Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
CH(4)                  FreeBSD Kernel Interfaces Manual                  CH(4)

NAME
     ch -- SCSI media-changer (juke box) driver

SYNOPSIS
     device ch
     device ch1 target 4 unit 0

DESCRIPTION
     The ch driver provides support for a SCSI media changer.  It allows many
     slots of media to be multiplexed between a number of drives.  The changer
     device may optionally be equipped with a bar code reader, which reads
     label informationen attached to the media.

     A SCSI adapter must also be separately configured into the system before
     a SCSI changer can be configured.

     As the SCSI adapter is probed during boot, the SCSI bus is scanned for
     devices.  Any devices found which answer as 'Changer' type devices will
     be 'attached' to the ch driver.  In FreeBSD releases prior to 2.1, the
     first found will be attached as ch0 and the next, ch1 etc.  Beginning in
     2.1 it is possible to specify what ch unit a device should come on line
     as; refer to scsi(4) for details on kernel configuration.

KERNEL CONFIGURATION
     In configuring, if an optional count is given in the specification, that
     number of SCSI media changers are configured; Most storage for them is
     allocated only when found so a large number of configured devices is
     cheap.  (once the first has included the driver).

IOCTLS
     User mode programs communicate with the changer driver through a number
     of ioctls which are described below.  Changer element addresses used in
     the communcation between the kernel and the changer device are mapped to
     zero-based logical addresses.  Element types are specified as follows:

     CHET_MT  Medium transport element (picker).

     CHET_ST  Storage element (slot).

     CHET_IE  Import/export element (portal).

     CHET_DT  Data transfer element (drive).

     The following ioctl(2) calls apply to the changer.  They are defined in
     the header file <sys/chio.h>.

     CHIOMOVE      (struct changer_move) Move a medium from one element to
                   another (MOVE MEDIUM) using the current picker.  The source
                   and destination elements are specified in a changer_move
                   structure, which includes at least the following fields:

                         u_int cm_fromtype; /* element type to move from */
                         u_int cm_fromunit; /* logical unit of from element */
                         u_int cm_totype;   /* element type to move to */
                         u_int cm_tounit;   /* logical unit of to element */
                         u_int cm_flags;    /* misc. flags */
                   If the CM_INVERT in the cm_flags field is set, the medium
                   changer is instructed to flip the medium while moving it.

     CHIOEXCHANGE  (struct changer_exchange) Move the medium located in the
                   source element to the first destination element, and move
                   the medium that had been in the first destination element
                   to the second destination element.  In case of a simple
                   exchange, the source and second destination elements should
                   be the same.  The current picker is used to perform the
                   operation.  The addresses of the affected elements is spec-
                   ified to the ioctl in a changer_exchange structure which
                   includes at least the following fields:

                         u_int ce_srctype;        /* element type of source */
                         u_int ce_srcunit;        /* logical unit of source */
                         u_int ce_fdsttype; /* element type of first destination */
                         u_int ce_fdstunit; /* logical unit of first destination */
                         u_int ce_sdsttype; /* element type of second destination */
                         u_int ce_sdstunit; /* logical unit of second destination */
                         u_int ce_flags;  /* misc. flags */
                   In ce_flags, CM_INVERT1 and/or CM_INVERT2 may be set to
                   flip the first or second medium during the exchange opera-
                   tion, respectively.

                   This operation is untested.

     CHIOPOSITION  (struct changer_position) Position the current picker in
                   front of the specified element.  The element is specified
                   with a changer_position structure, which includes at least
                   the following elements:

                         u_int cp_type;  /* element type */
                         u_int cp_unit;  /* logical unit of element */
                         u_int cp_flags; /* misc. flags */
                   The cp_flags field may be set to CP_INVERT to invert the
                   picker during the operation.

     CHIOGPICKER   (int) Return the logical address of the current picker.

     CHIOSPICKER   (int) Select the picker specified by the given logical
                   address.

     CHIOGPARAMS   (struct changer_params) Return the configuration parameters
                   for the media changer.  This ioctl fills the changer_params
                   structure passed by the user with at least the following
                   fields:

                         u_int cp_npickers; /* number of pickers */
                         u_int cp_nslots;   /* number of slots */
                         u_int cp_nportals; /* number of import/export portals */
                         u_int cp_ndrives;  /* number of drives */

                   This call can be used by applications to query the dimen-
                   sions of the jukebox before using the CHIGSTATUS ioctl to
                   query the jukebox' status.

     CHIOIELEM     Perform the INITIALIZE ELEMENT STATUS call on the media
                   changer device.  This forces the media changer to update
                   its internal status information with respect to loaded
                   media.  It also scans any barcode labels provided that it
                   has a label reader.  The ch driver's status is not affected
                   by this call.

     CHIOGSTATUS   (struct changer_element_status_request) Perform the READ
                   ELEMENT STATUS call on the media changer device.  This call
                   reads the element status information of the media changer
                   and converts it to an array of changer_element_status
                   structures.

                   With each call to CHIOGSTATUS, the status of one or more
                   elements of one type may be queried.

                   The application passes a changer_element_status_request
                   structure to the ch driver which contains the following
                   fields:

                         u_int                          cesr_element_type;
                         u_int                          cesr_element_base;
                         u_int                          cesr_element_count;
                         u_int                          cesr_flags;
                         struct changer_element_status *cesr_element_status;

                   This structure is read by the driver to determine the type,
                   logical base address and number of elements for which
                   information is to be returned in the array of changer_ele-
                   ment_status structures pointed to by the cesr_element_sta-
                   tus field.  The application must allocate enough memory for
                   cesr_element_count status structures (see below).  The
                   cesr_flags can optionally be set to CESR_VOLTAGS to indi-
                   cate that volume tag (bar code) information is to be read
                   from the jukebox and returned.

                   The cesr_element_base and cesr_element_count fields must be
                   valid with respect to the physical configuration of the
                   changer.  If they are not, the CHIOGSTATUS ioctl returns
                   the EINVAL error code.

                   The information about the elements is returned in an array
                   of changer_element_status structures.  This structure
                   include at least the following fields:

                         u_int            ces_addr;      /* element address in media changer */
                         u_char           ces_flags;     /* see CESTATUS definitions below */
                         u_char           ces_sensecode; /* additional sense code for element */
                         u_char           ces_sensequal; /* additional sense code qualifier */
                         u_char           ces_invert;    /* invert bit */
                         u_char           ces_svalid;    /* source address (ces_source) valid */
                         u_short          ces_source;    /* source address of medium */
                         changer_voltag_t ces_pvoltag;   /* primary volume tag */
                         changer_voltag_t ces_avoltag;   /* alternate volume tag */
                         u_char           ces_idvalid;   /* ces_scsi_id is valid */
                         u_char           ces_scsi_id;   /* SCSI id of element (if ces_idvalid is nonzero) */
                         u_char           ces_lunvalid;  /* ces_scsi_lun is valid */
                         u_char           ces_scsi_lun;  /* SCSI lun of elemtne (if ces_lunvalid is nonzero) */

                   The ces_addr field contains the address of the element in
                   the coordinate system of the media changer.  It is not used
                   by the driver, and should be used for diagnostic purposes
                   only.

                   The following flags are defined for the ces_flags field:

                   CESTATUS_FULL    A medium is present.

                   CESTATUS_IMPEXP  The medium has been deposited by the oper-
                                    ator (and not by a picker).

                   CESTATUS_EXCEPT  The element is in an exceptional state
                                    (e.g. invalid barcode label, barcode not
                                    yet scanned).

                   CESTATUS_ACCESS  The element is accessible by the picker.

                   CESTATUS_EXENAB  The element supports medium export.

                   CESTATUS_INENAB  The element supports medium import.

                   Note that not all flags are valid for all element types.

NOTES
     This version of the ch driver has been tested with a DEC TZ875 (5 slot,
     one DLT drive) and a and a Breece Hill Q47 (60 slot, four DLT drives,
     barcode reader).

     Many of the features the ch driver supports are not thouroghly tested due
     to the fact that the devices available for testing do not support the
     necessary commands.  This is true for alternate volume tags, media flip-
     ping, import/export element handling, multiple picker operation and other
     things.

AUTHORS
     The ch driver was written by Jason R. Thorpe <thorpej@and.com> for And
     Communications, http://www.and.com/.  It was added to the system by
     Stefan Grefen <grefen@goofy.zdv.uni-mainz.de> who apparently had such a
     device.  It was ported to CAM by Kenneth Merry <ken@FreeBSD.org>.  It was
     updated to support volume tags by Hans Huebner <hans@artcom.de>.

FILES
     /dev/ch[0-9]  device entries

DIAGNOSTICS
     If the media changer does not support features requested by the ch
     driver, it will produce both console error messages and failure return
     codes to the ioctls described here.

SEE ALSO
     chio(1), cd(4), da(4), sa(4)

HISTORY
     The ch driver appeared in 386BSD 0.1.

FreeBSD 4.10                     May 14, 1998                     FreeBSD 4.10

NAME | SYNOPSIS | DESCRIPTION | KERNEL CONFIGURATION | IOCTLS | NOTES | AUTHORS | FILES | DIAGNOSTICS | SEE ALSO | HISTORY

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=ch&sektion=4&manpath=FreeBSD+4.10-RELEASE>

home | help