Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
BFE(4)		       FreeBSD Kernel Interfaces Manual			BFE(4)

NAME
     bfe -- Broadcom BCM4401 Ethernet Device Driver

SYNOPSIS
     To	compile	this driver into the kernel, place the following lines in your
     kernel configuration file:

	   device miibus
	   device bfe

     Alternatively, to load the	driver as a module at boot time, place the
     following line in loader.conf(5):

	   if_bfe_load="YES"

DESCRIPTION
     The bfe driver provides support for Broadcom BCM4401 based	Fast Ethernet
     adapters.

     The bfe driver supports the following media types:

     autoselect	  Enable autoselection of the media type and options.

     10baseT/UTP  Set 10Mbps operation.

     100baseTX	  Set 100Mbps (Fast Ethernet) operation.

     The bfe driver supports the following media options:

     full-duplex  Set full duplex operation.

     For further information on	configuring this device, see ifconfig(8).

DIAGNOSTICS
     bfe%d: couldn't map memory	 A fatal initialization	error has occurred.

     bfe%d: couldn't map interrupt  A fatal initialization error has occurred.

     bfe%d: failed to allocate DMA resources  There are	not enough mbufs
     available for allocation.

     bfe%d: watchdog timeout --	resetting  The device has stopped responding
     to	the network, or	there is a problem with	the network connection
     (cable).

SEE ALSO
     altq(4), arp(4), miibus(4), netintro(4), ng_ether(4), ifconfig(8)

HISTORY
     The bfe device driver first appeared in FreeBSD 5.1.

AUTHORS
     The bfe device driver was written by Stuart Walsh and Duncan Barclay.
     This manual page was written by Stuart Walsh.

FreeBSD	9.2			 July 16, 2005			   FreeBSD 9.2

NAME | SYNOPSIS | DESCRIPTION | DIAGNOSTICS | SEE ALSO | HISTORY | AUTHORS

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=bfe&sektion=4&manpath=FreeBSD+7.2-RELEASE>

home | help