Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
CH(4)		       FreeBSD Kernel Interfaces Manual			 CH(4)

NAME
     ch	-- SCSI	media-changer (juke box) driver

SYNOPSIS
     device ch
     device ch1	target 4 unit 0

DESCRIPTION
     The ch driver provides support for	a SCSI media changer.  It allows many
     slots of media to be multiplexed between a	number of drives.  The changer
     device may	optionally be equipped with a bar code reader, which reads
     label informationen attached to the media.

     A SCSI adapter must also be separately configured into the	system before
     a SCSI changer can	be configured.

     As	the SCSI adapter is probed during boot,	the SCSI bus is	scanned	for
     devices.  Any devices found which answer as 'Changer' type	devices	will
     be	'attached' to the ch driver.  In FreeBSD releases prior	to 2.1,	the
     first found will be attached as ch0 and the next, ch1 etc.	 Beginning in
     2.1 it is possible	to specify what	ch unit	a device should	come on	line
     as; refer to scsi(4) for details on kernel	configuration.

KERNEL CONFIGURATION
     In	configuring, if	an optional count is given in the specification, that
     number of SCSI media changers are configured; Most	storage	for them is
     allocated only when found so a large number of configured devices is
     cheap.  (once the first has included the driver).

IOCTLS
     User mode programs	communicate with the changer driver through a number
     of	ioctls which are described below.  Changer element addresses used in
     the communcation between the kernel and the changer device	are mapped to
     zero-based	logical	addresses.  Element types are specified	as follows:

     CHET_MT  Medium transport element (picker).

     CHET_ST  Storage element (slot).

     CHET_IE  Import/export element (portal).

     CHET_DT  Data transfer element (drive).

     The following ioctl(2) calls apply	to the changer.	 They are defined in
     the header	file <sys/chio.h>.

     CHIOMOVE	   (struct changer_move) Move a	medium from one	element	to
		   another (MOVE MEDIUM) using the current picker.  The	source
		   and destination elements are	specified in a changer_move
		   structure, which includes at	least the following fields:

			 u_int cm_fromtype; /* element type to move from */
			 u_int cm_fromunit; /* logical unit of from element */
			 u_int cm_totype;   /* element type to move to */
			 u_int cm_tounit;   /* logical unit of to element */
			 u_int cm_flags;    /* misc. flags */
		   If the CM_INVERT in the cm_flags field is set, the medium
		   changer is instructed to flip the medium while moving it.

     CHIOEXCHANGE  (struct changer_exchange) Move the medium located in	the
		   source element to the first destination element, and	move
		   the medium that had been in the first destination element
		   to the second destination element.  In case of a simple
		   exchange, the source	and second destination elements	should
		   be the same.	 The current picker is used to perform the
		   operation.  The addresses of	the affected elements is spec-
		   ified to the	ioctl in a changer_exchange structure which
		   includes at least the following fields:

			 u_int ce_srctype;	  /* element type of source */
			 u_int ce_srcunit;	  /* logical unit of source */
			 u_int ce_fdsttype; /* element type of first destination */
			 u_int ce_fdstunit; /* logical unit of first destination */
			 u_int ce_sdsttype; /* element type of second destination */
			 u_int ce_sdstunit; /* logical unit of second destination */
			 u_int ce_flags;  /* misc. flags */
		   In ce_flags,	CM_INVERT1 and/or CM_INVERT2 may be set	to
		   flip	the first or second medium during the exchange opera-
		   tion, respectively.

		   This	operation is untested.

     CHIOPOSITION  (struct changer_position) Position the current picker in
		   front of the	specified element.  The	element	is specified
		   with	a changer_position structure, which includes at	least
		   the following elements:

			 u_int cp_type;	 /* element type */
			 u_int cp_unit;	 /* logical unit of element */
			 u_int cp_flags; /* misc. flags	*/
		   The cp_flags	field may be set to CP_INVERT to invert	the
		   picker during the operation.

     CHIOGPICKER   (int) Return	the logical address of the current picker.

     CHIOSPICKER   (int) Select	the picker specified by	the given logical
		   address.

     CHIOGPARAMS   (struct changer_params) Return the configuration parameters
		   for the media changer.  This	ioctl fills the	changer_params
		   structure passed by the user	with at	least the following
		   fields:

			 u_int cp_npickers; /* number of pickers */
			 u_int cp_nslots;   /* number of slots */
			 u_int cp_nportals; /* number of import/export portals */
			 u_int cp_ndrives;  /* number of drives	*/

		   This	call can be used by applications to query the dimen-
		   sions of the	jukebox	before using the CHIGSTATUS ioctl to
		   query the jukebox' status.

     CHIOIELEM	   Perform the INITIALIZE ELEMENT STATUS call on the media
		   changer device.  This forces	the media changer to update
		   its internal	status information with	respect	to loaded
		   media.  It also scans any barcode labels provided that it
		   has a label reader.	The ch driver's	status is not affected
		   by this call.

     CHIOGSTATUS   (struct changer_element_status_request) Perform the READ
		   ELEMENT STATUS call on the media changer device.  This call
		   reads the element status information	of the media changer
		   and converts	it to an array of changer_element_status
		   structures.

		   With	each call to CHIOGSTATUS, the status of	one or more
		   elements of one type	may be queried.

		   The application passes a changer_element_status_request
		   structure to	the ch driver which contains the following
		   fields:

			 u_int				cesr_element_type;
			 u_int				cesr_element_base;
			 u_int				cesr_element_count;
			 u_int				cesr_flags;
			 struct	changer_element_status *cesr_element_status;

		   This	structure is read by the driver	to determine the type,
		   logical base	address	and number of elements for which
		   information is to be	returned in the	array of changer_ele-
		   ment_status structures pointed to by	the cesr_element_sta-
		   tus field.  The application must allocate enough memory for
		   cesr_element_count status structures	(see below).  The
		   cesr_flags can optionally be	set to CESR_VOLTAGS to indi-
		   cate	that volume tag	(bar code) information is to be	read
		   from	the jukebox and	returned.

		   The cesr_element_base and cesr_element_count	fields must be
		   valid with respect to the physical configuration of the
		   changer.  If	they are not, the CHIOGSTATUS ioctl returns
		   the EINVAL error code.

		   The information about the elements is returned in an	array
		   of changer_element_status structures.  This structure
		   include at least the	following fields:

			 u_int		  ces_addr;	 /* element address in media changer */
			 u_char		  ces_flags;	 /* see	CESTATUS definitions below */
			 u_char		  ces_sensecode; /* additional sense code for element */
			 u_char		  ces_sensequal; /* additional sense code qualifier */
			 u_char		  ces_invert;	 /* invert bit */
			 u_char		  ces_svalid;	 /* source address (ces_source)	valid */
			 u_short	  ces_source;	 /* source address of medium */
			 changer_voltag_t ces_pvoltag;	 /* primary volume tag */
			 changer_voltag_t ces_avoltag;	 /* alternate volume tag */
			 u_char		  ces_idvalid;	 /* ces_scsi_id	is valid */
			 u_char		  ces_scsi_id;	 /* SCSI id of element (if ces_idvalid is nonzero) */
			 u_char		  ces_lunvalid;	 /* ces_scsi_lun is valid */
			 u_char		  ces_scsi_lun;	 /* SCSI lun of	elemtne	(if ces_lunvalid is nonzero) */

		   The ces_addr	field contains the address of the element in
		   the coordinate system of the	media changer.	It is not used
		   by the driver, and should be	used for diagnostic purposes
		   only.

		   The following flags are defined for the ces_flags field:

		   CESTATUS_FULL    A medium is	present.

		   CESTATUS_IMPEXP  The	medium has been	deposited by the oper-
				    ator (and not by a picker).

		   CESTATUS_EXCEPT  The	element	is in an exceptional state
				    (e.g. invalid barcode label, barcode not
				    yet	scanned).

		   CESTATUS_ACCESS  The	element	is accessible by the picker.

		   CESTATUS_EXENAB  The	element	supports medium	export.

		   CESTATUS_INENAB  The	element	supports medium	import.

		   Note	that not all flags are valid for all element types.

NOTES
     This version of the ch driver has been tested with	a DEC TZ875 (5 slot,
     one DLT drive) and	a and a	Breece Hill Q47	(60 slot, four DLT drives,
     barcode reader).

     Many of the features the ch driver	supports are not thouroghly tested due
     to	the fact that the devices available for	testing	do not support the
     necessary commands.  This is true for alternate volume tags, media	flip-
     ping, import/export element handling, multiple picker operation and other
     things.

AUTHORS
     The ch driver was written by Jason	R. Thorpe <thorpej@and.com> for	And
     Communications, http://www.and.com/.  It was added	to the system by
     Stefan Grefen <grefen@goofy.zdv.uni-mainz.de> who apparently had such a
     device.  It was ported to CAM by Kenneth Merry <ken@FreeBSD.org>.	It was
     updated to	support	volume tags by Hans Huebner <hans@artcom.de>.

FILES
     /dev/ch[0-9]  device entries

DIAGNOSTICS
     If	the media changer does not support features requested by the ch
     driver, it	will produce both console error	messages and failure return
     codes to the ioctls described here.

SEE ALSO
     chio(1), cd(4), da(4), sa(4)

HISTORY
     The ch driver appeared in 386BSD 0.1.

FreeBSD	10.1			 May 14, 1998			  FreeBSD 10.1

NAME | SYNOPSIS | DESCRIPTION | KERNEL CONFIGURATION | IOCTLS | NOTES | AUTHORS | FILES | DIAGNOSTICS | SEE ALSO | HISTORY

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=ch&sektion=4&manpath=FreeBSD+4.7-RELEASE>

home | help