Skip site navigation (1)Skip section navigation (2)

FreeBSD Man Pages

Man Page or Keyword Search:
Man Architecture
Apropos Keyword Search (all sections) Output format
home | help
BUS_CONFIG_INTR(9)
configure interrupt polarity and trigger mode
VFS_SET(9)
set up loadable file system vfsconf
VOP_PATHCONF(9)
return POSIX pathconf information
acpi(4)
Advanced Configuration and Power Management support
acpiconf(8)
control ACPI power management
adduser.conf(5)
adduser(8) configuration file
amd.conf(5)
amd(8) configuration file
ancontrol(8)
configure Aironet 4500/4800 devices
atmconfig(8)
ATM configuration tool
auditctl(2)
configure system audit parameters
auditon(2)
configure system audit parameters
auth.conf(5)
authentication capability database
auth_getval(3)
functions for reading values from /etc/auth.conf
bluetooth.device.conf(5)
Bluetooth device configuration file
boot.config(5)
Configuration file for the boot blocks
boot0cfg(8)
boot manager installation/configuration utility
ccdconfig(8)
configuration utility for the concatenated disk driver
config(5)
kernel configuration file format
config(8)
build system configuration files
config_intrhook(9)
schedule a function to be run after interrupts have been enabled, but before root is mounted
confstr(3)
get string-valued configurable variables
cpuset(1)
configure processor sets
dcons_crom(4)
Configuration ROM stub for dcons(4)
ddb(8)
configure DDB kernel debugger properties
ddns-confgen(8)
ddns key generation tool
devd.conf(5)
configuration file for devd(8)
devfs.conf(5)
boot-time devfs configuration information
devfs.rules(5)
devfs configuration information
devinfo(8)
print information about system device configuration
dhclient(8)
Dynamic Host Configuration Protocol (DHCP) client
dhclient-script(8)
DHCP client network configuration script
dhclient.conf(5)
DHCP client configuration file
dhcp-options(5)
Dynamic Host Configuration Protocol options
editrc(5)
configuration file for editline library
finger.conf(5)
finger(1) alias configuration file
freebsd-update.conf(5)
configuration file for freebsd-update(8)
getconf(1)
retrieve standard configuration variables
getnetconfig(3), setnetconfig(3), endnetconfig(3), getnetconfigent(3), freenetconfigent(3), nc_perror(3), nc_sperror(3)
get network configuration database entry
getnetpath(3), setnetpath(3), endnetpath(3)
get /etc/netconfig entry corresponding to NETPATH component
gettytab(5)
terminal configuration data base
hast.conf(5)
configuration file for the hastd(8) daemon and the hastctl(8) utility
hccontrol(8)
HCI configuration utility
hcsecd.conf(5)
hcsecd(8) configuration file
hostapd.conf(5)
configuration file for hostapd(8) utility
ifconfig(8)
configure network interface parameters
inetd.conf(5), inetd(5)
internet super-server
ip6addrctl(8)
configure address selection policy for IPv6 and IPv4
ipf(5), ipf.conf(5), ipf6.conf(5)
IP packet filter rule syntax
ipnat(5), ipnat.conf(5)
IP NAT file format
ippool(5), ippool.conf(5)
IP Pool file format
iscsi.conf(5)
key options to be negotiated in an iSCSI session
kbdcontrol(1)
keyboard control and configuration utility
kldconfig(8)
display or modify the kernel module search path
krb5-config(1)
give information on how to link code against Heimdal libraries
krb5.conf(5)
configuration file for Kerberos 5
krb5_add_et_list(3), krb5_add_extra_addresses(3), krb5_add_ignore_addresses(3), krb5_context(3), krb5_free_config_files(3), krb5_free_context(3), krb5_get_default_config_files(3), krb5_get_dns_canonize_hostname(3), krb5_get_extra_addresses(3), krb5_get_fcache_version(3), krb5_get_ignore_addresses(3), krb5_get_kdc_sec_offset(3), krb5_get_max_time_skew(3), krb5_get_use_admin_kdc krb5_init_context(3), krb5_init_ets(3), krb5_prepend_config_files(3), krb5_prepend_config_files_default(3), krb5_set_config_files(3), krb5_set_dns_canonize_hostname(3), krb5_set_extra_addresses(3), krb5_set_fcache_version(3), krb5_set_ignore_addresses(3), krb5_set_max_time_skew(3), krb5_set_use_admin_kdc(3)
create, modify and delete krb5_context structures
krb5_appdefault_boolean(3), krb5_appdefault_string(3), krb5_appdefault_time(3)
get application configuration value
krb5_config_file_free(3), krb5_config_free_strings(3), krb5_config_get(3), krb5_config_get_bool(3), krb5_config_get_bool_default(3), krb5_config_get_int(3), krb5_config_get_int_default(3), krb5_config_get_list(3), krb5_config_get_next(3), krb5_config_get_string(3), krb5_config_get_string_default(3), krb5_config_get_strings(3), krb5_config_get_time(3), krb5_config_get_time_default(3), krb5_config_parse_file(3), krb5_config_parse_file_multi(3), krb5_config_vget(3), krb5_config_vget_bool(3), krb5_config_vget_bool_default(3), krb5_config_vget_int(3), krb5_config_vget_int_default(3), krb5_config_vget_list(3), krb5_config_vget_next(3), krb5_config_vget_string(3), krb5_config_vget_string_default(3), krb5_config_vget_strings(3), krb5_config_vget_time(3), krb5_config_vget_time_default(3)
get configuration value
krb5_crypto_getblocksize(3), krb5_crypto_getconfoundersize krb5_crypto_getenctype(3), krb5_crypto_getpadsize(3), krb5_crypto_overhead(3), krb5_decrypt(3), krb5_decrypt_EncryptedData(3), krb5_decrypt_ivec(3), krb5_decrypt_ticket(3), krb5_encrypt(3), krb5_encrypt_EncryptedData(3), krb5_encrypt_ivec(3), krb5_enctype_disable(3), krb5_enctype_keysize(3), krb5_enctype_to_string(3), krb5_enctype_valid(3), krb5_get_wrapped_length(3), krb5_string_to_enctype(3)
encrypt and decrypt data, set and get encryption type parameters
l2control(8)
L2CAP configuration utility
ldconfig(8)
configure the shared library cache
libmap.conf(5)
configuration file for dynamic object dependency mapping
lmcconfig(8)
configuration program for SBE (formerly LMC) wide-area network interface cards
loader.4th(8)
loader.conf processing tools
loader.conf(5)
system bootstrap configuration information
login.conf(5)
login class capability database
lwres_conf_init(3), lwres_conf_clear(3), lwres_conf_parse(3), lwres_conf_print(3), lwres_conf_get(3)
lightweight resolver configuration
mac.conf(5)
format of the MAC library configuration file
mac_mls(4)
Multi-Level Security confidentiality policy
mailer.conf(5)
configuration file for mailwrapper(8)
mailwrapper(8)
invoke appropriate MTA software based on configuration file
make.conf(5)
system build information
malloc.conf(5), malloc(5), calloc(5), realloc(5), free(5), reallocf(5), malloc_usable_size(5)
general purpose memory allocation functions
man.conf(5)
man(1) and manpath(1) configuration files
mdconfig(8)
configure and enable memory disks
mdmfs(8), mount_mfs(8)
configure and mount an in-memory file system using the md(4) driver
mergemaster(8)
merge configuration files, et al during an upgrade
mptable(1)
display MP configuration table
named-checkconf(8)
named configuration file syntax checking tool
named.conf(5)
configuration file for named
netconfig(5)
network configuration data base
newsyslog.conf(5)
newsyslog(8) configuration file
nscd.conf(5)
nscd configuration file
nsmb.conf(5)
configuration file for SMB requests
nsswitch.conf(5)
name-service switch configuration file
ntp.conf(5)
Network Time Protocol (NTP) daemon configuration file
pam.conf(5)
PAM policy file format
pathconf(2), lpathconf(2), fpathconf(2)
get configurable pathname variables
pci(9), pci_read_config(9), pci_write_config(9), pci_enable_busmaster(9), pci_disable_busmaster(9), pci_enable_io(9), pci_disable_io(9), pci_set_powerstate(9), pci_get_powerstate(9), pci_find_bsf(9), pci_find_dbsf(9), pci_find_device(9)
PCI bus interface
pciconf(8)
diagnostic utility for the PCI bus
periodic.conf(5)
periodic job configuration information
pf.conf(5)
packet filter configuration file
pmc_configure_logfile(3), pmc_flush_logfile(3), pmc_writelog(3)
log file management
portsnap.conf(5)
configuration file for portsnap(8)
pw.conf(5)
format of the pw.conf configuration file
radius.conf(5)
RADIUS client configuration file
rc.conf(5)
system configuration information
rcsfreeze(1)
freeze a configuration of sources checked in under RCS
rctl.conf(5)
resource limits database defaults
resolvconf(8)
a framework for managing multiple DNS configurations
resolvconf.conf(5)
resolvconf configuration file
resolver(5)
resolver configuration file
rndc-confgen(8)
rndc key generation tool
rndc.conf(5)
rndc configuration file
rrenumd.conf(5)
configuration file for router renumbering daemon
rtadvd.conf(5)
config file for router advertisement daemon
sconfig(8)
channel configuration utility for Cronyx adapters
sicontrol(8)
Specialix SI/XIO driver configuration and debugging
src.conf(5)
source build options
ssh_config(5)
OpenSSH SSH client configuration files
sshd_config(5)
OpenSSH SSH daemon configuration file
sysconf(3)
get configurable system variables
sysctl.conf(5)
kernel state defaults
sysinstall(8)
system installation and configuration tool
syslog.conf(5)
syslogd(8) configuration file
tacplus.conf(5)
TACACS+ client configuration file
tcpdchk(8)
tcp wrapper configuration checker
usbconfig(8)
configure the USB subsystem
verify_krb5_conf(8)
checks krb5.conf for obvious errors
vfsconf(9)
vfs configuration information
vidcontrol(1)
system console control and configuration utility
wlconfig(8)
read/write wavelan config parameters
wpa_supplicant.conf(5)
configuration file for wpa_supplicant(8)
zfs(8)
configures ZFS file systems
zpool(8)
configures ZFS storage pools
CONF_modules_free(3), CONF_modules_finish(3), CONF_modules_unload(3)
OpenSSL configuration cleanup functions
CONF_modules_load_file(3), CONF_modules_load(3)
OpenSSL configuration functions
ASN1_generate_nconf(3), ASN1_generate_v3(3)
ASN1 generation functions
OPENSSL_config(3), OPENSSL_no_config(3)
simple OpenSSL configuration functions
OPENSSL_load_builtin_modules(3)
add standard configuration modules
x509v3_config(1)
X509 V3 certificate extension configuration format
CONF_modules_free(3), CONF_modules_finish(3), CONF_modules_unload(3)
OpenSSL configuration cleanup functions
CONF_modules_load_file(3), CONF_modules_load(3)
OpenSSL configuration functions
/cowthink(1)
configurable speaking/thinking cow (and a bit more)
3proxy.cfg(3)
3proxy configuration file
ALTER_TEXT_SEARCH_CONFIGURATION(7)
change the definition of a text search configuration
ASN1_generate_nconf(3), ASN1_generate_v3(3)
ASN1 generation functions
AfterStep(1x)
X11 window manager AfterStep AutoExec Base Configuration Function
AnimateTypes(1x)
animation modes used in the Animate module's config Animate Resize type
AppleVolumes.default(5), AppleVolumes.system(5), AppleVolumes(5)
Configuration file used by afpd(8) to determine the shares made available through AFP and specify file name extension mappings
AutoExec(1x)
functions to be executed by AfterStep on startup/shutdown AfterStep AutoExec Base Configuration Function
Base(1x)
essential AfterStep configuration options AfterStep AutoExec Base Configuration Function base config file contains most important AfterStep configuration options - Paths to diferent files, virtual screen size, etc. It is loaded prior to any other configuration files
CREATE_TEXT_SEARCH_CONFIGURATION(7)
define a new text search configuration
ColorScheme(1x)
defines color values for standard set of internal color names, to be used in other configuration files
Config::Grammar(3)
A grammar-based, user-friendly config parser
Configuration(3)
reads the configuration file and manages it in memory
ControlPanel(1)
Configure desktop settings for FOX Toolkit applications
DROP_TEXT_SEARCH_CONFIGURATION(7)
remove a text search configuration
EZ_Configure3DCanvas(3), EZ_GLConfig(3)
update the graphics state of a 3D canvas
EZ_ConfigureItem(3)
configure a display item
EZ_ConfigureWidget(3)
configure an existing widget
ExperimentFile(3), exp_read_info (3), exp_fread_info (3), exp_create_info (3), exp_destroy_info (3), exp_create_range (3), exp_extract_range (3), exp_get_feature_index (3), exp_get_int (3), exp_get_rng (3), exp_get_str (3), exp_put_int (3), exp_put_rng (3), exp_put_str (3), exp_print_line (3), exp_print_seq (3), exp_print_file (3), opos2str (3), str2opos (3), conf2str (3), str2conf(3)
Manipulations of the Experiment File format "exp_read_info()" "" "exp_read_info()" "exp_fread_info()" "" "exp_fread_info()" "exp_create_info()" "" "exp_create_info()" "exp_destroy_info()" "" "exp_destroy_info()" "exp_create_range()" "" "exp_create_range()" "exp_extract_range()" "" "exp_extract_range()" "exp_get_feature_index()" "" "exp_get_feature_index()" "exp_get_int()" "" "exp_get_int()" "exp_get_rng()" "" "exp_get_rng()" "exp_get_str()" "" "exp_get_str()" "exp_put_int()" "" "exp_put_int()" "exp_put_rng()" "" "exp_put_rng()" "exp_put_str()" "" "exp_put_str()" "exp_print_line()" "" "exp_print_line()" "exp_print_seq()" "" "exp_print_seq()" "exp_print_file()" "" "exp_print_file()" "opos2str()" "" "opos2str()" "str2opos()" "" "str2opos()" "conf2str()" "" "conf2str()" "str2conf()" "" "str2conf()"
FcConfigAppFontAddDir(3)
Add fonts from directory to font database
FcConfigAppFontAddFile(3)
Add font file to font database
FcConfigAppFontClear(3)
Remove all app fonts from font database
FcConfigBuildFonts(3)
Build font database
FcConfigCreate(3)
Create a configuration
FcConfigDestroy(3)
Destroy a configuration
FcConfigEnableHome(3)
controls use of the home directory
FcConfigFilename(3)
Find a config file
FcConfigGetBlanks(3)
Get config blanks
FcConfigGetCache(3)
DEPRECATED used to return per-user cache filename
FcConfigGetCacheDirs(3)
return the list of directories searched for cache files
FcConfigGetConfigDirs(3)
Get config directories
FcConfigGetConfigFiles(3)
Get config files
FcConfigGetCurrent(3)
Return current configuration
FcConfigGetFontDirs(3)
Get font directories
FcConfigGetFonts(3)
Get config font set
FcConfigGetRescanInterval(3)
Get config rescan interval
FcConfigHome(3)
return the current home directory
FcConfigParseAndLoad(3)
load a configuration file
FcConfigReference(3)
Increment config reference count
FcConfigSetCurrent(3)
Set configuration as default
FcConfigSetRescanInterval(3)
Set config rescan interval
FcConfigSubstitute(3)
Execute substitutions
FcConfigSubstituteWithPat(3)
Execute substitutions
FcConfigUptoDate(3)
Check timestamps on config files
FcFini(3)
finalize fonconfig library
FcInit(3)
initialize fontconfig library
FcInitBringUptoDate(3)
reload configuration files if needed
FcInitLoadConfig(3)
load configuration
FcInitLoadConfigAndFonts(3)
load configuration and font data
Feel(1x)
AfterStep feel configuration Feel WindowBox definition
FeelWindowBox(1x)
defines placement policy for certain type of windows, based on desk, window attributes, window size, etc. Usefull for xinerama configurations, where windows should not be placed in between screens
Functions(1x)
built in AfterStep functions AfterStep AutoExec Base Configuration Function
FvwmWindowMenu(1)
open configurable fvwm menu listing current windows
GraphicsMagick++-config(1)
get information about the installed version of Magick++
GraphicsMagick-config(1)
get information about the installed version of GraphicsMagick
GraphicsMagickWand-config(1)
get information about the installed version of GraphicsMagick
Lire::Config(3pm)
import Lire configuration variables to perl
Lire::Config::BasePluginSpec(3pm)
PluginManager based PluginSpec
Lire::Config::Build(3pm)
Look up build-time information
Lire::Config::ChartSpec(3pm)
Defines a chart to generate
Lire::Config::ChartTypeSpec(3pm)
PluginSpec for ChartType
Lire::Config::ConfigFile(3pm)
Class for configuration file manipulation
Lire::Config::Dictionary(3pm)
Dictionary Value object
Lire::Config::DlfAnalyserSpec(3pm)
PluginSpec to select an analyser
Lire::Config::DlfConverterSpec(3pm)
PluginSpec for DlfConverters
Lire::Config::DlfStreamSpec(3pm)
Defines DlfStream configuration
Lire::Config::DlfStreamsSpec(3pm)
Holds DlfStream configuration
Lire::Config::Index(3pm)
Index registry and interface
Lire::Config::List(3pm)
List Value Object
Lire::Config::Object(3pm)
Configuration value which instantiates an object
Lire::Config::OutputFormatSpec(3pm)
PluginSpec for OutputFormat
Lire::Config::Parser(3pm)
Creates a Lire::Config::ConfigFile object from XML
Lire::Config::Plugin(3pm)
Value object for plugin configuration
Lire::Config::RecordSpec(3pm)
Specification for a record-like type
Lire::Config::Reference(3pm)
Scalar which points to an Index
Lire::Config::ReferenceSpec(3pm)
SelectSpec which takes its options from an Index
Lire::Config::ReportConfigIndex(3pm)
Index for store report configurations
Lire::Config::ReportSectionSpec(3pm)
Defines a report section
Lire::Config::ReportSpec(3pm)
Defines a report configuration
Lire::Config::Scalar(3pm)
Lire Config container for scalar values
Lire::Config::SpecParser(3pm)
Create configuration specification from XML files
Lire::Config::Value(3pm)
Lire value containers for configuration variables
Lire::Config::VariableIndex(3pm)
Index of the available variables in a TableInfo
Lire::Config::XMLSpecListSpec(3pm)
List of XML specifications
Lire::OutputJob(3pm)
Object used to represent a configured formatting of a report
Lire::Report::ChartConfig(3pm)
Chart configuration object
Lire::ReportConfig(3pm)
API to the report configuration file
Lire::ReportJob(3pm)
Object used to configure periodical report generation
Lire::ReportSection(3pm)
API to report configuration's section
Lire::Test::HashConfig(3pm)
Braindead Lire::Config implementation
Lire::UI::Widget(3pm)
Views for Lire::Config::Value object
Locale::Po4a::Debconf(3)
convert debconf templates from/to PO files
Locale::Po4a::KernelHelp(3)
convert kernel configuration help from/to PO files
MP4AddRtpESConfigurationPacket(3)
Add ES configuration information to an RTP hint
MP4GetTrackESConfiguration(3)
Get the elementary stream (ES) configuration of a track
MP4SetTrackESConfiguration(3)
Set the elementary stream (ES) configuration of a track
Magick++-config(1)
get information about the installed version of Magick++
Magick-config(1)
get information about the installed version of ImageMagick
MagickCore-config(1)
get information about the installed version of ImageMagick
MagickWand-config(1)
get information about the installed version of the Magick Wand
Message(n)
Click element; prints a message on configuration
Munin::Common::Config(3)
Abstract base class for common config code
Munin::Master::Config(3)
Holds the master configuration
Munin::Node::Config(3)
Singleton node configuration container. Reads configuration files
Munin::Node::Configure::Debug(3)
Prints a debug message in the standard munin-node-configure format
Munin::Node::Configure::History(3)
Filtering plugins based on the version of Munin they were first distributed with
Munin::Node::Configure::HostEnumeration(3)
Takes a list of hosts, and returns the corresponding IPs in dotted-quad form
Munin::Node::Configure::Plugin(3)
Class representing a plugin, along with its installed and suggested services
Munin::Node::Configure::PluginList(3)
Loading and listing a collection of plugins
Munin::Node::SNMPConfig(3)
Subroutines providing munin-node-configure's SNMP scanning capabilities
OPENSSL_config(3), OPENSSL_no_config(3)
simple OpenSSL configuration functions
OPENSSL_load_builtin_modules(3)
add standard configuration modules
PolicyKit.conf(5)
PolicyKit configuration file
SWISH-CONFIG(1)
Configuration File Directives
Script(n)
Click element; script a Click router configuration
TIFFFindCODEC(3tiff), TIFFRegisterCODEC(3tiff), TIFFUnRegisterCODEC(3tiff), TIFFIsCODECConfigured(3tiff)
codec-related utility routines
Tspi_Data_Unseal(3)
dencrypt data encrypted by Tspi_Data_Seal() only if it was encrypted on the same platform and under the current configuration
Wand-config(1)
get information about the installed version of the Magick Wand
WordContext(3)
read configuration and setup mifluz context
XConfigureEvent(3)
ConfigureNotify event structure
XConfigureRequestEvent(3)
ConfigureRequest event structure
XConfigureWindow(3), XMoveWindow(3), XResizeWindow(3), XMoveResizeWindow(3), XSetWindowBorderWidth(3), XWindowChanges(3)
configure windows and window changes structure
XIconifyWindow(3), XWithdrawWindow(3), XReconfigureWMWindow(3)
manipulate top-level windows
XSupportsLocale(3), XSetLocaleModifiers(3)
determine locale support and configure locale modifiers
XkbSetAccessXTimeout(3)
Configures the AccessXTimeout options for a keyboard device
XmDropSiteConfigureStackingOrder(3)
A Drag and Drop function that reorders a stack of widgets that are registered drop sites "XmDropSiteConfigureStack\%ingOrder" "Drag and Drop functions" "XmDropSiteConfigureStack\%ingOrder"
XtConfigureWidget(3), XtMoveWidget(3), XtResizeWidget(3)
move and resize widgets
abookrc(5), $HOME/.abook/abookrc(5)
configuration file for abook address book program
adacurses-config(1)
helper script for AdaCurses libraries
aepconf(5)
aegis project configuration file "aepconf(5)" "project configuration file format"
aeuconf(5)
user configuration file "aeuconf(5)" "user configuration file format"
afp_ldap.conf(5)
Configuration file used by afpd(8) to configure a LDAP connection to an LDAP server. That is needed for ACL support in order to be able to query LDAP for UUIDs
afp_signature.conf(5)
Configuration file used by afpd(8) to specify server signature
afp_voluuid.conf(5)
Configuration file used by afpd(8) to specify UUID for Time Machine volume
afpd.conf(5)
Configuration file used by afpd(8) to determine the setup of its file sharing services
afpldaptest(1)
Syntactically check an afp_ldap.conf
afterstep_faq(1x)
This document is an ever growing set of questions, statements, ideas and complaints about AfterStep version 2.0 1. General Information1.1. About this Document. This document is an ever growing set of questions, statements, ideas and complaints about AfterStep version 2.0. You can get this FAQ at the following locations: The rest of this document assumes you are running AfterStep 2.0. If you are running a version of AfterStep prior to version 2.0, this document will suggests only one thing: upgrade. 1.2. What is AfterStep? AfterStep is a Window Manager for the X Window System (hereafter referred to as X). It was started to emulate the look and feel of NeXTSTEP(tm), but has evolved into something that while still being able to emulate NeXT, can do much much more. Without using much memory or cpu time, AfterStep provides all the features one could want in a Window Manager. 1.3. What is AfterStep's history? Original AfterStep was a continuation of the BowMan Window Manager which was originally put together by Bo Yang. BowMan was based on the fvwm Window Manager, written by Robert Nation. Fvwm was based on code from twm. And so on.... Idea was to emulate some of the look and feel of the NEXTSTEP(tm) user interface, but overtime it evolved to include other concepts, as dictated by end user needs. It is that unholy direction that made Alfredo Kojima abandon project in 1997 and create a Window Manger of its own - Window Maker, which had a goal of strict adherance to NEXTSTEP interface ideas. After releasing version 1.8.11 it became aparent for developers that old AfterStep codebase had reached its limits and required a substantial redesign. Such redesign began with development of radically new image handling library libAfterImage, introducing high quality image manipulation, blending, TrueType fonts, XML image scripting, and more. Building off of libAfterImage and incorporating new developments in X Window management, AfterStep 2.0 was born and released in September, 2004. As of now AfterStep code base contains none of the original fvwm parts, and association to fvwm, twm and BowMan remain only in history. 1.4. Fine, what if I'm not running AfterStep 2.0? Is there a FAQ for me? Yes. There should be a version of the AfterStep FAQ available within your specific AfterStep distribution. If you are using a version earlier than 2.0, it is strongly suggested you upgrade. 1.5. What is X? What are these "window managers" ? "X" is shorthand for The X Window System. It is a basis for building graphical user interfaces for UNIX (it is available for non-UNIX systems, but wasn't designed to be as such). "X" is not the interface itself, just a foundation for one. For more information, check www.x.org . A Window Manager is a program that manages your windows during your X session. AfterStep is one of many available window managers . 1.6. What are AfterStep's main features? "The Wharf" Similar to NeXTSTEP's(tm) Dock, it allows applications to be Swallowed, shortcuts with icons, and many other things. "The Pager" Shows a miniature view of the Afterstep desktops, you can move between them, and move windows around in the Pager as though it were a miniature desktop. "The WinList" A list of all the windows, clicking on the items can show that window, destroy it, shade it, or anything you might want. "Configurability" Almost anything can be changed. "XML image scripting" AfterStep allows XML scripts to be used to assemble complex images for things like buttons, frame sides, etc, from other, simplier images or graphical primitives. "TrueType fonts support" Antialised TrueType fonts could be used to render window titles and other labels. "Unicode, UTF8 and other encodings support" Most international character encodings are supported as long as fonts provide glyphs. "ColorSchemes" AfterStep can calculate a set of about 34 colors to create looks with harmonious color composition. 1.7. Is AfterStep 2.0 GNOME and/or KDE compliant? AfterStep 2.0 supports Extended Window Manager Hints, ICCCM protocol and Motif hints, thus making it as compatible as possible with both GNOME and KDE, as well as most other X applications. 1.8. Can I run it in Microsoft Windows(tm)? AfterStep 2.0 does run under Windows using CYGWIN compatibility layer, while running any X server. Some of the X servers available under Windows allow so-called root-less mode, where X applications can coincide with native applications. See sample screenshot . 1.9. Who develops AfterStep? "Sasha Vasko <sasha at aftercode.net>" coordinator, coder, web designer, carpenter, and everything else ( at the moment ). "Niklas Lunger <niklas at fet dot at>" documentation and user testing. "Nathan Mahon <as_ml at vaevictus net>" realease manager 1.10. AfterStep is awesome! How can I help? Code contributions are welcome. Hardware donations are welcome. If you can help write AfterStep, or feel you can help the effort elsewhere, do so. Hang out on irc (#afterstep, efnet), participate on the mailing lists, suggest ideas, help code, etc etc. 1.11. Who writes this FAQ? see 1.9. above. 2. Resources2.1. Where can I find AfterStep resources, or help? "HTML documentation" AfterStep 2.0 comes installed with complete set of documentation in HTML format, usually installed at /usr/local/share/afterstep/doc/html or /usr/share/afterstep/doc/html . Same documentation is available online from : http://www.afterstep.org/visualdoc.php . If you find that documentation incomplete in some areas - please feel free to submit any corrections to any of the AfterStep mailing lists. "WWW Page" The official AfterStep web page is at http://www.afterstep.org/ . This web site is managed by whoever has write access to AfterStep CVS, and is kindly hosted by the generous people at Web Conquest . "FTP site" The FTP site, ftp://ftp.afterstep.org/ , is the best place to get AfterStep. "AfterStep applets" The applets (asapps) that go with AfterStep are distributed separately. The applet distribution is maintained by Albert Dorofeev, (<tigr@tigr.net>). You can find the applets at http://www.tigr.net/afterstep/as-apps/ . RPMs for many an applet could be found here : http://www.afterstep.org/rpms/ "Man pages." AfterStep installation comes with set of man pages that attempt to cover all aspects of AfterStep configuration. Please read the relevent man page before asking a question. Also note that the Pager man page is 'man Pager' (note the capitalization). "IRC" There is also #afterstep on freenode.net IRC servers. You can view current activity here : http://www.rchitecture.com/~computer/ 2.2. What are the AfterStep mailing lists, and where are their archives? There are three AfterStep mailing lists. as-users, as-devel and as-bugs. "as-users." as-users is the general AfterStep mailing list, open to all AfterStep questions, concerns and ideas ( NO LiteSTEP, Window Maker, some-x-app questions unless it really does pertain to AfterStep, please). Subscribe by entering your e-mail at : http://mail.afterstep.org/mailman/listinfo/as-users/ "as-devel." as-devel is the development AfterStep mailing list. It is used to send notices about commits to CVS repository. Subscribe by entering your e-mail at : http://mail.afterstep.org/mailman/listinfo/as-devel/ "as-bugs." as-bugs is the AfterStep mailing list for submiting bug reports. It is geared toward development questions, ideas and complaints. Subscribe by entering your e-mail at : http://mail.afterstep.org/mailman/listinfo/as-bugs/ The mailing list archives can be read at http://www.tigr.net/afterstep/mail/ . 3. Getting and Installing AfterStep 2.03.1. Where can I get AfterStep 2.0? You can download AfterStep 2.0 at any of the following locations: ftp://ftp.afterstep.org/stable/ SourceForge.net RPM packages 3.2. What do I need to compile and install AfterStep? Because AfterStep is an X application, you need to have X installed, and the X development libraries (note, in this case "development" means libraries need to compile things with X, not development level code). It's probably a good idea to also have a working C compiler. AfterStep includes some image libraries, but it is recommended that you install those libraries using your distribution's package management system. Note that you will need development libraries in addition to run-time libraries. The following are the libraries that AfterStep can take advantage of : libJPEG - support for JPEG image format libPNG - support for PNG image format libTIFF - support for TIFF image format Freetype - support for TrueType fonts Note that following image format do not require any external libraries : XPM, PPM, BMP, ICO, XCF, GIF. 3.3. Can I install AfterStep without being root? Yes, before compiling AfterStep, do this: Source : mkdir /bin mkdir -p /man/man1 /configure --prefix / Then follow the normal install directions, allowing you to Source : make installwithout being root. 3.4. How do I upgrade AfterStep from AfterStep version prior to 2.0.0? Install AfterStep 2.0 and then run it. It will start with default configuration that you may or maynot like. If you wish to try and reuse your old configuration files, then copy them over from your old /GNUstep/Library/AfterStep/ directory and into /.afterstep/. Restart AfterStep to make changes effective. If some of the features do not work quite right - feel free to submit bug report along with your configuration files. It is recommended though that you start with default configuration and try out all of the supplied looks and color schemes. Select whichever is close to what you want and then modify it to your liking. These approach will allow you to take advantage of many new features, available in AfterStep 2.0. 3.4. How do I upgrade AfterStep from AfterStep version higher then 2.0.0? Make sure that all configuration files that you ever changed are in your home directory at /.afterstep/, as installing afterstep will replace everything in global shared location (/usr/local/share/afterstep). Install afterstep and run. You should not have any trouble. 3.5. What's up with all these compile errors? Most likely, you don't have the X devel package (should have come with your operating system, if not, check http://www.x.org/ ). 3.6. How the hell does one configure AfterStep? Configuration files are usually either in /usr(/local)/share/afterstep for system wide configuration and ~.afterstep for personal settings. Configuration is handled in multiple files: look file (in looks subdirectory) for visual attributes, feel file (in feels subdirectory) for the general behaviour; wharf, winlist, banner, pager, animate for module specific configuration. Just copy any file you want to modify over from /usr(/local)/share/afterstep to ~.afterstep to override system wide defaults retaining subdirectory layout
ahwmrc(5)
configuration file for the AHWM window manager
aide.conf(5)
The configuration file for Advanced Intrusion Detection Environment
alerts.cfg(5)
Configuration for for xymond_alert module
alsaconf(8)
configuration tool for the Advanced Linux Sound Architecture
alter_text_search_configuration(7), ALTER TEXT SEARCH CONFIGURATION(7)
change the definition of a text search configuration
amaddclient(8)
program to add client to an existing Amanda configuration
amanda-changers(7)
Configuring and Using Amanda Changers
amanda-client.conf(5)
Client configuration file for Amanda, the Advanced Maryland Automatic Network Disk Archiver
amanda-devices(7)
Configuring and Using Amanda Devices
amanda-scripts(7)
Configuring and using the Script API
amanda.conf(5)
Main configuration file for Amanda, the Advanced Maryland Automatic Network Disk Archiver
amd.conf(5)
Amd configuration file
amdump(8)
back up all disks in an Amanda configuration
amgetconf(8)
look up configuration parameters and manipulate debug logs
ample.conf(5)
configuration file for Ample
amserverconfig(8)
program to setup initial Amanda configuration
anacrontab(5), /usr/local/etc/anacrontab(5)
configuration file for anacron
analysis.cfg(5)
Configuration file for the xymond_client module
and.conf(5), /etc/and.conf(5)
general configuration parameters for the auto nice daemon
aoxsuper.conf(5)
configuration file for Archiveopteryx
ap-config(8)
configure and monitor Atmel and NWN based APs
apcupsd.conf(5)
apcupsd(8) configuration file
app_config(3)
application configuration system
applygnupgdefaults(8)
Run gpgconf --apply-defaults for all users
apsfilterrc(5)
configuration file for magic print filter
apt-config(8)
APT Configuration Query program
apt-extracttemplates(1)
Utility to extract DebConf config and templates from Debian packages
apt.conf(5)
Configuration file for APT
archiveopteryx.conf(5)
configuration file for Archiveopteryx
ares_save_options(3)
Save configuration values obtained from initialized ares_channel
ares_set_servers(3)
Initialize an ares_channel name servers configuration
argconfig(3bobcat), FBB::ArgConfig(3bobcat)
A singleton class processing program arguments
argus.conf(5)
argus resource file
asmtpd.conf(5)
Avenger SMTP Daemon configuration file
atalkd.conf(5)
Configuration file used by atalkd(8) to determine the interfaces used by the master Netatalk daemon
atpdiag(1)
checks atp qwk reader configuration
auditctl(2)
configure system audit parameters
auditon(2)
configure system audit parameters
augtool(1)
inspect and modify configuration files
autoconf-2.68(1), autoconf(1)
Generate configuration scripts
autoheader-2.68(1), autoheader(1)
Create a template header for configure
automounter(8)
Dynamically configure amd for existing devices
automounter.conf(5)
Define runtime parameters for automounter
autoopts-config(1)
script to get information about installed version of autoopts
autoreconf-2.68(1), autoreconf(1)
Update generated configuration files
autoscan-2.68(1), autoscan(1)
Generate a preliminary configure.in
autoupdate-2.68(1), autoupdate(1)
Update a configure.in to a newer Autoconf
avahi-autoipd(8)
IPv4LL network address configuration daemon
avahi-daemon.conf(5)
avahi-daemon configuration file
avahi-dnsconfd(8)
Unicast DNS server from mDNS/DNS-SD configuration daemon
avahi-dnsconfd.action(8)
avahi-dnsconfd action script
awesome2rc(5)
Configuration file for the awesome2 window manager
awesomerc(5)
Configuration file for the awesome window manager
awffull.conf(5), AWFFull(5)
A Webalizer Fork, Full o' features
axfrdns-conf(8)
sets up a DNS zone-transfer service
bbackupd-config(8)
Box Backup client daemon configuration file generator
bbackupd.conf(5)
Box Backup client daemon configuration file
bbconf(1)
a qt-based gui configuration program for blackbox
bbkeysrc(5)
bbkeys configuration file
bbstored-config(8)
Box Backup store daemon configuration file generator
bbstored.conf(5)
Box Backup store daemon configuration file
bcfg2(1)
reconfigure machine based on settings in Bcfg2
bcfg2-server(8)
Server for client configuration specifications
bcfg2.conf(5)
configuration parameters for Bcfg2
bgpd.conf(5)
Border Gateway Protocol daemon configuration file
bip.conf(5)
Configuration file for BIP IRC Proxy
bitlbee.conf(5)
configuration file for bitlbee (8)
bld.conf(5)
Configuration file for BLD
bld_acl.conf(5)
Access lists for BLD
bld_whitelist.conf(5)
White lists for BLD
bmc-config(8)
configure BMC values
bmc-config.conf(5), bmc-config(5)
BMC configuration file format and details
bnetd.conf(5)
configuration for the Unix Battle.net daemon
bochsrc(5)
Configuration file for Bochs
boom.cfg(5), glboom.cfg(5)
Configuration file for PrBoom v2.1.0 onwards
brlcad-config(1)
script to get information about the installed version of BRL-CAD
bsmtrace.conf(5)
configuration file for bsmtrace
bsnmp-regex.conf(5)
the configuration file for the bsnmp-regex(8) module
buffindexed.conf(5)
configuration file for buffindexed ovmethod
bugle-log(7)
configure logging output from other filter-sets
build.xml(5)
configuration file used by ant to build projects
buildflags.awk(1)
convert buildflags.conf(1) files into make syntax
buildflags.conf(1)
set build options for ports(7), world and everything
buildflags.mk(1)
import buildflags.conf(1)
byobu(1)
wrapper script for seeding a user's byobu configuration and launching screen
byobu-config(1)
Configuration utility for byobu
caca-config(1)
script to get information about the installed version of libcaca
castgetrc(5)
configuration file for castget
cb_share_config(1)
Import/export parts of Code::Blocks configuration
ccconfig(1)
Get Convert::Binary::C configuration for a compiler
cdeploy(1)
deploy a set of configuration files to a target file system
cfagent(8)
system configuration agent
cfengine(8)
network configuration engine
cfg(3), OSSP cfg(3)
Configuration Parsing
cfg(3m)
persistent configuration properties interface
cfgmaint(1)
configuration tool for Visual Builder
cfgread(3), cfgget(3), cfgget2(3)
functions to read and parse configuration files
charmrc(5)
Configuration file for Charm
cherokee-config(1)
script to get information about the installed version of Cherokee
chilli.conf(5)
Chilli Configuration
chilli_radconfig(1)
Utility function to fetch configurations over RADIUS
clamav-milter.conf(5)
Configuration file for clamav-milter
clamconf(1)
Clam AntiVirus configuration utility
clamd.conf(5)
Configuration file for Clam AntiVirus Daemon
clamsmtpd.conf(5)
the configuration file for clamsmtpd(8)
classes.conf(5)
class configuration file for cups
click(5)
Click configuration language '
click-align(1)
adds required Align elements to a Click configuration '
click-combine(1)
combines two or more Click configurations into one '
click-devirtualize(1)
removes virtual function calls from a Click configuration '
click-fastclassifier(1)
specializes Classifier code in a Click configuration '
click-flatten(1)
removes compound elements from a Click configuration '
click-install(1)
installs a Click configuration into the kernel module driver '
click-pretty(1)
pretty-prints a Click configuration in HTML '
click-uncombine(1)
separates a component from a combined Click configuration '
click-undead(1)
removes dead code from a Click configuration '
click-xform(1)
pattern-based Click configuration optimizer '
client-local.cfg(5)
Local configuration settings for Xymon clients
client.conf(5)
client configuration file for cups
clients.conf(5)
FreeRADIUS client configuration
climmrc(5), ~/.climm/climmrc(5)
The configuration file for climm
clockspeed-conf(8)
configure supervise scripts to run clockspeed client
cloginrc(5), .cloginrc(5)
clogin configuration file
cnfsheadconf(8)
set CNFS header
coin-config(1)
Display Coin Library Configuration
collectd.conf(5)
Configuration for the system statistics collection daemon collectd
combo.cfg(5)
Configuration of combostatus tool
commoncpp-config(1)
script to get information about common c++ library
comprex-config(1)
Get information about a libcomprex installation
conf(5)
LAM node process schema
confadmin(8)
confman administration tool
confaudit(8)
configuration auditor
confexport(8)
configuration exporter
confget(1)
read a variable from a configuration file
config(5)
OpenSSL CONF library configuration files
config(5)
user configuration file for bpython
config-edit(1)
Edit data of configuration managed by Config::Model
config.guess-2.68(1)
guess the build system triplet
config.sub-2.68(1)
validate and canonicalize a configuration triplet
configFileLoad(3)
parse a configuration file
config_data(1)
Query or change configuration of Perl modules
config_is_hooked(3)
Tells if a config section has custom hooks. Allegro game programming library
config_prog(1)
-- Configure Interchange programs with MakeMaker variables
config_status_demo.pl(1)
demonstrate using Nagios::Config and Nagios::StatusLog together
configbody(n)
change the "config" code for a public variable
configdump(1)
Interchange configuration dumper
configfile(3bobcat), FBB::ConfigFileile(3bobcat)
A class processing standard unix-like configuration files
conflict(8)
search for alias/password conflicts
confman(8)
configuration file manager
confman.conf(5)
confman configuration file
confreport.cgi(1)
Xymon Configuration report
confsync(8)
configuration syncer
conserver.cf(5)
console configuration file for conserver (8)
cpl_complete_word(3), cfc_file_start(3), cfc_literal_escapes(3), cfc_set_check_fn(3), cpl_add_completion(3), cpl_file_completions(3), cpl_last_error(3), cpl_list_completions(3), cpl_recall_matches(3), cpl_record_error(3), del_CplFileConf(3), del_WordCompletion(3), new_CplFileConf(3), new_WordCompletion(3)
lookup possible completions for a word
cppunit-config(1)
script to get information about the installed version of cppunit
cpu.conf(5)
cpu configuration file
create_text_search_configuration(7), CREATE TEXT SEARCH CONFIGURATION(7)
define a new text search configuration
critical.cfg(5)
Configuration of the showgraph CGI
csocks.conf(5)
Configuration file for csocks library
ctpp2-config(1)
CTPP configuration tool
ctrlproxy_config(5)
Configuration file for ctrlproxy
cups-config(1)
get cups api, compiler, directory, and link information
cupsctl(8)
configure cupsd.conf options
cupsd.conf(5)
server configuration file for cups
cupstestdsc(1)
test conformance of postscript files
cupstestppd(1)
test conformance of ppd files
curl-config(1)
Get information about a libcurl installation
cvsd-buginfo(8)
print out cvsd configuration information for bug reports
cvsd.conf(5)
configuration file for cvsd
cvsgraph.conf(5)
CVS/RCS repository grapher configuration
cvswrap.conf(5)
configuration file for cvswrap
cycbuff.conf(5)
Configuration file for INN CNFS storage method
cyconfig(1), cyconvertrules(1), cydumprules(1), cyloadrules(1), cypasswd(1)
cyphesis tools
cyrus.conf(5)
Cyrus configuration file
dahdi_cfg(8)
configures DAHDI kernel modules from /usr/local/etc/dahdi/system.conf
dahdi_scan(8)
Print Configuration of DAHDI Spans
darkice.cfg(5)
configuration file for darkice
dbconfig(5)
GNATS database configuration file
dbmail.conf(5)
configuration file for DBMail, the Database Mailer
ddns-confgen(8)
ddns key generation tool
detcas(1)
Determinant Configuration Interaction / Complete Active Space Self-Consistent-Field Program
detcasman(1)
Determinant Configuration Interaction / Complete Active Space Self-Consistent-Field Program Manager
detci(1)
Determinant Configuration Interaction Program
detoxrc(5)
configuration file for detox(1)
dfbg(1)
DirectFB background configuration tool
dhclient(8)
Dynamic Host Configuration Protocol Client
dhclient-script(8)
DHCP client network configuration script
dhclient.conf(5)
DHCP client configuration file
dhcp-options(5)
Dynamic Host Configuration Protocol options
dhcp6c.conf(5)
DHCPv6 client configuration file
dhcp6s.conf(5)
DHCPv6 server configuration file
dhcpd(8)
Dynamic Host Configuration Protocol Server
dhcpd.conf(5)
dhcpd configuration file
dhcrelay(8)
Dynamic Host Configuration Protocol Relay Agent
dhexrc(5)
Configuration File for dhex
diablo-files(5)
Synopsis of configuration and control files for Diablo
directfbrc(5)
DirectFB configuration file
dirvish.conf(5)
dirvish configuration file
diskcheckd.conf(5), diskcheckd(5)
daemon to check for disk read errors
diskprep(8)
a program to prepare disks for use based on a config file
displays(5)
Display Configuration File
dkconfig(3)
Configuration definitions for the dk library set
dmxtodmx(1)
dmx configuration file parser and printer
dns-conf-check(1)
check /etc/named.conf file "dns-conf-check(1)" "check /etc/named.conf file"
dnscache-conf(8)
sets up a DNS cache service
doinkd.cf(5), /usr/local/etc/doinkd/doinkd.cf(5)
doinkd configuration file format
doormand.cf(5)
The doormand configuration file
dotldnsm(5), .ldnsm(5)
The config file for ldnsm
doveconf(1)
Dovecot(aqs configuration dumping utility
dovecot(1)
a secure and highly configurable IMAP and POP3 server
dphys-config(1)
daily auto-install/update and/or remove config files
dpkg-checkbuilddeps(1)
check build dependencies and conflicts
dpkg.cfg(5)
dpkg configuration file
drop_text_search_configuration(7), DROP TEXT SEARCH CONFIGURATION(7)
remove a text search configuration
dsbl.conf(5)
configuration file for all DSBL testers
dselect.cfg(5)
dselect configuration file
dtcpc(8)
Dynamic Tunnel Configuration Protocol client
dtcpclient(8)
Dynamic Tunnel Configuration Protocol client
dtcps(8)
Dynamic Tunnel Configuration Protocol daemon
dumpfcfg(1)
dump fidoconfig to file or stdout
dwarf_seterrarg(3), dwarf_seterrhand(3)
configure error handling
e2fsck.conf(5)
Configuration file for e2fsck
eboard-config(1)
program to get information about the installed eboard
ecl(1), ecl-config(1)
Embeddable Common LISP configuration query
ecru-config(1)
is a tool for managing ecru configuration
editconf(1)
edits the box and writes subgroups VERSION 4.5.4-dev-20110404-bc5695c
editkernel(1)
Commandline program for editing a kernel configuration file
editlogin(1)
Commandline program for editing /etc/login.conf
editrc(5)
configuration file for editline library
ekiga(1), Ekiga(1)
SIP and H.323 Voice over IP and Videoconferencing for UN*X
elinks.conf(5)
ELinks configuration file
elmoconf.pl(1)
Configuration tool for Elmo
emil.cf(1)
configuration file for emil(1)
empathy-accounts(1)
Accounts configuration dialog for Empathy instant messaging client
entitymib(1)
display hardware configuration of a network device
epylog.conf(5)
epylog configuration
esd-config(1)
The Enlightened Sound Daemon
esmtprc(5)
esmtp configuration file
estconfig(1)
configuration utility of Hyper Estraier
etter.conf(5)
Ettercap configuration file
evdns(3), evdns_init evdns_shutdown evdns_err_to_string evdns_nameserver_add evdns_count_nameservers evdns_clear_nameservers_and_suspend evdns_resume evdns_nameserver_ip_add evdns_resolve_ipv4 evdns_resolve_reverse evdns_resolv_conf_parse evdns_config_windows_nameservers evdns_search_clear evdns_search_add evdns_search_ndots_set evdns_set_log_fn(3)
asynchronous functions for DNS resolution
exact.conf(5)
exact(8) configuration file
exconfig(3)
Using the configuration routines. Allegro game programming library
expire.ctl(5)
Configuration file for article expiration
explain_fpathconf(3)
explain fpathconf(3) errors require_index { "explain_fpathconf(3)" "explain fpathconf(3) errors" }
explain_fpathconf_or_die(3)
get file configuration and report errors require_index { "explain_fpathconf_or_die(3)"
explain_pathconf(3)
explain pathconf(3) errors require_index { "explain_pathconf(3)" "explain pathconf(3) errors" }
explain_pathconf_or_die(3)
get configuration values and report errors require_index { "explain_pathconf_or_die(3)"
ezbounce(1)
A highly configurable Internet Relay Chat (IRC) proxy
ezjail.conf(5)
configuration file for ezjail script
ezmlm-confirm(1)
process user actions for message confirm and discard
ezmlm-glconf(1)
create config file for global ezmlm-request address
ezmlm-web.cgi(1p), ezmlm-web(1p)
A web configuration interface to ezmlm mailing lists
ezmlmrc(5)
ezmlm-make configuration file
faxaddmodem(8c)
configure a modem for use with
faxconfig(8c)
dynamically change configuration parameters
fconf2(1), fconf2*(1)
Converts fidoconfig to another format
fcron.conf(5)
configuration file for fcron and fcrontab
fdm.conf(5)
fdm configuration file
ffproxy.conf(5)
filtering HTTP/HTTPS proxy server configuration file
fftw-wisdom-to-conf(1)
generate FFTW wisdom (pre-planned transforms)
filtermailex(5)
filtermail configuration file examples
filtermailrc(5)
filtermail configuration file
findlib.conf(5), R findlib.conf(5)
[Configuration of findlib/ocamlfind]c
fingerconf(5)
configuration file for pfinger
firestring_conf_add(3)
add an entry to a configuration structure
firestring_conf_delete(3)
remove an entry from a configuration structure
firestring_conf_find(3)
retrieve a value from a configuration structure
firestring_conf_find_next(3)
retrieve an array value from a configuration structure
firestring_conf_free(3)
free memory used by a configuration structure
firestring_conf_parse(3)
read and parse a configuration file
firestring_conf_parse_next(3)
add on to a previously parsed file
flexbackup.conf(5), /etc/flexbackup.conf(5)
a flexible backup/archiving tool configuration file
flickcurl-config(1)
script to get information about the installed version of flickcurl
flowd.conf(5)
NetFlow Collector daemon configuration file
fltk-config(1)
script to get information about the installed version of fltk
flush_config_file(3)
Flushes the current config file to disk. Allegro game programming library
fluxbox-apps(5)
per-window attribute configuration for fluxbox(1)
fluxbox-keys(5)
keyboard shortcuts configuration for fluxbox(1)
fmtutil.cnf(5)
configuration file for fmtutil
fnwrap(3bobcat), FnWrap(3bobcat)
Generic configurable context function wrapper class
fonts-conf(5), fonts.conf(5)
Font configuration files
fonulator(1)
foneBRIDGE configuration utility
foomatic-configure(1)
the main configuration program of the foomatic printing system
fpc.cfg(5)
Free Pascal Compiler (FPC) configuration file, name derived from Free Pascal Compiler
fpcmake(5), Makefile.fpc(5)
Configuration file for fpcmake
fpcmkcfg(1)
The Free Pascal configuration program
free-sa.conf(5)
Configuration file for free-sa statistic analyzer
free_config_entries(3)
Frees memory allocated for config entry lists. Allegro game programming library
freehdl-config(1), FreeHDL-CONFIG(1)
The FreeHDL configuration script
freeipmi.conf(5)
specify default values to FreeIPMI
freeipmi_interpret_sel.conf(5)
specify system event log (SEL) interpretation rules
freeipmi_interpret_sensor.conf(5)
specify sensor interpretation rules
freetds.conf(5)
configuration file for FreeTDS
freshclam.conf(5)
Configuration file for Clam AntiVirus database update tool
frox.conf(5)
configuration file for frox ftp proxy
fswatch.conf(5)
fswatch configuration file syntax
fswconf(1)
shows configuration
ftp-proxy.conf(5)
configuration file for FTP-Proxy
ftpaccess(5)
ftpd configuration file
ftpd.conf(5)
tnftpd(8) configuration file
ftpservers(5)
ftpd virtual hosting configuration specification file
ftpsesame(8)
automagic packet filter configurator for FTP
fusioninventory-agent-config(1)
FusionInventory Agent configuration script
fvwm-config(1)
query an existing FVWM installation
fvwm-convert-2.4(1)
convert FVWM 2.2.x configuration file to FVWM 2.4 syntax
fvwm-convert-2.6(1)
convert FVWM 2.4.x configuration file to FVWM 2.6.x style
fvwm-themes-config(1)
fvwm-themes manager and configurator
fwbuilder(1)
Multiplatform firewall configuration tool
g_confrms(1)
fits two structures and calculates the rmsd VERSION 4.5.4-dev-20110404-bc5695c
g_morph(1)
linear interpolation of conformations VERSION 4.5.4-dev-20110404-bc5695c
gammu-config(1)
Gammu configurator rst2man-indent-level 0 1 rstReportMargin \$1
gammu-smsdrc(5)
gammu-smsd(1) configuration file rst2man-indent-level 0 1 rstReportMargin \$1
gammurc(5)
gammu(1) configuration file rst2man-indent-level 0 1 rstReportMargin \$1
gbsplayrc(5)
Gameboy sound player configuration file
gcin-setup(1)
configuration tools of gcin
gconf-editor(1)
an editor for the GConf configuration system
gconfigger(1)
Tool to change/read GNOME configuration entry
gconftool-2(1)
GNOME configuration tool
gda-config(5), $(sysconfdir)/libgda/config(5)
libgda global configuration file. $(HOME)/.libgda/config - libgda user configuration file
gda-config-3.0(5), $(sysconfdir)/libgda/config(5)
libgda global configuration file. $(HOME)/.libgda/config - libgda user configuration file
gda-config-tool(1)
Tool for managing libgda configuration file
gda-config-tool-3.0(1)
Tool for managing libgda configuration file
gdome-config(1)
script to get information about the installed version of gdome2
genconf(1)
multiplies a conformation in 'random' orientations VERSION 4.5.4-dev-20110404-bc5695c
gentoo(1)
A highly configurable file manager for X
geoProj(3), GeoProj(3), GeoProjAlloc(3), GeoProjInit(3), GeoProjFree(3), GeoProjDestroy(3), GeoProjGetInfo(3), GeoProjGetType(3), GeoProjDescriptor(3), ProjToLatLon(3), LatLonToProj(3), SetCylEqDist(3), SetCylEqArea(3), SetMercator(3), SetLambertConfConic(3), SetLambertEqArea(3), SetStereographic(3), SetOrthographic(3), GeoProjSetRotation(3)
apply cartographic projections to geographic and map coordinates
get_config_argv(3)
Reads a token list from the configuration file. Allegro game programming library
get_config_float(3)
Retrieves a float from the configuration file. Allegro game programming library
get_config_hex(3)
Retrieves a hexadecimal value from the configuration file. Allegro game programming library
get_config_id(3)
Retrieves a driver ID from a configuration file. Allegro game programming library
get_config_int(3)
Retrieves an integer from the configuration file. Allegro game programming library
get_config_string(3)
Retrieves a string from the configuration file. Allegro game programming library
get_config_text(3)
Returns a string translated to the current language. Allegro game programming library
getsoundset(1x)
read current SoundSet configuration
getstyle(1x)
dumps the current Window Maker style related configuration or creates a theme pack
ggLoadConfig(3)
ggFreeConfig, ggConfigIterTarget, ggConfigIterLocation : Configuration helpers
ggz-config(6)
GGZ Gaming Zone configuration manager
ggz.modules(5)
GGZ Gaming Zone module configuration file
gicContextAllocate(3)
gicContextFree, gicContextAttachControl, gicContextDetachControl, gicContextLookupControl, gicContextGetControl, gicContextNumControls, gicContextGetName, gicContextWrite, gicContextRead, gicContextMapActions, gicContextFindConflict, gicContextHandleEvent : Contexts
gicControlAllocate(3)
gicControlFree, gicControlAttachFeature, gicControlDetachFeature, gicControlLookupFeature, gicControlGetFeature, gicControlNumFeatures, gicControlGetName, gicControlWrite, gicControlRead, gicControlMapActions, gicControlFindConflict, gicControlHandleEvent : Controls
gicFeatureMapActions(3)
gicFeatureFindConflict : Feature mappings
gicRecognizerTrain(3)
gicRecognizerTrainStart, gicRecognizerTrainStop, gicRecognizerTrainAdd, gicRecognizerTrainMove, gicRecognizerFindConflict, gicRecognizerGetName, gicRecognizerGetOpposite : Train recognizers
gimprc(5)
gimp configuration file
git-config(1)
Get and set repository or global options
git-mergetool(1)
Run merge conflict resolution tools to resolve merge conflicts
git-repo-config(1)
Get and set repository or global options
git-rerere(1)
Reuse recorded resolution of conflicted merges
gitweb.conf(5)
Gitweb (git web interface) configuration file
glXGetConfig(3), "glXGetConfig(3)
return information about GLX visuals
gl_get_line(3), new_GetLine(3), del_GetLine(3), gl_customize_completion(3), gl_change_terminal(3), gl_configure_getline(3), gl_load_history(3), gl_save_history(3), gl_group_history(3), gl_show_history(3), gl_watch_fd(3), gl_inactivity_timeout(3), gl_terminal_size(3), gl_set_term_size(3), gl_resize_history(3), gl_limit_history(3), gl_clear_history(3), gl_toggle_history(3), gl_lookup_history(3), gl_state_of_history(3), gl_range_of_history(3), gl_size_of_history(3), gl_echo_mode(3), gl_replace_prompt(3), gl_prompt_style(3), gl_ignore_signal(3), gl_trap_signal(3), gl_last_signal(3), gl_completion_action(3), gl_display_text(3), gl_return_status(3), gl_error_message(3), gl_catch_blocked(3), gl_list_signals(3), gl_bind_keyseq(3), gl_erase_terminal(3), gl_automatic_history(3), gl_append_history(3), gl_query_char(3), gl_read_char(3)
allow the user to compose an input line
glib-config(1)
script to get information about the installed version of GLib
glutGameModeString(3)
sets the game mode configuration via a string
gmond.conf(5)
configuration file for ganglia monitoring daemon (gmond)
gnome-config(1)
GNOME libraries and component information retrieval
gnome-mime(5)
configuration files
gnome-mount(1)
Mount drives and volumes using HAL and read settings from the GNOME desktop configuration system gconf
gnome-screensaver-preferences(1)
configure GNOME Screensaver
gnome-session-properties(1)
Configure applications to start on login
gnome-wm(1)
Start the window manager configured by the user
gnump3d.conf(1), GNUMP3d(1)
GNU MP3 / OGG Vorbis Streaming Server
gnutls_psk_netconf_derive_key(3)
API function
gofish(5), gofish.conf(5)
the configuration file for the GoFish gopher server
gogoc.conf(5)
gogoCLIENT Configuration File
gopherrc(5)
configuration file for gopher(1)
gosa.conf(5)
GOsa configuration file
gpgconf(1)
Modify .gnupg home directories
gpt-config(1)
Configure the current installation of GPT
gpt-flavor-configuration(1)
Permutes the build flavor choices found in the flavor configuration file
gpt-setup(1), gpt_setup(1)
Create automake and autoconf files to convert software into a package
gpt_build_config(1), globus_build_config(1)
Returns a minimized list of ldflags from a list of globus packages and external libraries
gpt_generate_bin_pkg_data(1), globus_build_config.pl(1)
Returns a minimized list of ldflags from a list of globus packages and external libraries
gpt_save_flavor(1), globus_build_config.pl(1)
Returns a minimized list of ldflags from a list of globus packages and external libraries
graphs.cfg(5)
Configuration of the showgraph CGI
greylist.conf(5)
milter-greylist configuration file
gsettings-data-convert(1)
GConf to GSettings data migration
gsettings-schema-convert(1)
GConf to GSettings schema conversion
gsi.conf(5)
configuration file for gsi_server(8)
gsl-config(1)
script to get version number and compiler flags of the installed GSL library
gst-config(1)
configuration for libgst
gtk-config(1)
script to get information about the installed version of GTK+
gtkwaverc(5)
GTKWave Configuration File
guestlist(5)
The secondary doormand configuration file
gv-update-userconfig(1)
update ~/.gv config file
gw6c.conf(5)
Gateway6 Client Configuration File
hastmon.conf(5)
configuration file for the hastmon(8) deamon and the hastmonctl(8) utility
hdup.conf(5)
the hdup configuration file
hesiod.conf(5)
Configuration file for the Hesiod library
hgrc(5)
configuration files for Mercurial rst2man-indent-level 0 1 rstReportMargin \$1
hinfo.conf(5), ~/.hinforc(5)
/etc/hinfo.conf /usr/local/etc/hinfo.conf
hlmaster.gameserver(1), "hlmaster.gameserver" "(1)
How to configure your gameserver to send heartbeats to hlmaster."
hmrc(4)
Hypermail configuration file
home.conf(5)
format of libhome configuration file
hook_config_section(3)
Hooks a configuration file section with custom handlers. Allegro game programming library
hosts.cfg(5)
Main Xymon configuration file
htdigconfig(8)
script to create fuzzy databases for ht://Dig
html2psrc(5)
configuration file format for html2ps(1)
httpd(1)
WWW server conforming to HTTP/1.1
httpd.conf(5)
XS-httpd configuration file
hylafax-config(5f), config(5f)
configuration database
i3-config-wizard(1)
creates a keysym based config based on your layout
i3-migrate-config-to-v4(1)
migrates your i3 config file
iauth.conf(5)
The Internet Relay Chat Authentication Configuration File
icmbuild(1)
A generic, easy configurable, program maintenance script
icu-config(1)
output ICU build options
idn.conf(5), .idnrc(5), idnalias.conf(5)
configuration files for idnkit library
idn2.conf(5), .idn2rc(5)
configuration files for idnkit version 2
idnalias.conf(5)
encoding alias file for idnkit
idnconv(1)
codeset converter for named.conf and zone master files
idnlang.conf(5)
language alias file for idnkit
idzebra-config(1)
Script to get information about idzebra
ietd.conf(5), /etc/ietd.conf(5)
configuration for iSCSI Enterprise Target Daemon
ifstated.conf(5)
Interface State daemon configuration file
igmpproxy.conf(5)
Configuration file for igmpproxy (8) multicast daemon
ijs-config(1)
script to get information about the installed version of ijs
iked.conf(5)
Internet Key Exchange Daemon Configuration File
im-ja-conf(1)
A configurator for the im-ja GTK2 Japanese input module
imapd.conf(5)
IMAP configuration file
imapfilter_config(5)
imapfilter configuration file
imlib-config(1)
Display Imlib and GDK-Imlib Library Configuration
imlib_config(1)
Imlib Configuration Editor
inadyn.conf(5)
configuration for the inadyn client for open DNS servers
incoming.conf(5)
names and addresses that feed us news
indent(3bobcat), FBB::Indent(3bobcat)
Configurable text indentation
indexer.conf(5)
configuration file for indexer
inn.conf(5)
Configuration data for InterNetNews programs
inncheck(8)
check inn configuration and database files
innconfval(1)
Get configuration parameters from inn.conf
innfeed.conf(5)
configuration file for innfeed
innupgrade(8)
Upgrade INN configuration files
install-sid(8)
update SUBMITTER variable in site or personal config files
iodbc-config(1)
script to get information about the installed version of iODBC
ipa.conf(5)
-- ipa(8) configuration file
ipastat.conf(5)
-- ipastat(8) configuration file
ipcad.conf(5)
ipcad configuration file
ipfm.conf(5)
IP Flow Meter configuration file
iplog.conf(5)
iplog configuration file
ipmi-chassis-config(8)
configure chassis fields
ipmi-pef-config(8)
configure PEF values
ipmi-sensors-config(8)
configure sensors
ipmidetect.conf(5)
specify alternate default values for the ipmidetect library
ipmidetectd.conf(5)
ipmidetectd configuration file
ipsec.conf(5)
IPsec configuration and connections
ircdwatch(8)
Daemon for monitoring ircd and ircd.conf
irs.conf(5)
Information Retrieval System configuration file
isakmpd.conf(5)
configuration file for isakmpd
isakmpd.policy(5)
policy configuration file for isakmpd
isc-config.sh(1)
Get information about the installed version of ISC BIND
iserv.conf(5)
iserverd config file
istat.conf(5)
configuration file for istatd
jabber.xml(5)
jabberd daemon configuration file
jails.conf(1)
FreeBSD 4.x/5.x/6.x jail management shellscript - configuration
javavm_opts.conf(5)
the Java VM wrapper options configuration file
javavms(5)
the Java VM wrapper configuration file
jfbterm.conf(5)
configuration file for jfbterm(1)
kavmilter(5), kavmilter.conf(5)
configuration file to sendmail antivirus filter, based on Milter API
kbuildsycoca4(8)
Rebuilds the system configuration cache
kdc.conf(5)
Kerberos V5 KDC configuration file
kde4-config(1)
Prints KDE installation paths
kgrubby(6)
Graphical configuration tool for the grubby chatbot
kismet.conf(5)
Wireless sniffing and monitoring configuration file
kismet_drone.conf(5)
Wireless sniffing and monitoring drone configuration file
knockcf(5), .knockcf(5)
The knock configuration file
krb5-config(1)
tool for linking against MIT Kerberos libraries
krb5.conf(5)
Kerberos configuration file
krb5_add_et_list(3), krb5_add_extra_addresses(3), krb5_add_ignore_addresses(3), krb5_context(3), krb5_free_config_files(3), krb5_free_context(3), krb5_get_default_config_files(3), krb5_get_dns_canonize_hostname(3), krb5_get_extra_addresses(3), krb5_get_fcache_version(3), krb5_get_ignore_addresses(3), krb5_get_kdc_sec_offset(3), krb5_get_max_time_skew(3), krb5_get_use_admin_kdc krb5_init_context(3), krb5_init_ets(3), krb5_prepend_config_files(3), krb5_prepend_config_files_default(3), krb5_set_config_files(3), krb5_set_dns_canonize_hostname(3), krb5_set_extra_addresses(3), krb5_set_fcache_version(3), krb5_set_ignore_addresses(3), krb5_set_max_time_skew(3), krb5_set_use_admin_kdc(3)
create, modify and delete krb5_context structures
krb5_appdefault_boolean(3), krb5_appdefault_string(3), krb5_appdefault_time(3)
get application configuration value
krb5_crypto_getblocksize(3), krb5_crypto_getconfoundersize krb5_crypto_getenctype(3), krb5_crypto_getpadsize(3), krb5_crypto_overhead(3), krb5_decrypt(3), krb5_decrypt_EncryptedData(3), krb5_decrypt_ivec(3), krb5_decrypt_ticket(3), krb5_encrypt(3), krb5_encrypt_EncryptedData(3), krb5_encrypt_ivec(3), krb5_enctype_disable(3), krb5_enctype_keysize(3), krb5_enctype_to_string(3), krb5_enctype_valid(3), krb5_get_wrapped_length(3), krb5_string_to_enctype(3)
encrypt and decrypt data, set and get encryption type parameters
l2-config(1)
OSSP l2 library build utility
l2tpd.conf(5)
L2TPD configuration file
l4p-tmpl(1), l4p-tmpl(1)
Print out a Log4perl template configuration
lament(6)
animates the Lament Configuration
laminfo(1)
Display configuration information about LAM/MPI
lcdproc-config(5)
format of LCDproc's configuration files
lcovrc(5)
lcov configuration file
ldap.conf(5), .ldaprc(5)
LDAP configuration file/environment variables
ldap_table(5)
Postfix LDAP client configuration
lftp.conf(5)
the global configuration file for lftp
lg.conf(5)
looking glass configuration file
lib3ds-config(1)
script to get information about the installed version of lib3ds
libao.conf(5)
configuration for libao
libart-config(1)
script to get information about the installed version of LIBART
libcfg+(3)
command line and configuration file parsing library
libgii.conf(5)
: LibGII configuration file format
libipmiconsole.conf(5)
specify default values for libipmiconsole
libmemcached_check_configuration(3)
libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1
libmemcached_configuration(3)
libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1
libmikmod-config(1)
script to get information about the installed version of libmikmod
libnetcfg(1)
configure libnet
libopenvas-config(1)
displays compiler/linker flags for the OpenVAS libraries
libretto-config(8)
TOSHIBA Libretto BIOS Setup Program
libssh2_keepalive_config(3)
short function description
libunbound(3), unbound.h(3), ub_ctx(3), ub_result(3), ub_callback_t(3), ub_ctx_create(3), ub_ctx_delete(3), ub_ctx_set_option(3), ub_ctx_get_option(3), ub_ctx_config(3), ub_ctx_set_fwd(3), ub_ctx_resolvconf(3), ub_ctx_hosts(3), ub_ctx_add_ta(3), ub_ctx_add_ta_file(3), ub_ctx_trustedkeys(3), ub_ctx_debugout(3), ub_ctx_debuglevel(3), ub_ctx_async(3), ub_poll(3), ub_wait(3), ub_fd(3), ub_process(3), ub_resolve(3), ub_resolve_async(3), ub_cancel(3), ub_resolve_free(3), ub_strerror(3), ub_ctx_print_local_zones(3), ub_ctx_zone_add(3), ub_ctx_zone_remove(3), ub_ctx_data_add(3), ub_ctx_data_remove(3)
Unbound DNS validating resolver 1.4.13 functions
libvga.config(5), svgalibrc(5)
the svgalib configuration file
lineakd(1)
GUI configurable support for multimedia keyboards
linkcheckerrc(5)
configuration file for LinkChecker
list_config_entries(3)
Lists the names of all entries in a config section Allegro game programming library
list_config_sections(3)
Lists the names of all sections available in the current configuration. Allegro game programming library
llvm-config(1)
Print LLVM compilation options
logsurfer.conf(4)
configuration file for logsurfer
lpadmin(8)
configure cups printers and classes
lpd.conf(5)
configuration file for the LPRng line printer spooler system
lprngtool(1)
configuration and Graphics User Interface for LPRng
lr_cron(1)
run the perodical jobs configured in a DlfStore
lr_environment(1)
Export Lire configuration in shell script form
lr_report_cfg2xml(1)
Convert old style report configuration to XML
lrzip.conf(5)
Configuration File for lrzip
lurker-list(1)
parses lists from the config file
lurker-params(1)
parses parameters from the config file
lwres_conf_init(3), lwres_conf_clear(3), lwres_conf_parse(3), lwres_conf_print(3), lwres_conf_get(3)
lightweight resolver configuration
lxinput(1)
a light-weight program to configure keyboard and mouse
m17n-config(1)
Print compile/link options of the m17n library
mach32info(6)
read out configuration information of a Mach32
magicfilter(8)
automatic configurable printer filter
mailto.conf(5)
configuration file for cups email notifier
mairixrc(5)
configuration file for mairix(1)
man2web.conf(5), "man2web.conf(5)
man2web configuration file." 4 Item "man2web.conf - man2web configuration file."
maptolayer(1)
Utility to generate layers.config files
masqmail.conf(5)
masqmail configuration file
masqmail.get(5)
masqmail get configuration file
masqmail.route(5)
masqmail route configuration file
master(5)
Postfix master process configuration file format
mconfig(1)
Utility for modifying .NET configuration files
mfschunkserver.cfg(5)
main configuration file for mfschunkserver
mfsmaster.cfg(5)
main configuration file for mfsmaster
mfsmetalogger.cfg(5)
configuration file for mfsmetalogger
mh-tailor(5), mts.conf(5)
mail transport customization for nmh message handler
mib2c.conf(5)
[em] How to write mib2c.conf files to do ANYTHING based on MIB input
micorc(5), ~/.micorc(5)
MICO configuration file format
mifare_desfire_connect(3), mifare_desfire_disconnect. mifare_desfire_authenticate(3), mifare_desfire_authenticate_aes(3), mifare_desfire_authenticate_iso(3), mifare_desfire_change_key_settings(3), mifare_desfire_get_key_settings(3), mifare_desfire_change_key(3), mifare_desfire_get_key_version(3), mifare_desfire_create_application(3), mifare_desfire_delete_application(3), mifare_desfire_get_application_ids(3), mifare_desfire_free_application_ids(3), mifare_desfire_select_application(3), mifare_desfire_format_picc(3), mifare_desfire_get_version(3), mifare_desfire_free_mem(3), mifare_desfire_set_configuration(3), mifare_desfire_set_default_key(3), mifare_desfire_set_ats(3), mifare_desfire_get_card_uid(3), mifare_desfire_get_file_ids(3), mifare_desfire_get_file_settings(3), mifare_desfire_change_file_settings(3), mifare_desfire_create_std_data_file(3), mifare_desfire_create_backup_data_file(3), mifare_desfire_create_value_file(3), mifare_desfire_create_linear_record_file(3), mifare_desfire_create_cyclic_record_file(3), mifare_desfire_delete_file(3), mifare_desfire_read_data(3), mifare_desfire_read_data_ex(3), mifare_desfire_write_data(3), mifare_desfire_write_data_ex(3), mifare_desfire_get_value(3), mifare_desfire_get_value_ex(3), mifare_desfire_credit(3), mifare_desfire_credit_ex(3), mifare_desfire_debit(3), mifare_desfire_debit_ex(3), mifare_desfire_limited_credit(3), mifare_desfire_limited_credit_ex(3), mifare_desfire_write_record(3), mifare_desfire_write_record_ex(3), mifare_desfire_read_records(3), mifare_desfire_read_records_ex(3), mifare_desfire_clear_record_file(3), mifare_desfire_commit_transaction(3), mifare_desfire_abort_transaction(3)
Mifare DESFire Manipulation Functions
mifluz-config(1)
print configuration information for the mifluz library
mimedefang-filter(5)
Configuration file for MIMEDefang mail filter
minput_config_command(3m17n)
Configure the key sequence of an input method command
minput_config_file(3m17n)
Get the name of per-user customization file
minput_config_variable(3m17n)
Configure the value of an input method variable
minput_save_config(3m17n)
Save configurations in per-user customization file
miredo-checkconf(8)
Miredo configuration file syntax checking tool
miredo-server.conf(5)
configuration for miredo-server
miredo.conf(5)
configuration for Miredo
mixminiond.conf(5)
Mixminion server configuration file
mixminionrc(5)
Mixminion client configuration file
mk-configure(7)
lightweight replacement for GNU autotools
mkcmake(1)
wrapper for bmake using mk-configure's Mk files and sys.mk
mkconfigure(1)
Compile BSDBuild configure scripts
mke2fs.conf(5)
Configuration file for mke2fs
mm-config(1)
OSSP mm library configuration/build utility
monitorix.conf(5)
Configuration file for Monitorix
mono-config(5)
Mono runtime file format configuration
mono-configuration-crypto(1)
Mono configuration utility to manage encryption keys and encrypt/decrypt config file sections
morebalance.conf(5)
configuration file for the morebalance load balancing tool
mp3lintrc(5)
configuration file for mp3lint
mrinfo(8)
displays configuration info from a multicast router
mrtg-reference(1)
MRTG 2.17.1 configuration reference
mrtg-webserver(1)
hints for web server configuration
mtailrc(5)
Configuration file for monkeytail
mtools(5), mtools.conf(5)
mtools configuration files '" t TQ \$1 . (is' (if` (pd" St Mtools 4.0.10 '\*(St''%' '%''\*(St'
mtoolstest(1)
tests and displays the configuration '" t TQ \$1 . (is' (if` (pd"
munin-node-configure(1)
View and modify which plugins are enabled
munin-node.conf(5)
Munin-node configuration file
munin.conf(5)
Munin configuration file
musetup(1), Musetup(1)
Configuration script for Museekd
musetup-gtk(1), Musetup-GTK(1)
PyGTK2 Configuration app for Museekd
musicpd.conf(5)
Music Player Daemon configuration file
muttrc(5)
Configuration file for the Mutt Mail User Agent
mydns-conf(8)
Sets up a MyDNS service
mydns.conf(5)
mydns(8) configuration file
mysql_config(1)
get compile options for compiling clients
mysql_plugin(1)
configure MySQL server plugins
mysql_table(5)
Postfix MySQL client configuration
named-checkconf(8)
named configuration file syntax checking tool
named.conf(5)
configuration file for named
nasd.conf(5)
Configuration file for NAS servers
nbsmtprc(5)
The no-brainer SMTP configuration file
ncid.conf(5)
ncid configuration file
ncid2ncid.conf(5)
ncid2ncid configuration file
ncidd.conf(5)
ncidd configuration file
ncidmodules.conf(5)
ncid module configuration file
ncidrotate.conf(5)
ncidrotate configuration file
ncidsip.conf(5)
ncidsip configuration file
ncurses5-config(1)
helper script for ncurses libraries
ncursesw5-config(1)
helper script for ncurses libraries
nefu.conf(4)
dependency map for nefu network monitor
neon-config(1)
script providing information about installed copy of neon library
net-snmp-config(1)
returns information about installed net-snmp libraries and binaries
net-snmp-create-v3-user(1)
create a SNMPv3 user in net-snmp configuration file
netamsctl(8)
command-line configuration tool for NeTAMS daemon
netatalk-config(1)
script to get information about the installed version of netatalk
netatalk.conf(5)
Configuration file used by Netatalk to determine its general configuration
netrikrc(5)
netrik configuration file
newscacheclean(8), test(8)
Purge the NewsCache to SpoolSize (newscache.conf parameter)
ngircd.conf(5)
configuration file of ngIRCd
noffle.conf(5)
Configuration file for NOFFLE news server
nsd-checkconf(8)
NSD configuration file checker
nsd.conf(5)
NSD configuration file
nslcd.conf(5)
configuration file for LDAP nameservice daemon
ntpd.conf(5)
Network Time Protocol daemon configuration file
nurbs++-config(1)
script to get information about the installed version of nurbs++
nut.conf(5)
UPS definitions for Network UPS Tools
nvidia-settings(1)
configure the NVIDIA graphics driver
nvidia-xconfig(1)
manipulate X configuration files for the NVIDIA driver
nvram_export(1)
Cisco 7200 NVRAM configuration export
nylon(1)
a lightweight and highly configurable proxy server
obconformer(1)
generate conformer coordinates
obrotamer(1)
generate conformer/rotamer coordinates
octave-config(1)
GNU Octave component and library information retrieval
oidentd.conf(5)
The oidentd configuration file
oidentd_masq.conf(5)
oidentd IP masquerading/NAT configuration file
olsrd.conf(5)
configuration file for olsrd(8)
onyx_config(1)
configuration helper for building with libonyx
openbox(1)
A minimalistic, highly configurable, next generation window manager with extensive standards support
opendkim.conf(5)
Configuration file for opendkim
openerp_serverrc(5)
configuration file for OpenERP
openmcu(1)
simple Multi Conference Unit using H.323
openscep.cnf(5)
OpenSCEP configuration file
openser.cfg(5), opneser.cfg(5)
openser configuration file
openvas-libnasl-config(1)
displays compiler/linker flags for NASL library
openvasd-config(1)
displays compiler/linker flags for the OpenVAS server
openxpki-configure(1)
Create OpenXPKI config files from meta-configuration
openxpki-metaconf(1)
OpenXPKI meta configuration utility
optionFileLoad(3)
Load the locatable config files, in order
oroborusrc(5)
oroborus(1) configuration file
orpierc(5)
is the configuration textfile for the orpie(1) console calculator
ospfd.conf(5)
Open Shortest Path First daemon configuration file
override_config_data(3)
Specifies a block of data containing config overrides. Allegro game programming library
override_config_file(3)
Specifies a file containing config overrides. Allegro game programming library
ovs-appctl(8)
utility for configuring running Open vSwitch daemons
ovs-vsctl(8)
utility for querying and configuring ovs-vswitchd
pacmd(1)
Reconfigure a PulseAudio sound server during runtime
pads.conf(8)
pads configuration file
pam_mount.conf(5)
Description of the pam_mount configuration file
pam_winbind.conf(5)
Configuration file of PAM module for Winbind
papd.conf(5)
Configuration file used by papd(8) to determine the configuration of printers used by the Netatalk printing daemon
paperconf(1)
print paper configuration informations
paperconfig(8)
configure the system default paper size
pbi.conf(5)
PBI Configuration File
pca_lookup_file(3), del_PathCache(3), del_PcaPathConf(3), new_PathCache(3), new_PcaPathConf(3), pca_last_error(3), pca_path_completions(3), pca_scan_path(3), pca_set_check_fn(3), ppc_file_start(3), ppc_literal_escapes(3)
lookup a file in a list of directories
pcap-config(1)
write libpcap compiler and linker flags to standard output
pconfig(6)
Print Empire configuration
pcre-config(1)
program to return PCRE configuration
pcre_config(3), PCRE(3)
Perl-compatible regular expressions
pdnsd.conf(5)
The configuration file for pdnsd config
pefs(8)
configure pefs file systems
personality(8)
system configuration management utility
pfqueue.conf(5)
pfqueue configuration file
pg_config(1)
retrieve information about the installed version of PostgreSQL
pgsql_table(5)
Postfix PostgreSQL client configuration
php-config(1)
get information about PHP configuration and compile options
pim6dd.conf(5)
config file for pim6dd, PIM for IPv6 dense mode daemon
pim6sd.conf(5)
config file for pim6sd, PIM-SM daemon for IPv6
pixilate(1)
parses an input file containing Cisco PIX 6.2x - PIX 6.3x (normal mask) or Cisco IOS (inverted mask) access-list entries and generates the corresponding packets. For information on writing PIX access lists, see http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/cmdref/ab.htm#xtocid7 and http://www.cisco.com/warp/public/707/confaccesslists.html#intro for Cisco IOS access-lists. is currently capable of generating TCP/UDP/ICMP (various ICMP types), and IGMP utilizing the Libnet 1.1.x library available from http://www.packetfactory.net. NOTE: Libnet 1.0.x is NOT compatible."
pk_config_data(5)
Configuration file for pkcsslotd
pkg-config(1)
Return metainformation about installed libraries
pkg_add_it.conf(5)
configuration file for pkg_add_it(1)
pkgtools.conf(5)
configuration file for the pkgtools suite
pksd.conf(5)
Public Key Server Daemon configuration file
plugger(7)
a streaming multimedia plugin for UNIX netscape pluggerrc - configure file for plugger
pmk(1)
configuring tool
pmk.conf(5)
premake configuration file
poconflicts(1)
Conflict finder for Gettext PO localization files
pokerconfigupgrade(8)
upgrade poker XML configuration files to match the software version
policyd-spf.conf(5), python-policyd-spf(5)
pure-Python Postfix policy daemon for SPF checking
policyd-weight.conf(5)
policyd-weight configuration parameters
polkit-config-file-validate(1)
Validate a PolicyKit configuration file
pop3lite.conf(5), /usr/local/etc/pop3lite.conf(5)
configuration file for pop3lite(8)
pop_config_state(3)
Pops a previously pushed configuration state. Allegro game programming library
popd.conf(5)
POP3 daemon configuration file
porestructure(1)
Restructure Gettxt PO files produced by poconflicts into the original directory tree for merging using pomerge
portconfig(1)
run make(1) targets on ports(7) that need updating
portfwd.cfg(5)
Portfwd configuration file
portshaker.conf(5)
format of the portshaker(8) configuration file
porttools(5), ~/.porttools(5)
FreeBSD Port Tools configuration file
posadisrc(5)
Configuration file for Posadis
postconf(1)
Postfix configuration utility
postconf(5)
Postfix configuration parameters
powerman.conf(5)
configuration file for PowerMan
ppd_get_num_conflicts(3)
Check a PPD file for conflicts
ppl-config(1)
obtain information about an installation of the Parma Polyhedra Library
pppoe-setup(8)
Shell script to configure Roaring Penguin PPPoE client
pppoe.conf(5)
Configuration file used by pppoe-start(8), pppoe-stop(8), pppoe-status(8) and pppoe-connect(8)
prayer.cf(5)
main Prayer configuration file
printers.conf(5)
printer configuration file for cups
privman_conf(5)
configuration file format for Privman managed applications
proftpd(8)
Professional configurable, secure file transfer protocol server
protocols.cfg(5)
Configuration of TCP network services
proxsmtpd.conf(5)
the configuration file for proxsmtpd(8)
ps2epsi(1)
generate conforming Encapsulated PostScript
psgconf(1)
modular, object-oriented system configuration framework
pshconfig(1)
Configuring the Perl Shell
psiconv-config(1)
script to get information about the installed version of Psiconv
pspell-config(1)
prints information about a libpspell installation
pt-config-diff(1)
Diff MySQL configuration files and server variables
pt_cparam_config_critcl(n), pt::cparam::configuration::critcl(n)
C/PARAM, Canned configuration, Critcl
pt_tclparam_config_snit(n), pt::tclparam::configuration::snit(n)
Tcl/PARAM, Canned configuration, Snit
pt_tclparam_config_tcloo(n), pt::tclparam::configuration::tcloo(n)
Tcl/PARAM, Canned configuration, Tcloo
pth-config(1)
Pth library build utility
pthread-config(1)
Pth pthread library build utility
ptop(1)
The FPC Pascal configurable source beautifier. Origin probably Pascal-TO-Pascal
ptop.cfg(5)
The ptop source-beautifier configuration file. ptop is the source beautifier of the FreePascal project. Origin probably Pascal-TO-Pascal.cfg
pulse-client.conf(5)
PulseAudio client configuration file
pulse-daemon.conf(5)
PulseAudio daemon configuration file
puppet-config(8)
Interact with Puppet's configuration options
puppet-queue(8)
Queuing daemon for asynchronous storeconfigs
push_config_state(3)
Pushes the current configuration state. Allegro game programming library
pvm_config(3)
Returns information about the present virtual machine configuration
pyx12.conf.xml(5)
Configuration file for pyx12
qadsl.conf(5)
qadsl configuration file
qconfirm(1)
manage addresses/ids in a qconfirm directory
qconfirm-accept(1)
confirms delivery of pending messages held by qconfirm-check
qconfirm-cdb-check(1)
match a mail address against a constant database
qconfirm-cdb-update(1)
maintain a constant database for the use with qconfirm-cdb-check(1)
qconfirm-check(1)
request delivery confirmation under qmail
qconfirm-check-mid(1)
checks headers of a mail message for known references
qconfirm-conf(1)
setup a qconfirm directory
qconfirm-control(1)
change qconfirm configuration through email
qconfirm-inject(1)
set Message-ID and VERP and send a mail message
qconfirm-notice(1)
handles delivery notifications for mail injected through qconfirm-inject(1)
qconfirm-return(1)
handles bounces from qconfirm-check(1)
qjail.conf(8)
The qjail default configuration file
qmail-control(5)
qmail configuration files
qmail-showctl(8)
analyze the qmail configuration files
quantlib-config(1)
compiler / linker flags for QuantLib
quickie-config(1)
print configuration parameters "quickie-config(1)" "print configuration parameters"
rabbitmq-env.conf(5)
default settings for RabbitMQ AMQP server
racluster(5), racluster.conf(5)
racluster flow model definitions
racoon.conf(5)
configuration file for racoon
radconf2xml(8)
converts radiusd.conf to XML
radium.conf(5)
radium resource file
radius.conf(5)
Configuration for nnrpd RADIUS authenticator
radiusd.conf(5)
configuration file for the FreeRADIUS server
radrelay.conf(5)
configuration file for the FreeRADIUS server "radrelay" personality
radsecproxy.conf(5)
Radsec proxy configuration file
radvd.conf(5)
configuration file of the router advertisement daemon radvd
raidfile-config(8)
Configure Box Backup's RAID files
raidfile.conf(5)
Userland RAID for Box Backup
raidutil(8)
RAID Management Configuration Utility
rancid(1)
Cisco configuration filter
rancid.conf(5)
rancid environment configuration file
rancid_intro(1)
introduction to the Really Awesome New Cisco confIg Differ
rapiconfig(1)
upload an XML config file to a SynCE connected device
raptor-config(1)
script to get information about the installed version of Raptor
rasqal-config(1)
script to get information about the installed version of the RDF query library
rast-config(1)
output Rast build options
razor-agent.conf(5), "razor-agent.conf"(5)
Configuration file for Razor Agents
rbldns-conf(8)
sets up an IP-address-listing DNS service
reader.conf(5)
configuration file for pcscd readers' drivers
readers.conf(5)
Access control and configuration for nnrpd
recoll.conf(5)
main personal configuration file for Recoll
redland-config(1)
script to get information about the installed version of Redland
refdb-bug(1)
RefDB tool: writes text file containing summary of RefDB's configuration
register_config_handler(3), register_const_config_handler(3), register_prenetsnmp_mib_handler(3), unregister_config_handler(3), register_mib_handlers(3), unregister_all_config_handlers(3), register_app_config_handler(3), register_app_prenetsnmp_mib_handler(3), unregister_app_config_handler(3), read_configs(3), read_premib_configs(3), read_config_print_usage(3), config_perror(3), config_pwarn(3)
netsnmp_config_api functions
relayd.conf(5)
relay daemon configuration file
reload_config_texts(3)
Reloads translated strings returned by get_config_text(). Allegro game programming library
repair(1)
Repair conflicts in the Coda Distributed File System
resolvconf(8)
manage nameserver information
resolver(5)
resolver configuration file
rndc-confgen(8)
rndc key generation tool
rndc.conf(5)
rndc configuration file
router.db(5)
rancid group configuration file
roxterm-config(1)
terminal emulator
rplay.conf(5)
rplay sound database
rrdbot.conf(5)
configuration files for rrdbotd(8)
rschedule(1)
User interface for Perl Schedule::Load configuration and status
rssh.conf(5), ${prefix}/etc/rssh.conf(5)
configuration file for rssh
rsyncd.conf(5)
configuration file for rsync in daemon mode
rsyslog.conf(5)
rsyslogd(8) configuration file
rudeconfig(3)
read and manipulate .ini and config files
rudiments-config(1)
helper script for rudiments library
sane-config(1)
get information about the installed version of libsane
sane-usb(5)
USB configuration tips for SANE
sasl.conf(5)
SASL Configuration file for nnrpd
sasl_getconfpath_t(3)
The SASL callback to indicate location of the config files
sawfish-config(1)
The Sawfish Configurator
sb16config(8)
configuration utility for Granch SBNI16-SHDSL PCI modems
sc-config(1)
The sc-config program is used to obtain information about MPQC's compile time environment'
sccmilter.conf(5)
configuration file to sendmail spam control and canceling filter, based on Milter API
scepconf(1)
read configuration parameters of OpenSCEP
scrollkeeper-config(1)
print ScrollKeeper configuration information
scrollkeeper.conf(5)
ScrollKeeper configuration file
sdig.conf(5)
Configuration for the Switch Digger
sensor.conf(5)
Sensor Configuration file for rwflowpack and flowcap
ser(8)
very fast and configurable sip proxy
ser.cfg(5)
ser configuration file
serveez-config(1)
The Serveez configuration script
sesman.ini(5)
Configuration file for sesman(8)
set_config_data(3)
Sets a block of configuration data. Allegro game programming library
set_config_file(3)
Sets the configuration file. Allegro game programming library
set_config_float(3)
Writes a float in the configuration file. Allegro game programming library
set_config_hex(3)
Writes a hexadecimal integer in the configuration file. Allegro game programming library
set_config_id(3)
Writes a driver ID in the configuration file. Allegro game programming library
set_config_int(3)
Writes an integer in the configuration file. Allegro game programming library
set_config_string(3)
Writes a string in the configuration file. Allegro game programming library
setpci(8)
configure PCI devices
setsoundset(1x)
set current SoundSet configuration
sg_get_config(8)
sends a SCSI GET CONFIGURATION command (MMC-4 +)
sgmls(1)
a validating SGML parser An System Conforming to n .br International Standard ISO 8879 Standard Generalized Markup Language
shishi_cipher_confoundersize(3)
API function
showvte(1)
show build-time configuration of evilvte
sic-server(5)
format of the server configuration file used by sic(1)
siege.config(1)
builds a .siegerc template in the user's home directory
sievelog.conf(5)
sievelog rules file
sigit.rc(5)
configuration file for sigit
silc(1)
client for SILC, a secure and flexible conferencing network
silcd.conf(5)
format of configuration file for silcd
silk.conf(5)
SiLK site configuration file
silk_config(1)
Print SiLK compiling and linking information
sip2ncid.conf(5)
sip2ncid configuration file
siteconfig(1)
online configuration of FTP server (wzdftpd)
slack(8)
Sysadmin's lazy autoconfiguration kit
slack.conf(5)
configuration file for slack
slapd-config(5)
configuration backend to slapd
slapd.access(5)
access configuration for slapd, the stand-alone LDAP daemon
slapd.conf(5)
configuration file for slapd, the stand-alone LDAP daemon
slapd.plugin(5)
plugin configuration for slapd, the stand-alone LDAP daemon
slaptest(8)
Check the suitability of the OpenLDAP slapd.conf file
smail(5), smaildrct(5), smailrtrs(5), smailtrns(5), smailrtry(5), smailqual(5)
config, directors, routers, transports, retry, qualify: configuration files used by Smail
smailconf(5)
/usr/local/etc/smail/config: Smail global variables configuration
smaildrct(5)
/usr/local/etc/smail/directors: Smail configuration of local address handling
smailmeth(5)
/usr/local/etc/smail/methods/*: directory of host specific transports config files for Smail
smailqual(5)
/usr/local/etc/smail/qualify: Smail hostname qualification configuration
smailrtrs(5)
/usr/local/etc/smail/routers: Smail router configuration
smailrtry(5)
/usr/local/etc/smail/retry: Smail retry configuration
smailtrns(5)
/usr/local/etc/smail/transports: Smail transports configuration
smartd.conf(5)
SMART Disk Monitoring Daemon Configuration File
smb.conf(5)
The configuration file for the Samba suite
smbgetrc(5)
configuration file for smbget
smi_config(3), smiInit(3), smiExit(3), smiSetErrorLevel(3), smiGetFlags(3), smiSetFlags(3), smiLoadModule(3), smiGetPath(3), smiSetPath(3), smiReadConfig(3)
SMI library configuration routines
smokeping_config(5)
Reference for the SmokePing Config File
smokeping_examples(7)
Examples of Smokeping configuration
smtp-gated.conf(5)
The smtp-gated configuration file
sniffit(5)
configuration file for sniffit (name arbirtary)
snmp.conf(5)
configuration files for the Net-SNMP applications
snmp.conf(5)
snmp configuration file for cups
snmp_config(5)
handling of Net-SNMP configuration files
snmpconf(1)
creates and modifies SNMP configuration files
snmpd.conf(5)
configuration file for the Net-SNMP SNMP agent
snmpd.examples(5)
example configuration for the Net-SNMP agent
snmpd.internal(5)
internal configuration of the Net-SNMP agent
snmpnetstat(1)
display networking status and configuration information from a network entity via SNMP
snmptrapd.conf(5)
configuration file for the Net-SNMP notification receiver
sockd.conf(5)
Dante server configuration file syntax
socklog-conf(8)
sets up a socklog(8) service
socks.conf(5)
socks client configuration file syntax
softhsm.conf(5)
SoftHSM configuration file
soqt-config(1)
Display SoQt Library Configuration
source-highlight-settings(1), Source-highlight-settings(1)
utility that can be used to write a configuration file for GNU Source-highlight (and its library)
soxt-config(1)
Display SoXt Library Configuration
spamd.conf(5)
spamd configuration file
spamoracle.conf(5)
SpamOracle configuration file format
splat.conf(5)
Scalable Periodic LDAP Attribute Transmogrifier configuration file
spmfilter.conf(5)
configuration file for spmfilter
sqlite_table(5)
Postfix SQLite configuration
sqpack(1)
purges squish msgbases taken from fidoconfig
ss5.conf(5)
Configuration file for the ss5 daemon
ss5.ha(5)
Contains directives for centralized configuration management
ss5.pam(5)
Contains configuration lines for PAM authentication
ss5_gss(5), ss5.gss(5)
Enable GSS Kerberos authentication, integrity and confidentiality (see RFC 1961)
ssh_config(5)
OpenSSH SSH client configuration files
sshd_config(5)
OpenSSH SSH daemon configuration file
ssl-admin.conf(5)
configuration file for ssl-admin
ssltunnelrc(5)
SSL Tunnel client configuration file
ssmtp.conf(5)
ssmtp configuration file
sssd-ipa(5)
the configuration file for SSSD
sssd-krb5(5)
the configuration file for SSSD
sssd-ldap(5)
the configuration file for SSSD
sssd-simple(5)
the configuration file for SSSDs simple access-control provider
sssd.conf(5)
the configuration file for SSSD
sssd_krb5_locator_plugin(8)
the configuration file for SSSD
statgrab-make-mrtg-config(1)
generates MRTG configuration
statgrab-make-mrtg-index(1)
generates MRTG configuration
storage.conf(5)
configuration file for storage manager
str-config(1)
Str library build utility
strongswan.conf(5)
strongSwan configuration file
subscriptions.conf(5)
subscriptions file for cups
sudosh.conf(5)
configuration file for sudosh
supybot-adduser(1)
Adds a user to a Supybot users.conf file
supybot-wizard(1)
A wizard for creating Supybot configuration files
surfraw-update-path(1)
updates PATH in shell config files
svnserve.conf(5)
Repository configuration file for svnserve
swapd.conf(5)
swapd configuration file
swish++.conf(4)
SWISH++ configuration file format
synce-matchmaker(1)
Configure/view a device's partnership status
synce-serial-config(8)
Configure a serial device for use with SynCE
synce_get_directory(3)
get synce configuration directory
sysconftool(1)
install configuration files
sysconftool(7)
format of configuration files installed by sysconftool
sysconftoolcheck(1)
check a sysconftool configuration file
sysgather(1)
a configuration file mismanager $Ringlet: sysgather.pl 1027 2007-02-27 09:47:40Z roam $
sysinfo(8)
utility used to gather system configuration information
sysinfo.conf(5), /usr/local/etc/sysinfo.conf(5)
sysinfo(8) configuration file
syslog-ng.conf(5)
syslog-ng configuration file
syslog.conf(5)
syslogd(8) configuration file
sysmon.conf.man(8), sysmon.conf(8)
sysmond(man) configuration file
system-config-printer(1)
configure a CUPS server
system-config-printer-applet(1)
print job manager
tac_plus.conf(5)
tacacs+ daemon configuration file
taiclockd-conf(8)
configure supervise scripts to run taiclockd server
tapconvert(1)
convert Twisted configurations from one format to another
targets(5)
configuration file for iSCSI targets
taskrc(5)
Configuration file for the task(1) command
tc-configCcache(1), tc configCcache(1)
Configure Tinderbox ccache parameters
tc-configDistfile(1), tc configDistfile(1)
Configure Tinderbox distfile parameters
tc-configGet(1), tc configGet(1)
Print current Tinderbox configuration
tc-configJail(1), tc configJail(1)
Configure Tinderbox Jail parameters
tc-configTinderd(1), tc configTinderd(1)
Configure Tinderbox tinder daemon (tinderd) parameters
tcsd.conf(5)
configuration file for the trousers TCS daemon
terminator_config(5), ~/.config/terminator/config(5)
the config file for Terminator terminal emulator
test_configuration.pl(1)
Load your configuration to verify Nagios::Object is compatible with it. -c: path to your main configuration file -l: "relaxed" mode - allow unrecognized attributes on objects, default is strict
testparm(1)
check an smb.conf configuration file for internal correctness
texconfig(1)
configures teTeX texconfig-sys - configures teTeX system-wide
tigrc(5)
tig configuration file
timidity.cfg(5)
configure file of TiMidity++
tinc.conf(5)
tinc daemon configuration
tinydns-conf(8)
sets up a DNS publication service
tinyproxy.conf(5)
Tinyproxy HTTP proxy daemon configuration file
tn5250rc(5)
tn5250 and lp5250d configuration file
tntnet-config(1)
output compiler flags for tntnet usage
tntnet.conf(7), " ===================================================================== tntnet.conf(7)
configuration-file for tntnet (8) " =====================================================================
tntnet.properties(7), " ===================================================================== tntnet.properties(7)
configuration-file for tntnet (8) " =====================================================================
torksocks.conf(5)
configuration file for torksocks(8)
torrus_compilexml(1), compilexml(1)
Torrus XML configuration (re)compiler
torrus_configinfo(1), configinfo(1)
Displays useful statistics for all Torrus trees
torrus_configsnapshot(1), configsnapshot(1)
Generates a configuration snapshot for a Torrus tree
torrus_devdiscover(1), devdiscover(1)
Performs SNMP discovery and generates Torrus XML configuration file
torrus_rrddir2xml(1), rrddir2xml(1)
Searches a directory for RRD files and generates Torrus XML configuration file
torsocks.conf(5)
configuration file for torsocks(8)
tp-magic-config(1)
-- Helps creating 'Magic' tool plugins for Tux Paint(1)
tparser(1)
Parses Fidoconfig
tpop3d.conf(5)
configuration file for tpop3d(8)
tracker.cfg(5)
configuration file for the trackerd search daemon
trackerd.conf(5)
trackerd(8) configuration file
trickled.conf(5)
format of the configuration file used by trickled(8)
tsocks.conf(5)
configuration file for tsocks(8)
tuxpaint-config(1)
-- A configuration tool for Tux Paint, a drawing program for young children
tvmet-config(1)
script to get information about the installed version of tvmet
ucommon-config(1)
script to get information about ucommon library
unbound-checkconf(8)
Check unbound configuration file for errors
unbound.conf(5)
Unbound configuration file
unieject.conf(5)
Configuration file for unieject tool
updatedd-wrapper(1)
config- and cachefile support for updatedd
updatedd-wrapper.conf(5)
configuration file for updatedd-wrapper
ups.conf(5)
UPS definitions for Network UPS Tools
upsd.conf(5)
Configuration for Network UPS Tools upsd
upsmon.conf(5)
Configuration for Network UPS Tools upsmon
upssched.conf(5)
Configuration for upssched timer program
uscheduleconf(1)
configure a scheduling service
userneu.conf(5)
Configuration file of userneu(8)
utftpd.conf(5)
rules for utftpd
uuchk(8)
displays information from the UUCP configuration
uuconv(1)
convert UUCP configuration files
uuid-config(1)
OSSP uuid API build utility
v3_proto.conf(5)
config files for V3 proto modules
v4l-conf(8)
configure a video4linux driver
v5_proto.conf(5)
config files for V5 proto modules
val-config(1)
OSSP val build utility
var-config(1)
OSSP var library build utility
vchat(1)
user frontend to the VChat conference system
vchatctl(8)
VChat conference server control utility
vchatrc(5)
vchat(1) user configuration file
vcl(7), VCL(7)
Varnish Configuration Language rst2man-indent-level 0 1 rstReportMargin \$1
vdltodmx(1)
dmx configuration file parser and printer
verify_krb5_conf(8)
checks krb5.conf for obvious errors
vga_getmonitortype(3)
returns the monitor type configured
vga_getmousetype(3)
returns the mouse type configured
vic(1)
video conference
virt-pki-validate(1), virt-pki-validate(1)
validate libvirt PKI files are configured correctly
vlc-config(1)
script to get information about the installed version of libvlc
vncconfig(1)
configure and control a VNC server
vnstat.conf(5)
vnStat configuration file
vserver(8)
VChat conference server
vsftpd.conf(5)
config file for vsftpd
vtund.conf(5)
VTun(Virtual Tunnel) daemon configuration file
wackamole.conf(5)
Wackamole daemon configuration file
walldns-conf(8)
sets up a DNS wall service
wammu-configure(1), wammu-configurator(1)
program to configure Gammu engine (used by Wammu)
wbar-config(1)
gui from settings for wbar
weatherrc(5)
configuration file format for the weather (1) utility
whoson.conf(5)
whoson configuration file
wigwam(1)
check the Hiawatha webserver configuration for non-critical errors
wildmidi.cfg(5)
Config file for libWildMidi
winecfg(1)
Wine Configuration Editor
wired.conf(5)
wired(8) configuration file
wmakerconf(1)
configure the Window Maker X window manager
wmapplrc(5)
configuration file for wmappl
wmbiffrc(5)
configuration file for wmbiff (1)
wmclockmon-config(1)
A program to configure wmclockmon
wmconfig(1x)
Window Manager Config helper program
wmmaiload-config(1)
Configuration window for wmmaiload dockapp
wwwoffle.conf(5)
The configuration file for the proxy server for the World Wide Web Offline Explorer
wyrdrc(5)
is the configuration textfile for the wyrd(1) console calendar application
wzd-config(1)
retrieve information about the installed version of wzdftpd
x10config(5), x10config^(5)
Configuration file format for HEYU, an X-10 CM11A serial interface control program
x509v3_config(5)
X509 V3 certificate extension configuration format
xapian-config(1)
report information about the installed version of xapian
xawtvrc(5)
-- TV apps config file
xb-ldap-config(8)
X-Bone specific LDAP configuration
xbone.conf(5)
The X-Bone Node Daemon configuration file
xconq(6)
X-based configurable strategy game
xconv(8), xconv.pl(8)
inetd.conf to xinetd.conf converter
xdmxconfig(1)
a graphical configuration tool for Xdmx configuration files
xdriinfo(1)
query configuration information of DRI drivers
xfce4-notifyd-config(1)
configuration GUI for xfce4-notifyd
xfmouse(1)
Mouse configurator for "The Cholesterol Free Desktop Environment"
xft-config(1)
report Xft version, compiler, linker, and/or installation
xine-config(1)
script to get information about the installed version of libxine
xinetd.conf(5)
Extended Internet Services Daemon configuration file
xinput(1)
utility to configure and test X input devices
xmbind(1)
Configures virtual key bindings "xmbind"
xmedcon-config(1)
script to get info about the installed version of (X)MedCon
xml2-config(1), xml-config(1)
script to get information about the installed version of GNOME-XML
xmlsec1-config(1)
detail installed version of xmlsec library
xneurrc(5)
configuration file for XNeur
xorg.conf(5)
configuration File for Xorg X server
xosd-config(1)
script to get information about the installed version of libxosd
xpdfrc(5)
configuration file for Xpdf tools (version 3.02)
xrdp.ini(5)
Configuration file for xrdp(8)
xsconf(5), .xsconf(5)
XS-httpd local configuration file
xstow.ini(5)
config file for XStow
xymon-xmh(5), Xymon XMH variables(5)
Configuration items available online
yac2ncid.conf(5)
yac2ncid configuration file
yafic.conf(5)
-- yafic(1) configuration file
yate-config(8)
retrieve metainformation about the YATE telephony engine
yaws.conf(5), /usr/local/etc/yaws/yaws.conf(5)
Configuration file for the yaws web server
yaz-config(1)
Script to get information about YAZ
yazpp-config(1)
Script to get information about YAZ++
ypostrc(5), ~/.ypostrc(5)
ypost configuration file
zathurarc(5)
zathura configuration file rst2man-indent-level 0 1 rstReportMargin \$1
zdbases.conf(5zm), TBW: dbases.conf(5zm)
Centralized database setup for the ZMailer's router (8zm)
zmailer.conf(5zm), zmailer.conf (5zm)
file format
znc-config(1)
script to get information about the installed version of ZNC
Ace::Browser::SiteDefs(3)
Access to AceBrowser configuration files
Alzabo::Config(3)
Alzabo configuration information
Alzabo::GUI::Mason::Config(3)
Alzabo Mason GUI configuration information
Apache2::Directive(3)
Perl API for manipulating the Apache configuration tree
Apache2::PerlSections(3)
write Apache configuration files in Perl
Apache::Admin::Config(3)
A module to read/write Apache like configuration files
Apache::ConfigFile(3)
Parse an Apache style httpd.conf configuration file
Apache::ConfigParser(3)
Load Apache configuration files
Apache::ConfigParser::Directive(3), Apache::ConfigParser::Directive(3)
An Apache directive or start context
Apache::MyConfig(3)
build options access
Apache::SOAP(3)
mod_perl-based SOAP server with minimum configuration
Apache::TestConfig(3)
-- Test Configuration setup module
Apache::TestRunPHP(3)
configure and run a PHP-based test suite
Apache::XMLRPC::Lite(3)
mod_perl-based XML-RPC server with minimum configuration
Apache::httpd_conf(3)
Generate an httpd.conf file
App::Build(3)
extends Module::Build to build/install/configure entire applications (i.e. web applications), not just modules and programs
App::CLI::Extension::Component::Config(3)
for App::CLI::Extension config module
App::GitGot::Command::add(3)
add a new repo to your config
App::GitGot::Command::clone(3)
clone a remote repo and add it to your config
App::GitGot::Command::remove(3)
remove a managed repository from your config
App::Options(3)
Combine command line options, environment vars, and option file values (for program configuration)
AppConfig(3)
Perl5 module for reading configuration files and parsing command line arguments
AppConfig::Args(3)
Perl5 module for reading command line arguments
AppConfig::CGI(3)
Perl5 module for processing CGI script parameters
AppConfig::File(3)
Perl5 module for reading configuration files
AppConfig::Getopt(3)
Perl5 module for processing command line arguments via delegation to Getopt::Long
AppConfig::State(3)
application configuration state
AppConfig::Std(3)
subclass of AppConfig that provides standard options
AppConfig::Sys(3)
Perl5 module defining platform-specific information and methods for other AppConfig::* modules
BIND::Conf_Parser(3)
Parser class for BIND configuration files
BIND::Config::Parser(3)
Parse BIND Config file
Badger::Class::Config(3)
class mixin for configuration
Badger::Config(3)
configuration module
Bio::Biblio::Proceeding(3)
Representation of a conference proceeding
Bio::Graphics::ConfiguratorI(3)
A sectioned map of configuration options (a map of maps), with a default section. Intended to augment existing tag->value semantics (ie. of Bio::AnnotationCollectionI) for object-representation information (eg. foreground color), and for general interface preferences (eg. image width in gbrowse)
Bio::Graphics::FeatureDir(3)
-- A directory of feature files and conf files
Bio::Graphics::RendererI(3)
A renderer for the Bio::Graphics class that renders Bio::SeqFeature::CollectionI objects onto Bio::Graphics::Panels using configuration information provided by a Bio::Graphics::ConfiguratorI
Bio::Seq::SeqBuilder(3)
Configurable object builder for sequence stream parsers
Brackup::Config(3)
configuration parsing/etc
CGI::Application::Plugin::Config::YAML(3)
add Config::YAML support to CGI::Application
CGI::Application::Plugin::ConfigAuto(3)
Easy config file management for CGI::Application
CGI::Builder::Conf(3)
Add user editable configuration files to your WebApp
CGI::Ex::Conf(3)
Conf Reader/Writer for many different data format types
CGI::Kwiki::Config(3)
Config Base Class for CGI::Kwiki
CGI::Kwiki::Config_yaml(3)
Simplistic YAML Config Parser for CGI::Kwiki
CPAN::Reporter::Config(3)
Config file options for CPAN::Reporter
CPAN::Testers::Fact::PerlConfig(3)
Perl build and configuration information for a CPAN Testers report
CPAN::Testers::Fact::TestOutput(3)
output from configuration, build and test
Carp::Datum::Cfg(3)
Dynamic Debug Configuration Setting for Datum
Catalyst::Authentication::Realm::SimpleDB(3)
A simplified Catalyst authentication configurator
Catalyst::Plugin::Authentication::Store::Htpasswd(3)
Authentication database in "$c->config"
Catalyst::Plugin::ConfigLoader(3)
Load config files of various types
Catalyst::Plugin::ConfigLoader::Environment(3)
Configure your application with environment variables
Catalyst::Plugin::ConfigLoader::Manual(3)
Guide to using the ConfigLoader plugin
Catalyst::Plugin::Setenv(3)
Allows you to set up the environment from Catalyst's config file
Catalyst::Plugin::SmartURI(3)
Configurable URIs for Catalyst
CatalystX::SimpleLogin::Controller::Login(3)
Configurable login controller
Cisco::Reconfig(3)
Parse and generate Cisco configuration files
Class::Data::ConfigHash(3)
Add Catalyst-Style Config To Your Class
CommitBit::Action::ConfirmEmail(3)
Confirm a user's email address
Config::Any(3)
Load configuration from different file formats, transparently
Config::Any::Base(3)
Base class for loaders
Config::Any::General(3)
Load Config::General files
Config::Any::INI(3)
Load INI config files
Config::Any::JSON(3)
Load JSON config files
Config::Any::Perl(3)
Load Perl config files
Config::Any::XML(3)
Load XML config files
Config::Any::YAML(3)
Load YAML config files
Config::ApacheFormat(3)
use Apache format config files
Config::Auto(3)
Magical config file parser
Config::AutoConf(3)
A module to implement some of AutoConf macros in pure perl
Config::Fast(3)
extremely fast configuration file parser
Config::General(3)
Generic Config Module
Config::General::Extended(3)
Extended access to Config files
Config::General::Interpolated(3)
Parse variables within Config files
Config::GitLike(3)
git-compatible config file parsing
Config::GitLike::Cascaded(3)
git-like config file parsing with cascaded inheritance
Config::GitLike::Git(3)
load Git configuration files
Config::Grammar(3)
A grammar-based, user-friendly config parser
Config::Grammar::Dynamic(3)
A grammar-based, user-friendly config parser
Config::INI(3)
simple .ini-file format
Config::INI::Reader(3)
a subclassable .ini-file parser
Config::INI::Simple(3)
Simple reading and writing from an INI file--with preserved comments, too!
Config::INI::Writer(3)
a subclassable .ini-file emitter
Config::IniFiles(3)
A module for reading .ini-style configuration files
Config::IniHash(3)
Perl extension for reading and writing INI files
Config::IniRegEx(3)
Ini workaround, regex search for parameters and sections
Config::JFDI(3)
Just * Do it: A Catalyst::Plugin::ConfigLoader-style layer over Config::Any
Config::JSON(3)
A JSON based config file system
Config::MVP(3)
multivalue-property package-oriented configuration
Config::MVP::Assembler(3)
multivalue-property config-loading state machine
Config::MVP::Assembler::WithBundles(3)
a role to make assemblers expand bundles
Config::MVP::Reader(3)
object to read config from storage into an assembler
Config::MVP::Reader::Findable(3)
a config class that Config::MVP::Reader::Finder can find
Config::MVP::Reader::Findable::ByExtension(3)
a Findable Reader that looks for files by extension
Config::MVP::Reader::Finder(3)
a reader that finds an appropriate file
Config::MVP::Reader::Hash(3)
a reader that tries to cope with a plain old hashref
Config::MVP::Reader::INI(3)
an MVP config reader for .ini files
Config::MVP::Section(3)
one section of an MVP configuration sequence
Config::MVP::Sequence(3)
an ordered set of named configuration sections
Config::Model(3)
Create tools to validate, migrate and edit configuration files
Config::Model::Annotation(3)
Read and write configuration annotations
Config::Model::AnyId(3)
Base class for hash or list element
Config::Model::AnyThing(3)
Base class for configuration tree item
Config::Model::Backend::Any(3)
Virtual class for other backends
Config::Model::Backend::Debian::Dpkg(3)
Read and write config as plain file
Config::Model::Backend::Debian::Dpkg::Control(3)
Read and write Debian Dpkg control information
Config::Model::Backend::Debian::Dpkg::Copyright(3)
Read and write Debian Dpkg License information
Config::Model::Backend::Debian::Dpkg::Patch(3)
Read and write Debian Dpkg Patch information
Config::Model::Backend::Debian::DpkgSyntax(3)
Role to read and write files with Dpkg syntax
Config::Model::Backend::Fstab(3)
Read and write config from fstab file
Config::Model::Backend::IniFile(3)
Read and write config as a INI file
Config::Model::Backend::PlainFile(3)
Read and write config as plain file
Config::Model::Backend::ShellVar(3)
Read and write config as a "SHELLVAR" data structure
Config::Model::Backend::Yaml(3)
Read and write config as a YAML data structure
Config::Model::BackendMgr(3)
Load configuration node on demand
Config::Model::CheckList(3)
Handle check list element
Config::Model::Cookbook::CreateModelFromDoc(3)
Create a configuration model from application documentation
Config::Model::Debian::Dependency(3)
Checks Debian dependency declarations
Config::Model::Describe(3)
Provide a description of a node element
Config::Model::DumpAsData(3)
Dump configuration content as a perl data structure
Config::Model::Dumper(3)
Serialize data of config tree
Config::Model::Exception(3)
Exception mechanism for configuration model
Config::Model::FuseUI(3)
Fuse virtual file interface for Config::Model
Config::Model::HashId(3)
Handle hash element for configuration model
Config::Model::IdElementReference(3)
Refer to id element(s) and extract keys
Config::Model::Instance(3)
Instance of configuration tree
Config::Model::Iterator(3)
Iterates forward or backward a configuration tree
Config::Model::ListId(3)
Handle list element for configuration model
Config::Model::Lister(3)
List available models and applications
Config::Model::Loader(3)
Load serialized data into config tree
Config::Model::Manual::ModelCreationAdvanced(3)
Creating a model with advanced features
Config::Model::Manual::ModelCreationIntroduction(3)
Introduction to model creation with Config::Model
Config::Model::Node(3)
Class for configuration tree node
Config::Model::ObjTreeScanner(3)
Scan config tree and perform call-backs
Config::Model::Report(3)
Reports data from config tree
Config::Model::SearchElement(3)
Search an element in a configuration model
Config::Model::SimpleUI(3)
Simple interface for Config::Model
Config::Model::TermUI(3)
Provides Config::Model UI a la Term::ReadLine
Config::Model::Tester(3)
Test framework for Config::Model
Config::Model::TreeSearcher(3)
Search tree for match in value, description
Config::Model::Value(3)
Strongly typed configuration value
Config::Model::Value::LayeredInclude(3)
Include a sub layer configuration
Config::Model::ValueComputer(3)
Provides configuration value computation
Config::Model::WarpedNode(3)
Node that change config class properties
Config::Model::Warper(3)
Warp tree properties
Config::Model::models::Debian::Dpkg(3)
Configuration class Debian::Dpkg
Config::Model::models::Debian::Dpkg::Control(3)
Configuration class Debian::Dpkg::Control
Config::Model::models::Debian::Dpkg::Control::Binary(3)
Configuration class Debian::Dpkg::Control::Binary
Config::Model::models::Debian::Dpkg::Control::Source(3)
Configuration class Debian::Dpkg::Control::Source
Config::Model::models::Debian::Dpkg::Copyright(3)
Configuration class Debian::Dpkg::Copyright
Config::Model::models::Debian::Dpkg::Copyright::Content(3)
Configuration class Debian::Dpkg::Copyright::Content
Config::Model::models::Debian::Dpkg::Copyright::FileLicense(3)
Configuration class Debian::Dpkg::Copyright::FileLicense
Config::Model::models::Debian::Dpkg::Copyright::GlobalLicense(3)
Configuration class Debian::Dpkg::Copyright::GlobalLicense
Config::Model::models::Debian::Dpkg::Copyright::License(3)
Configuration class Debian::Dpkg::Copyright::License
Config::Model::models::Debian::Dpkg::Copyright::LicenseSpec(3)
Configuration class Debian::Dpkg::Copyright::LicenseSpec
Config::Model::models::Debian::Dpkg::Meta(3)
Configuration class Debian::Dpkg::Meta
Config::Model::models::Debian::Dpkg::Patch(3)
Configuration class Debian::Dpkg::Patch
Config::Model::models::Debian::Dpkg::Source(3)
Configuration class Debian::Dpkg::Source
Config::Model::models::Debian::Dpkg::Source::Options(3)
Configuration class Debian::Dpkg::Source::Options
Config::Model::models::Fstab(3)
Configuration class Fstab
Config::Model::models::Fstab::FsLine(3)
Configuration class Fstab::FsLine
Config::Model::models::LCDd(3)
Configuration class LCDd
Config::Model::models::LCDd::CFontz(3)
Configuration class LCDd::CFontz
Config::Model::models::LCDd::CFontz633(3)
Configuration class LCDd::CFontz633
Config::Model::models::LCDd::CFontzPacket(3)
Configuration class LCDd::CFontzPacket
Config::Model::models::LCDd::CwLnx(3)
Configuration class LCDd::CwLnx
Config::Model::models::LCDd::EyeboxOne(3)
Configuration class LCDd::EyeboxOne
Config::Model::models::LCDd::IOWarrior(3)
Configuration class LCDd::IOWarrior
Config::Model::models::LCDd::IrMan(3)
Configuration class LCDd::IrMan
Config::Model::models::LCDd::MD8800(3)
Configuration class LCDd::MD8800
Config::Model::models::LCDd::MtxOrb(3)
Configuration class LCDd::MtxOrb
Config::Model::models::LCDd::NoritakeVFD(3)
Configuration class LCDd::NoritakeVFD
Config::Model::models::LCDd::SureElec(3)
Configuration class LCDd::SureElec
Config::Model::models::LCDd::bayrad(3)
Configuration class LCDd::bayrad
Config::Model::models::LCDd::curses(3)
Configuration class LCDd::curses
Config::Model::models::LCDd::ea65(3)
Configuration class LCDd::ea65
Config::Model::models::LCDd::g15(3)
Configuration class LCDd::g15
Config::Model::models::LCDd::glcd(3)
Configuration class LCDd::glcd
Config::Model::models::LCDd::glcdlib(3)
Configuration class LCDd::glcdlib
Config::Model::models::LCDd::glk(3)
Configuration class LCDd::glk
Config::Model::models::LCDd::hd44780(3)
Configuration class LCDd::hd44780
Config::Model::models::LCDd::icp_a106(3)
Configuration class LCDd::icp_a106
Config::Model::models::LCDd::imon(3)
Configuration class LCDd::imon
Config::Model::models::LCDd::imonlcd(3)
Configuration class LCDd::imonlcd
Config::Model::models::LCDd::irtrans(3)
Configuration class LCDd::irtrans
Config::Model::models::LCDd::joy(3)
Configuration class LCDd::joy
Config::Model::models::LCDd::lb216(3)
Configuration class LCDd::lb216
Config::Model::models::LCDd::lcdm001(3)
Configuration class LCDd::lcdm001
Config::Model::models::LCDd::lcterm(3)
Configuration class LCDd::lcterm
Config::Model::models::LCDd::lirc(3)
Configuration class LCDd::lirc
Config::Model::models::LCDd::lis(3)
Configuration class LCDd::lis
Config::Model::models::LCDd::mdm166a(3)
Configuration class LCDd::mdm166a
Config::Model::models::LCDd::menu(3)
Configuration class LCDd::menu
Config::Model::models::LCDd::ms6931(3)
Configuration class LCDd::ms6931
Config::Model::models::LCDd::mtc_s16209x(3)
Configuration class LCDd::mtc_s16209x
Config::Model::models::LCDd::mx5000(3)
Configuration class LCDd::mx5000
Config::Model::models::LCDd::picolcd(3)
Configuration class LCDd::picolcd
Config::Model::models::LCDd::pyramid(3)
Configuration class LCDd::pyramid
Config::Model::models::LCDd::sed1330(3)
Configuration class LCDd::sed1330
Config::Model::models::LCDd::sed1520(3)
Configuration class LCDd::sed1520
Config::Model::models::LCDd::serialPOS(3)
Configuration class LCDd::serialPOS
Config::Model::models::LCDd::serialVFD(3)
Configuration class LCDd::serialVFD
Config::Model::models::LCDd::server(3)
Configuration class LCDd::server
Config::Model::models::LCDd::shuttleVFD(3)
Configuration class LCDd::shuttleVFD
Config::Model::models::LCDd::sli(3)
Configuration class LCDd::sli
Config::Model::models::LCDd::stv5730(3)
Configuration class LCDd::stv5730
Config::Model::models::LCDd::svga(3)
Configuration class LCDd::svga
Config::Model::models::LCDd::t6963(3)
Configuration class LCDd::t6963
Config::Model::models::LCDd::text(3)
Configuration class LCDd::text
Config::Model::models::LCDd::tyan(3)
Configuration class LCDd::tyan
Config::Model::models::LCDd::ula200(3)
Configuration class LCDd::ula200
Config::Model::models::LCDd::vlsys_m428(3)
Configuration class LCDd::vlsys_m428
Config::Model::models::LCDd::xosd(3)
Configuration class LCDd::xosd
Config::Model::models::Multistrap(3)
Configuration class Multistrap
Config::Model::models::Multistrap::Section(3)
Configuration class Multistrap::Section
Config::Model::models::PopCon(3)
Configuration class PopCon
Config::Objective(3)
Perl module for parsing object-oriented config files
Config::Objective::Boolean(3)
boolean data type class for Config::Objective
Config::Objective::DataType(3)
base class for Config::Objective data types
Config::Objective::Hash(3)
hash data type class for Config::Objective
Config::Objective::Integer(3)
integer data type class for Config::Objective
Config::Objective::List(3)
list data type class for Config::Objective
Config::Objective::String(3)
string data type class for Config::Objective
Config::Objective::Table(3)
table data type class for Config::Objective
Config::Options(3)
module to provide a configuration hash with option to read from file
Config::Options::Threaded(3)
Threaded version of module to provide a configuration hash with option to read from file
Config::Perl::V(3)
Structured data retrieval of perl -V output
Config::Properties(3)
Read and write property files
Config::Record(3)
Configuration file access
Config::Setting(3)
Perl extension for configuration files
Config::Setting::Chunk(3)
Representation of a configuration file
Config::Setting::FileProvider(3)
return the contents of files
Config::Setting::IniParser(3)
parse windows .ini style files
Config::Setting::XMLParser(3)
parse XML settings file
Config::Simple(3)
simple configuration file class
Config::Std(3)
Load and save configuration files in a standard format
Config::Tiny(3)
Read/Write .ini style files with as little code as possible
Config::Wrest(3)
Read and write Configuration data With References, Environment variables, Sections, and Templating
Config::YAML(3)
Simple configuration automation
ConfigReader::Simple(3)
Simple configuration file parser
Configure(3), XMLTV::Configure(3)
Configuration file handling for XMLTV grabbers
Configure::Writer(3), XMLTV::Configure::Writer(3)
Configuration file writer for XMLTV grabbers
DBD::mysql::INSTALL(3), INSTALL(3)
How to install and configure DBD::mysql
DBIWrapper::XMLParser(3), XMLParser(3)
The XML Configuration Parser Module
DNSCheck::Config(3)
Read config files and make their contents available to other modules
Dancer::Config(3)
how to configure Dancer to suit your needs
Data::Localize::Trait::WithStorage(3)
Localizer With Configurable Storage
Data::Serializer::Config::General(3)
Creates bridge between Data::Serializer and Config::General
Data::Serializer::Config::Wrest(3)
Creates bridge between Data::Serializer and Config::Wrest
Date::Manip::Config(3)
Date::Manip configuration
Date::Manip::ConfigFile(3)
sample config file
Dist::CheckConflicts(3)
declare version conflicts for your dist
DocSet::Config(3), "DocSet::Config"(3)
A superclass that handles object's configuration and data
DocSet::RunTime(3), "DocSet::RunTime"(3)
RunTime Configuration
Emplacken(3)
Manage multiple plack apps with a directory of config files
Encode::Config(3)
-- internally used by Encode
ExtUtils::CChecker(3), "ExtUtils::CChecker"(3)
configure-time utilities for using C headers, libraries, or OS features
ExtUtils::MakeMaker::Config(3)
Wrapper around Config.pm
ExtUtils::PkgConfig(3)
simplistic interface to pkg-config
File::ChangeNotify::ConfigData(3)
Configuration for File::ChangeNotify
Gnome2::GConf(3)
API Reference Pod Index
Gnome2::GConf(3)
Perl wrappers for the GConf configuration engine
Gnome2::GConf::ChangeSet(3)
A set of configuration changes to be made
Gnome2::GConf::Engine(3)
A Configuration Engine
Gnome2::GConf::Entry(3)
Container Objects for key/value pairs
Gnome2::GConf::Schema(3)
Schema Objects for key description
Gnome2::GConf::Value(3)
Opaque datatype for generic values
Goo::ConfigFile(3)
Parse and load .goo files. Based loosely on .ini files
Goo::Thing::conf::ConfigProfiler(3)
Profile a config file
Goo::Thing::goo::Maker(3)
Make a new Thing by creating a .goo configuration file
Gungho::Manual::FAQ(3)
Gungho FAQ n .SH "Q. ""Why Did You Call It Gungho""?" .SH "Q. ``Why Did You Call It Gungho''?" Header "Q. Why Did You Call It Gungho?" It rhymes with Xango, which is its predecessor. n .SH "Q. ""I don't understand the notation of the config""" .SH "Q. ``I don't understand the notation of the config''" Header "Q. I don't understand the notation of the config" To make the notation concise, we use a notation like engine.module = POE. Each level is a key in the hash, so the previous example translates to a config like my $config = { engine => { module => "POE" } } Or, in YAML: engine: module: POE n .SH "Q. ""My requests are being served slow. What can I do?""" .SH "Q. ``My requests are being served slow. What can I do?''" Header "Q. My requests are being served slow. What can I do?" There are actually a number of things that may affect fetch speed
HTML::FormHandler::Field::PasswordConf(3)
password confirmation
HTML::Mason::Params(3)
Mason configuration parameters
HTTP::Config(3)
Configuration for request and response objects
IO::Interface(3)
Perl extension for access to network card configuration information
IO::Interface::Simple(3)
Perl extension for access to network card configuration information
IOC::Config::XML(3)
An XML Config reader for IOC
IOC::Config::XML::SAX::Handler(3)
An XML::SAX handler to read IOC Config files
Jifty::Config(3)
the configuration handler for Jifty
Jifty::Plugin::Authentication::Password::Action::ConfirmEmail(3)
Confirm a user's email address
Jifty::Plugin::Authentication::Password::Action::ResendConfirmation(3)
resend confirmation for new mail or password
Jifty::Plugin::Authentication::Password::Action::ResetLostPassword(3), Jifty::Plugin::Authentication::Password::Action::ResetPassword(3)
Confirm and reset a lost password
Jifty::Plugin::Authentication::Password::Action::SendAccountConfirmation(3)
send confirmation for an email
Jifty::Plugin::Authentication::Password::Notification::ConfirmEmail(3)
mail notification to confirm email
Jifty::Plugin::Authentication::Password::Notification::ConfirmLostPassword(3)
mail notification to change password
Jifty::Plugin::Config::Action::AddConfig(3)
add a configuration entry
Jifty::Plugin::Config::Action::Config(3)
Register config
Jifty::Plugin::Config::Dispatcher(3)
dispatcher of the Config plugin
Jifty::Plugin::Config::View(3)
Templates for Config plugin
Jifty::Subs(3)
Configure subscriptions for the current window or session
Log::Dispatch::Config(3)
Log4j for Perl
Log::Dispatch::Configurator(3)
Abstract Configurator class
Log::Dispatch::Configurator::Any(3)
Configurator implementation with Config::Any
Log::Dispatch::Configurator::AppConfig(3)
Configurator implementation with AppConfig
Log::Dispatch::Configurator::YAML(3)
Configurator implementation with YAML
Log::Handler::Config(3)
The main config loader
Log::Handler::Plugin::Config::General(3)
Config loader for Config::General
Log::Handler::Plugin::Config::Properties(3)
Config loader for Config::Properties
Log::Handler::Plugin::YAML(3)
Config loader for YAML
Log::Log4perl::Config(3)
Log4perl configuration file syntax
Log::Log4perl::Config::BaseConfigurator(3)
Configurator Base Class
Log::Log4perl::Config::DOMConfigurator(3)
reads xml config files
Log::Log4perl::Config::PropertyConfigurator(3)
reads properties file
Log::Log4perl::Config::Watch(3)
Detect file changes
Log::Message::Config(3)
Configuration options for Log::Message
Log::Report::Die(3)
compatibility routines with Perl's die/croak/confess
Luka::Conf(3)
Configuration file interface class
MP3::Archive::Config(3)
Configuration handling for MP3::Archive
Mail::SpamAssassin::Conf(3)
SpamAssassin configuration file
Mail::SpamAssassin::Conf::LDAP(3)
load SpamAssassin scores from LDAP database
Mail::SpamAssassin::Conf::Parser(3)
parse SpamAssassin configuration
Mail::SpamAssassin::Conf::SQL(3)
load SpamAssassin scores from SQL database
Maypole::Config(3)
Maypole Configuration Class
ModPerl::Config(3)
Functions to retrieve mod_perl specific env information
Module::Build::ConfigData(3)
Configuration for Module::Build
Module::Build::Notes(3)
Create persistent distribution configuration modules
MojoMojo::Prefs(3)
info on MojoMojo configurable preferences MojoMojo has a number of preferences that can be set in "Site settings" ("/.admin"). If values are not set in the database, they are read from mojomojo.conf, or default values are used
Mojolicious::Plugin::Config(3)
Perl-ish configuration plugin
Mojolicious::Plugin::JSONConfig(3)
JSON configuration plugin
Monitor::Simple::Config(3)
See documentation in Monitor::Simple
Moose::Error::Confess(3)
Prefer "confess"
Moose::Meta::Role::Method::Conflicting(3)
A Moose metaclass for conflicting methods in Roles
MooseX::ConfigFromFile(3)
An abstract Moose role for setting attributes from a configfile
MooseX::SimpleConfig(3)
A Moose role for setting attributes from a simple configfile
MouseX::ConfigFromFile(3)
An abstract Mouse role for setting attributes from a configfile
Nagios::Config(3)
Parser for the Nagios::Object set of perl modules
Nagios::Config::File(3)
Base class for Nagios configuration files
Nagios::Object::Config(3)
Perl objects to represent Nagios configuration
Nagios::Plugin::Config(3)
read nagios plugin .ini style config files
Net::ACL::File(3)
Access-lists constructed from configuration file like syntax
Net::ACL::File::ASPath(3)
AS-path access-lists loaded from configuration string
Net::ACL::File::Community(3)
Community-lists loaded from configuration string
Net::ACL::File::IPAccess(3)
IP access-lists loaded from configuration string
Net::ACL::File::IPAccessExt(3)
Extended IP access-lists loaded from configuration string
Net::ACL::File::Prefix(3)
Prefix-lists loaded from configuration string
Net::ACL::File::RouteMap(3)
BGP Route-Maps loaded from configuration string
Net::ACL::File::Standard(3)
Standard access-lists loaded from configuration string
Net::BitTorrent::ConfigData(3)
Configuration for Net::BitTorrent
Net::Config(3)
Local configuration data for libnet
Net::DNS::Check::Test::ns_count(3)
Check if the number of NS RR are within the range set in the configuration object
Net::DNS::Check::Test::soa_expire_range(3)
Check if the expire time in the SOA RR is within the range set in the configuration object
Net::DNS::Check::Test::soa_refresh_range(3)
Check if the refresh time in the SOA RR is within the range set in the configuration object
Net::DNS::Check::Test::soa_retry_range(3)
Check if the retry time in the SOA RR is within the range set in the configuration object
Net::DNS::TestNS::DTD(3)
DTD for the TestNS configurationf file
Net::Delicious::Config(3)
config handler for Net::Delicious
Net::Delicious::Constants::Config(3)
constant variables for Net::Delicious default configs
Net::FTPServer(3)
A secure, extensible and configurable Perl FTP server
Net::LDAP::Config(3)
a simple wrapper for maintaining info related to LDAP connections
Net::SSH::Perl::Config(3)
Load and manage SSH configuration
Net::YASA::ConfigData(3)
Configuration for Net::YASA
OpenXPKI::Client::HTML::Mason::Config(3)
[One line description of module's purpose here]
OpenXPKI::Crypto::Backend::OpenSSL::Config(3), Header(3)
"Name" OpenXPKI::Crypto::Backend::OpenSSL::Config
OpenXPKI::XML::Cache(3), Header "Name" OpenXPKI::XML::Cache(3)
XML cache for configuration data
OpenXPKI::XML::Config(3), Header "Name" OpenXPKI::XML::Config(3)
interface to configuration data
PSGConf(3)
main Perl module for psgconf package
PSGConf::Action(3)
base class for PSGConf action types
PSGConf::Action::ChGrp(3)
chgrp file action type for psgconf
PSGConf::Action::ChMod(3)
chmod file action type for psgconf
PSGConf::Action::ChOwn(3)
chown file action type for psgconf
PSGConf::Action::CopyFile(3)
file-copy action class for PSGConf
PSGConf::Action::CreateFile(3)
create file action type for PSGConf
PSGConf::Action::Crontab(3)
root crontab action class for PSGConf
PSGConf::Action::File(3)
base class for psgconf file-generator action types
PSGConf::Action::GenerateFile(3)
file-generator action class for PSGConf
PSGConf::Action::GenerateFile::AppConfig(3)
generate environment files
PSGConf::Action::GenerateFile::BSD_exports(3)
action to generate /etc/exports
PSGConf::Action::GenerateFile::EnvFile(3)
generate environment files
PSGConf::Action::GenerateFile::Literal(3)
literal file-generation action
PSGConf::Action::GenerateFile::RC_Script(3)
action to generate RC scripts
PSGConf::Action::GenerateFile::SASL_conf(3)
generate SASL config files
PSGConf::Action::GenerateFile::TLI_hosts(3)
generate /etc/net/tic*/hosts files
PSGConf::Action::GenerateFile::auto_direct(3)
action to generate /etc/auto_direct
PSGConf::Action::GenerateFile::dfstab(3)
action to generate /etc/dfs/dfstab
PSGConf::Action::GenerateFile::dsm_opt(3)
generate TSM dsm.opt file
PSGConf::Action::GenerateFile::dsm_sys(3)
generate TSM dsm.sys file
PSGConf::Action::GenerateFile::etc_cshrc(3)
generate /etc/.cshrc file
PSGConf::Action::GenerateFile::etc_exports(3)
action to generate /etc/exports
PSGConf::Action::GenerateFile::etc_group(3)
generate /etc/group file
PSGConf::Action::GenerateFile::etc_master_passwd(3)
generate /etc/master.passwd file
PSGConf::Action::GenerateFile::etc_passwd(3)
generate /etc/passwd file
PSGConf::Action::GenerateFile::etc_profile(3)
generate /etc/profile file
PSGConf::Action::GenerateFile::etc_rpc(3)
generate /etc/rpc file
PSGConf::Action::GenerateFile::etc_security_passwd(3)
generate AIX /etc/security/passwd file
PSGConf::Action::GenerateFile::etc_services(3)
action to generate /etc/services
PSGConf::Action::GenerateFile::etc_shadow(3)
generate /etc/shadow file
PSGConf::Action::GenerateFile::etc_system(3)
generate Solaris /etc/system file
PSGConf::Action::GenerateFile::etc_user_attr(3)
generate /etc/user_attr file
PSGConf::Action::GenerateFile::ftpaccess(3)
generate ftpaccess file
PSGConf::Action::GenerateFile::hosts(3)
generate /etc/hosts file
PSGConf::Action::GenerateFile::hosts_allow(3)
generate /etc/hosts.allow file
PSGConf::Action::GenerateFile::httpd_conf(3)
generate httpd.conf file
PSGConf::Action::GenerateFile::inetd_conf(3)
generate inetd.conf files
PSGConf::Action::GenerateFile::ld_so_config(3)
generate ld.so.conf config file
PSGConf::Action::GenerateFile::logadm(3)
generate /etc/logadm.conf file
PSGConf::Action::GenerateFile::logrotate(3)
generate /etc/logrotate.conf file
PSGConf::Action::GenerateFile::mime_types(3)
action to generate Apache mime.types
PSGConf::Action::GenerateFile::named_conf(3)
generate named.conf file
PSGConf::Action::GenerateFile::netmasks(3)
generate /etc/netmasks file
PSGConf::Action::GenerateFile::newsyslog(3)
generate /etc/newsyslog.conf file
PSGConf::Action::GenerateFile::nsswitch_conf(3)
generate /etc/nsswitch.conf file
PSGConf::Action::GenerateFile::ntp_conf(3)
generate ntp.conf file
PSGConf::Action::GenerateFile::pam_conf(3)
generate /etc/pam.conf file
PSGConf::Action::GenerateFile::pam_file(3)
generate /etc/pam.d/* files
PSGConf::Action::GenerateFile::printcap(3)
generate /etc/printcap file
PSGConf::Action::GenerateFile::qpopper_conf(3)
generate qpopper.conf files
PSGConf::Action::GenerateFile::resolv_conf(3)
generate /etc/resolv.conf file
PSGConf::Action::GenerateFile::sendmail_aliases(3)
generate sendmail aliases file
PSGConf::Action::GenerateFile::sendmail_cf(3)
generate sendmail.cf file
PSGConf::Action::GenerateFile::sendmail_map(3)
generate sendmail map files
PSGConf::Action::GenerateFile::sendmail_mc(3)
generate sendmail.mc file
PSGConf::Action::GenerateFile::sendmail_trusted_users(3)
generate trusted-users file
PSGConf::Action::GenerateFile::sshd_config(3)
generate sshd_config file
PSGConf::Action::GenerateFile::sudoers(3)
generate /etc/sudoers file
PSGConf::Action::GenerateFile::syslog_conf(3)
generate /etc/syslog.conf file
PSGConf::Action::GenerateFile::tsm_inclexcl(3)
generate TSM inex.list file
PSGConf::Action::GenerateFile::workers_properties(3)
generate workers.properties file
PSGConf::Action::GenerateFile::xinetd_conf(3)
generate xinetd.conf file
PSGConf::Action::HomeDir(3)
home directory creation action class for PSGConf
PSGConf::Action::MkDir(3)
Directory creation action class for PSGConf
PSGConf::Action::MkNod(3)
mknod action class for PSGConf
PSGConf::Action::ModifyFile(3)
file-modification action class for PSGConf
PSGConf::Action::PackageManager(3)
Generic package install action
PSGConf::Action::PackageManager::Encap(3)
install Encap packages
PSGConf::Action::PackageManager::FTPArchive(3)
General tools to use to get package info from an FTP Archive
PSGConf::Action::PackageManager::FreeBSD(3)
install FreeBSD packages
PSGConf::Action::PackageManager::FreeBSD::Packages(3)
install FreeBSD packages
PSGConf::Action::PackageManager::FreeBSD::Ports(3)
install FreeBSD ports
PSGConf::Action::PackageManager::RedHat::RHN(3)
install RedHat packages
PSGConf::Action::PackageManager::RedHat::RPMS(3)
install RedHat packages
PSGConf::Action::PackageManager::RedHat::Yum(3)
install RedHat packages
PSGConf::Action::PackageManager::Solaris(3)
install Solaris packages
PSGConf::Action::RPMImportGPGKey(3)
Import a GPG key into the RPM db action class for PSGConf
PSGConf::Action::Remove(3)
file-removal action class for PSGConf
PSGConf::Action::RemoveCrontab(3)
crontab removal action class for PSGConf
PSGConf::Action::RestartDaemon(3)
Send defined signal to a given daemon
PSGConf::Action::RunCommand(3)
command-execution action class for PSGConf
PSGConf::Action::Symlink(3)
symlink action class for PSGConf
PSGConf::Action::TouchFile(3)
touch file action type for psgconf
PSGConf::Action::UntarFile(3)
file untar action class for PSGConf
PSGConf::Action::lpadmin(3)
Configure LP printers
PSGConf::Action::svcs::addpg(3)
setting svcs property action type for psgconf
PSGConf::Action::svcs::import(3)
setting svcs property action type for psgconf
PSGConf::Action::svcs::setprop(3)
setting svcs property action type for psgconf
PSGConf::Control(3)
base class for PSGConf control types
PSGConf::Control::AIX(3)
psgconf control class for AIX-specific files
PSGConf::Control::AnonFTP(3)
psgconf control class for anonymous FTP
PSGConf::Control::Apache(3)
psgconf control class for Apache
PSGConf::Control::Apache::FastCGI(3)
psgconf control class for Apache mod_fastcgi
PSGConf::Control::Apache::mod_jk(3)
psgconf control class for Apache mod_jk
PSGConf::Control::CachingDNS(3)
psgconf control class for caching DNS server
PSGConf::Control::Core(3)
psgconf control class for core system identity
PSGConf::Control::FreeBSD(3)
psgconf control class for FreeBSD-specific configuration
PSGConf::Control::InitScripts(3)
psgconf control class for Startup scripts
PSGConf::Control::Inittab(3)
psgconf control class for /etc/inittab
PSGConf::Control::LogFiles(3)
psgconf control class for Log File Rotation
PSGConf::Control::NFS_Client(3)
psgconf control class for NFS client
PSGConf::Control::NFS_Server(3)
psgconf control class for NFS servers
PSGConf::Control::NTP(3)
psgconf control class for NTP configuration
PSGConf::Control::NameServiceSwitch(3)
psgconf control class for nsswitch config
PSGConf::Control::Network(3)
psgconf control class for network configuration
PSGConf::Control::PAM(3)
psgconf control class for PAM configuration
PSGConf::Control::Packages(3)
psgconf control class for installing software
PSGConf::Control::PostgreSQL(3)
psgconf control class for PostgreSQL
PSGConf::Control::Printers(3)
psgconf control class for printer configuration
PSGConf::Control::RPC(3)
psgconf control class for RPC configuration
PSGConf::Control::RPC::rstatd(3)
psgconf control class for rstatd configuration
PSGConf::Control::RedHat(3)
psgconf control class for RedHat-specific configuration
PSGConf::Control::Resolver(3)
psgconf control class for DNS resolver configuration
PSGConf::Control::SASL(3)
psgconf control class for SASL configuration
PSGConf::Control::SharedLibrary(3)
psgconf control class for controlling shared library locations
PSGConf::Control::ShellStartupFiles(3)
psgconf control class for shell startup files
PSGConf::Control::Shells(3)
psgconf control class for generating /etc/shells
PSGConf::Control::Solaris(3)
psgconf control class for Solaris-specific configuration
PSGConf::Control::TCPWrappers(3)
psgconf control class for TCP wrappers
PSGConf::Control::TSM(3)
psgconf control class for TSM backup client
PSGConf::Control::Users(3)
psgconf control class for user accounts
PSGConf::Control::cron(3)
psgconf control class for cron configuration
PSGConf::Control::dtlogin(3)
psgconf module for CDE Login Manager configuration
PSGConf::Control::inetd(3)
psgconf control class for inet services
PSGConf::Control::motd(3)
psgconf control class for generating /etc/motd
PSGConf::Control::qpopper(3)
psgconf control class for qpopper configuration
PSGConf::Control::sendmail(3)
psgconf control class for sendmail
PSGConf::Control::sshd(3)
psgconf control class for sshd
PSGConf::Control::sudo(3)
psgconf control class for sudo
PSGConf::Control::swatch(3)
psgconf control class for swatch syslog reporting
PSGConf::Control::syslog(3)
psgconf control class for syslog
PSGConf::Data(3)
base class for PSGConf data types
PSGConf::Data::Boolean(3)
boolean data type class for PSGConf
PSGConf::Data::ConfigError(3)
psgconf data obj class for signalling config errors
PSGConf::Data::Enum(3)
enumerated data type class for PSGConf
PSGConf::Data::FileTest(3)
psgconf data obj class for signalling config errors
PSGConf::Data::Hash(3)
hash data type class for PSGConf
PSGConf::Data::Integer(3)
integer data type class for PSGConf
PSGConf::Data::List(3)
list data type class for PSGConf
PSGConf::Data::String(3)
string data type class for PSGConf
PSGConf::Data::Table(3)
table data type class for PSGConf
PSGConf::DataStore(3)
Base DataStore module for psgconf
PSGConf::DataStore::AppConfig(3)
config file data store class for psgconf
PSGConf::DataStore::ConfigFile(3)
config file data store class for psgconf
PSGConf::DataStore::Storable(3)
binary config file data store for psgconf
PSGConf::Import::group_info(3)
psgconf-import module to parse input
PSGConf::Import::inittab(3)
psgconf-import module to parse input
PSGConf::Import::pkg_default_versions(3)
psgconf-import module to parse input
PSGConf::Import::ports(3)
psgconf-import module to parse input
PSGConf::Import::shells(3)
psgconf-import module to parse input
PSGConf::Import::user_info(3)
psgconf-import module to parse input
PSGConf::Util(3)
Extra Utility functions for PSGConf Modules
Parse::PerlConfig(3)
parse a configuration file written in Perl
Parse::PlainConfig(3)
Parser for plain-text configuration files
Perl::Critic::Config(3)
The final derived Perl::Critic configuration, combined from any profile file and command-line parameters
Perl::Critic::Exception::AggregateConfiguration(3)
A collection of a set of problems found in the configuration and/or command-line options
Perl::Critic::Exception::Configuration(3)
A problem with Perl::Critic configuration
Perl::Critic::Exception::Configuration::Generic(3)
A problem with Perl::Critic configuration that doesn't involve an option
Perl::Critic::Exception::Configuration::NonExistentPolicy(3)
The configuration referred to a non-existent policy
Perl::Critic::Exception::Configuration::Option(3)
A problem with an option in the Perl::Critic configuration
Perl::Critic::Exception::Configuration::Option::Global(3)
A problem with Perl::Critic global configuration
Perl::Critic::Exception::Configuration::Option::Global::ExtraParameter(3)
The configuration referred to a non-existent global option
Perl::Critic::Exception::Configuration::Option::Global::ParameterValue(3)
A problem with the value of a global parameter
Perl::Critic::Exception::Configuration::Option::Policy(3)
A problem with configuration of a policy
Perl::Critic::Exception::Configuration::Option::Policy::ExtraParameter(3)
The configuration referred to a non-existent parameter for a policy
Perl::Critic::Exception::Configuration::Option::Policy::ParameterValue(3)
A problem with the value of a parameter for a policy
Perl::Critic::OptionsProcessor(3)
The global configuration default values, combined with command-line values
Perl::Critic::PolicyConfig(3)
Configuration data for a Policy
Perlanet::Trait::YAMLConfig(3)
configure Perlanet through a YAML configuration file
Perlbal::Manual::Configuration(3)
How to configure Perlbal
Perlbal::Manual::ReverseProxy(3)
Configuring Perlbal as a Reverse Proxy
Perlbal::Manual::Selector(3)
Configuring Perlbal as a virtual service that maps onto other services
Perlbal::Manual::WebServer(3)
Configuring Perlbal as a Web Server
Perlbal::Plugin::Include(3)
Allows multiple, nesting configuration files
Plack::Middleware::Debug::PerlConfig(3)
Debug panel for Perl configuration information
Plack::Middleware::Log4perl(3)
Uses Log::Log4perl to configure logger
Plack::Middleware::LogDispatch(3)
Uses Log::Dispatch to configure logger
Plagger::Plugin::CustomFeed::Debug(3)
Feed in config.yaml
Plagger::Plugin::Subscription::Config(3)
Subscription in config.yaml
Plagger::Plugin::Subscription::PlanetINI(3)
read subscriptions from Planet Planet's config.ini
Plagger::Plugin::Widget::Simple(3)
Simple widget creation using config
Prima::VB::CfgMaint(3)
maintains visual builder widget palette configuration
Qpsmtpd::ConfigServer(3)
a configuration server for qpsmtpd
SNMP::Info::CiscoConfig(3)
SNMP Interface to Cisco Configuration Files
SPOPS::ClassFactory(3)
Create SPOPS classes from configuration and code
SPOPS::ClassFactory::DBI(3)
Define additional configuration methods
SPOPS::ClassFactory::DefaultBehavior(3)
Default configuration methods called from SPOPS.pm
SPOPS::Manual::Configuration(3)
Description of variables used in the SPOPS configuration process
SPOPS::Tool::DBI::Datasource(3)
-- Embed the parameters for a DBI handle in object configuration
SPOPS::Tool::LDAP::Datasource(3)
-- Embed the parameters for a LDAP handle in object configuration
SQL::Dialects::Google(3)
SQL::Dialects::Google -- Google config file for SQL::Parser
SVK::Command::Depotmap(3)
Create or edit the depot mapping configuration
SVK::Command::Resolved(3)
Remove conflict mark from checkout items
SVK::Resolve(3)
Interactively resolve conflicts
SVN::ACL(3)
is a simple fronend to make the svnserve.conf, passwd, authz for Subversion.To use the mod_dav_svn, it requires the subversion 1.3.0 or later
SVN::Hooks::UpdateConfFile(3)
Maintain the repository configuration versioned
SVN::Notify::Config(3)
Config-driven Subversion notification
SVN::Notify::Mirror::ConfigData(3)
Configuration for SVN::Notify::Mirror
SVN::Notify::Snapshot::ConfigData(3)
Configuration for SVN::Notify::Snapshot
SVN::S4::Config(3)
Get subversion config values
SVN::Web::ConfigData(3)
Configuration for SVN::Web
Samba::LDAP::Config(3)
Config file related tasks for Samba::LDAP
Servlet::Config(3)
configuration super interface
Servlet::FilterConfig(3)
filter configuration interface
Servlet::ServletConfig(3)
servlet configuration interface
ShipIt::Conf(3)
-- holds/parses config info for a project
Sledge::Plugin::Log(3)
Sledge Log configurator
Solr::Schema(3)
Reads user defined fields from solr config file schema.xml
Sphinx::Config(3)
Sphinx search engine configuration file read/modify/write
Spoon::Config(3)
Spoon Configuration Base Class
Spork::Config(3)
Spork Configuration Class
Squatting::With::PerHostConfig(3)
vary %CONFIG based on $c->env->{HTTP_HOST}
Statistics::PointEstimation(3)
Perl module for computing confidence intervals in parameter estimation with Student's T distribution Statistics::PointEstimation::Sufficient - Perl module for computing the confidence intervals using sufficient statistics
Syntax::Highlight::Engine::Kate::Apache_Configuration(3)
a Plugin for Apache Configuration syntax highlighting
Syntax::Highlight::Engine::Kate::WINE_Config(3)
a Plugin for WINE Config syntax highlighting
Syntax::Highlight::Engine::Kate::Xorg_Configuration(3)
a Plugin for x.org Configuration syntax highlighting
Template::Config(3)
Factory module for instantiating other TT2 modules
Template::Manual::Config(3)
Configuration options
Test::LectroTest::TestRunner(3)
Configurable TAP-compatible engine for running LectroTest property checks
Text::Diff::Config(3)
global configuration for Text::Diff (as a separate module)
Tk::ConfigSpecs(3)
Defining behaviour of 'configure' for composite widgets
Tk::FileDialog(3)
A highly configurable File Dialog widget for Perl/Tk
Tk::Getopt(3)
User configuration window for Tk with interface to Getopt::Long
Tk::grab(3), grab(3)
Confine pointer and keyboard events to a window sub-tree
Ubic::Admin::Setup(3)
this module handles ubic setup: asks user some questions and configures your system
Ubic::Multiservice::Dir(3)
multiservice which uses directory with configs to instantiate services
Ubic::Multiservice::Simple(3)
simplest multiservice, configured in constructor
Ubic::Settings::ConfigFile(3)
single ubic config file
Unix::ConfigFile(3)
Perl interface to various Unix configuration files
VCP::ConfigFileUtils(3)
utilities used to parse or create vcp config files
W3C::LogValidator::Config(3)
[W3C Log Validator] Configuration parser
WWW::Robot(3)
configurable web traversal engine (for web robots & agents)
WWWdb::ConfigFile(3)
ConfigFiles for WWWdb
WWWdb::ConfigPool(3)
ConfigPools for WWWdb
Web::Scraper::Config(3)
Run Web::Scraper From Config Files
Workflow::Config(3)
Parse configuration files for the workflow components
Workflow::Config::Perl(3)
Parse workflow configurations as Perl data structures
Workflow::Config::XML(3)
Parse workflow configurations from XML content
XML::SAX::Machines::ConfigHelper(3), XML::SAX::Machine::ConfigHelper(3)
rarely needed config routines
XML::Simple(3)
Easy API to maintain XML (esp config files)
Xango::Config(3)
Global Xango Config
Xmms::Config(3)
Perl Interface to xmms_cfg API
YAML::AppConfig(3)
Manage configuration files with YAML and variable reference
ZConf(3)
A configuration system allowing for either file or LDAP backed storage
ZConf::BGSet(3)
A perl module for background management
ZConf::Bookmarks(3)
ZConf backed bookmark storage system
ZConf::Cron(3)
Handles storing cron tabs in ZConf
ZConf::Cron::GUI(3)
Implements a GUI for ZConf::Cron
ZConf::GUI(3)
A GUI backend chooser
ZConf::Mail(3)
Misc mail client functions backed by ZConf
ZConf::RSS(3)
ZConf backed RSS fetching
ZConf::RSS::GUI(3)
Provides various GUI methods for ZConf::RSS
ZConf::RSS::GUI::GTK(3)
Providees the GTK backend for ZConf::RSS::GUI
ZConf::Runner(3)
Run a file using a choosen methode, desktop entry or mimetype
ZConf::Runner::GUI(3)
Various GUI stuff for ZConf::Runner
ZConf::Runner::GUI::Curses(3)
Run a file using a choosen methode, desktop entry or mimetype
ZConf::Runner::GUI::GTK(3)
The GTK GUI backend for ZConf::Runner
ZConf::Weather(3)
A ZConf module for fetching weather information
ZConf::backends::file(3)
A configuration system allowing for either file or LDAP backed storage
ZConf::backends::ldap(3)
This provides LDAP backend for ZConf
ZoneMinder::Config(3)
ZoneMinder configuration module
ZoneMinder::ConfigAdmin(3)
ZoneMinder Configuration Administration module
ZoneMinder::ConfigData(3)
ZoneMinder Configuration Data module
inc::Module::Install(3)
Module::Install configuration system
psgconf-intro(3)
introduction to psgconf
CPAN::FirstTime(3)
Utility for CPAN::Config file Initialization
CPANPLUS::Internals::Source::Memory(3)
In memory implementation n .SS "$cb->_|_memory_retrieve_source(name => $name, [path => $path, uptodate => BOOL, verbose => BOOL])" .SS "$cb->_|_memory_retrieve_source(name => $name, [path => $path, uptodate => BOOL, verbose => BOOL])" Subsection "$cb->__memory_retrieve_source(name => $name, [path => $path, uptodate => BOOL, verbose => BOOL])" This method retrieves a storabled tree identified by $name. It takes the following arguments: "name" 4 Item "name" The internal name for the source file to retrieve. "uptodate" 4 Item "uptodate" A flag indicating whether the file-cache is up-to-date or not. "path" 4 Item "path" The absolute path to the directory holding the source files. "verbose" 4 Item "verbose" A boolean flag indicating whether or not to be verbose. Will get information from the config file by default. Returns a tree on success, false on failure. n .SS "$cb->_|_memory_save_source([verbose => BOOL, path => $path])" .SS "$cb->_|_memory_save_source([verbose => BOOL, path => $path])" Subsection "$cb->__memory_save_source([verbose => BOOL, path => $path])" This method saves all the parsed trees in storabled format if Storable is available. It takes the following arguments: "path" 4 Item "path" The absolute path to the directory holding the source files. "verbose" 4 Item "verbose" A boolean flag indicating whether or not to be verbose. Will get information from the config file by default. Returns true on success, false on failure
Carp(3), carp (3)
warn of errors (from perspective of caller) cluck - warn of errors with stack backtrace (not exported by default) croak - die of errors (from perspective of caller) confess - die of errors with stack backtrace
Config(3)
access Perl configuration information
Config::Extensions(3)
hash lookup of which core extensions were built
Encode::Config(3)
-- internally used by Encode
ExtUtils::MakeMaker::Config(3)
Wrapper around Config.pm
FcConfigAppFontAddDir(3)
Add fonts from directory to font database
FcConfigAppFontAddFile(3)
Add font file to font database
FcConfigAppFontClear(3)
Remove all app fonts from font database
FcConfigBuildFonts(3)
Build font database
FcConfigCreate(3)
Create a configuration
FcConfigDestroy(3)
Destroy a configuration
FcConfigEnableHome(3)
controls use of the home directory
FcConfigFilename(3)
Find a config file
FcConfigGetBlanks(3)
Get config blanks
FcConfigGetCache(3)
DEPRECATED used to return per-user cache filename
FcConfigGetCacheDirs(3)
return the list of directories searched for cache files
FcConfigGetConfigDirs(3)
Get config directories
FcConfigGetConfigFiles(3)
Get config files
FcConfigGetCurrent(3)
Return current configuration
FcConfigGetFontDirs(3)
Get font directories
FcConfigGetFonts(3)
Get config font set
FcConfigGetRescanInterval(3)
Get config rescan interval
FcConfigHome(3)
return the current home directory
FcConfigParseAndLoad(3)
load a configuration file
FcConfigSetCurrent(3)
Set configuration as default
FcConfigSetRescanInterval(3)
Set config rescan interval
FcConfigSubstitute(3)
Execute substitutions
FcConfigSubstituteWithPat(3)
Execute substitutions
FcConfigUptoDate(3)
Check timestamps on config files
FcFini(3)
finalize fonconfig library
FcInit(3)
initialize fontconfig library
FcInitBringUptoDate(3)
reload configuration files if needed
FcInitLoadConfig(3)
load configuration
FcInitLoadConfigAndFonts(3)
load configuration and font data
Log::Message::Config(3)
Configuration options for Log::Message
Module::Build::ConfigData(3)
Configuration for Module::Build
Module::Build::Notes(3)
Create persistent distribution configuration modules
Net::Config(3)
Local configuration data for libnet
Tcl_RegisterConfig(3)
procedures to register embedded configuration information
calendar_conf(5)
Grid Engine calendar configuration file format
checkpoint(5)
Grid Engine checkpointing environment configuration file format
complex(5)
Grid Engine complexes configuration file format
config(1), npm-config(1)
-- Manage the npm configuration file
config(3), npm-config(3)
-- Manage the npm configuration files
config(4)
Configuration file
config(5ssl)
OpenSSL CONF library configuration files
e2fsck.conf(5)
Configuration file for e2fsck
erts_alloc_config(3)
Configuration tool for erts_alloc
extcheck(1)
A utility to detect jar conflicts extcheck detects version conflicts between a target jar file and currently installed extension jar files
fconfigure(n)
Set and get options on a channel
fonts-conf(5), fonts.conf(5)
Font configuration files
g.mkfontcap(1), g.mkfontcap (1)
Generates the font configuration file by scanning various directories for fonts
get(1), npm-config(1)
-- Manage the npm configuration file
get(3), npm-config(3)
-- Manage the npm configuration files
gethostbyaddr(1), "gethostname(1)
-" 1i get local hostname. "gethostbyname -" 1i get local host information for specified hostname. "gethostbyaddr -" 1i get hostname via IP address. "getservbyname -" 1i get configured port number of service
grab(n)
Confine pointer and keyboard events to a window sub-tree
host_conf(5)
Grid Engine execution host configuration file format
httpd_conf(3)
Configuration utility functions to be used by the Erlang Web server API programmer
jinfo(1)
Configuration Info
knife-configure(1)
Generate configuration files for knife or Chef Client
knife-role(1)
Group common configuration settings
krb5.conf(5)
Kerberos configuration file
ldap.conf(5), .ldaprc(5)
LDAP configuration file/environment variables
load(3), npm-load(3)
-- Load config settings
matchpathcon(8)
get the default security context for the specified path from the file contexts configuration
mke2fs.conf(5)
Configuration file for mke2fs
pcre-config(1)
program to return PCRE configuration
pkg-config(1)
Return metainformation about installed libraries
qconf(1)
Grid Engine Queue Configuration
queue_conf(5)
Grid Engine queue configuration file format
sched_conf(5)
Grid Engine default scheduler configuration file
set(1), npm-config(1)
-- Manage the npm configuration file
set(3), npm-config(3)
-- Manage the npm configuration files
sge_conf(5), ge_conf(5)
Grid Engine configuration files
sge_pe(5), ge_pe(5)
Grid Engine parallel environment configuration file format
smi_config(3), smiInit(3), smiExit(3), smiSetErrorLevel(3), smiGetFlags(3), smiSetFlags(3), smiLoadModule(3), smiGetPath(3), smiSetPath(3), smiReadConfig(3)
SMI library configuration routines
snmpa_conf(3)
Utility functions for handling the agent config files
snmpm_conf(3)
Utility functions for handling the manager config files
venti-fmt(8), buildindex(8), checkarenas(8), checkindex(8), conf(8), fmtarenas(8), fmtbloom(8), fmtindex(8), fmtisect(8), syncindex(8)
prepare and maintain a venti server
x509v3_config(5ssl)
X509 V3 certificate extension configuration format
xb-apache-config(8)
X-Bone specific Apache configuration
xb-ldap-config(8)
X-Bone specific LDAP configuration
xbone-gui.conf(5)
The X-Bone GUI configuration file
xbone.conf(5)
The X-Bone Node Daemon configuration file
xml2-config(1), xml-config(1)
script to get information about the installed version of GNOME-XML
home | help