Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
ALC(4)		       FreeBSD Kernel Interfaces Manual			ALC(4)

NAME
     alc -- Atheros AR813x/AR815x/AR816x/AR817x	Gigabit/Fast Ethernet driver

SYNOPSIS
     To	compile	this driver into the kernel, place the following lines in your
     kernel configuration file:

	   device miibus
	   device alc

     Alternatively, to load the	driver as a module at boot time, place the
     following line in loader.conf(5):

	   if_alc_load="YES"

DESCRIPTION
     The alc device driver provides support for	Atheros	AR813x,	AR815x,	AR816x
     and AR817x	PCI Express Gigabit/Fast Ethernet controllers.

     All LOMs supported	by the alc driver have TCP/UDP/IP checksum offload for
     transmit, TCP segmentation	offload	(TSO), hardware	VLAN tag strip-
     ping/insertion features, Wake On Lan (WOL)	and an interrupt moderation
     mechanism as well as a 64-bit multicast hash filter.

     The AR813x, AR815x, AR816x	and AR817x supports Jumbo Frames (up to	9216,
     6144, 9216	and 9216 bytes,	respectively), which can be configured via the
     interface MTU setting.  Selecting an MTU larger than 1500 bytes with the
     ifconfig(8) utility configures the	adapter	to receive and transmit	Jumbo
     Frames.

     The alc driver supports the following media types:

     autoselect	  Enable autoselection of the media type and options.  The
		  user can manually override the autoselected mode by adding
		  media	options	to rc.conf(5).

     10baseT/UTP  Set 10Mbps operation.

     100baseTX	  Set 100Mbps (Fast Ethernet) operation.

     1000baseTX	  Set 1000baseTX operation over	twisted	pair.

     The alc driver supports the following media options:

     full-duplex  Force	full duplex operation.

     half-duplex  Force	half duplex operation.

     For more information on configuring this device, see ifconfig(8).

HARDWARE
     The alc device driver provides support for	the following Ethernet con-
     trollers:

     +o	 Atheros AR8131	PCI Express Gigabit Ethernet controller
     +o	 Atheros AR8132	PCI Express Fast Ethernet controller
     +o	 Atheros AR8151	v1.0 PCI Express Gigabit Ethernet controller
     +o	 Atheros AR8151	v2.0 PCI Express Gigabit Ethernet controller
     +o	 Atheros AR8152	v1.1 PCI Express Fast Ethernet controller
     +o	 Atheros AR8152	v2.0 PCI Express Fast Ethernet controller
     +o	 Atheros AR8161	PCI Express Gigabit Ethernet controller
     +o	 Atheros AR8162	PCI Express Fast Ethernet controller
     +o	 Atheros AR8171	PCI Express Gigabit Ethernet controller
     +o	 Atheros AR8172	PCI Express Fast Ethernet controller
     +o	 Killer	E2200 Gigabit Ethernet controller

LOADER TUNABLES
     Tunables can be set at the	loader(8) prompt before	booting	the kernel or
     stored in loader.conf(5).

     hw.alc.msi_disable
	     This tunable disables MSI support on the Ethernet hardware.  The
	     default value is 0.

     hw.alc.msix_disable
	     This tunable disables MSI-X support on the	Ethernet hardware.
	     The default value is 0.

SYSCTL VARIABLES
     The following variables are available as both sysctl(8) variables and
     loader(8) tunables:

     dev.alc.%d.int_rx_mod
	     Maximum amount of time to delay receive interrupt processing in
	     units of 1us.  The	accepted range is 0 to 130000, the default is
	     100(100us).  Value	0 completely disables the interrupt modera-
	     tion.

     dev.alc.%d.int_tx_mod
	     Maximum amount of time to delay transmit interrupt	processing in
	     units of 1us.  The	accepted range is 0 to 130000, the default is
	     1000(1ms).	 Value 0 completely disables the interrupt moderation.

     dev.alc.%d.process_limit
	     Maximum amount of Rx frames to be processed in the	event loop
	     before rescheduling a taskqueue.  The accepted range is 32	to
	     255, the default value is 64 events.  The interface does not need
	     to	be brought down	and up again before a change takes effect.

SEE ALSO
     altq(4), arp(4), miibus(4), netintro(4), ng_ether(4), vlan(4),
     ifconfig(8)

HISTORY
     The alc driver was	written	by Pyun	YongHyeon <yongari@FreeBSD.org>.  It
     first appeared in FreeBSD 8.0.

FreeBSD	10.2			October	8, 2014			  FreeBSD 10.2

NAME | SYNOPSIS | DESCRIPTION | HARDWARE | LOADER TUNABLES | SYSCTL VARIABLES | SEE ALSO | HISTORY

Want to link to this manual page? Use this URL:
<https://www.freebsd.org/cgi/man.cgi?query=alc&manpath=FreeBSD+10.2-RELEASE>

home | help