The fxp driver supports the following media options: full-duplex Set full duplex operation Note that 100baseTX media type is not available on the Pro/10. For fur- ther information on configuring this device, see ifconfig(8). The fxp driver supports reception and transmission of extended frames for vlan(4). This capability of fxp can be controlled by means of the vlanmtu parameter to ifconfig(8). The fxp driver also supports a special link option: link0 Some chip revisions have loadable microcode which can be used to reduce the interrupt load on the host cpu. Not all boards have microcode support. Setting the link0 flag with ifconfig(8) will download the microcode to the chip if it is available. HARDWARE Adapters supported by the fxp driver include: +o Intel EtherExpress PRO/10 +o Intel InBusiness 10/100 +o Intel PRO/100B / EtherExpressPRO/100 B PCI Adapter +o Intel PRO/100+ Management Adapter +o Intel PRO/100 VE Desktop Adapter +o Intel PRO/100 VM Network Connection +o Intel PRO/100 M Desktop Adapter +o Intel PRO/100 S Desktop, Server and Dual-Port Server Adapters +o Contec C-NET(PI)-100TX (PC-98) +o NEC PC-9821Ra20, Rv20, Xv13, Xv20 internal 100Base-TX (PC-98) +o NEC PC-9821X-B06 (PC-98) +o Many on-board network interfaces on Intel motherboards DIAGNOSTICS fxp%d: couldn't map memory A fatal initialization error has occurred. fxp%d: couldn't map interrupt A fatal initialization error has occurred. fxp%d: Failed to malloc memory There are not enough mbuf's available for allocation. fxp%d: device timeout The device has stopped responding to the network, or there is a problem with the network connection (cable). fxp%d: Microcode loaded, int_delay: %d usec bundle_max: %d The chip has successfully downloaded the microcode, and changed the parameterized val- ues to the given settings. SEE ALSO altq(4), arp(4), miibus(4), netintro(4), ng_ether(4), polling(4), vlan(4), ifconfig(8) HISTORY The fxp device driver first appeared in FreeBSD 2.1. AUTHORS The fxp device driver was written by David Greenman. It has then been updated to use the busdma API and made endian-clean by Maxime Henrion. This manual page was written by David E. O'Brien. FreeBSD 7.2 December 15, 2008 FreeBSD 7.2
NAME | SYNOPSIS | DESCRIPTION | HARDWARE | DIAGNOSTICS | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=fxp&sektion=4&manpath=FreeBSD+8.0-RELEASE>