Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
ATM(8)                                                                  ATM(8)

NAME
       atm - user configuration and display command for HARP ATM interface

SYNOPSIS
       Interface management subcommands:
            atm attach <interface> <sigmgr>
            atm detach <interface>
            atm set MAC <interface> <MAC/ESI address>
            atm set netif <interface> <prefix> <count>
            atm set prefix <interface> <NSAP prefix>
            atm show config [<interface>]
            atm show interface [<interface>]
            atm show netif [<netif>]
            atm  show  stats  interface [<interface> [phy | dev | atm | aal0 |
                 aal4 | aal5 | driver]]

       VCC management subcommands:
            atm add PVC <interface> <vpi> <vci> <aal> <encaps> <owner> ...
            atm delete PVC <interface> <vpi> <vci>
            atm delete SVC <interface> <vpi> <vci>
            atm show stats VCC [<interface> [<vpi> [<vci>]]]
            atm show VCC [<interface> [<vpi> [<vci>] | SVC | PVC]]

       IP management subcommands:
            atm add ARP [<netif>] <host> <ATM address>
            atm add PVC <interface> <vpi>  <vci>  <aal>  <encaps>  IP  <netif>
                 [<host> | dynamic] <traffic> <params> ...
            atm delete ARP [<netif>] <host>
            atm  set arpserver <netif> <ATM address> | local [<IP prefix> ...]
            atm show ARP [<host>]
            atm show arpserver [<netif>]
            atm show IPVCC [<host> | <netif>]

       Miscellaneous subcommands:
            atm help
            atm show version

DESCRIPTION
       atm configures and displays the status of the Host ATM  Research  Plat-
       form  (HARP)  networking  software.   The subcommands fall into several
       categories:

       Interface management subcommands allow manipulation of the  ATM  inter-
       face.   Functions  include  assigning a signalling manager to an inter-
       face, setting the ATM address, associating network interfaces  with  an
       interface, and displaying information about interfaces.

       VCC  management subcommands allow for managing ATM virtual channel con-
       nections (VCCs).  Functions include opening and closing VCCs  and  dis-
       playing information about them.

       IP  management  subcommands allow for managing the interface between IP
       and the ATM software.  Functions include  displaying  and  manipulating
       the  ATMARP  cache,  opening a PVC connected to IP, assigning an ATMARP
       server to a network interface,  and  displaying  information  about  IP
       VCCs.

       Miscellaneous  subcommands  allow for displaying the version of the ATM
       software and for getting help with the atm command.

   Signalling Managers
       The signalling manager is responsible for the opening  and  closing  of
       VCCs.  Four signalling managers are supported:

            PVC - for PVCs only,
            SPANS - supports SPANS, FORE's proprietary signalling protocol,
            UNI  3.0  -  supports the signalling protocol from The ATM Forum's
                 ATM User-Network Interface Specification, Version 3.0.
            UNI 3.1 - supports the signalling protocol from  The  ATM  Forum's
                 ATM User-Network Interface Specification, Version 3.1.

       All  four  signalling  managers support the opening and closing of PVCs
       (see the add and delete subcommands).

       A signalling manager must be attached to a physical interface (see  the
       attach subcommand) before any VCCs can be created on the interface.

   Physical and Network Interfaces
       Two  types of interfaces are supported: physical interfaces and network
       interfaces.  A  physical  interface  represents  a  physical  point  of
       attachment  to an ATM network.  A physical interface has an ATM address
       associated with it, except when  the  PVC-only  signalling  manager  is
       being used.

       A network interface is a logical interface.  One or more network inter-
       faces are associated with a physical interface;  each network interface
       has  an  IP address associated with it.  For UNI-controlled interfaces,
       there can be up to 256 network interfaces associated  with  a  physical
       interface.  In this case, the correspondence between the network inter-
       face and the ATM address is determined by the selector field (the  last
       byte)  of  the  physical  interface's ATM address.  For PVC-only inter-
       faces, there can be up to 256 logical interfaces associated  with  each
       physical  interface.  For interfaces controlled by the SPANS signalling
       manager, there must be one and only one  network  interface  associated
       with each physical interface.

   Keyword and Documentation Conventions
       Command  and  subcommand  keywords  can be abbreviated by simply giving
       enough of the first part of the keyword to make it unique.   Thus,  atm
       sh v gives the same result as atm show vcc.

       All keywords are case-insensitive.

       Where a host address needs to be given to the atm command, either a DNS
       name or an IP address in dotted decimal format can be used.

       ATM addresses are specified as strings of hex digits, with an  optional
       leading  "0x".   Fields within the address may be separated by periods,
       but periods are for readability only and are ignored.  SPANS  addresses
       are  8  bytes long, while NSAP-format addresses are 20 bytes long.  The
       full address, including any leading zeroes, must be given.   For  exam-
       ple:
            0x47.0005.80.ffe100.0000.f21a.0170.0020481a0170.00 (NSAP format)
            0x00000010.f2050aa9 (SPANS format)

SUBCOMMANDS
   Interface Management Subcommands:
       atm add PVC _interface_ _vpi_ _vci_ _aal_ _encaps_ _owner_ ...

       the  format  of the add PVC subcommand varies depending on the owner of
       the PVC.  See the description under "IP Management Subcommands."

       atm attach _interface_ _sigmgr_

       where:
            _interface_ specifies the physical interface  to  which  the  sig-
                 nalling manager is to be attached,
            _sigmgr_  specifies  which  signalling  manager is to be attached.
                 Valid choices are "SIGPVC", "SPANS", "UNI30", and "UNI31".

       This command attaches a signalling manager to an interface.  Until this
       is  done, VCCs cannot be opened or closed.  Only one signalling manager
       at a time can be attached to an interface.

       atm detach _interface_

       where:
            _interface_ specifies the physical interface whose signalling man-
                 ager is to be detached.

       This command detaches a signalling manager from an interface.  All VCCs
       that the signalling manager has created will be closed, and no new VCCs
       can be created until a signalling manager (either the same or a differ-
       ent one) is attached again.

       atm set MAC _interface_ _MAC/ESI address_

       where:
            _interface_ specifies the physical interface whose MAC address  is
                 to be set,
            _MAC/ESI  address_  specifies  the  6-byte  MAC  part  of the NSAP
                 address for the interface.  The MAC address is specified as a
                 string  of  12  hexadecimal  digits  with an optional leading
                 "0x".  Fields in the address may be separated by periods.

       This command sets the MAC address for a UNI-controlled interface.   The
       first  13 bytes (the prefix) of the 20-byte NSAP-format address are set
       by the atm set prefix command or the ILMI daemon (ilmid (8)), the  next
       6  bytes (the End System Identifier (ESI)) are set by this command, and
       the last byte (the selector) will be determined by which network inter-
       face is to be associated with the address.

       The  atm set MAC command can be used to override the MAC address in the
       interface hardware.

       atm set netif _interface_ _prefix_ _count_

       where:
            _interface_ specifies the  physical  interface  that  the  network
                 interface(s) are to be associated with,
            _prefix_  specifies  the  invariant  part of the network interface
                 name,
            _count_ specifies the number of network interface to be created.

       This command creates one or more network interfaces and associates them
       with the specified physical interface.  The network interface names are
       determined by the prefix and the count.  The names will be of the  form
       <prefix><nn>, where <prefix> is the prefix specified in the set subcom-
       mand and <nn> is a number in the range 0 - <count>-1.  For example, the
       command:

            atm set netif hfa0 ni 2

       would  create  two network interfaces, named ni0 and ni1, and associate
       them with physical interface hfa0.

       atm set prefix _interface_ _NSAP prefix_

       where:
            _interface_ specifies the physical interface whose NSAP prefix  is
                 to be set,
            _NSAP prefix_ specifies the first 13 bytes of the NSAP address for
                 the interface.  The prefix is specified as a string of  hexa-
                 decimal  digits with an optional leading "0x".  Fields in the
                 prefix may be separated by periods.

       This command sets the address  for  a  UNI-controlled  interface.   The
       first  13 bytes (the prefix) of the 20-byte NSAP-format address are set
       by this command, the next 6 bytes (the  End  System  Identifier  (ESI))
       will be the MAC address taken from the physical interface or set by the
       set MAC subcommand, and the last byte (the selector) will be determined
       by which network interface is to be associated with the address.

       The  NSAP  prefix  must  be  set  before a UNI-controlled interface can
       become active.  This can be accomplished  either  by  the  ILMI  daemon
       (ilmid (8)) or the set prefix subcommand.

       atm show config [_interface_]

       displays the following information:

       Interface - the name of the physical interface.

       Vendor - the name of the adapter vendor.

       Model - the model of the adapter.

       Media - the communications medium used by the adapter.

       Bus - the type of bus the adapter is attached to.

       Serial No.  - the adapter's serial number.

       MAC  address - the MAC address of the interface.  Note that this is the
       MAC address encoded in the hardware of the adapter, even if the atm set
       MAC  command  has  been used to change the effective MAC address of the
       interface.

       Hardware version - the hardware revision level reported by  the  inter-
       face.

       Firmware  version  - the firmware revision level reported by the inter-
       face.

       If no parameters are specified on the show config subcommand, the  con-
       figurations of all physical interfaces will be displayed.  If an inter-
       face name is specified, only the configuration of the  given  interface
       is displayed.

       atm show interface [_interface_]

       displays the following information:

       Interface - the name of the physical interface.

       Sigmgr  - the name of the signalling manager which has been attached to
       the interface.  A dash (-) is shown if no signalling manager  has  been
       attached.

       State  -  the  state of the signalling manager for the interface.  Each
       signalling manager has its own set of states.  They are:
            PVC:
                 ACTIVE --- The signalling manager is active.
                 DETACH --- The signalling manager is being detached.
            SPANS:
                 ACTIVE --- The signalling manager is active.
                 DETACH --- The signalling manager is being detached.
                 INIT ----- The signalling manager's initial state.
                 PROBE ---- The signalling manager is attempting to make  con-
                            tact with the ATM switch.
            UNI 3.0 or UNI 3.1:
                 NULL ----- The signalling manager's initial state.
                 ADR_WAIT - The  signalling  manager  is  waiting for the NSAP
                            prefix to be set.
                 INIT ----- The signalling manager is attempting to  establish
                            contact with the switch.
                 ACTIVE --- The signalling manager is active.
                 DETACH --- The signalling manager is being detached.

       ATM address - the ATM address of the interface.

       Network  interfaces  - the names of network interfaces, if any, associ-
       ated with the physical interface.

       If no parameters are specified on the show interface subcommand, infor-
       mation  about  all physical interfaces will be displayed.  If an inter-
       face name is specified, only information about the given  interface  is
       displayed.

       atm show netif [_netif_]

       displays the following information:

       Net Intf - the name of the network interface.

       IP Address - the IP address of the network interface.

       If  no  parameters are specified on the show netif subcommand, informa-
       tion about all network interfaces will be displayed.  If  an  interface
       name  is  specified, only information about the given network interface
       is displayed.

       atm show stats interface [_interface_ [phy | dev | atm | aal0 | aal4  |
       aal5 | driver]]

       displays  statistics  associated with one or more interfaces.  Subject-
       area keywords (phy, dev, atm, aal0, aal4, aal5, or driver) can be spec-
       ified to change the scope of the statistics displayed.

       If  no  subject area keyword is specified, the following information is
       displayed:

       Interface - the name of the physical ATM interface.

       Input PDUs - the number of Protocol Data Units (PDUs) which  have  been
       received by the interface.

       Input  Bytes  -  the  number  of  bytes which have been received by the
       interface.

       Input Errs - the number of input errors which the interface has experi-
       enced.

       Output  PDUs - the number of Protocol Data Units (PDUs) which have been
       transmitted by the interface.

       Output Bytes - the number of bytes which have been transmitted  by  the
       interface.

       Output Errs - the number of output errors which the interface has expe-
       rienced.

       Cmd Errs - the number of command errors which the interface has experi-
       enced.

       If  a  subject-area keyword is specified, then statistics for that sub-
       ject are displayed.  The statistics displayed depend  on  the  adapter.
       If requested statistics are not available for an adaptor, an error will
       be noted.

       If no parameters are specified on the show stats interface  subcommand,
       statistics  for all ATM interfaces are displayed.  If an interface name
       is specified, only statistics for the given interface are displayed.

   VCC Management Subcommands:
       atm delete PVC _interface_ _vpi_ _vci_
       atm delete SVC _interface_ _vpi_ _vci_

       where:
            PVC specifies that the VCC to be closed is a PVC,
            SVC specifies that the VCC to be closed is an SVC,
            _interface_ specifies the physical interface at which the  VCC  to
                 be closed terminates,
            _vpi_ specifies the Virtual Path Identifier (VPI) of the VCC,
            _vci_ specifies the Virtual Channel Identifier (VCI) of the VCC.

       This command closes a VCC.  The two forms differ only in that the first
       specifies that the VCC is a PVC (that was created by the add  PVC  sub-
       command)  and  the  second  specifies that the VCC is an SVC.  Reserved
       VCCs (with VCI values less than 32) cannot be closed with this command.

       atm show stats VCC [_interface_ [_vpi_ [_vci_]]]

       displays the following information:

       Interface - the physical interface on which the VCC terminates.

       VPI - the Virtual Path Identifier (VPI) for the VCC.

       VCI - the Virtual Channel Identifier (VCI) for the VCC.

       Input  PDUs  - the number of Protocol Data Units (PDUs) which have been
       received on the VCC.

       Input Bytes - the number of bytes which have been received on the  VCC.

       Input  Errs - the number of input errors which the VCC has experienced.

       Output PDUs - the number of Protocol Data Units (PDUs) which have  been
       transmitted on the VCC.

       Output  Bytes  - the number of bytes which have been transmitted on the
       VCC.

       Output Errs - the number of output errors which  the  VCC  has  experi-
       enced.

       If  no  parameters are specified on the show VCC subcommand, all active
       VCCs are displayed.  If an interface name is specified, all active VCCs
       for  the  given  interface  are displayed.  If an interface and VPI are
       specified, all active VCCs for the VPI on the given interface are  dis-
       played.   If  an interface, VPI, and VCI are specified, only the speci-
       fied VCC on the given interface is  displayed  (note  that  this  could
       actually be two VCCs, since SPANS considers SVCs to be unidirectional).

       atm show VCC [_interface_ [_vpi_ [_vci_] | SVC | PVC]]

       displays the following information:

       Interface - the physical interface on which the VCC terminates.

       VPI - the Virtual Path Identifier (VPI) for the VCC.

       VCI - the Virtual Channel Identifier (VCI) for the VCC.

       AAL - the ATM Adaptation Layer (AAL) in use on the VCC.  Possible  val-
       ues are null and AAL 1-5.

       Type - specifies whether the VCC is an SVC or a PVC.

       Dir  -  the  direction  of  information  flow  on the VCC.  VCCs can be
       inbound, outbound, or both.

       State - the state of the VCC, as reported by  the  signalling  manager.
       Each signalling manager has its own set of states.  They are:
            PVC:
                 NULL ----- No state.
                 ACTIVE --- The VCC is active.
                 FREE ----- The  VCC  is  closed and the signalling manager is
                            waiting for its resources to be freed.
            SPANS:
                 NULL ----- No state.
                 ACTIVE --- The VCC is a PVC and is active.
                 ACT_DOWN - The VCC is a PVC and the interface is down.
                 POPEN ---- The VCC is being opened.
                 R_POPEN -- The VCC is being opened by a remote host.
                 OPEN ----- The VCC is active.
                 CLOSE ---- The VCC is being closed.
                 ABORT ---- The VCC is being aborted.
                 FREE ----- The VCC is closed and the  signalling  manager  is
                            waiting for its resources to be freed.
            UNI 3.0 or UNI 3.1:
                 NULL ----- No state.
                 C_INIT --- A VCC is being initiated.
                 C_OUT_PR - An outgoing VCC request is proceeding.
                 C_PRES --- A VCC is being initiated by the network.
                 CONN_REQ - A VCC request has been accepted by a HARP user.
                 C_IN_PR -- An incoming VCC request is proceeding.
                 ACTIVE --- The VCC is active.
                 REL_REQ -- The VCC is being closed.
                 REL_IND -- The network is clearing a VCC.
                 SSCF_REC - The  SSCF  session on the signalling channel is in
                            recovery from an error.
                 FREE ----- The VCC is closed and the  signalling  manager  is
                            waiting for its resources to be freed.
                 ACT_DOWN - The VCC is a PVC and the interface is down.

       Encaps  -  the encapsulation in effect on the VCC.  Possible encapsula-
       tions are null and LLC/SNAP.

       Owner - the owner or owners of the VCC.  Shows the name(s) of the func-
       tion(s) using the VCC.

       Destination - the ATM address of the host at the remote end of the VCC.

       If no parameters are specified on the show VCC subcommand,  all  active
       VCCs are displayed.  If an interface name is specified, all active VCCs
       for the given interface are displayed.  If an  interface  and  VPI  are
       specified,  all active VCCs for the VPI on the given interface are dis-
       played.  If an interface, VPI, and VCI are specified, only  the  speci-
       fied  VCC  on  the  given  interface is displayed (note that this could
       actually be two VCCs, since SPANS considers SVCs to be unidirectional).

   IP Management Subcommands:
       atm add ARP [_netif_] _host_ _ATM address_

       where:
            _netif_  is  the optional name of the network interface the ATMARP
                 entry is to be associated with.  If no name is  specified,  a
                 network  interface  is  chosen depending on the IP address of
                 the host being added.
            _host_ is the host name or IP address of the host to be  added  to
                 the ATMARP table,
            _ATM address_ is the ATM address of the host.

       This  command  adds  an  entry  to the ATMARP table for ATM.  The given
       host's IP address is associated with the given ATM  address.   When  IP
       needs  to  transmit data to the host, the specified ATM address will be
       used to open an SVC.

       The entry will be marked as permanent in the ATMARP table and will  not
       be subject to aging.

       atm add PVC _interface_ _vpi_ _vci_ _aal_ _encaps_ IP _netif_ [_host_ |
            dynamic] _traffic_ _params..._

       where:
            _interface_ specifies the physical interface where the PVC  is  to
                 terminate,
            _vpi_ specifies the Virtual Path Identifier (VPI) of the PVC,
            _vci_ specifies the Virtual Channel Identifier (VCI) of the PVC,
            _aal_ specifies the ATM Adaptation Layer (AAL) for the PVC.  Valid
                 choices are "null" or "AAL0" for the null AAL; "AAL1" for AAL
                 1; "AAL2" for AAL 2; "AAL3", "AAL4", or "AAL3/4" for AAL 3/4;
                 and "AAL5" for AAL 5,
            _encaps_ specifies the encapsulation for the PVC.   Valid  choices
                 are  "null" or "none" for null encapsulation, and "LLC/SNAP",
                 "LLC", or "SNAP" for LLC/SNAP encapsulation,
            IP specifies that the owner of the PVC is IP.
            _netif_ specifies the network interface which the  PVC  is  to  be
                 associated  with.   The  network  interface must exist and be
                 associated with the specified physical interface,
            _host_ | dynamic gives the address of the host at the far  end  of
                 the PVC, or the word "dynamic" if its address is to be deter-
                 mined with Inverse ARP.  If "dynamic" is specified,  LLC/SNAP
                 encapsulation must also be specified.
            _traffic_  is  the  traffic type of the PVC and may be one of UBR,
                 CBR or VBR.  Following the traffic type the  traffic  parame-
                 ters  must  be  given.  For UBR and CBR this is the peak cell
                 rate and for VBR these are the peak and sustainable cell rate
                 and the maximum burst size.

       This  command  creates a PVC with the specified attributes and attaches
       it to IP.

       atm delete ARP [_netif_] _host_

       where:
            _netif_ is the optional name of the network interface  the  ATMARP
                 entry is associated with.  If no name is specified, the spec-
                 ified host is deleted from the cache regardless of what  net-
                 work interface it is associated with.
            _host_  is  the  host name or IP address of the host to be deleted
                 from the ATMARP table.

       This command deletes the specified host's entry from the ATMARP  table.

       atm set arpserver _netif_ _ATM address_ | local [_IP prefix_ ...]

       where:
            _netif_  specifies  the  network  interface  for  which the ATMARP
                 server address is to be set.
            _ATM address_ specifies the ATM address of the host  which  is  to
                 provide  ATMARP  service.  If "local" is specified instead of
                 an ATM address, the host on which the command is issued  will
                 become the ATMARP server.
            _IP prefix_ ... is an optional list of IP prefixes that the ATMARP
                 server will provide information about.  An IP prefix is spec-
                 ified  as  a  dotted decimal IP address, followed by a slash,
                 followed a number specifying how many bits of the IP  address
                 are  significant.  For example, 10.0.0.0/8 indicates that the
                 ATMARP server will provide services for all addresses  on  IP
                 network  10.   The  IP subnetwork which the network interface
                 belongs to is automatically included.

       This command sets the address of the ATMARP server for a network inter-
       face.

       atm show ARP [_host_]

       displays the following information:

       Net  Intf - the network interface which traffic for the entry will use.

       Flags - flags showing whether the entry is valid and whether it is per-
       manent.   -  flags  giving  further information about the ATMARP entry.
       The meanings of the characters in the flags are:

            P - the entry is permanent
            R - the entry has been refreshed
            V - the entry is valid

       Age - the number of minutes for which the entry will remain valid.

       Origin - the source of the ATMARP entry.  Possible values are:
            LOCAL ---- The entry is for an interface on the host.
            PERM ----- The entry is permanent.  This is used for entries  that
                       are created with the add ARP command.
            REG ------ The entry was created as the result of a host register-
                       ing with the ATMARP server.
            SCSP ----- The entry was learned via SCSP.
            LOOKUP --- The entry was created as the result of a host  perform-
                       ing an ATMARP lookup.
            PEER_RSP - The entry was created as the result of a host answering
                       an InARP Request.
            PEER_REQ - The entry was created as the result of a  host  sending
                       an InARP Request.

       ATM address - the ATM address of the host the entry refers to.

       IP address - the IP address or domain name of the host the entry refers
       to.

       If no parameters are specified on the show ARP  subcommand,  the  whole
       ATMARP table will be displayed.  If a host name or IP address is speci-
       fied, only information about the given host is displayed.

       This command displays both information that has  been  learned  dynami-
       cally (through one form or another of ATMARP and via SCSP) and informa-
       tion which has been configured by the user (through the add ARP subcom-
       mand).

       atm show arpserver [_netif_]

       displays the following information:

       Net  Intf  -  the network interface for which information is being dis-
       played.

       State - the state of the connection to  the  ATMARP  server.   Possible
       values are:
            NOT_CONF - No ATMARP server has been configured for the interface.
            SERVER --- The host is the ATMARP server.
            PEND_ADR - No ATM address has been set for the interface.
            POPEN ---- The host is attempting to open  a  VCC  to  the  ATMARP
                       server.
            REGISTER - The  host has a VCC open to the ATMARP server and is in
                       the process of registering with the server.
            ACTIVE --- The ATMARP server connection is active.

       ATM Address - the ATM address of the ATMARP server.

       If no parameters are specified on the show  arpserver  subcommand,  the
       ATMARP  servers  for  all  network interfaces will be displayed.  If an
       interface name is specified, only information about the  given  network
       interface is displayed.

       atm show IPVCC [_host_ | _netif_]

       displays the following information:

       Net  Intf  -  the name of the network interface at which the VCC termi-
       nates.

       VPI - the Virtual Path Identifier (VPI) for the VCC.

       VCI - the Virtual Channel Identifier (VCI) for the VCC.

       State - the state of the VCC.  Possible values are:
            PMAP ---- The host has an IP packet to send and is waiting for  an
                      ATMARP mapping.
            POPEN --- The VCC is being opened.
            PACCEPT - A VCC from a remote host is being accepted.
            ACTPENT - A  PVC  is  open, but no ATMARP information is available
                      for it yet.
            ACTIVE -- The VCC is active.

       Flags - flags giving further information about the VCC.   The  meanings
       of the characters in the flags are:

            S - the VCC is an SVC
            P - the VCC is a PVC
            L - the VCC uses LLC/SNAP encapsulation
            M - the IP-to-ATM address mapping for the VCC is valid
            N - there is no idle timeout for the VCC

       IP  Address  - the name and IP address of the host at the remote end of
       the VCC.

       If no parameters are specified on the show IPVCC subcommand, all active
       VCCs are displayed.  If a host name is specified, the active VCC(s) for
       the given host are displayed.  If a network interface  name  is  speci-
       fied,  the active VCC(s) for the given network interface are displayed.

   Miscellaneous Subcommands:
       atm help

       displays a synopsis of the atm command with its subcommands  and  their
       parameters.

       atm show version displays the version of the running HARP software.

SEE ALSO
       ilmid (8); scspd (8); atmarpd (8).

BUGS
       Care  must  be taken to avoid confusing physical interfaces and network
       interfaces.

       Please report any bugs to harp-bugs@magic.net.

COPYRIGHT
       Copyright (c) 1994-1998, Network Computing Services, Inc.

AUTHORS
       John Cavanaugh, Network Computing Services, Inc.
       Mike Spengler, Network Computing Services, Inc.
       Joe Thomas, Network Computing Services, Inc.

ACKNOWLEDGMENTS
       This software was developed with the support of  the  Defense  Advanced
       Research Projects Agency (DARPA).

HARP                              1998-08-20                            ATM(8)

NAME | SYNOPSIS | DESCRIPTION | SUBCOMMANDS | SEE ALSO | BUGS | COPYRIGHT | AUTHORS | ACKNOWLEDGMENTS

Want to link to this manual page? Use this URL:
<http://www.freebsd.org/cgi/man.cgi?query=atm&sektion=8&manpath=FreeBSD+6.2-RELEASE>

home | help